Curve 9300 3G will not switch on please HELP!!!!!

Had my bb curve 3g for just a few months now love it or at least loved it till it broke on me. It was working fine and one day just went to a blank white screen so i did a battery pull still white screen. It was a gift so cant just send back to shop for repairs or replacment. After a couple of days of white screen i noticed it was off so i went to charge it but the red light did not come on and the phone would not turn on either. Can anybody please help me.
If it helps at all im on O2uk and os 5 thanks in advance.

Hi,
1. Remove battery for 10 min, then switch on device.
2. Connect to start charge and wait for 50-60 min. If battery fully drained it must charge for minimum amount then device is switch on.
3. If you still have white screen it' mean that OS in your device damaged and must be reloaded
4. Here step-by-step instruction how to reload OS with separate way (if one way have trouble, try another)
5. Also there are possibility hardware problem, which mean than must be repaired
Be sure to click Likes! for those who have helped you.
If your query is resolved then please click on “Accept as Solution”.

Similar Messages

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

My purchased music will not play on any of my devices. It is there but it will not play. Please help.

My purchased music will not play on any of my devices. It is there but it will not play. Please help.

Try deleting and redownloading the music.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I need to create a second back-up of iPhoto from Time Machine to a separate external drive. The old iPhoto in TM will not open. Please help!

I need to create a second back-up of iPhoto from Time Machine to a separate external drive. The old iPhoto in TM will not open. Please help! And thank you!

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help

So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help

You can force quit by holding the power button down for extended period.
During boot up hold down the Option key and choose your Macintosh HD OSX.
In >System Preferences> Startup Disk>choose your internal OSX System as Default.

I was able to get the program to install last weekend but I had to do a refresh on my computer and THe program will not install. Please help

I was able to get the program to install last weekend but I had to do a refresh on my computer and THe program will not install. Please help

Please read, and reply here with more information https://forums.adobe.com/thread/1499014

I have the old I phone 4 when I try to access my I tunes store it will not load Someone please help and yes I have the latest update

I have the old I Phone 4. When I try to access my I Tunes Store from the phone it will not load. Please Help

Hello there, morganbailey02.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

Satellite L505 will not start! Please help me!

My Tobisha Satellite is having a problem booting up. I am using the Satellite L505.
Whenever I try to turn on my computer the boot logo comes up, but then after that a black screen comes up with a symbol up at the top left. It stays on that screen forever, please help me!!!!

Try what drev9 said.    And you can also try repeat tries to get it to boot (hold the power button in ntil it shuts off, then power it back on again. I once got my L505D to successfully boot but it took 3-4 tries like that.) Or you can try walking off and just leaving it stwe a while to see if Windows resolves the issue.   If it prompts you that Windows didn't start right, you can either try start normally or do a restore back to last restore point or whatever that other option is.    If you get the macine running, definitely back up or copy off all of your important data and pictures, before you shut it off again.
Probably what you're going to need to do is a complete Toshiba Restore that reinstalls all software back to factory configuration, and that will erase everything on the hard disk.   It's remarkably easi to do, provided you have a fast and reliable Internet connection to get all the updates installed.
I have an L505D-s6947 and it was purchased in July 2009.     It recently started having problems with starting up Windows, could not complete burning a DVD, lost some files, corrupted my original Admin account, and occasionally the hard disk was "not available" when file writes were supposed to happen.    Doing a full Restore cleans out all the junk, it fixed my problems, and the machine runs reliable and much faster now, plus has no difficulty burning DVDS.   These computers probably should get wiped and reinstalled once a year, to keep the performance up and Windows running smoothly.

Please help! Itunes fails to open on my macbook pro. I have remove itunes and reinstalled it and it still will not work!, Please help! Itunes fails to open on my macbook pro. I have remove itunes and reinstalled it and it still will not work!

Please help! Itunes fails to open on my macbook pro. I have removed itunes and reinstalled it and it still will not work!

Try removing the Genius database. In the "Finder" go to the /username/Music/iTunes/ folder and delete the "iTunes Library Genius.itdb" file. This may allow the program to launch again. This file will be recreated upon first use of the "Genius" feature.

My ipod touch will not charge! Please help!

my ipod will not respond no matter where i charge it. i charged it using my computer and it hasn't been responding. For some reason, it says it has low battery, and now its dead but it just will not charge! i have not idea what is going on and this is very unusual. please help me!!!!

Have you tried another docking cable?
How about the Apple USB charger: Apple USB Power Adapter?
Here is some Apple information on charging the iPod Touch: iPhone and iPod touch: Charging the battery

Itunes will not load, someone please help!?

i have read all the forums, and nothing is working for the technical help that I need, itunes will not load or work and no matter what help I am trying to seek, nothing is working. I have tried uninstalling, reinstalling, everything that people are advising but nothing seems to work. Basically each time I try to click on itunes to load, the timer appears but nothing else. I have just replaced my iphone and I cant get it to sync with my itunes so basically i cant use my phone either, please help anyone?! thanks, terri!

I believe the files need to be in MPEG-4 format. Or that is what I am converting my movies in and it works fine.
Movies you download off of iTunes are in M4V format, which is probably Apples MPEG-4 format name.

3 beeps after ram upgrade, computer will not turn on, please help! I have tried everything.

