Curve 8530 Has Stopped Responding During Wipe - I'm In Deep Trouble!

Hi Gang,
I'm in a bit of a jam and hopefully someone here can assist. I've searched the forum for an answer but couldn't locate one.
I have a Blackberry Curve 8530 and it's been experiencing some freezing from time to time.
Model: BlackBerry Curve 8530
Carrier: Koodo Mobile (Canada)
Software Version: 5.0 Bundle 1108
I decided tonight to backup all of my data and do a "Security Wipe" from the options menu.
I selected both options, typed "blackberry" and clicked "wipe".
I currently have the popup on my screen that says:
"Erasing Information...
Warning: Do not pull the battery out until erasing is complete."
On top of this popup is the dreaded little Blackberry clock with the spinning hand going around and around (like an hourglass would on a PC when it's "thinking").
It's been like this for almost two hours now and doesn't appear to be responding any longer.
The clock will occasionally disappear, only to re-appear a minute later.
I'm scared to pull the battery because it warns not to on the popup. I've tried to power it off with the Power Button but to no avail. No buttons do anything.
What should I do? I've never had an issue like this and I'm worried that I'll be in for a lot of headaches if I pull the battery.
Can anyone offer any advice or assistance? Have you run into this issue before? What happens if I pull the battery contrary to their warning not to?
I'm kind between a rock and a hard place...and it's 2:45AM here on the East Coast of Canada...want to try to get this fixed before I go to bed if anyone is awake and reading this.
Many, Many Thanks In Advance,
Jeff
Device: Blackberry Curve 8530
Carrier: Koodo Mobile (Canada)
Software Version: 5.0 Bundle 1108
Solved!
Go to Solution.

Yea it did... I kept thinking "what on earth is taking so long" but after about 3 hours or so it stopped and was fine... Just don't press anything lol

Similar Messages

My itunes has stopped responding how can I get it working again

My itunes has stopped responding how can I get it working again?

I have a related issue (I think, hard to know for sure from the short frustrated post above).
Since the last update of iTunes (11.0.5), it kind of freezes while checking for and downloading new podcasts. Processor load goes to 100% (sometimes above! figure from Swedish OSX "Aktivitetskontroll" which I can imagine is something like "Activity Control" or "Activity Manager" in English OSX) and stays there for a few minutes, 3-5 minutes is common. During that time the mouse pointer turns into a spinning ball when moved above iTunes. Other apps work ok meanwhile. (Four processors)
Have a fixed connection to the internet, which I have tested while iTunes is frozen. We acheive above 100 Mbit/s downstream, 20 Mbit/s upstream, so the connection shouldn't be the problem.
Any ideas on what to do?
iTunes 11.0.5 (Swedish)
MacOSX 10.8.4 (Swedish)
iMac 27", late 2009 http://support.apple.com/kb/SP576

InDesign Stops Responding During Launch

I'm having a problem with InDesign CS2 (v 4.0.5) on a Mac running OSX 10.3.9. It's been working fine for months, but now when I start InDesign, it stops responding during the "Executing Startup Services" phase.
I've deleted all of the preference files for InDesign, as well as the .plist file. I even removed InDesign from the system and re-installed it, but I'm still having the same problem.
Note that all of the other CS2 applications work fine.
Does anyone have any suggestions for correcting this problem?
Thanks

CS2 runs just fine here in XP mode. I suspect the problem is the activation, which can no longer be accomplished becasue the activation servers were shut down. For licensed users of CS2 programs Adobe has posted downloads of versions that do not require activation at Adobe - CS2 Downloads

ICloud server has stopped responding

When I select contacts to sync with iCloud, I get the iCloud server has stopped responding.

I'm getting the same problem. iCloud wasn't working (which happens every couple weeks) so I uninstalled and then reinstalled it which always worked until now. Now during setup I ge the iCloud server has stopped working message. I have tried everything...rebooting, re-installing, etc. Nothing works

InDesign stops responding during the Packaging process.

Design stops responding during the Packaging process. It says it will only take a few seconds, stalls, and then stops responding. Please help!

