Curve 9230 907 COD Error when downloadin​g missing default ringtones

So....
Blackberry Curve 9230 via Enterprise server. When the blackberry devices are security wiped, it removes the default ringtones from the phone. Even rebuilding the phone from the BES doesnt put them back on. From the device itself, I have been onto the the KB35182 article, downloaded the .jad file and tried to install, however am getting the 907 Missing COD error message, which is doing my head in.
Any ideas?
Thanks

Anyone?

Similar Messages

  • Event Code Error when switching networks

    Although I am running a standalone version of P6 on my laptop, I continually receive event code errors when I switch between two networks.  This often happens when I need to switch from a client network to my mobile hotspot.  Or, if I'm away from laptop for any length of time and it 'goes to sleep' without having closed out of P6, when I return I will have an event code error that requires me to close and then restart P6.
    I'm running Windows 7 SP1, Firefox 24.0, P6 Release 7.0.0 (Build 00000092)
    Any help is greatly appreciated.

    Hi,
    In regards to the problem when the computer goes to sleep, if you look in the event viewer you will see that Windows is dropping the network connection - not sure of any other workaround to this than disabling the sleep/hibernate function.
    As for the problem when you switch between networks, other than making sure you log out before making the network switch the only thing I can think of would be to try and make sure the connection is using 'localhost' or possibly '127.0.0.1' instead - this is in the vague hope that these connections will hold true even when the network behind the scenes is changing (this also assumes SQL Server, changing this for an Oracle XE database would be a bit different)
    Good luck.
    Regards
    Alex

  • HT2433 What is a -2012 code error when I try to redeem an I-tunes gift card?

    What is a -2012 code error when I try to redeem an I-tunes gift card?

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • I get this error when trying to create a ringtone - iTunes could not connec

    I get this error when trying to create a ringtone:
    "iTunes could not connect to the iTunes Store - an unknown error occurred (11556)"
    But I CAN connect - if I click on the iTunes Store, it connects right away.
    I want to make a ringtone from a song that I purchased, but all I get is the same error message.
    iTunes 9.2.2, Ireland iTunes Store.

    have you seen this KB article: http://support.apple.com/kb/HT1398 ?
    JGG

  • Activity log for bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found) did anyone find a fix for this? Thanks, Edie

    bug 278860: confusing "profile in use"/"already running" error when profile is missing (not found)
    Apparently the profile .default is missing. Therefore the bug 278860 is activated and I can't start Firefox. Is there a solution?

    I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

  • Invalid Account Code error when posting AP Credit Note

    Dear Experts,
    I hit this error message when posting an AP Credit Note based entirely on an existing AP Invoice (nothing was changed in the credit note).
    Invalid Account Code [Message 173-9]
    I have found 2 notes, but I dont think they're relevant
    [Note 1311905|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001311905]
    [Note 1286288|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001286288]
    Please help!
    Warmest Regards,
    Chinho

    Dear All,
    I found the solution!
    In my AP Invoice, there was a Rounding amount, but when I copied over to AP Credit Note, the system unusually set the Rounding amount as $0.00 and copies the Rounding amount to the Discount field instead.
    **The "Invalid Account Code" error happened because I did not set GL account determination for discounts scenario.
    So what I did was I cleared the Discount field in the Credit Note, and enter the rounding figure into the Rounding field again. Then, the AP Credit Note was able to go in Successfully!
    Thanks guys.
    Warmest Regards,
    Chinho

  • Getting mandatory attribute validation error when the value is defaulted through customization

