Curves Circle Symbol Disappeared in Photoshop - Replaced With Curves Icon. Need help

Today I watched a YouTube video on how to get rid of under eye darkness in Photoshop (I use CC). It worked beautifully! So easy. I opened another photo to do the same thing, left my computer for a couple hours, came back, and the Curves symbol disappeared-the half colored in, half not circle. I needed to click it in order to achieve my earlier results. It was replaced with a Curves icon as shown under the Adjustments. I was desperate for an answer to this mystery - I can't find the right help anywhere. Ugh. Got anything?

did it install ok?
what os?

Similar Messages

I had several tab groups, but the last time I opened Firefox they'd all disappeared, and been replaced with an advert - can I recover my tab groups somehow?

I've set Firefox so it re-opens my old tabs every time I run the program, and also installed Tab Groups. Usually it opens all the tabs in all the groups with no problem, but this time they'd all disappeared and been replaced with a single advert. Is there a way to recover the old tab groups?

It's likely that by the time there is an answer the data to allow recovery will be long gone, but this really make me angry. I have been operating with the same tabs for months now, and by using tab groups... poof, now all gone. I use tabs precisely because digging around to find all these pages is a time consuming task. some I don't use for a week or two, but when I needed them, there they were. '''BIG BLACK MARK''' awarded to Firefox on this one! My trust level of this software, which had been very high just went to below IE, which is really saying something.

I synced my sisters phone with my itunes and now all her contacts have disappeared and been replaced with mine and also photos... she has never done a back-up is there any way we can get all her contacts and pictures back?

I synced my sisters phone with my itunes and now all her contacts have disappeared and been replaced with mine and also photos... she has never done a back-up is there any way we can get all her contacts and pictures back?

Look under iTunes>Preferences>Devices...is there a backup listed for her phone? First thing done when you sync is an iPhone backup. If you have not synced since screwing her phone up, restoring from that backup(if it exists) should restore her content. Do not sync after you restore her phone, eject it. So, first disable auto-sync on that same device pane in iTunes before you proceed. If this doesn't work, is your sister bigger than you? If so, run 'cause her data is gone .

Why have my contacts disappeared and been replaced with some Facebook friend names?

A few days ago, all of my contacts disappeared and were replaced by the names of SOME of my Facebook friends. None of these have any telephone contact information, it's all email addresses associated with those Facebook friends. For instance, my husband's name, emails and phone numbers were all deleted from my contacts - help!

Look under iTunes>Preferences>Devices...is there a backup listed for her phone? First thing done when you sync is an iPhone backup. If you have not synced since screwing her phone up, restoring from that backup(if it exists) should restore her content. Do not sync after you restore her phone, eject it. So, first disable auto-sync on that same device pane in iTunes before you proceed. If this doesn't work, is your sister bigger than you? If so, run 'cause her data is gone .

All of the photos in my text messages have disappeared and been replaced with a question mark image. Where did they go?

I updated my ios two or three weeks ago, but suddenly beginning this morning all of the photos in my text messages have disappeared. They have been replaced with question mark placeholders. I can't access any videos/photos that either I have sent or others have sent to me. I did nothing to instigate this change (no software updates, etc.) and have already tried resetting my phone multiple times.
Thank you!!
-Cait

I have the same condition on my iPhone only. I also have an iPad, a Macbook Air and an iMac that share the same iCloud account. Messages with photos seem to work fine on all devices except my iPhone. All of a sudden all the photos in my iPhone message streams have disappeared and been replace by question mark placeholders. I rebooted all devices, shut down messages, and rebooted, restarted, with no luck. Very bizarre and extremely frustrating. Any suggestions?

Line through a circle symbol, can't find a way around it! Help please!

