Curve Sync to Outlook - Cannot find table in system file

I have just upgraded from a Pearl to a Curve, loaded the desktop software and tried to sync to my MS Outlook, but it gives an error message "Cannot find table in system file".
I found a thread which pointed to a solution (ID KB15278), but this did not work. The final step in that solution is to uninstall and reinstall the desktop software, and when I try to do that via Control Panel, it won't remove the software. I seem to have both Version 4.2 and 4.7 of the software on my PC.
Anyone got any suggestions?
Solved!
Go to Solution.

the following article from the public knowledge base will certainly be helpful.
http://www.blackberry.com/btsc/KB02206
Perform a clean uninstall of BlackBerry Desktop Software
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

How do i unistall quicktime if i keep getting the installer note of: the feature you are trying to use on a network resource that is unavailable. i cannot find Quick Time.msi file anywhere. so i cannot uninstall or re install quick time

the feature you are trying to use on a network resource that is unavailable. i cannot find Quick Time.msi file anywhere. so i cannot uninstall or re install quick time
any suggestions please??????

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Cannot find BI master system

Hi everyone,
we are developing bex queries in our BI (NW2004s) system. However, when we create an iview in our Enterprise portal containing such queries we always get the following error when trying to run them.
"The initial exception that caused the request to fail, was:
Cannot find BI master system"
We have our BW system configured into EP under System Administration section.
Every connection test is successfull.
On the other hand, if we run the queries from BW ABAP system using the Java Preview they run ok.
So there seems to be something missing in our EP system...
Has anyone faced this before ?
any help would be appreciated.
Thanks in advance.
Ernest.

Hi Elliot
You can edit this setting under the following path:
System Administration -> System Configuration ->
here you browse to find your BW system , double click it and there you'll be able to change the propery value at the right hand side of the screen.. (7th item)
Let me know if this worked for you also.
Regards.

Windows cannot find creative cloud exe file

I inadvertantly deleted the Creative Cloud Desktop App and have tried to reinstall but get the message that Windows cannot find the Program exe file. How can I resolve this issue?

Hi John.mcdowall,
Please try the steps below and check.
Click Start > Control Panel.
Double-click Programs and Features, select Adobe Creative Cloud, and click Uninstall.
Follow the onscreen instructions.
Download cleaner tool from the link below to remove the Creative Cloud Desktop.
http://www.adobe.com/support/contact/cscleanertool.html
Download and install the Creative Cloud Desktop application from the link below.
http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Regards,
Anand

Cannot find RM ORACLE_XA in file d:\tuxedo1\udataobj\RM

when i execute buildtms -o d:\tuxedo1\bin\TMS_ORA8i -r ORACLE_XA
GP_CAT:1102: ERROR: Cannot find RM ORACLE_XA in file d:\tuxedo1\udataobj\RM
CMDTUX_CAT:530: ERROR: Cannot execute %TUXDIR%\bin\buildserver -r ORACLE_XA -o d
:\tuxedo1\bin\TMS_ORA8i -s TMS -f %TUXDIR%\lib\TMS.obj

Hello,
The user need to put these entriesin the RM file. To use a new resource manager
like Oracle, add an extra entry in this file and build a TMS server.
BEA has lot of documentation on what should go inside the RM for each RDBMS.
HTH
rgds
MS
yunerwater <[email protected]> wrote:
when i execute buildtms -o d:\tuxedo1\bin\TMS_ORA8i -r ORACLE_XA
GP_CAT:1102: ERROR: Cannot find RM ORACLE_XA in file d:\tuxedo1\udataobj\RM
CMDTUX_CAT:530: ERROR: Cannot execute %TUXDIR%\bin\buildserver -r ORACLE_XA
-o d
:\tuxedo1\bin\TMS_ORA8i -s TMS -f %TUXDIR%\lib\TMS.obj

How can I sync my photo contents in iPhoto on my iMac to my new iPAD's iPhoto? I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but I cannot find "phone button" under Device name on iTunes page. Please help! Thanks!