    Hi
    I am getting Mandatory attribute validation error when we default the value through customization.
    In the UI we have attribute called Last Name which is mandatory at EO level. Customer wanted to default Last name to some value, through page composer it is defaulted to some text and saved.
    When ever we open the page the the same value is defaulted as Last Name and appearing in the UI. But when we submit the page, EO level validation is failing. hence we are getting last name is missing.
    When i debug the code last name attribute value for EO is blank.
    In the UI the attribute last name is associated with bindings  --> #{bindings.lastname.inputvalue}
    The validation is failing if we remove the default binding associated with inputtext box.
    Can some body help what can be reason and is there any solution?
    Thanks,
    Praveen

    version 12.1.2
    I am struggling with same situation, I can't set the default value at business component because, the default value comes from a REST service at run time. In page A,  I have a field F1 that contains value from REST service. Page B has a database bound field F2, whose default value should come from F1 in Page A when a user navigates from Page A to Page B. If I set the value of F2 to be the value of F1, then it displays the value in the UI, but nothing gets submitted to EO and fails at commit.
    To make things difficult, here is my situation: Page A lives in bounded taskflow TF1, and Page B lives in bounded taskflow TF2. So I have created an input parameter P1 in TF 2, which carries over the value of F1 in Page A to Page B. When I am in Page B, I can successfully see the value of the taskflow input parameter P1. So, how do I  programmatically set the value of field F2 with the value of input parameter P1?
    I tried setting the F2.inputValue  in a method call M1 in  taskflow TF2 prior to Page B, but I get null pointer exception as it can't see field F2 yet.
    It seems like a simple thing to do, but I have spent a lot of time trying to make it work without any success.
    I would greatly appreciate any guidance.

  • Why do I get the 'PowerPC code' error when trying to launch an Intel-based app from a CD?

    When trying to launch a Flash-based app from a CD on my Mac Book Pro, I get the "PowerPC apps are no longer supported" error. Yet the app is not built with PowerPC code.
    This also happened with Microsoft Office programs soon after I upgraded to OSX Lion, but someone was able to solve that for me.

    It's just a free disc from a photo magazine, but the app runs fine on a Mac Pro running 10.7.3. Could it be hardware related?
    I have actually asked this on behalf of a reader (I work for the company that makes the magazine) who is experiencing this problem, I just can't find any reason why the error would display in these circumstances. I apologise if this is against the community's usual practise - I just want to sort this guy out!
    The app on the disc is compiled using MDM Zinc, but like I said it runs a-OK on Lion everywhere else.
    Any help would be gratefully received and appreciated!

  • Flash Catalyst 5--Artboard Error and Code Error When Publishing

    I am trying to create an interactive document in FC (imported from Illustrator) for the first time, but I am having two big problems.
    1. When I run my project, quite a big portion of my outside edges are "cropped" off, and I can't see them in the browser.
    2. When I try to publish my project, the first few times it worked fine, and the image wasn't cropped, but the buttons I added didn't work. Now when I try to publish my project, I am getting an error message, saying there is an error in the code. This is really confusing, considering I published the same exact document a few days earlier, and now all of a sudden it wont work. I have since tried publishing different documents, and the same message occurs. All my artwork is rasterized in Illustrator, and my Illustrator file is 3.3 MB.
    Can someone please help?
    Thanks so much!

    Hi Anand,
    I understand that you are getting maximum return Code:0152 -tp when you try to import into produciton using CHARM. However, the mentioned return code states that the possible issue is with the Transport tool and route.
    I suggest you to check by importing the tp req. using STMS.
    Please use the following link to find more info on this.
    http://help.sap.com/saphelp_nw04/helpdata/en/7e/c6c2ad98a711d2b429006094b9ea64/content.htm
    You can find the information about the same return code in the above link.
    I hope this is helpful.
    Regards,
    Satish.

  • No code error when trying to download apps: "Download Error"

    I'm not getting an error code, but I am getting a message in Apps that says "Download Error." This is what is in my log: 2/7/15 9:59:25.937 AM Console[1104]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable Any suggestions?

    Johnm13856418 for information on how to resolve download errors please see Error downloading and installing Creative Cloud application.

