Curve 8520 unlock - unlocking code "ME-Code" required

Hi,
I have an old but working Curve 8520.
It was used as prepaid mobile in Germany. Now after 2years time, I can unlock the mobile officially by sending the IMEI Number and getting a 16 diget code back.
After entering the "new" SIM card Curve 8520 is now asking for a ME-CODE !!
I tlaked to the store people but nobody seems to able to help.
The unlock code i recieved seems not to be the ME-CODE to unlock my BB
Any feedback is more than welcome
Cheers from Germany
Best
Marco

Sorry, in 1o years of using a BlackBerry, unlocking my own devices and helping others, I have never heard of a "ME-Code".
I would suggest you contact your mobile provider and inquire.
Or, try another SIM card.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Unlock my blackberry Curve 8520: Enter service provider mep code (0) left

Good afternoon,
A few days ago I bought a BB Curve 8520 from a friend but the phone says:
"enter service provider mep code (0) left"
Is it possible to fix this problem?
Regards,
Julian

Someone tried too many bad attempts to enter an unlock code in the device.
After the ten attempts have been used, you must get RIM to unlock the device.
There are two routes, and only two, to achieve this.
* IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
* If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
Make sense? Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BlackBerry Curve 8520 - in need of unlocking code

I want to unlock my BB Curve 8520, so that I can use it in Europe with a local sims card when
visiting family, etc.
Anybody any idea how to do that??
I asked ATT, but they told me I had to go to RIM to get this............ RIM says I have to to my carrier
to get this................
Thanks for quick responses!
Loekie Maddra
Solved!
Go to Solution.

Did you buy the device from AT&T? Do you have an account with them?
They should give you the unlock code for free, tell them you are traveling internationally and need it.
The local reps in the store likely can't help you. Call ATT direct.
There is no real VoIP for BlackBerrys yet, other than Google Voice.
and UMA calling which ATT does not offer.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do i kindly reset my MED 0 so that i can unlock my curve 8520

i have have mistakenly exceeded the 10 MED options giving to me to unlock my blackberry curve 8520. and the counter is now 0 MED. i kindly want to know how i can reset the counter. thank you.

Hi and Welcome to the Community!
Please see this helpful thread to start:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
If you have used up all of your chances to enter the correct unlock code, there is nothing further you can do. Even if you happen to have now the correct code, it is useless. Only the factory can now (legally) unlock your BB. Typically, I've heard that the cost of having BlackBerry do this for you will be greater than the cost of just buying a new one. But, you are able to ask them...see here:
http://us.blackberry.com/support/programs/technical/incident.jsp
Note, however, that this process will start with a fee...
If you obtained your unlock code from somewhere but it was incorrect, your recourse could be with them -- however, they may well question why you exhausted all 10 attempts before contacting them.
If your BB was already MEP locked and you obtained it from a source that represented it as being able to be unlocked, then your recourse would be with the seller you obtained it from.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Curve 8520 no longer requests unlock password

Hi there,
I have had my Curve 8520 for almost 4 years now and today all of a sudden the password to unlock my device no longer appears. I am unsure as to why this has happened but does me no favors because now anyone can get into it. I have tried disabling it and re-enabling it but with no luck.
Solved!
Go to Solution.

OK thank you. Please understand that what I'm trying to do is properly understand your situation...if I misunderstand it, I could potentially give you incorrect advice, some of which could be quite catastrophic indeed. So my understanding of your actual and full situation is critical to preventing that from happening.
So something has changed on your BB to change how it was previously working. Since you are not on BES, it then typically would be Content Protection or Encryption...with those turned ON, you must have a device lock password assigned. Since you can't recall anything that changed, we will then first treat this as "random strange behavior"...
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unlock blackberry curve 8520

i have a black berry curve 8520 and it is locked on a network (mobinil egy) so when i tried to unlock it i go to
advanced option ===> sim card then i write "MEPD" it shows the information then when i write "MEP2" it dosen't ask me to enter the code
so i want to know if i can fix that ?
and if there are any other ways to unlock it please tell me about them?
and what is the latest software version for my device ?
and if i installed a soft ware will it be unlocked?

hossam55 wrote:
i have a black berry curve 8520 and it is locked on a network (mobinil egy) so when i tried to unlock it i go to
advanced option ===> sim card then i write "MEPD" it shows the information then when i write "MEP2" it dosen't ask me to enter the code
so i want to know if i can fix that ?
and if there are any other ways to unlock it please tell me about them?
Hi and Welcome to the Community!
There is only one legal way to unlock a BB...refer:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
If you have used up all of your chances to enter the correct unlock code, there is nothing further you can do. Even if you happen to have now the correct code, it is useless. Only the factory can now (legally) unlock your BB. Typically, I've heard that the cost of having RIM do this for you will be greater than the cost of just buying a new one. But, you are able to ask them...see here:
http://us.blackberry.com/support/programs/technical/incident.jsp
Note, however, that this process will start with a fee...
If you obtained your unlock code from somewhere but it was incorrect, your recourse could be with them -- however, they may well question why you exhausted all 10 attempts before contacting them.
If your BB was already MEP locked and you obtained it from a source that represented it as being able to be unlocked, then your recourse would be with the seller you obtained it from.
hossam55 wrote:
and what is the latest software version for my device ?
Please refer to this official download portal as you proceed. It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
http://us.blackberry.com/support/downloads/download_sites.jsp
hossam55 wrote:
and if i installed a soft ware will it be unlocked?
If your BB is properly unlocked, there is no (legal) software you can install that would re-lock it. Likewise, there is no (legal) software you can install to unlock it. Only the above procedure or the BlackBerry factory can do that (legally).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Code MEP pour BB Curve 8520.

