Curve will not stop rebooting

Hello to all,
I have a Curce 9330. I had trouble with Four Square app. last night. So i deleted the app and reinstalled it. The Phone needed to reset itself. Now all the phone does is start rebootong over and over. Any Ideas. Thanks inadvance to help
sam

Start your BlackBerry in Safe Mode and go to Options > Advanced > Applications and delete the FourSquare app again. Then try to return to normal mode.
Article ID: KB17877 How to start a BlackBerry smartphone in Safe Mode http://www.blackberry.com/btsc/KB17877
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

X200 will not stop rebooting at shut down

I have an X200 that will not shut down when the battery is installed. After hitting shut down, it goes through the normal shut down cycle, but then about 5 seconds later starts back up again. When operated without the main battery in (ie. on the power cord only)…it will shut down normally. Here is what I have tried so far, none of which has helped:
I’ve run multiple diagnostic programs and none have identified an issue with the system or the hard drive
The system originally had XP installed so I did a complete wipe and installed Windows 7, but it did not fix it. I also installed all the available Windows 7 driver updates.
Updated the BIOS, and checked all the bios setting
Replaced the Cmos battery
Replaced the main battery (I am using OEM batteries, tried both a 6 cell and 9 cell)
Turned off the auto reboot setting for when there is a system failure
I did a ton of searches online for this and could not find anything that helped. Thanks in advance for any insight anyone can provide.

Hmm,
See if there are settings for "wake on Lan" functionality in the BIOS. If so, try to disable them. Maybe it is detecting some networking activity and starting up?
This is a really odd one.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

8330 curve will not STOP receiving email

I cannot get the options working correctly on the desktop manager. My blackberry still receives email if it is connected to my computer (and i have the correct box checked in the options). Also, if i shut down the redirector and manger all together, i still get all my emails. I have tried uninstalling and re-installing the blackberry manager, and the problem persists. I would like to be able to not get my email at times, but cannot get it to work correctly. Can anyone offer any help? Thanks in advance.
BTW.... i am using it for work and personal email.

What version OS do you have on the phone. Check under Options | About. Will be listed as v4.x.x.xxx.
Have a look at these links provided by JSanders to see if any help out
http://supportforums.blackberry.com/rim/board/message?board.id=8100&message.id=14135&query.id=142825...
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

I bought a ibook G4 2005 refur-ed it is making a fan running noise when I listen to sample music on line and it will not stop until I reboot.. What could that be also bottom of computer very hot?

I bought a ibook G4 2005 refur-ed it is making a fan running noise when I listen to sample music on line and it will not stop until I reboot.. What could that be also bottom of computer very hot?

When my iBook got hot like that, I would take a break and let it cool down.
You can buy laptop desks that have USB powered fans on them, such as the Targus Chill Mat.

MY PRINTER WILL NOT STOP PRINTING

I have a brand new HP 309a wireless printer. I am using it with a USB PORT. I downloaded something from a PDF file and the printer will not stop printing. I rebooted the computer, I disconnected the printer for an hour and when I turned it on it resumed I hit the cancel button, the display reads "print cancelled" and then it reads "now printing." When I attempt to use the printer to print something else it reads "busy." HELP.
This question was solved.
View Solution.

Hi,
Disconnect the USB cable and follow the below steps to restart the spooler service.
Click Start (Windows logo) >> All Programs >> Accessories >>
Right click on Command Prompt and open it as Administrator ( choose run as administrator)
Enter the below command in black window and hit enter key..
net stop spooler
That will stop the spooler service.
Then enter the below command and hit enter key to start the spooler service
net start spooler
That will delete the current print comment and the things in print queue.
Press the widnows key and R key on the key board to open run window ( Click on Start >> Run).
In run window enter services.msc and click Ok.
That will open services window.
From there double click on the print spooler service.That will open a new window.
Click on Stop button to stop and then click on start button to restart the spooler service.
Make sure that startup type is : Automatic and Service status is : Started
Click on Apply and Ok to close the services window.
If the issue resolved,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Saul
Tech Support Eng.
HP

Rebuilding aMacBook 1.83 GHz Intel Core Duo, hard drive failure so rebuilding system. Aircard will not stop self-assigning IP address. Any ideas how to resolve successfully?

Had hard drive failure on MacBook 1.83 GHz Intel Core Duo, so had to rebuild the OS on new drive. Was on Lion 10.7.5 prior to failure, but had to reinstall Snow Leopard 10.6.3 since that was most recent OS on media I had. After finally getting ethernet connection to router working, was able to get to internet and download / upgrade to 10.6.8. I assume I can probably buy the upgrade to Mountain Lion 10.8 from there.
Problem is this, Airport will not stop self-assigning IP address for my wireless connection, and unless I can get wireless back on this laptop, doesn't make a lot of sense to continue the rebuild and reinstall of all the software that was on it prior to HD failure. Only way to my home network and router is ethernet now. Everything else on my network (Apple MacBook Pro laptops, iPhones, desktops, and non-Apple printers and laptops) is hooking up to router wirelessly fine.
Any ideas how to resolve successfully so that the airport will stop self-assigning and allow the router to assign the IP address?

