Curve 8900 restarts during call

Onto my second curve 8900 from Hong Kong in a week after the first had a power leakage from motherboard (fried travel charger and ran down battery really quickly) and reset during calls.  Got a replacement but it's also restarting during calls.  Any ideas?  Could it be a software issue?

Did you try reset of device by pulling the battery out?
I think you would be better of by replacing the device.
tanzim                                                                                  
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

  • 6500 CLASSIC-Restart during calls

    I have had it with this one. Its a known fact that there is this issue with this phone, that it restarts during calls to a white screen.
    Lets start counting how many people on this forum are having this issue, and eventually lets hope that nokia would finally stop cheating us out of a bad quality product

    Restart during calls is a fault that shows up in many different models, i think its the first time i heard in 6500 Classic.
    Firmware update won't likely do anything about that, but calibrating your antenna will probably fix it (can only be done by nokia care points thou). Sometimes also happens while using a old SIM card version, just try to test your phone with a recent SIM card before you take your phone to repair.
    Regards,
    Rodolfo Rangel

  • My BB Curve Keeps Freezing During Calls

    Help please, does anyone know why my BB keeps freezing during calls?

    Hi there,
    First check two setting within your device :
    On your Homescreen go to Options > Device > Storage > Make sure " Enable Compression " is UNchecked or UNmarked .
    Homescreen > Options > Security > Advanced Security Setting > Memory Cleaner > Br sure it is Disabled .
    Then Check again , But if you already have those setting as I suggested then Boot your device on Safe Mode :
    KB17877 : How to start a BlackBerry smartphone in Safe Mode
    On Safe Mode don't try to Click or run any application , Just make a few phone calls to see if your device freezes again, If freezing cease then those freezing issues are caused by any of your Installed 3rd party applications . All you can do is delete one application at a time then reboot and check unless you find the original culprit responsible for this issue .
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • HT4623 Please help ! My Iphone 5 is restarting during a call or internet browsing, o just simply browsing the meniu. I can not us it any more !

    Please help ! My Iphone 5 is restarting during a call or internet browsing, o just simply browsing the meniu. I can not us it any more !
    It is functioning max 5 minutes. I have tried to restore it via Itunes but it sitais to less opened.

    Hello neegie
    Try putting your iPhone into recovery mode and then use iTunes to restore it. After that then test it out. If during the restore you get and error code, check it against the second article for further assistance.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Regards,
    -Norm G.

  • FREE Call & SMS Blocker for Curve 8900

    Is there anyone know an application for blocking unwanted call & SMS FREEWARE for Curve 8900???
    like black&whitelist... but i don't want the shareware...
    Thanks a lot.

    I don't know of a free one. You can also look at iCallManager.
    Meanwhile if you want to block ALL SMS messages, you can do that at Options > Security > Firewall settings and check the items you want blocked completely.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • E50 restarts during the call

    Hi, my E50 sometimes restarts during a call.. usually you can hear a buzz for a few seconds and then it restarts.
    It happend before updating to the newer firmware, but after this it happens more often.
    There are only 4 applications (GnuBox, Xlator, AutoLock & Maps) installed on it and 1GB Toshiba memory card within.
    Any ideas ??
    Thanks in advance.

    I would take it to a nokia service point you can get your nearet at the undernoted weblink ;-
    http://www.apps.nokia.co.uk/clubnokiaservice/
    Today Me Tomorrow You

  • Upgrade - SAP will not restart during MAIN_NEWBAS/STARTSAP_NBAS phase

    We are upgrading from 4.7 to NW 7.0 (SP#5)
    SAP will not restart during the phase MAIN_NEWBAS/STARTSAP_NBAS
    We had to manually apply the kernel (NW 7.2 -#63 - NON UC). This looks OK when we calll DW -version. The T03 system will not start either through the upgrade tool or manually. There is no useful log in
    \usr\sap\T03\DVEBMGS15\work
    The upgrade tool reports this error.
    Checks after phase MAIN_NEWBAS/STARTSAP_NBAS were negative!
    Last error code set: RFC call to subst_get_uvers failed with key
    RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM GWHOST=CSIAS9, GWSERV=sapgw15, SYSNR=15 
    LOCATION CPIC (TCP/IP) on local host with Unicode
    ERROR partner 'CSIAS9:3315' not reached
    TIME Wed Aug 31 15:09:36 2011
    RELEASE 720 COMPONENT NI (network interface)
    VERSION 40 RC -10
    MODULE nixxi.cpp
    LINE 2898
    DETAIL NiPConnect: 165.156.101.209:3315
    SYSTEM CALL connect
    ERRNO 79 ERRNO TEXT Connection refused
    COUNTER 550
    Thanks
    Matt

    Thanks Rene, I have updated the ticket with the required information. In the mean time I am interested if anyone else had had a similar problem during an upgrade. We did have an initial error with the crtsidusr command ( setting CLASSICUSERCONCEPT + removing some of the SPCAUT) seemed to fix that. At this point the upgrade failed and we had to manually APYSAPKRN, the log shoewed it wanted the NON UC which was odd as we are including the UC in the upgrade.
    Thanks

  • How can I get my blackberry curve 8900 to update to 5.0 and get wifi to work?

