Curve 8520 Won't turn on after removing battery.

Hello, I've recently purchased a 8520, I've not had it for long but already it isn't working.
I removed the battery the other day andante it back in, from this point... It will not turn on, when I charge it, it just shows as 'Charging'.
Please help, It wont turn on, I've tried everything... Oh but also if I place someone else battery in, it works...
I noticed some kind of 'Jump start' but never understood it.
Thanks greatly ;D

Try this: 
Leave the device to charge 2-3 hours, and then, still connected to the charging cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Blackberry Curve 8520 won't turn on or charge

    My blackberry curve 8520 will not turn on,there was a red light on for a minute! Took out my sim card,memory card & battery and tried to charge it then. It came up for literally one second a drained battery sign. Really don't want to send it away, any help would be great Thanks!

    Leave the device to charge 2-3 hours, and then, still connected to the charging cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Curve 8520 won't turn on all the way, please help!

    I have a blackberry curve 8520, i bought it last month sometime.
    I woke up yesterday morning and the balckberry was off, and would not switch on after i pushed down the ON button. So I charged it for a while, and still, it wouldnt switch on. Then, i took it off charge, took out the battery put the battery back in and it rebooted. The loading bar went right to the end, and the logo of my service provider appeared. And that's when it stopped loading. All that will show is the logo, it wont turn off, unless i take the battery out again.
    I had downloaded an app the night before it stopped working off appworld, could that have affected it? I tried to link it to my computer, but it wont let me remove or add applications.
    I did take out the battery for hours, and the SD card. It still wiil only turn on until my service provider's logo.
    PLEASE HELP! Any advice would be helpful. 
    Solved!
    Go to Solution.

    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • LIveView won't turn on after removing from watch strap

    I removed the LiveView from the watch strap to charge it and it turned off.  I must have jostled it somewhere.
    It won't turn on and the LED doesn't come on to indicate it's charging.
    I seems the battery may have come loose.  Do I need to pry it open or is there an optimal location to smack it to get the battery to reseat itself?

    Found the right place to smack it.  Whacked it with some BBQ tongs and was able to turn it back on.
    I'll be more careful in the future.  This is the second time it's done this in the last week or so.

  • BlackBerry Curve 8520 Won't turn on

    Hi all,
    Yesterday my BB8520 froze and I pulled out battery and pull in again after i pull in the phone doesn’t wont to start it just blink my led red 1 long and after series of 4 short blinks.
    I read a lot of forums and I tried everything like loader and etc. but the main problem is that my pc doesn’t recognize my bb. I already try with different cables and other pc but steel same story.  I put on wall charger to be charged all night but nothing change as well I pull out my battery more than 4 hours nothing change again it’s any possibility this phone to be putted in some kind of flash mode which will help to be recognized by my pc. And steel I don’t know does it charge my phone when is in this mode because I think that I have only 3 stripes when I pull out my battery.
    Many thanks

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Rmbp 13" 2014 won't turn on after sleep battery drain

    Hi peeps,
    Today, my rmbp 13" from 2014 failed to start after it's battery ran dry while it was sleeping.
    I have let it charge for a while (about 15 minutes) and then it wanted to turn on again.
    My question is: is this normal behavior? I found another thread with kind of the same question but it was irrelative due to other issues being present in that particular thread.
    Best regards,
    IT07.

    Possibly, but somethings may be left under the user's control.
    About Batteries in Modern Apple Laptops
    Battery University
    Apple - Batteries - Notebooks
    Apple - Batteries
    Extending the Life of Your Laptop Battery
    MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
    Apple Portables- Calibrating your computer's battery for best performance
    Mac notebooks- Determining battery cycle count

  • Wireless keyboard won't turn on after changing battery

    This is what happened:
    I got a message yesterday telling me that the battery for my wireless keyboard was low and I should replace them. This morning, before I switched on my Mac, I put in new battery for the wireless keyboard. Then I switched on my Mac. And I got a message on the screen saying that There's no keyboard connected and couldn't find any keyboards. I thought that maybe I need to turn on the keyboard to make it work. So I pressed the power button and noticed that the green light doesn't even come up..
    What's going on? Is my wireless keyboard already dead??
    Any advice would be appreciate it. Thanks.

    Possible fix to non pairing blue tooth devices.....
    I have a BTMMouse- quite new. The original lithium batteries died and I replaced them with alkaline. It would connect but refused to pair. Went on the MM discussion board which had over 300 similar problems with both MM and BT keyboards, with absolutely no solutions from Apple or anyone!
    I have an Apple Care plan, so I called and was told to shut down. Then remove the power cord from the back of my iMac, wait one minute, plug it back in. Fire up, and then attempt to set up a new device in BT. It worked on the first try. Then to double check, I shut down and restarted and the mouse stayed connect and paired!

  • G62 wont turn on after removing battery whilst in use

    okay so i reinstalled windows, and needed some drivers, the model number is under the battery, i pulled the battery out(whilst it was on) and then noticed a few mins later the screen was black, switched it off and on and still the same the power light is solid, the wlan light is solid orange and the chargeing light is on, no beeps nothing else. iv tried the various hold the power button down fixes and nothing, have checked both ram modules and they seem fine, anything else i can try? or is it possible i blew something? iv often done this on my dv6 and it never done any harm?

    edit: also when i have the battery in i get a solid cap lock light along with the rest, i dont get anything on screen or external screen, but can hear the machine running, fan starts off loud for a few seconds, then quietens down but can still hear it running very quietly

  • What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • MacBook Pro 15" won't turn on after a shut down.

