Curve 8530 is sending gibberish when replying to messages

My 8530 just started sending gibberish when I reply to my business e-mails. This started the week before last and is random with some reply clear and others in gibberish. Any assistance would be appreciated.

OK...then more details please. Especially -- since you said "work", is this BES? If so, you need to work with your BES admins.
If this is not BES, then I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

No Send buttons when replying to messages.

Hey Mac Users,
When I try to reply to an email and click on "reply" the window that comes up has the adress lines, subject and body, but no buttons across the top for Send, Chat, Attach, Address, etc. To actually Send, I have to close, Save as Draft, then go into Drafts folder. After I double click on the message, then Send button shows up.
Did I accidently turn off some feature?
Feeling really dumb...
Any help would be much appreciated.
I am also digging around on this site a bit more and apologize in advance if I have posted in the wrong place.
Thanks!
iMac Mac OS X (10.3.9)

jamiestar,
When in Reply, go to the View menu and see if you can select Show Toolbar.
Sincerely,
No Alibi.
 Backup what you can't afford to lose. Mac OS X (10.4.9)

Turn off selection of text when replying to message.

I have asked this before and received a solution but I am using a different computer now and I can't find the old answer. It was under tools/options/advanced. I want the entire message I am replying to included in the reply and not just any text that happens to be selected. (I wish this was possible for printing also but it wasn't the last time I asked.)
I am using TB 24.5.0 on Win 7.

Tools > Account Settings > Composition & addressing for the mail account
* Select: Compose messages in HTML format
* select: Automatically quote the original message when replying
* select: 'start my reply above the quote' or other option
if you have a signature:
* select: place my signature 'below my reply (above the quote) or other option
* select: include signature for replies
* select: include my signatur for forwards
* click on OK to save changes
There is the option to reply quoting only specifc sections of the email.
If you preselect/ highlight any text in the email and then use Reply, you are instructing Thunderbird to only quote highlighted text. This is also the same for printing.

Can't send email when replying on email

I’m now using iPhone and facing a problem of replying email by using my handphone. This problem persists when I stay in HCM, but it seemed to be ok when I travelled to Hanoi last month.
Please advise.
Thanks,

Contact the email provider and get the correct email account settings.
It should not matter what city or country you are in to send email, but there may be other factors which you are not aware are important and have left off.

Mail Yosemite: icon "send"missing when reply to an e-mail

Dear all,
I upgraded my macbook air to yosemite a few days ago. Everything went smoothly, but I have a problem with Mail.
Every time I click on the icon to reply (or reply all), a new window opens and I can write my answer BUT at the top of the window, all the icons are missing (see the image in attachment).
Then, the only way I have to send the e-mail is to save the reply as a draft and then re-open the draft. Only at this point the icons appear again!
Could someone help me? Has anybody had the same problem?
Cheers.

sorry i should have been more clear - this is an issue on my i-phone not my MAc Book

Why do I get message send failure when replying to a text received on my i phone

I receive texts from a number in my contacts but when i try to send a text it says Not Delivered followed by ! (in red font)

Hello backhere
If you are having issues sending either SMS or iMessages, then check out the article below. It will have you look over your settings as well as checking the Date and Time for your iPhone to make sure that the messages can get sent out properly.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Regards,
-Norm G.

Palm pre - when replying to messages - all formatting in previous messages is lost

with the pre - if I reply to an email all the formatting is lost. eg -get an email, I reply to that email, all the people that I reply to lose all formatting when they view the message that I sent in reply - it is like all the hard returns are lost and they see just one string of content.. Do others experience this issue?
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

http://pdfvia.com/showfile-2686/preemailformatting.pdf
Using outlook it happens to me as well. Notice the difference in page 1 & 2 of the pdf
it also doesn't display things correctly on the Pre from outlook. I'll explain in a bit once i get screenshots...
Message Edited by djwhitey on 06-09-2009 09:13 AM

Firefox crashes when replying to messages on Facebook

This is the most annoying crash, although it crashes frequently. When I'm responding to a message on Facebook, it crashes only if I type in a long message. I can do short replies fine, but if it's more than a paragraph, FF crashes. I saw this on here before, but there was no solution. Have you found one yet?
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/532.9 (KHTML, like Gecko) Iron/4.0.280.0 Chrome/4.0.280.0 Safari/532.9

Please give me the crash report ID. Press '''CTRL+ L''' to Go to the address bar then type '''about:crashes'''.
Copy and paste the entire page here and I will be able to figure out your problem

After update, when replying to message, I cannot just start typing..

I now have to scroll down to the message body and touch the screen. This seems a small thing but it's a total pain in the butt.
I would like to downgrade my software back the the older version that this worked in, or fix it.
Is there any way to downgrade or fix this behaviour?
Thanks.