This normally means that the phone has been jailbroken and discussion of jailbroken phones is not permitted in these formus as it is a violation of the Terms of Use. You'll have to find a solution using Google, if you can.
Copied from http://support.apple.com/kb/TS3694#error1015 :
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

Using the internet on my iphone 4s is sooo slow it takes ages to load, sometimes it doesnt load at all and says connection has stopped responding...confused??

Just upgraded to the new iphone 4s about a week ago, to be honest ive never had sooo many problems with a phone before.
Wen trying to use the safari browser it takes aages to load and i mean ages! sometimes it doesnt even load at all it says connection timed out? or connect has stopped responding? can anyone tell me why? all connections are on. i have reset it but still have the same problem. also my app store doesnt work and apps that i have downloaded for iphone e.g facebook and gmail they dont work either. im paying alot a month for this phone to just call and text people!! im on vodafone b ut signal is full where i live. can any one help meee please
Thank yoou
Vicky x

Check Settings > General > Cellular > Cellular Data and make sure it's "On".

Tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

Hey there Alex,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue installing iCloud Control Panel on your PC, you’re seeing an alert message related to an iCloud server not responding. Take a look at the article linked below and try running through the troubleshooting steps it provides.
iCloud: iCloud Control Panel setup cannot be started - Apple Support
So long,
-Jason

I have tried to transfer files from my windows media player to my ipod but it saysthe device has stopped responding or stopped working.this is the first time ive connected nmy ipod to my new pc.any ideas?

I have tried to transfer music from my windows 7 media player to my ipod.This is the first time i have tried to use my ipod on my new computer .In the media player it doesnt give me the option to add to itunes library it just give me the option to send to my ipod and when i do this it says that the device has stopped responding or isnt working.Any ideas? coz i aint got the foggiest where i am going wrong.My ipod keeps telling me to update the software,but then will i lose the music thats already on my ipod?

You should import the music (that is listed in Windows Media Player) into your iTunes Library - on your computer - to add it to your existing iTunes Library. I take it you have moved (or copied) your music from the old computer to the new computer, haven't you?
Then Sync your iPod to that Library.
iPods will not respond to Windows Media Player, they're designed to connect to iTunes.

Windows Server Essentials Connector stops responding during install Win 7 Pro to 2012 R2

I am trying to reconnect a Win 7 Pro computer to a new Essentials 2012R2 and when it asks me to set it up for just me or multiple users a message pops up saying
it has stopped responding. It sets up a profile of _clientsetup_$ and it shows up in dashboard as an offline device. This computer was hooked up to an Essentials 2012R2 previously. Tried uninstalling the connector software, removing the computer from the domain,
renaming the computer and re-installing the connector software from the http://(server)/connect. Even tried backing up the existing profiles and creating a new clean one and went through the above procedure with the same results. I set up 4 others
with no issues and it would be the bosses computer that fails. I am a newbie so any help would be greatly appreciated, thanks.

Hi,
Sorry for my interrupting.
Would you please let us know whether this problematic client computer was upgraded to Windows 7 Pro from a previous OS? Did you install any third-party application on this Windows 7 Pro client computer? Just a confirmation, thanks for your understanding.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Rundll32.exe has stopped responding

