Curve 9300 wont turn on fully

Was wondering if anyone could give me a hand? Ive tried to restart my phone by taking the battery out, multiple times for the past few hours, my phone begins to load but it only loads up to three quarters of the way up the bar and freezes every time I have waited for 3 hours for it to turn on properly and it still hasnt, can anyone help me fix it?

Hi zoe_leanne,
Welcome to the Support Community!
Since your BlackBerry® Curve™ 9300 smartphone is unable to power on fully,  please follow the steps in one of the following KB articles to reload the software to resolve this issue.
For Windows® : "How to force the detection of the BlackBerry smartphone using Application Loader" http://bbry.lv/IAfXWd
For Mac: "Unable to application load a BlackBerry smartphone showing JVM 507 or JVM 513 using BlackBerry Desktop Software" http://bbry.lv/J0V8BH
Please note that this process will remove all data from your BlackBerry® smartphone. If you have a previously taken backup file, you should be able to restore your data from that backup.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • My BlackBerry Curve 8520 Wont Turn on With No LED

    My Blackberry Curve 8520 Wont turn on and there is no LED flashing, i have tried pretty much everything and nothing seems to be working, tried a new battery, tried using the USB and the mains charger, tried leaving to charge for 8 hours, is there anyhing i can do to fix it myself as i dont have themoney to replace the phone or pay for a repair
    PLEASE HELP ME
    Thank You 
    Nathan

    Hey hakmilton,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    I would suggest contacting your network service provider to look at possible repair and exchange options.  Since you tried a new battery and the LED won't come on, we can not even try reloading the device software.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Blackberry 9300 wont turn on

    Hello everybody,
    This afternoon i was using my BB curve 9300 in the sun and it got really hot.(I dont think this is the problem though because of what i'm going to say next)After that it cooled off and i used it for a really long time after that. I  realized that my phone battery was very low, so i decided to charge it. Now, i'm not sure if this happened before or after i plugged it in because it was spontaneous;when i was going to plug it in the LED light went red and it died but right before it still had a good 30 minutes left of battery. I left it charging because i had'nt noticed it died and when i came back it didnt turn on. After that i looked up a solution on the internet and the people who seemed to have the same probel said that all they did was that they blew on the 4 golden things on their phone and battery and it worked, I tried it but it didnt work for me. I event tried using a compressed air cleaner and it didnt work. But the people from the internet also said that sometimes their LED would turn red but mine had no sign of life. I tried changing the battery and it didnt work but when i put my battery into a friend's phone it worked for them, so clearly the problem isn't the battery. I am going to send my phone to be fixed sometime soon but for the meantime; if you could please give a suggestion that could help then i will very much appreciate it.
    Kindest regards, Pewis

    That kind of heat can ruin a Lithium Ion battery (it's also not good for the display.) My guess is the battery is toast. Can you get to a store and try another battery?
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • My Blackberry curve 8520 wont turn on or charge

    My blackberry curve 8520 doesnt turn on and when i try to charge it , there is just the red LED light and the screen shows up some picture which shows a red cross on top of a battery. I also tried to connect this to my computer but it doesnt respong and also try with another blackberry original battery it showing same . but when i put my battery to another blackberry phone that phone is turning on properly . please help asap.

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My 9300 wont turn on

    my 9300 only about 4 months old has turned off wen battery died and now wont turn on even tryin a new battery hasnt worked wot cud it be and how cn i fix it?

    Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My Blackberry Curve 9360 wont turn on.

    My phone was fully charged in my pocket, I hadn't looked at my phone for about an hour, I took it out my pocket and it was rebooting itself, which it never normally does. The phone didn't even get halfway and just turned off. After about 2 hours I tried again and it turned as it normally would but as the evening progressed this kept happening. In the end, I left the phone off and waited for the morning. 
    The next morning I go to charge the phone and connect it to the computer but it wont turn on at all. I have left it to charge for about 2 hours and still nothing. 
    I don't know what to do

    Hello Salway1,
    Welcome to the Community
    Please connect your handheld with pc using USB cable and check whether pc detect your handheld or not.
    Further, pull out battery and connect your device with charger without inserting battery & wait for 5 to 10 mins, a NO BATTERY sign will be shown on your handheld. One you find NO BATTERY sign, insert battery without un plugging charger & wait for 5 to 10 mins. Hope for luck..
    Thanks..!!

  • Blackberry curve 8520 wont turn on or wont charge, please somebody help me!:(

    My phone was working fine yesterday until the keypad began to get stuck, so I removed the front off of my blackberry and I arranged the keys so they worked again, when I put my battery back in, the re-boot started, but once the blackberry screen loaded up, my phone shuts itself down, I haven't been able to use my phone all day today and yesterday,when I insert the battery the red LED light stays on for about 5-10 seconds and then it disappears, I left my phone on charge for 4 hours and it still wont turn on, but now even the LED light doesn't come on, I just have a black screen with no LED light whatsoever,  any suggestions?? I can't live without my phone for any longer! ox

    also when i insert the battery now, the blackberry screen doesn't come up, it just stays black

  • Z10 Wont turn on fully after a reset.

    I was wondering if anyone can help me turn my phone on. It froze this morning so i removed the battery. The red light flashed and it came on to the black screen where its only the word Blackverry ( in white) andit wont go further than that? I have removed the battery a number of times, had it on charge, tried to link it to the PC without any luck, and it still wont go further than that first screen. Please help.