  • Post code error when installing apps (4s)

    Hi, I have a new 4s and I cant install appls because it always says "wrong post code" even though I have entered the right one. Any ideas how to fix this? Thanks

    I would suggest you try and update to the latest Ovi Store, now called Nokia Store.
    With your phone's browser go to the following address:
    http://lr.ovi.mobi/store/new-symbian-3
    you should then get the option to install the latest Nokia Store client, and this should include new QT files. Corrupt QT files are usually the problem when installations from the Nokia/Ovi Store fails.

  • WWC-51004 error when accessing the portal default page

    An unexpected error occurred: User-Defined Exception (WWC-51004)
    The specified user does not exist. (WWC-41406)
    Unexpected error encountered in wwsec_api.id_sso (User-Defined Exception) (WWC-41417)
    The system failed to retrieve the necessary HTTP request to the Login Server to validate this user. (WWC-41447)

    Dear Carlos,
    we are facing the same problem, how did you solve?
    Best Regards,
    Enrico
    Edited by: venuto on 14-dic-2010 11.39

  • HT5113 "Invalid code error" and "can't connect to the iTunes Store." Any suggestions?

    I keep getting an "invalid code error" when trying to preview a course with the enroll code. When I click on the link to the course, I get an error that says "can't connect to the iTunes Store." Any suggestions?
    I tried previewing a test course I made about a year ago. I was able to request access to the course, went into Course Manager and approved it, but hours later it still says awaiting approval on my iPad.
    Any ideas as to what could be going on, aside from a cruel April Fool's joke?
    Thanks.
    David

    How about trying to sign out of your account on the iPad, restart the iPad, sign back into the account and then try again?
    Settings>Store>Apple ID - tap on your ID and sign out - restart - go back - sign in.
    Other than going through the support article - if you haven't already done so - the only other thing I can think of is to reset/reboot the iPad. That can clear the memory and it does help solve a lot of "hinky" issues.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • How to know the code error diagnostic hardware (AHT) ?

    I want konw
    How to know the code error when do it Apple Hardware Test.
    Anybody have note the code error (AHT)
    Thank you

    Does this help: http://reviews.cnet.com/8301-13727_7-57352461-263/how-to-invoke-and-interpret-th e-apple-hardware-tests/ ?

  • Invalid Account Code Error In Prod. Receipt

    Hi,
    While making production receipt system throws the error like " Invalid Account Code Message [173-9]". We've checked thoroughly G/L account determination(G/L mapping). This is happening for only one item, remaining items are ok. What is the reason, if any one knows please explain.
    Thanks in advance,
    S.Suresh.

    Hi Suresh,
    Have you checked those threads already?
    Invalid Account Code (Message 173-9)
    Invalid Account Code error when posting AP Credit Note
    Thanks,
    Gordon

Maybe you are looking for

  • Cursor position on screen data in module pool programming(urgent)

    Hi all, I developed a module pool  program which will save the data after  scanning the barcode data. In my program screen 100 is there which contains field  ‘2dbar’. scanned data is comming to 2dbar field. we r doing scan 4 times.once for vendor num

  • Question for sending a PDF Form with desktop mail

    Dear all, I try to create a PDF form and use it for a Workflow. Therefore I created some "Send" Buttons and put into the Properties/Actions/Submit a Form the comand "mailto: [email protected]". The second "Send" Button contains another mail adress wh

  • How do you add a printer to Print_print_printer option?

    I cannot print to paper from Firefox. I have a MacBook Pro. I have done the about:config / print.print_printer, and it says "user set" type "string". I can print from Word and Safari, but not from Firefox. I have looked everywhere for an answer and c

  • Hyperion - best practice architecture

    we are planning to use the hyperion 11x (HFM and Planning and Financial Reports) and would like to know the best practice architecture and the oracle doucment id on this. any help would be much appreciated Thanks

  • New MacBook Pro...Freezing....

    Bought a new 13" MacBook Pro about a month ago.  About a week ago, I have to do a hard reboot as the MacBook "freezes".  I put "freezes" in quotes because I can move the beachball...I just can't do anything on the computer.  The only thing that I've