Hi,
When I turn on the phone with my new SIM card I have to note the MEP code !
I need MEP code for my BB curve 8520.
Edited content to comply withCommunity GuidelinesandTerms and Conditions of Use.
Thank you

Please see the link below to the Guide to unlocking BlackBerrys.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry Curve 8520 OS 4 Remove Speed Dialing Code

Hi i have an older Blackberry 8520 OS 4 which i am trying to remove the "1" dialing code
Instructions for newer OS say to change the "Country Code" in "Smart Dialing" to a chosen country or "unknown"
This is in the newer OS and Bold 9900
In OS 4 I can find no such setting
Can someone please help me find it
thank you

Hello redlake,
Welcome to the BlackBerry Support Community.
The following section from the BlackBerry Curve 8520 smartphone user guide for OS 5 should help as the steps for Smart Dialing should be the same:
http://bbry.lv/Z06nUI
Thank you,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Curve 8520 keypad randomly unlocks

My wife has just started using a Curve 8520 and has had it for less than 1 month. In the past few days, they phone has started unlocking itself randomly. She's using the 'A' button to lock the keypad at which point the screen goes off (as I believe it should) and then after a minute or so, it unlocks itself and the screen comes back on.
Can anyone suggest something we might have missed, or a reason for this behaviour?
Cheers!
Solved!
Go to Solution.

Ok if it happens anymore then I'll talk you through a OS reload

How do you unlock ipod touch security code

how do you unlock ipod touch security code

As far as I'm aware you're referring to the passcode. It seems that you've forgot the passcode that you've inserted, so your best bet is to connect your iPod to iTunes and have it restored back to factory settings. You'll be able to find the restore button by clicking on your iPod's name that's located right below the "Device's Tab."

HT201274 Can a Sprint Iphone 5 work with T-mobile network? How can one unlock with the MSL code? Sprint is not abiding by the Unlocking Consumer Choice and Wireless Competition Act. FCC will only enforce if we file more complains.

Can a Sprint Iphone 5 work with T-mobile network? How can one unlock with the MSL code? Sprint is not abiding by the Unlocking Consumer Choice and Wireless Competition Act. FCC will only enforce if we file more complains.

T-Mobile is a GSM network whereas Sprint is a CDMA network. They are incompatible. Sprint is not obliged to unlock a phone that is still under contract. Their phones may not be capable of being unlocked.

HT1414 how to unlock a forgotten pass code ?

How do I unlock a forgotten pass code on my iPod touch?

Connect the iOS device to your computer and restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Unlock the machine generated code - NetBeans

In Netbeans IDE how to unlock the machine generated code.
i.e:
if we create a GUI form it automatically put some lines to it.
IDE Generated Code
How can i edit those lines???
ugp

As long as you continue to use NetBean's editor, it will continue to regenerate the blue code and overwrite your changes.
Solution 1 - stop using the NB editor to change the code. You will no longer be able to use NB's graphic UI when you use another editor, so you should finalize the layout first.
Solution 2 - use NB's capabilities that allow you to add custom code to the blue code. Each component's Properties windows shows a Code button at the top, which lists Pre-Creation, Post-creation, Pre-Init, and Post-Init Code entries. Each of these allow you to create code and insert it at the location specified.

Help required with upgrading to OS5 on curve 8520

Hello everyone,
I'm using an unlocked version of the bb curve 8520 and want to upgrade my bb device os to v5.0. (current version- 4.6.1)
I tried using the application loader on the bb website (NA & India both) but it just tells me that my OS is updated and that i will be notified if there are any updates available. I would be really grateful if someone could help me update my os.
Solved!
Go to Solution.

Hello,
Your warranty is not endangered. You are free to use any carriers OS package on your BB. Your carrier may, however, refuse to provide you with support (including Warranty evaluation/service) until you fall back to their supported device OS level. But your warranty per se is not endangered.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Please provide the abap code for this requirement

note : if the below mentioned user exit is not suitable please find the suitable user exit and provide the code for this requirement.
     The User-exit MEFLD004 is only to be used at PO level (ME21N/ME22N).
     When PO is create or changed (ekko-ebeln) user exit MEFLD004 is triggered which check for the business requirement of the PO check for PO doc types (ekko-bsart) :z4,z6,z11,z12 from the table ekko and Account Assignment Category (knttp) is either N or K then stock process follows.
     When an PO is cancelled, all entries will have to be reversed
     The Buffer table for the PO will have the following fields:
Purchase order Number                     EKKO-EBELN
Line item number of the PO               EKPO-EBELP
Vendor Number                                  EKKO-LIFNR
PO Quantity                                        EKPO-MENGE
PO Nett Price                                     EKPO-NETPR
Base Unit of Measure                  EKPO-LMEIN
Account Assignment Category          EKPO-KNTTP
PO Doc type                       EKPO-BSART
Plant                            EKPO-WERKS
Purchase Org                                  EKKO-EKORG
Purchase Group                    EKKO-EKGRP
Company code                                EKPO-WAERS
Item category                     EKPO-PSTYP
PO Doc Date                     EKKO-BEDAT
     No duplications are allowed for any created, changed or cancelled purchase orders. If such a case occurs, the record will be updated with the latest update time stamp. This custom table will be keyed by purchase order number.

Cross-post: http://forum.java.sun.com/thread.jspa?threadID=763485

Curve 8520 unlock - unlocking code "ME-Code" required

Similar Messages

Maybe you are looking for