I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!

It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side :

Cannot sync photos-says cannot find file, will not sync

eveytime I try to sync, when it gets to photos, iTunes has an error window with no code that says "Cannot find file, cannot sync" Everthing else backs up and syncs except photos. My husband uses the same mac and he can sync just fine, no errors.

For iPhoto the link said:
If you're syncing from an iPhoto or Aperture album, use these steps to find the iPod Photo Cache folder in the default iPhoto Library or Aperture Library location:
From the Finder, choose Home from the Go menu.
Once there, open the Pictures folder and locate the iPhoto Library file. (For Aperture, this is called Aperture Library.) If you have moved your iPhoto Library or Aperture Library to a different location, go to that location in Finder first.
Control-click the iPhoto Library or Aperture Library file and choose Show Package Contents from the shortcut menu.
In the next window, locate the iPod Photo Cache folder and drag it to the Trash. Important: Do not remove or modify any other file within the library package. Removing or modifying other files may cause data loss.
Close the Finder window.
Are you doing step 3? You can also right click and select Show Package Contents. It works both ways for me. I just tried it.

My itunes wont open and i cannot find an itunes .exe file

my itunes wont open and i cannot find an itunes .exe file

I have this same problem and when I go to the control panel to uninstall itunes, I can't do that either. I have been trying to uninstall so I can reinstall. Hopefully someone has an idea.

VM created on Win 8.1 Pro Laptop cannot find win 7 iso file on USB

VM cannot find USB to load Win 7
I have a Windows laptop with Win 8.1 Pro installed. I turned on Hyper-V and created a VM. Everything worked up to that point. I also downloaded the Win 7 iso and placed it on a USB thumb drive. I also downloaded the Win 7 installer.
When I "start" the VM, I get a black screen with a message the VM could not load an OS.
It appears to me that the VM does not know where to look for the OS. I cannot find any way to tell it where to look.
I spent over $300 for upgrades to Win 8.1 Pro and a licensed copy of Win 7 so I could run Win 7 on my laptop as I need it to run UPK (which is not compatible with Win 8).
As a last resort I went to the Micrsoft store in Miami and offered to buy a Surface Pro 3 if they would install the VM and Win 7 on that for me. They said it was very easy to do and I would have no problems, etc., etc., etc. In other words they did not have
a clue about what I was talking about.
I hate to see over $3000 worth of hardware collecting dust on my closet shelf because I cannot use them. I am hopeful someone here can help a non-techie make this thing work.
Thanks in advance,
Dennis
PS - Went to the Apple store last night and was shown a MacBook Air with Parallels installed. It was running Apple stuff on the Apple OS and MS Office 365 on Win 7. It was all very seamless so am leaning very much to going with Apple as a solution.

You don't say that you attached the iso to the VM. The easiest way to do
that is to connect to the VM and then on the console, pull down the
"Media" menu, Select "Insert Disk", then browse to the ISO and select it.
Then under the "Action" menu, select "Reset".
You can also mount an iso in the settings for the VM.
Bob Comer

I have HugesNet Gen4 and have downloaded most current version. I am unable to open and cannot find where in system preferences and/or Safari I give permission. Can a techie tell me where?

Because I downloaded from internet, I am unable to open. I cannot find where I give permission and/or if I need to download some plug in or something. Please help and thanks.

Hello Charlene,
It sounds like you are getting a message that the application you downloaded can't be opened because it's from an unidentified developer.
Gatekeeper is a feature of Mac OS X that by default blocks software from unknown developers, but you can change the functionality to download and install software from developers you trust:
Gatekeeper gives you more control over what you install. You can choose the safest option and only allow apps that come from the Mac App Store to open. There is also the option of only allowing apps that come from the Mac App Store and identified developers. Or you can choose to allow any apps to open, just like previous versions of OS X.
Gatekeeper options are found in Apple menu > System Preferences… > Security & Privacy > General tab under the header "Allow applications downloaded from:"
If you trust the source you are downloading the application from, you can switch the option to "Anywhere" to download the file. Once you finish downloading the file, you can always switch back to one of the other options.
OS X: About Gatekeeper
http://support.apple.com/kb/ht5290
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have Photoshop CC 2014 on my Mac and cannot find Mini-bridge under file, window or in the online add-ons.