When I install Ghost v14 on the T500, after reboot the DVD drive has a yellow exclamation mark on it with "the device is not responding properly" and an error pops up with "rundll32.exe has stopped responding", and also the power Manager icon on the task bar stops showing.
I can correct the problem with the DVD drive by removing an entry in the registry but the rundll32.exe error will never go away.
When I uninstall Ghost, all works fine, and then the error goes away, odd!
Has a anyone experienced this with Ghost and know why it causes these problems, with the DVD drive, Power Manager and the rundll.exe error?
Log Name:      Application
Source:        Application Error
Date:          17/01/2009 22:33:25
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      208252G
Description:
Faulting application rundll32.exe, version 6.0.6000.16386, time stamp 0x4549bb52, faulting module ntdll.dll, version 6.0.6001.18000, time stamp 0x4791adec, exception code 0xc015000f, fault offset 0x00000000000603f1, process id 0x1c0, application start time 0x01c978f39520fc13.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-01-17T22:33:25.000Z" />
    <EventRecordID>4097</EventRecordID>
    <Channel>Application</Channel>
    <Computer>ST-208252GAEM4T</Computer>
    <Security />
</System>
<EventData>
    <Data>rundll32.exe</Data>
    <Data>6.0.6000.16386</Data>
    <Data>4549bb52</Data>
    <Data>ntdll.dll</Data>
    <Data>6.0.6001.18000</Data>
    <Data>4791adec</Data>
    <Data>c015000f</Data>
    <Data>00000000000603f1</Data>
    <Data>1c0</Data>
    <Data>01c978f39520fc13</Data>
</EventData>
</Event>
Any help would be greatly appreciated.
Thanks
S
Message Edited by styoda on 01-18-2009 03:29 AM
Message Edited by styoda on 01-18-2009 03:30 AM

Anyone installed Ghost v14 on their T500?

Itunes has stopped responding

I have tried every thing suggested i this forum about fixing this. The message I get is that iTunes has stopped responding, Windows is looking for a solution to the problem. Then it wants to close iTunes. This only happens when i try to access the store. My music and podcasts and everything else works fine. Just can't go to the store. Just downloaded the lates and greates version of iTunes. Below is the error i get in the event viewer and of course windows Tech support is no help. Never ever had an error in the event viewer had a solution to a problem of any kind.
Log Name:      Application
Source:        Application Error
Date:          11/16/2013 9:40:19 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ols2
Description:
Faulting application name: iTunes.exe, version: 11.1.3.8, time stamp: 0x5274a87d
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16408, time stamp: 0x523d4548
Exception code: 0xc06d007e
Fault offset: 0x00012eec
Faulting process id: 0x1a54
Faulting application start time: 0x01cee2ea6a23adb3
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Report Id: c6cbdcc6-4edd-11e3-bee7-606c6697e8b0
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-11-16T16:40:19.000000000Z" />
<EventRecordID>73904</EventRecordID>
    <Channel>Application</Channel>
    <Computer>ols2</Computer>
    <Security />
</System>
<EventData>
    <Data>iTunes.exe</Data>
    <Data>11.1.3.8</Data>
    <Data>5274a87d</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.3.9600.16408</Data>
    <Data>523d4548</Data>
    <Data>c06d007e</Data>
    <Data>00012eec</Data>
    <Data>1a54</Data>
    <Data>01cee2ea6a23adb3</Data>
    <Data>C:\Program Files (x86)\iTunes\iTunes.exe</Data>
    <Data>C:\WINDOWS\SYSTEM32\KERNELBASE.dll</Data>
    <Data>c6cbdcc6-4edd-11e3-bee7-606c6697e8b0</Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>

See the following post for how to resolve. The fix involves copying a file from one directory to another. Very easy.
https://discussions.apple.com/message/24271500#24271500

I am trying to import from camera using windows 8.1 and I get a message that Lightroom program has stopped responding. Ideas?

Lightroom has stopped responding. That's what I get when I try to import images from my D7100 into the library. I'm (foolishly, no doubt,) using windows 8.1. Can anyone help?

It is lightroom 5.7. I will have to try to run it again to get the exact
message, but essentially, it is "the program has stopped responding".
thanks!
Janice

My ipad 2 has stopped responding to tap commands after updating to ios 8.2

After updating the IOS to 8.2 the ipad has stopped responding to commands in Safari or any other application. The touch screen is functional as I can punch my password to unlock the ipad.
How to solve this problem
Regards
Prabhat

Try to give it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple let go and let it reboot and see if that helps

My ipad 2 home button has stopped responding completely. Any suggestions

My ipad 2 home button has stopped responding completely. Any suggestions?

Take it in for repair or replacement.

Curve 8530 Has Stopped Responding During Wipe - I'm In Deep Trouble!

Similar Messages

Maybe you are looking for