When see the beachball cursor, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

My ipod touch will not stop playing music

My ipod touch will not stop playing music. I will pause the music, leave the playlist, and after 30-60 seconds, the music starts playing again. I use my ipod when I run and when I drive (hook it up to the stereo). It is very annoying when I stop to take a phone call or listen to directions, turn off my music, and then hardly a minute into my stop, the music starts right back up again.

FUEL1996, not correct. Apple does not allow one app to control another app.
laurathecellist
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Itunes 10 will not stop auto syncing

I have itunes 10 on a mac and a 160 gb ipod classic.
it will not stop auto syncing when I plug in my ipod, even though "do not auto Sync" button is checked as well as checking off "do not open itunes automatically.
It syncs FOREVER. I would love to find a way to stop this from happening. I dread plugging in my ipod to put on new music etc.

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

My data wheel will not stop spinning (i think i am being tapped)

iphone 3GS 3.1.3 16gb white not jailbroken completly stock
ok every time i open up my native phone app the data wheel instantly starts spinning and will not stop. it does stop as soon as i close it.
i thought it might have something to do with google sync so i deleted my mail account but it did not help aat all
PLease help this is driving my crazy

Perhaps it's trying to access your voicemail. Is that working properly? Does the Phone app work?
Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

ITunes will not stop verifying

I have an iPhone4 with the latest iTunes (10.1.0.54) and when I plug my iPhone4 in, it will not stop verifying. I used to have this problem if I canceled a sync. It would verify the phone the next time I plugged it in. I did that this time. I canceled a sync, but now it will not stop verifying to do anything else. I have left it plugged in for 14 hours and it just verifies the entire time. I can do nothing else. It is not set to sync automatically. How do I stop this?

I'm having the same problem, but I've got a MacBook Pro (rather than a PC).
Not only does it continue to 'verify' but it won't even let me force quit (says it's restoring my phone ... but after a number of hours it must be done already).

Whenever I open Firefox a series of sirens start and will not stop. Does not happen in Internert Explorer.

When Firefox is opened a series of sirens starts and will not stop until Firefox is closed.
== This happened ==
Every time Firefox opened
== started when I opened a news story from the Sacramento Bee News Paper on line. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.1)

That is an issue with the "Cool Previews" extension.
See [tiki-view_forum_thread.php?locale=en-US&comments_parentId=678288&forumId=1]

Ever since I upgraded to 4.0, the welcome tab will not stop opening. It's getting rather annoying.

The welcome tab for the new 4.0 will not stop opening every time I open my browser. Each time I open Firefox two tabs open, the welcome page for the new 4.0 and my home page. I updated some time ago and this welcome page is becoming quite annoying. How do I stop it from opening? In the past, it has stopped after the first time I open Firefox following an update.

Thank you for the reply. I have Google set as my homepage, and that's the only homepage listed in the Options box. I tried restoring to default, but when I opened again, the 4.0 page and Google opened again. That leads me to think it might be options, but that article meant absolutely nothing to me.
What I find strange is that when I have one Firefox window open, then open another Firefox window, only the Google page opens, not the "get to know 4.0" page.

Distiller will not stop distilling postscript file

I use Distiller 6.0.2. Lately, when I try to distill a Quark layout into a pdf the distilling process will not stop. The progress bar shows a number that just keeps on climbing up. It seems if I quit the program and then restart it, this will solve the problem and distiller will make a pdf of the postscript. However, I will get the same problem once I try to distill another page. I tried to trashing the Distiller preferences and then restarting the program. This did not do anything.

It's not a specific file and it doesn't matter how big a file is. I am distilling a postscript file. My Mac is running on 10.3.9. I only print from Quark to get postscript files.

Playhead will not stop at the end

When I play my project in FCP the playhead will not stop at the end but will continue for a few seconds. So when I want to share my project I have to make a range so that I don't have a black clip at the end. There's no gap or what so ever on the timeline. How can I solve this? Thanks for your answers.

Unfortunately, the problem is not solved. When I hit the end key the playhead goes to the end. Actually one frame further. Because when I go back one frame, I get the end clip symbol in the corner. But if I just play, the palyhead goes further for a 3 seconds. Then I get the clip symbol "negative edge" on the rightside. See also image. And there is nothing in the timeline.

HT201304 how to disable siri? siri will not stop talking, and is making it impossible to use my iphone 4s.

Siri will not stop talking, virtually making using my phone impossible. Please help me disable siri?

Settings>General>Siri> turn off.

Curve will not stop rebooting

Similar Messages

Maybe you are looking for