Curve 8900 Device Software for Rogers - CORRUPT INSTALL FILE

Hello all,
I was wondering if anyone else ran into this issue (if there's some Rogers BlackBerry people on this board). I tried downloading and running the device software for Rogers off the BlackBerry site and during the installation, I came across the following error:
"Error 1335. The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a netowkr error, an error reading from the CD-ROM, or a problem with this package."
When I try clicking ignore, I get this message:
"Error 2350. FDI server error"
I wish I was good enough to know what this means, but I'm completely lost here. I've tried installing this on two computers (XP Home SP2) and Vista, both give me the same problem.
I get the feeling there may be an issue with the software on the site. Could anyone else confirm this or have an idea of what to do?
Thanks
-Antonio-
Solved!
Go to Solution.

you're absolutely right
It is something like a lottery. Guess a lucky hour for downloading a file

Similar Messages

Reloading Curve 8900 device software

Hi I am having trouble with my Blackberry device software, how do I delete and re intsal the software on my Curve 8900?
Solved!
Go to Solution.

Manual device OS upgrade instructions:
1. First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion and unplug BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/
3. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
5. This step is not needed unless there is an issue on next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a complete backup) then after you get the error 507 (no OS installed) then proceed to step 6
6. remove internet connection to PC and reboot PC.
7. Plug in BlackBerry and double click on "Loader.exe." It's located in the same place as the above vendor.xml file was in.
8. if you did Step 5, restore from back up. Follow this KB if needed http://www.blackberry.com/btsc/KB10339
Enjoy the new OS.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Curve 8900 Device Software

Hi,
Has anyone tried using Vodaphone software BlackBerry Handheld Software v5.0.0.661 (Multilanguage) for a T-Mobile phone?
Thanks in advance for your replies.

Anyone?
I just might give it a try later tonight.

Is there Mac software for repairing corrupted pdf files?

Using Mac 10.5.8, Adobe Acrobat Pro 9.3.2.
Many of my pdf files are encrypted on a sparsebundle disk image, as they are personal financial files.
Randomly files become corrupted, and even though I back up, it is a recurring and very time-consuming problem.
It's basically the only problem I have with my system, and because of the importance of the files very frustrating.
There are PC-based file repair programs. I've come across references to a command-line program, but hey, I'm a Mac user, right?
Is there anything?
And while we're at it, what can I do to prevent files from becoming corrupted? These are files from my scanner, not downloaded.
Thanks
sjtill

See this list for Cameras that are compatiblie with iMovie. Almost all Sony cameras made in the last 5 years work with iMovie, so odds are high that your camera will work. The only exception is that some manufacturers have started providing 60P cameras. These cannot be used at 60P in iMovie (or on a TV set for that matter). But these cameras typically have other settings like 30P or 60i that work fine.
The bundled software with the Sony is Windows software. They do not bundle Mac software with Sonys because iMovie comes with every Mac anyway, and that is all you need.
I think your camera works with an SDHC card. You can easily insert the SDHC card into a card reader and import the footage. New iMacs have card readers built into the side. In iMovie, you just start iMovie. Then insert the card and wait for iMovie to see it. Or you can click the camera icon on the middle toolbar if it does not see it.
You can also attach your camera via USB. In this case, the camera must be plugged into wall power, and you attach via a USB cable.
Follow the instructions in the manual for how to set the controls of the camera during import.
Edited to add...You need a Mac with at least an Intel Processor to import from this camera. Older PowerPC models (G5, G4) will not work. Even with them you can get third party software to convert to a form iMovie can handle.

Need Device Software for V4.2.2.65

Hi Everyone,
I am looking for device software V4.2.2.65. I have checked it here
http://na.blackberry.com/eng/support/downloads/download_sites.jsp for all the operators and also the O2 site, could not find it anywhere.
Can anyone let me know where I could get the device software for the below specifications
Blackberry Curve 8300 V4.2.2.65 (PLATFORM V2.4.0.28)
Thanks & Regards
Ponnu

THANK YOU FOR THE ISO!!!
It worked flawlessly.
However, I did a messy job of installing it. I had installed the beta drivers before using the iso, and then when I installed the CD and its drivers none of the utilities worked. I then tried uninstalling the utilities but the installation stalled and failed repeatedly. Luckily, I had the option to system restore, but it was on a save point in the middle of installation. So its a pretty sloppy job.
One thing: when switching between modules (EQ, or volume control, or EAX); there is a 6 second wait.
Also, EAX reverb does not work well on Soundfonts (very faint reverb, but definetely not sufficient).
But thank you very much for saving my life.