Was Mini-Bridge discontinued in Photoshop CC2014? It is not under the file or Window menus. I cannot find it under add-ons on line. I have a Mac, is that why I'm not seeing it? Any help would be very useful.

Aricia93313 wrote:
Was Mini-Bridge discontinued in Photoshop CC2014?
Yes.
See Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG
"Mini Bridge
Mini-Bridge is an Extension Panel using Flash and therefore must be removed now that Flash is no longer supported in Photoshop. Bridge CC remains available as a stand-alone file browser application for designers and photographers needing to browse non-photographic file formats.
Lightroom, which is available with Creative Cloud and the Photoshop Photography Program, is an alternative for photographers as a way to work with multiple photos and hand them off to Photoshop for additional processing."

Cannot find my custom swatch files to share with InDesign

I have created some custom swatch files in Photoshop and would like use them in InDesign as well - but I can't find them! They are always there and available for use in PS, but I cannot find them anywhere on my hard drive. The "Color Swatches" file under "Presets" in PS contains just the swatches that came with the software; I have searched the hard drive for other *.aco files or folders containing such files, but turned up nothing.
Any ideas?
CS4 and Snow Leopard.

I have created some custom swatch files in Photoshop and would like use them in InDesign as well - but I can't find them! They are always there and available for use in PS, but I cannot find them anywhere on my hard drive. The "Color Swatches" file under "Presets" in PS contains just the swatches that came with the software; I have searched the hard drive for other *.aco files or folders containing such files, but turned up nothing.
Any ideas?
CS4 and Snow Leopard.

Cannot find the export excel file in Win7

Dear all:
We use the Discover 4i run the report then export the excel file to the win7 OS, but when export succeed,we cannot find the file. The user has the admin right to this export folder . How can I fix the problem?
my environment is : 11.5.9
Discover: 4i
OS: win7
Regards
Terry
Edited by: Terry Chen on 2010/4/28 下午 8:34

Dear all:
I found the solution:
To modify the access permission of win 7.
Regard
Terry

When creating installer files, there is an error:the system cannot find the customResource2052.dll file, what's the problem?

I am using labview2009, when I create a installer, there is an error report as blow:
Error: Windows SDK function returned an error. (Error code -12)
Error accessing a resource module "E:\工作资料\项目资料\绿盾\builds\Untitled Project 1\...\Volume\supportfiles\customResource2052.dll".
The system cannot find the file specified.
*** Error Details:
Error in MDF API function: _MDFBuildDist_Build
Error in MetaToolbox::UpdateResourceString.
strId: 3; New String: ; LangId: 2052
Windows function LoadLibraryEx returned an error. Error code: 2
*** End Error Report

Hi super008,
The error can be due to some improper installation of a driver or any NI SW that the Installer requires.
Have you recently installed or Uninstalled any NI Software ?
Also -
You can see in the KB below -
That it could also happen due to some incompatibility with the .NET framework or adding exception in the AntiVirus.
SDK Error Code -12 When Building a LabVIEW Installer or Installing LabVIEW
http://digital.ni.com/public.nsf/allkb/AFC375154EFBD6AE8625760B005FB723?OpenDocument
One more question :
Do you have any idea what is this resource :
E:\工作资料\项目资料\绿盾\builds\Untitled Project 1\...\Volume\supportfiles\customResource2052.dll ????
is "Untitled Project 1" your project ?

Curve Sync to Outlook - Cannot find table in system file

Similar Messages

Maybe you are looking for