I have a late 2011 Macbook Pro 15 inches, i recently upgraded the RAM from Crucial 8gb (4gbx2) to Crucial 16gb (8gbx2). I have done thies before, was er careful, and had antistatic clip, clean work surface, etc. When trying to turn the computer on again, i hear 3 slow beeps, repeated three different times, and the computer does not turn on. I have been looking around for solutions.
I have already swapped the memory modules, cleaned them, dusted the whole computer with air can, put the old ram in and still have the 3 beep problem. It no longer works even with the old ram. The computer was working perfectly fine before this.
Am i missin a step? I saw in a video on youtube that i have to reset the RAM with Alt+P+R+Power button, but nothing happens.
Please help, i am self employed and my Mac Book Pro is the computer i work with!
I have Lion operating system, everything updated very recently. Stock 512 gb hard drive.

Thanks for the quick reply Allan, i have reseated the ram 4 times, swapping top and bottom Ram modules, and pushing them in firmly and pressing down evenly with both hands.
I tried to put the old ram in as well in case the New RAM was bad, and that did not work anymore either. I am from Mexico and live in Mexico City, and it is not easy to send the RAM back and get an exchange. I will go to a MAC repair center on monday, but think i am missing some simple step somewhere. As i said this is my work computer and i really need it!
I have reread what i wrote before, to clarify my computer was working fine with the old 8 gigs of ram, i just wanted it to be faster, and bought 16 gb since they are now much cheaper than a few years ago.

Help! Computer turns on but then will not boot up - Please Help!

I have no idea what happened to my Apple. Someone please help me. My powerbook currently is running on no battery (recall victim) and now the entire computer is no longer functioning at all. I installed iTunes 7.0 and then the trouble began. I had to restart the computer, so I did that and then the computer just wont boot up. It goes to the grey screen which shows the Apple symbol and occurs right before my log in then just continues to read. The green light for the battery is function and nothing at all is working. The computer simply will not boot up, I have tried unplugging it for the night and then rebooting it and nothing. Please someone help, what has went wrong?

You mentioned in your other thread that you had trouble with a cpu(0) hardware error trying to use the hardware test disk. Is this the hardware test disk which came with that particular machine? If not, then you need to find the original hardware test disk that came with that machine. If the restore disks that say 12" Powerbook include the words hardware test, use those instead and follow these directions:
http://docs.info.apple.com/article.html?artnum=86287
If you are using the correct hardware test disk and you get a cpu(0) error using it, then the machine has a hardware problem.

DVD studio pro will not burn menus PLEASE HELP!!!!!!!!!!!!!!

PLEASE HELP!!!
I have created a project, a DVD with menus and subtitles in 2 languages, yet when I burn the DVD (both using build/format option and build format options separately)the resulting DVD has no main menu, actually it has no menus at all! it goes straight into the DVD film where I can change subtitles language only from the remote buttons. The project compiles successfully but once formatting it gives me two hilghlighted errors in the log (which I gather are the layouts/menus)HERE IS THE LOG (highlighted part is error message):
Building Project Treesitting DVD with sub+menu
17/12/2007 14:12:01
Build Folder /Users/adelitahusni-bey/Library/Caches/DVD Studio Pro Files/HVDVDTS/HVDVDTS/nomad/treesit dvd
Starting DVD Build TREESITTINGDVD_WITHSUB...
Compiler Initializing...
Precompiling Project TREESITTINGDVD_WITHSUB
Compiling VMG Information...
Created 15 PGCs in VTSM1
Created 8 PGCs in VMG.
2 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Skipped Rendering Menu:Menu 1,Language:1.
Compiling Menu#2 (Menu 2)...
Skipped Rendering Menu:Menu 2,Language:1.
Writing HV000M02.EVO
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Preparing Subtitles...
Muxing HV001T01.EVO
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
+*Warning: The file ‘TREESITTINGDVD_WITHSUB.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
+*Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing UDF 2.50 structures
Writing files
Writing final UDF information
Formatting finished.
Formatting finished.
DOES ANYONE PLEASE KNOW THE REASON FOR THIS???? AND HOW TO SOLVE IT???? PLEASE PLEASE PLEASE...HAVE TO SEND THIS PROJECT OFF SOON.
I have burned another project with menus succesfully..

Hi
FIRST check that your Play Movie button in your menu has NOT an Auto Action selected that make it plays automatically your movie when the Menu loads. You'll find that setting in the Advanced tab of Inspector. If not . . .
You can try a workaround, no matter that if you have your Menu as First Play it must work. Try yhis:
- Create a simple black JPG file i.e. in Photoshop
- Create a Slideshow
- Add a the JPG to the slideshow, set duration 2 secs
- Set the Slideshow as First Play
- Set Slideshow End Jump to your Main Menu
Build and burn again.
Alberto

Finder Icon will not change! Please help!

I have been customizing the look of of my dockbar on my imac by giving all of my apps new ios 7 style icons.
Yesterday I changed my Finder icon with no problem at all by going to:
System→Library→Core Services→(right click 'Dock'→Show Package Contents)→Contents→Resources.
And replacing the two png files (finder.png) and ([email protected]) with my new images. Yesterday I did this all perfectly fine and it changed to my new icon.
However today I found a better finder icon and decided to change it again to this new version. However what ever I try it will not change to this new icon.
I have followed the exact same steps as before, I have replaced my two png files from yesterday with my new ones and I have checked and re-checked that I am naming the files correctly, and that they are the right format etc.
I have even deleted my original icons that I changed it to yesterday and emptied them from the trash but it is still there even after restarting and shutting down and rebooting.
I have also tried going to terminal and typing 'killall Dock', it still returns with the same icon that I changed it to yesterday, even though I have deleted them from my hard drive.
Please help me this is so frustrating and have wasted many many hours on this.
(I am on mavericks btw)

(I am on mavericks btw)
iMac, OS X Mountain Lion (10.8.4)
Then, update your profile/product info. BTW, I have nothing for the icon problem.

Curve 9300 3G will not switch on please HELP!!!!!

Similar Messages

Maybe you are looking for