Need Device software for Telus 8330/O.S. 4.3.0.124

Hey Everyone.
This is my 1st post here. I'm looking for the device software for OS 4.3.0.124 for the Curve 8330. Both the BlackBerry site here, and the Telus site, do not have the software, so this seems like a big oversight for RIM. If you could provide the link or give me some info on how I can obtain it, I would appreciate it.
Thanks in advance.
-- Lonnie (aka javatyger)

The device software was released a couple days ago:
https://www.blackberry.com/Downloads/browseSoftware.do;jsessionid=Z7jzsFlGB7DyMpEqCl3iLw
-- Lonnie (aka javatyger)

What is the best sound conversion software for making apple sound files?

What is the best sound conversion software for making apple sound files?

Depending on the file formats, you may not have to do any conversion.
The following shows what the native Quicktime Player Supports:
http://support.apple.com/kb/HT3775
and Quicktime Player is pretty much the core for all Apple app
playback.
And if that doesn't cover it, there are other players, many of
which are free, that may cover what you need (WINAMP, VLC,
Songbird etc.).

Curve 8900 - 'Reload Software 513'

My Son was given a Curve 8900 and has used it for months without any problems. Yesterday some of his friends messing about tried to access his phone and put in wrong pin number several times.
His phone is now showing a message 'Reload Software 513'
We have never syncrinised this phone with the internet, so not sure how we go about sorting out this problem, so any advise would be appreciated.
Thank you.

Hello JaxT,
Perform a hard reset by removing the battery from the BlackBerry smartphone and reinserting it. For more information on this procedure, see KB02141.
If the error message persists, perform a reload or upgrade the BlackBerry Device Software. For more information on this procedure, see KB10144.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Curve 8330 device software not supported by Playbook

There is no update to the device software on BB Curve 8330!!! I just purchased the playbook and found out I need to have OS 5 or higher. I currently have 4.5 and there is no update offered by my provider! How can I get the OS 5?

Pegster wrote:
Exactly! I called my provider Bell and they say my phone is not compatible. Contrdicts the BB site! Next stop RIM!! Maybe they can offer a solution. In the meantime the playbook rocks!!!!
Hello,
Bell as usual is not being straight to their customers.
RIM has released OS5 for the carriers. Each carrier decides to test those OS5 and when they are satisfied with the OS, they release it to the public.
Boost Mobile has released OS5 for 8330 for the public, you can get it here : http://us.blackberry.com/support/downloads/download_sites.jsp
On the other hand, Bell has not.
If you wish to install Boost's OS on your device, it is possible :
go here: http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/bd-p/BlackBerryDeviceSoftware
top of list, the grey topics are floated
among the floated topics, one is named "How To Reload Your Operating System"
read that topic
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

USB device not recognized/device software was not successfully installed

IPOD touch 4 also not showing up in ITUNES

Just fixed my ipod nano problem on my own and figured I'd share as I have just spent the last 4 hours trying to trouble shoot all of Apple's problems...following everyone's tips...nothing worked until I figured it out on my own.
I'm running windows 7 and have an Ipod Nano (6th Gen). Hard drive crashed on computer. Replaced HD. Everything works fine now. Downloaded iTunes along with all other programs. Nano wouldn't show up or sync on iTunes. Said Device Driver Software was not successfully installed (some USB problems). Tried everything. Finally, I figured it out.
Disconnect Nano. Uninstall iTunes AS WELL AS
Apple Application Support, Apple Mobile Device Support, and Apple Software Update. Apple only
tells you to uninstall iTunes and reinstall..restart computer bla bla bla. I said screw it and uninstalled all Apple programs (well, the listed ones above). I hooked up my nano to my computer to make sure the device manager recognized it without anything else plugged in...and it did. I unplugged it. Reinstall iTunes and all three other Apple programs listed above will also reinstall. I opened iTunes and plugged in my nano. It started with the "installing device driver software" and I was sure
it wasn't going to work. Well, it did work. My nano showed up in the upper right bar of iTunes and synced. Unreal... I unplugged my nano and plugged in the wife's. Once again, "installing device driver software." Voila! Her's showed up and synced too. I plugged mine back it to make sure it worked and it did. I'm done. It's working. Hope these steps work for you as well.

Installed Photoshop cc 2014 asks for serial # - corrupted Windows file permissions