    I bought a blackberry curve 8900 around a year ago on an AT&T plan back when data plans werent required, so it just has minutes and texting. because of an issue i had with data before, i have data disabled completely on my account to prevent any mistaken data being used up and charging me. my AT&T contract recently expired so i called them up and got my blackberry unlocked, and will be soon switching to tmobile.
    My problem is that it refuses to update past 4.6 over to 5.0 because of some restriction on it placed by AT&T, and my wifi wont work unless i have data enabled for the same reason. Is there anything i can do? I've tried installing 5.0 from different service providers onto my phone but it never installs properly. 

    Hi and Welcome to the Forums!
    While you can (with just a trick or two) use any carriers OS package for your specific model number, it won't do any good since all 5.0 level OS's require a data plan, regardless of which carrier. So, without that, you can't update to 5.0. Further, it is the data plan that activates BIS -- which is what is used to run the BlackBerry Browser...hence that non-functionality also. Basically, a BB without a data plan is, to many, pretty useless.
    There are other browsers that bypass BIS and will use a generic data plan (assuming you have that)...OperaMini and Bolt come to mind. You might give those a try.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • BB Curve 8900 - randomly stops receiving emails and requires battery pull

    I'm a newb to BB and this forum has helped a lot but my BB Curve 8900 randomly stops receiving emails about every 2 days and requires a battery pull to correct.
    When it stops receiving emails and I go to the browser, it is also unable to connect. I basically lose all connection to data. I can receive calls and sms.
    Turning unit off and on does not help.
    I need to do a battery pull. Then starts working fine right away.
    I'm with Rogers in Canada
    Is there a fix for this? Could I possibly have a bad phone? Battery pull once is a while is fine but to need to do that every 2 days is not.

    Something similar happens to me.  I have to keep resending the service books and then it works fine, try this, at least it will stop you keep doing a hard reset.  I have read somewhere else that this can be influenced by having your phone to turn off at night etc.  So for now I have turned this feature off.  I can actually receive emails via wifi and the failure is only on GPRS.  It sounds a bit strange but I am also becoming convinced that it only occurs when I leave home, go somewhere else and then come back.
    Read this below.  I did do all this but it hasnt worked for me, may help you though
    http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=23433&query.id=178268...
    Message Edited by davock on 03-01-2009 10:06 AM

  • Curve 8900 won't view surveilence cameras correctly

    Hi!
    I am a locksmith with Carl's Lock Shop in Co. Spgs, CO.
    We view a particular web site with our shop cameras in order to sell our services...
    The web site is www.videoalert.net
    You will automatically be re-directed to thier mobile site...
    should say "mobile access" or "mobile viewer" at the top...
    Enter user name ppp and password pp then click next...
    Choose either rover1 camera or pan and tilt (camera 2 is is disabled)...
    Now the image, if you have any other Black Berry other than a Curve 8900, will update every few seconds with still pics...(no Blank screen between pics)
    If your un-fortunate enough to have been suckered into buying a Curve 8900 you will get one image for about five seconds then instead of refreshing it just goes to blank screen...(if it does refresh it will just blink a half secord glimpse of the pic every thirty seconds or so)
    T-Mobile Black Berry/ PDA  support is no help at all...(have tried every setting in the phone and some settings only an **bleep** would attempt)
    Have been connected with Black Berry support to no avail also...(if 877-255-2377 case # 7151298 was a legit deal( they seemed kinda dumb)
    If you let the screen saver come on it will bring up a permanent pic that will not refresh...(Same thing as turning off java script in browser config)
    It's painfully obvious to even a moron like myself that this new Black Berry has a different Java scpript or operating system  that is not compatible with this particular 3rd party web site, that neither T-Mobile nor Black Berry are responsible for...Duh
    I don't need them to tell me that...
    I figured that out before I called them and spent hours trying to fix the un-fixable...
    Dumb as I am, I know when I have bought a "Pig-In-A-Poke".
    Oh Yeah the Streaming video on this piece of junk skips and locks up unless your on Wi-Fi so don't believe the "Hype" about how good it plays...
    "IF" anybody has any ideas on what will fix this thing...
    Call me direct at (phone number edited out for privacy)
    Thnx,
    Stang
    problem not solved...
    cliked solve button inadvertantly...
    Message Edited by Stanghurd on 06-22-2009 04:21 PM
    Message Edited by Jonathan_K on 06-23-2009 01:42 PM
    Stang

    Hi and Welcome to the Forums!
    This area of the forums is for Welcomes and Introductions only...no device support here. Your post will shortly be moved to the proper place so that the right experts can see it and provide assistance:
    http://supportforums.blackberry.com/rim/board?board.id=8900
    Good luck!
    Message Edited by sdgardne on 06-22-2009 12:40 PM
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Serious Problem with Curve 8900