    Hey csjp,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Follow the steps in this KB article to bring the BlackBerry Z10 smartphone back to life: www.blackberry.com/btsc/KB34045
    Let me know if you have any more questions.
    Cheers.
    VIA | ViciousFerret
    http://supportforums.blackberry.com/t5/BlackBerry-Z10/z10-black-screen-and-red-blinking-light-plz-he...
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Ipad wont turn on fully

    my ipad will not fully turn on. i turned it off and when i tried to turn it back on the apple logo just blinks. and itunes dose not recognize it. what do i do???

    Did you turn it off with the home button power switch sliding red bar combo? 

  • My curve 8900 wont turn on

    my curve 8900 was dead for about an hour then it on charge and the red light came on then about 15mins latger i look it doenstairs to charge and now its not doing anything., anyhelp please? and yes the plug is on and charger worked as it just charged my bold ...

    Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT201412 ipod touch wont turn on fully

    when i turn my ipod on the apple dims then it freezes then shuts off and ask to charge it but i have it plugged in and it turns on by it self i just update it to the new software and when it restarted the problem started.

    Try here:
    iOS: Not responding or does not turn on

  • BB Curve 8900 Wont Turn on

    My Battery was competely discharged over the weekend and i've had my 8900 plugged in with the USB charger since 10 am  (EST) this morning. The device will still not switch on... ... All i see is the RED LED lit.
    Tried.. removing the battery for a solid 30+ seconds...
    Tried... Holding the On/Off key for long
    any help would be appreciated
    Thanks
    Message Edited by vicknaresh on 01-12-2009 03:54 PM
    Solved!
    Go to Solution.

    Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
    If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
    Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry curve 9300 wont switch on

    i fixed it at a shop bur when i removed my battery again to put sim in i could not switch it back on help please

    Hi xa4,
    Welcome to the Support Community!
    Since your BlackBerry® smartphone is unable to power on, the BlackBerry® Desktop Software will be unable to connect with your BlackBerry® smartphone. I would advise trying to force a connection by starting a BlackBerry® Device Software reload without your battery inserted. For further steps, please see the following KB articles:
    For Windows® : "How to force the detection of the BlackBerry smartphone using Application Loader" http://bbry.lv/IAfXWd
    For Mac: "Unable to application load a BlackBerry smartphone showing JVM 507 or JVM 513 using BlackBerry Desktop Software" http://bbry.lv/J0V8BH
    Please note that this process will remove all data from your BlackBerry® smartphone.
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Email on Curve 9300

    Hi Guys
    Im new to this so please forgive any protocol glitches. My Curve 9300 wont send or receive email to/from my hotmail accounts since I tried to forward an email from hotmail to gmail using the Curve. Any ideas how to resolve this issue?
    Thanks & kind regards

    Hello GardenPartyPaul
    Welcome to BlackBerry Support Forums
    First please try those Steps in a sequence :
    1- Register your Handheld .
    KB00510 : How to register a BlackBerry smartphone with the wireless network
    Wait till a Registration messages comes in your message box.
    2- Resend your Service Book
    KB02830 : Send the service books for the BlackBerry Internet Service
    ( Wait till a Registration Message comes in your message box for each email that you have configured on your device )
    3-  Then perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back
    After Reboot please check if you're able to send any email from your Hotmail account , If problem persists then you can Delete and Re- add your Hotmail account which might help .
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • My 2nd Generation iTouch Wont Turn On, Even While Charged

    My 2nd Generation iTouch repeatedly turns off and displays the apple logo when plugged in, then immediately shuts off moments later. I dont understand why its doing this, only started today after signs of no problems. I cant connect the itouch to itunes because it wont turn on fully, only displays the Apple logo for a moment then shuts off, then restarts it back at the apple logo. Help

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Maybe you are looking for

  • How do i upgrade my iphone 3gs from 3.1.3 to latest firmmware?

    Here is what i've done so far. Downloaded the latest Itunes restarted computer Backed up my iphone downloaded the latest firmware(4.3.5) from ios 3.1.3 pressed update it gets as far as the beginning of the installation and displays an error: "The Iph

  • RPM_PROJ authorization object in PPM5.0

    Hi Folks, I am trying to use the authorization object RPM_PROJ to restrict the user to a category/subcategory. However, it does not seem to work. I have ensure that the user has only the minimum authorizations needed. Is this object obsolete in PPM5.

  • Change mouse cursor over graph cursor.

    Is there a way to change the mouse cursor as it moves over graph cursors when using trackmode TrackDragCursor? To indicate that you can position the cursor.

  • Tutorial on Development Component Project

    Hi, Can somebody send a tutorial on Development Component Project? Is EP (Enterprise Portal) required for using the Development Component Project? Thanks. Regards, Suresh.

  • Fixed Assets instalation on SAP Business One 2007 A PL 47 SQL Server 2008

    Dear Experts, When i try to start the Fixed Assets Addon following Error occured System Message Set-up function of add-onfailed(C:Program Files\SAP\SAP Business One\Add-ons\SAP\Fixed Assets\BA_FixedAssets.exe) I am using SBO 2007A PL 47 & SQL Server