More of a warning / heads up to all than a question - installing Photoshop cc 2014 [via the CC manager app] caused some Windows file (security) permissions to become corrupt corrupt on my system. Symptoms include cc2014 asking for serial number validation on startup (when, as a cloud version, it should not do so), then being unable to connect to the internet when you press the 'validate serial' button so getting that window into infinite loops, and - a real pain in the *** when trying to fix the above - causing abends of some windows shell functions that in turn cause windows explorer to crash and restart.
Anyhow, digging into this (fortunately, I am a long time Windows SysProg) I discovered that for reasons unknown, either the CC master app or the actual Photoshop cc2014 installer (or both) are changing file access control permissions on a number of files, mostly DLL's. Most of the files affected are in the (normally hidden) Program Data directory on the windows root disk, Some of them are in the Adobe subdirectory - so fair enough if they want to fool around with their own program - but others being changed are in the Common Files and Microsoft subdirectories. I cannot for the life of me figure out why this is necessary nor why Adobe feel the need to touch files that 'do not belong' to them - something dangerous in the extreme as an external app such as Windows Update might replace or 'repair' the files so touched, and if Adobe / CC are relying on file permissions on non-Adobe files, such changes could result in all manner of random and spurious problems / error messages occurring.
Anyhow, if, fellow Photoshop cc 2014 user, you get this happen to you then you can fix the file permissions by opening a console window [also called a "DOS box", or "command prompt" depending on your age and knowledge... 8-) ] and run the windows file checker with the command
"sfc /scannow". Make sure that you use 'run as administrator' to open the console window, or you'll get an error about sfc only being available to administrators. Also a very (very) sensible idea to close all non-essential running applications first to prevent any possibility of weird interactions happening.
Finally, check that the 'hosts' file in [root drive]:/Windows/System32/drivers/etc is valid - for some reason, it looks like the install tried to check or update this file (again, I have no idea why) but the result was a corrupted hosts file, which I assume is the root cause of the 'unable to connect to host' type internet error messages. Copy the file, rename it as 'hosts.txt' and edit it with notepad or wordpad. Look for lines containing garbage strings at the bottom of the file (any line that starts with a # ignore, it is a comment, and any line that has IP addresses or host names should be ignored - though if they reference a site such as "someserver.adobe.com" you might want to treat them with suspicion if you continue to get internet 'cant connect to site' type errors.
Anyhow, when I fixed these two sets of problems, Photoshop cc 2014 started 'right first time' without all the BS messages about serial numbers etc.
Hope this helps somebody out there in AdobeLand......
Rick

Update: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.

Bootcamp utility in OSX Lion tries to format my Drive when i only want to download the support software for my existing install...

So i have a bit of a problem...
im using a Mid 2009 13 Inch Macbook Pro in dualboot.
Im running OSX Lion and Windows 8 Consumer Preview in dual boot, no problems...
However i only have bootcamp 3.x software on my Windows install and i want to install 4.x ...
i know that to get the 4.x software i have to use the Bootcamp utility in Lion to download it, here is where the problem is...
i run the utility and check the box next to download support software and uncheck the rest (i dont want to format my install or remove it) and im prompted for a save location, which i set to my desktop (because i can read it from windows). it then informs me that its trying to format my Drive... My System drive!? all i want is the software, nothing else...
is there a way i can download it directly? such as i direct link to the software from the servers?

Read carefully. You have to download the software to a FAT32 formatted USB flash or hard drive.

Updating Device Software For Torch 9800

Every time I try to update my device software it backs up Ok and the gives me the following message:
An error has occurred while downloading software for your device. Please verify your Internet connection or try again later, if the problem persists.
I have an internet connection through my desktop. Does it need to connect through my Blackberry device or does my desktop connection suffice.
I would appreciate anyones help with this.

Hey col253col253,
Welcome to the BlackBerry Support Community Forums.
Have you tried performing the update through www.blackberry.com/update?
If not, I would suggest trying.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

BUG 8900 Device Software 5

With the last versione of the official device software, in my case 8900M_PBr5.0.0_rel760_PL5.2.0.42_A5.0.0.461_TIM_Italy.exe the button key lock doesn't work. This a a device software bug because in other version the button function is OK.
I tried also an other device but with the same device software I advice the same problem.
How can I resolve?
Thanks

madilall wrote:
Is it possible to adivertise RIm in order to obtain a new software faster?
yes you just need to contact your carrier and tell them about that issue. They will contact RIM about it.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Palm OS Software for Windows 7 - Calendar files disappeared

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I have had a similar problem this last w/e. I think there may have been some MSoft auto system updates around the same time. When I rebooted system, Palm desktop (4.1.4) came up with empty calendar - as is last few months missing, had somehow gone back to an old directory. I've looked for the current files everywhere, and also tried looking for and un-deleting files with Recuva (free prog).
I looked in C:\Users\ADMIN\AppData\Local\VirtualStore\
I also looked in C:\Program Files (x86)\
However it probably did not help that I thought the datebook.dat files I did find were current, so I removed and re-installed Palm desktop so that I could get Palm to load these files. Previous files were then unrecoverable, however even on files that Recuva identified as unrecoverable, they were not large enough to have been original files. Looking for datebook file of around 12MB.
I had a backup of Palm files, but was about 2 months ago, so a lot of valuable data lost. Why did Palm files go missing? I just don't know. If anyone can explain this to me, that would be great. Bonus points for telling me how I can miraculously recover all my data. No bonus points for telling me that I should be using latest version of Palm desktop (I want the task colours, for example) or that I should be backing up more regularly..

Curve 8900 Device Software for Rogers - CORRUPT INSTALL FILE

Similar Messages

Maybe you are looking for