    Hello.
    A have a Curve 8900 phone which was on the contract with T-Mobile a while back.
    I bought it like new. It was used a bit, but never dropped or anything so hardware is perfectly fine and it did work while it was with the previous owner on the contract.
    Contract was over and the man sold the phone to me. I unlocked it for usage with any network using the code I found for it and now the phone shows that it is unlocked and sees any network just fine.
    Thing is that though the phone shows that everything is ok - I am UNABLE to make any calls, receive any calls (online works through my home Wi-Fi connection and Bluetooth connectivity is fine.)
    Phone shows that it is CONNECTED TO network. (Tried even the original T-Mobile card) But no calls could be made or received. SMS cannot be received or sent as well.
    I tried many things up to rewriting the firmware, wiping out - nothing helps. I have the tools needed to rewrite the firmware and system but I need to know where to look...
    I need your help badly (just please do not write answers like replug the battery) - I am no novice in the field of phone repairs and unlocking but it is a first time I encountered something I'm even clueless what to do and what could be the cause. And yes - I do not have experience with BlackBerry in particular (just before you ask)
    Please help.
    Best Regards
    Jack

    Sounds like your phone is BLOCKED. The likely cause is the person who sold it to you reported it lost or stolen after you bought it. 
    Many phones will show as having a signal even when blocked although you cannot make calls as in your case.
    Sorry mate. Take your phone back to the person you bought it off.

  • No audio during calls

    iphone 4 just replaced because it would not charge and now i have no audio during calls all other sound works fine was doing the same on ios 5(what the phone came with)

    just did hard restart still no fix

  • Installation of Applications on BB Curve 8900

    I am facing so much problem in installing themes on my black berry curve curve 8900. I downloaded the v4.6 Desktop Application software and installed it on my computer as my BB is having v4.6 OS Software. Then I downloaded themes from the web with both .alx and .cod files. I mean the download to my knowledge was complete. then i saw the installation process through application loader of my Desktop application software. Now the problem is that those themes are stored on my PC and when I browse the .alx file even, it gives me a message that " There are no new applications available for my device". I cant understand this problem. Can anybody help me plzzzzzzzzzzzzzzz.

    Lauren,
    It sounds like what I have seen multiple times on a device with moisture damage.
    I hope by only putting yours in rice overnight that you'll be ok.
    Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out.
    It really is more common than you think.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    3. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    *Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • ZTE Open C crashes during calls

    Everything is in the title, my phone reboots sometimes automatically during some calls.

    Hi HoplaMouais,
    I'm sorry to hear you are having issues with your ZTE Open C device restarting.
    This issue has also been reported by other users, and our technical account managers have been made aware of this problem, so that they can communicate it to ZTE:
    * [https://support.mozilla.org/pt-BR/questions/1003430 Forum Thread - ZTE Crashes during calls]
    * [https://bugzilla.mozilla.org/show_bug.cgi?id=1017604 bug 1017604]
    You may also contact ZTE, the maker of your device, for more information.
    - Ralph

  • Curve 8900 Sync Failure

    My new Curve 8900 will sometimes 'connect' to my PC via USB cable to the BB Desktop Manager and sometimes it won't.   If connected and I take a call I pull the cable from the device but when I re-connect it shows "Disconnected" on the Desktop Manager.
    What am I doing wrong - or why will it not re-connect?  Any help gratefully appreciated.

    Hi and welcome to the forums!
    When you use desktop manager notice that rimdevmger and BBdevmgr come up as processes.
    On my XP driven PC they come up in the system tray. They sometimes remain after desktop
    manager is closed and have to be shutdown manually.
    Unless you are using the USB to charge the device, you should have the BB disconnected
    from the USB cable.
    I purchased a charging cradle and have found it extremely easy to charge the device,
    and not have to constantly utilize the USB port.
    Thanks,
    Bifocals
    Example of the cradle:
    http://www.amazon.com/Blackberry-Javelin-Desktop-Charging-ASY-14396-007/dp/B001NQ7UKI
    Message Edited by Bifocals on 02-04-2009 12:49 AM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Maybe you are looking for

  • Is anyone else still having there iMessages fail to send on iPhone 4?

    Ever since the iOS 7 started I've had nothing but problems with my iMessage.  I have to sign out of iMessage restart my phone and then sign back in. Even then it only works for a few hours, and then I start the whole process over again. My software i

  • How to get status of windows services

    Hi , can i use java to get the status of services running under windows (the services that we get on running "services.msc" in run). i want to monitor the status of a service. Thanks.

  • Org Plan - change management

    Hi, Anybody here with practical experience regarding transporting changes to org plan from a test to a productive client? What changes can be distributed/transported, what is the tool (ALE or report), what are the restrictions? - org units, EBP users

  • Error message when trying to change password...

    I get the following error when I try to change the router password in the main splash window(left panel)... Error code: 82BD0302 Error description: An HNAP call to the device was rejected due to incorrect authentication credentials. Model name: unkno

  • How to start Designer from Linux

    I have 902 iDS (not full installation) installed in /home/Oracle. And I have 9.2 Oracle server in another Linux host. What should I add in my .bashrc to my classpath and ld_library_path env variable to run iDS? My /usr/bin/java is 1.4 version. I don'