You can downgrade back down to 10.1 if you really want to using Blackberry Link. Instructions are below, there should be an option to pick an OS to reload to. I've never tried it because I like the new 10.2 update. Give it a few more days to see if you get use to it, then if you feel like going back to 10.1 you can with the steps below. Warning, all files will be lost during the reload. Make sure you transfer any pictures, documents, or music you want to keep to your computer.
-Open BlackBerry Link and connect your device via microUSB
-Select Settings (gear icon)
-Select Reload under Reload Device Software
-Follow the on-screen instructions to reload the software. When complete you can disconnect your device.

How do I select a sender when replying/forwarding email on z10?

Current setup:
I have a Gmail and two other accounts. All mail from two other accounts is forwarded to Gmail.
I set up all three accounts on Z10.
When composing a new email, I can select any of the three accounts as a sender.
When replying to / forwarding a message, the sender is always set as Gmail, regardless of which address the message was sent to.
Question:
Is there any way to select a sender for reply/forwarded message on Z10 from the list of email accounts?
Please do not offer to switch off forwarding; I am not going to check three emails on other computers I use to work with emails.
Solved!
Go to Solution.

Currently, you can't change the sender when replying or forwarding. It will use whatever account the mail came from on the device.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

BB Curve 8530 - PLEASE HELP ME?

Hi,
     I have a BB Curve 8530. Last wk when I upgraded my BB app world, most of my apps/icons disappeared. When I
look in my app world or thru applications from the options field, I see that they are there, but they're not on my screen
where I once saw them & was able to use them from there. Where did they go? For instances: FB, Mobile Banking,
Yahoo Messenger. I've downloaded them over & over, but they won't appear on my home screen. Can someone
please help me get them back? Thx   .

Hi and welcome to the forums deedee55!
A couple of places for you to visit: Blackberry 101    Tips & Tricks
Hey, how about shedding that visitor status and becoming a member.
Try looking in all the folders on your device homescreen and let us know how it goes.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Outlook: "Send Immediately when connected" not working for Word 2010

When i disable the option in Outlook "Send Immediately when connected" the messages are placed in the Outbox until i send them manually.
But when i want to send a Word 2010 document from within Word 2010 by E-Mail the message is send immediately.
Is it possible to place the message/document in the Outbox just like with Outlook?
Thnx in advance.

Hi,
I cannot reproduce this problem in my environment. When I send a Word document by clicking File > Save & Send > Send as Attachment, it just go to the Outbox like the common message.
Does this issue happen to all Word documents at any time?
What's the send/receive interval you set in your Outlook? It could still occur that your message will be sent near instantly when you send a message right before the automatic send/receive interval takes place.
For more information, please refer:
http://www.msoutlook.info/question/181
Regards,
Steve Fan
TechNet Community Support

Email Aliases & Replying to Messages

I have Mail on my iPhone setup for email aliases (not Mobile Me aliases). It works great for maintaining a single inbox while still being able to send messages from the various aliases.
However, when replying to messages, Mail always defaults to the main account, regardless of which alias the original message was sent to. In Mail on OS X, when replying to a message, it automatically changes the ‘From’ address to the alias the message was sent to. Is this not possible on the iPhone? I would much rather not have to manually chose which account to send the message from every time I am replying.

Nope, no such luck, at least for now. That's a change Apple would need to make in a future update. You can request it...
http://www.apple.com/feedback/iphone.html.

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful. Mid 2013 iMac.

I don't know how rare this is. I went a week or so without a problem, and now it's starting to recur. Also, in some instances, an email will look unsent (remain in the outbox on the Treo), but it has been sent, and recipients are replying while I'm trying to figure out what is going on. Further, it will send the same email over and over during this madness.
This is a show stopper. If there isn't a software fix soon, I may chuck this phone in the garbage.
Post relates to: Treo 800w (Sprint)
UPDATE: The problem comes and goes. The next day, no changes to the treo, everything workeds. Now i'm suspecting the sprint server, and how it/the phone responds from failing to send while roaming. I've since turned off roaming, and haven't had a problem for several days.
Message Edited by slrichardson on 12-22-2008 01:12 PM

When replying to an email with � in the message it sends blank but when forwarding it changes to and goes threw fine

I dont understand what Thunderbird is doing. This happens when replying to a quote with a ® within the email. Forwarding it keeps it as a ® but just hitting reply it changes to � and sends a blank email.

You see the � (&#xfffd;) when an 8 bit encoding like ISO-8859-1 is selected.<br />
It would normally be sufficient to select Unicode (UTF-8) to see the real character.

Curve 8530 is sending gibberish when replying to messages

Similar Messages

Maybe you are looking for