    My MacBook Pro 15" late 2008 mavericks won't turn on after a shut down. Tried SMC reset, plugged and unplugged charger multiple times as well as installing the battery. It has started that after a while I have replaced my old battery with a new one,upgraded to Mavericks and increased my memory to 4GB. In the beginning after I would install every time the battery ,it' would turn on after 8-10 tries. Today it's completely unresponsive . Tested different outlets, with and without battery,nothing worked. I also heard that some other people have this issue once they have updated their operating system from  10.5.8 to Mavericks. Is that the problem.? Has anyone found a solution to this?

    Hi there Olgabinou,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    -Griff W. 

  • Hello... can anyone help, my late 2010 MBA's - OS X Lion 10.7.5 wifi won't turn on after a deep sleep

    can anyone help, my late 2010 MBA's - OS X Lion 10.7.5 wifi won't turn on after a deep sleep.. thanks..!

    Hi John,
    Thanks for the additional information.  What I would try next is resetting System Management Controller:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    If this still doesn't help, it would be time to take it in to be looked at.  You can setup an appointment at a Genius Bar by clicking on the following link:
    http://www.apple.com/retail/geniusbar/
    Best,
    Sheila M.

  • My N73 ME won't turn ON after I install PC Suite.

    My Nokia N73 Music Edition won't turn ON after I update the version of my PC Suite from V 3.0638.0.0.30 to V 4.0727.2.2.1
    can somebody help me with this I can no longer use my N73 ME now
    and I don't what to do to resolve this problem and I need your help.
    Personal Information RemovedMessage Edited by adisaily on 10-Sep-2007 06:30 AM

    Hey! Don't mind.
    First Off, you upgraded your phone, not PC Suit.
    You most probably did it by using PC Suit (PC suit uses Nokia Software Updater) to upgrade it.
    I suspect there was some fall out while downloadin or installin the updates.
    Earlier I would advise people to go to nearest Nokia Care centre.
    Now, the 3 fingers action might cure it well,though I'm not sure.
    The method:
    --The number 3---the * star----The green call key--- .
    If the phone still cant turn on.
    Then, if you have any warrenty and have a nokia care centre near you, make a trip to there.
    They will cure it.

  • 3G still won't turn off after hitting home and sleep button at same time. Any other ways to try?

    3G still won't turn off after hitting home and sleep button at same time. Any other ways to try it?

    And when you held them neither the red Off slider nor the Apple logo appeared?
    If not then your sleep button is broken, you will need to get it serviced.

  • Mac 10.6 won't turn off after update

    Macbook air a1304 won't turn off after updating unless you push on/off button.

    Phone your nearest HP Support  to request warranty service. Worldwide contact info can be accessed here>Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • IPhone won't turn on after brief blue screen.

    My iPhone is currently broken, won't turn on after a blue screen appeared briefly. Won't even connect to my PC or iTunes. Won't even charge with my charger or using a new charger from a family member. Won't hard reboot by holding home top button. Anyone know what my situation is? Checked over the internet and couldn't find any similiar situations. Also this occured after i was browsing Reddit so nothing intense was occuring on my phone at the time.

    I'm afraid you'll have to get it looked at by visiting an Apple Store or Authorized Service Provider next to your place or by contacting Apple:
    Apple - Support - Service Answer Center

Maybe you are looking for

  • Windows 7 Boot Camp Color Scheme Issues

    Hi. I just recently installed Windows 7 Ultimate on my Boot Camp, and the first thing I noticed was the poor resolution that was stuck to 1600x1200 pixels. The Display Adapter used is listed as "Generic Non-PnP Monitor on Standard VGA Graphics Adapte

  • Vista with Windows 7 upgrade

    If I get a Windows 7 upgrade disk and install it over my current Vista, and then upgrade to Lion, what will I have to do if I ever need to reinstall Windows 7 since I will only have it as an upgrade disk? I don't want to buy a full version for the on

  • I minimized some ribbons (navigation, for example) and now I can't get it back - how do I go to Mozilla Properties?

    I minimized all but the "tabs" ribbons on the top of the screen - now I cannot get the navigation ribbon (toolbar?) back, so I have no way to enter a URL, reload, etc. I can't figure out how to view the tools menu.

  • Kerberos Authentication Setup for MSCRM in cross forest oneway trust environment.

    Dear All, Kindly help related to implement Kerberos authentication on CRM application with multiple Forest environment. My environment details are as below: Number of forests: 2 1. First is with name of domain1.local 2. Second is with name of domain2

  • LOAD_PROGRAM_LOST and  CONVT_CODEPAGE

    Hi Guys! Need very urgent help , may be someone knows this. In today our Prod. server has gone mad . In sm21 and st22 are many dumps(> 1000 , and new every 3-5 second) and errors like : LOAD_PROGRAM_LOST and  CONVT_CODEPAGE.  From users side the T-co