On start up of my MDD G4 I am getting a no entry symbol, a circle with a line through it.
To give the full background of events, 2 evenings ago the Mac froze up for no reason, at the point I think where the screensaver would’ve activated due to inactivity. There was only mail and firefox running at the time, no videos or anything – this error, or at least the freezing of the Mac (no movement even from the mouse) repeated itself later on that night and yesterday evening as well, although the next evening the Mac wasn’t on long enough for the screensaver to start up. On those occasions the Mac restarted fine. Last night however I got the circle symbol but was able to hold down option key and select my previous drive to start up with, I ran Diskwarrior and it found a few faults with my main larger drive and repaired them and the Mac restarted with the larger drive as it’s startup drive absolutely fine. I put the Mac to sleep last thing at night, however this morning it failed to wake – note that the power lights on the Mac and Apple Monitor were glowing and fading fine as they should.
When I restarted the Mac via the power button on the Mac it started up fine, I had the Mac symbol with the spinning icon (not sure how you describe it!) as normal, however the fans then slowed down as did the hard drive noise and that’s when the circle with the line through symbol appeared.
So far I have tried disconnecting all peripherals from the Mac, resetting the PRAM, resetting the CUDA switch on the motherboard, starting up holding X and starting up from my Diskwarrior CD – unfortunately even the startup using the Diskwarrior CD fails to bring up a desktop of any sort and instead brings up the circle with a line through it.
Can anyone shed anymore light on potential problems or more importantly solutions as I’m tearing my hair out on this one!!
As further info, there are 2 other additional hard drives in my G4, one of which was my main startup drive for around the last year (a 500Gb drive connected via PCI card), which has worked flawlessly until now. I have tried starting up with this drive disconnected but to no avail.
One more piece of information which may help is that if I hold down the option key at startup the Mac does see both OSX system on my original and additional hard drives (and Diskwarrior CD if inserted) – however no matter which one I select it goes no further than the line through a circle symbol.
Many virtual drinks for anyone who can solve this!!!!!!!

One of the Level 4's, the Hatter (I hope he stops by personally) gave me the following insight:
The hatter wrote:
A really badly corrupt directory can prevent booting from any drive or media, because they all look to see what other boot volumes are out there.
With G4/5's the best way to clear corrupt nvram was to boot into Open Firmware and reset nvram and a good idea to do when swapping drives, memory, PCI cards.
Try booting after removing or unplugging the hard drive. May need to pull it and put in FW case to recover anything.
So what could have happened when you crashed is that there was disk damage, probably to the disk directory. If that happened say to a single HD, then according to the Hatter, you won't be able to boot from any drive since there's a kind of checking to see what other drives are boot volumes out. That check could be failing in your case because of the directory corruption.
You have two HDs in your MDD, so either one or both could have suffered directory corruption.
If I understood one of your posts, you disconnected the SATA drive, and still saw problems. If so, perhaps your old HD suffered corruption.
So you might try disconnecting the old drive -- be sure to disconnect the data cable because your Mac will can cause fits if the data cable is connected to an unpowered HD. Then try to boot from the Install CD or even Diskwarrior. I'm pretty sure you can boot from the optical drive even if there aren't any HDs.
If you can boot from CD with no HDs, then we've got it narrowed down to directory corruption. Thereafter, you might see if you attach only the SATA if you can boot to diagnose the just that drive. If you can, that's great because it would mean your backup HD suffered the damage and not your main drive.
As indicated by the Hatter, if you've got damage to the SATA, it may mean your best chance is to connect it externally. That way you can boot, thereafter connect and diagnose.

Why do all of my icons on my desktop get replaced with itunes icons?

Seriously, this is annoying. every time i install itunes, every single program/shortcut on my desktop and start menu is replaced with an itunes icon. please help me?

Hi Guido,
I did the following steps more than 3 times, always getting the same result:
Import a picture of my libary (import resolution set to 4MP)
duplicate the picture layer, and set the top one to invisible
extracting a part of the lower picture using the lasso tool and the refine edge tool
setting the extracted part as a new layer above the old one
(editing contrast or bluring the lower layer, I was not always getting as far, sometimes it already deleted the layers one step above)
The tool selected when the issue occurred was nearly always either the boxed selection or the lasso selection tool. I had 3-5 layers at the moment it occurred. One of them set to invisible the others to full opacity.
Also I noticed, that when selecting or extracting the part of a picture, it takes far longer to load and the application sometimes gets unresponsive during that time (after this, sometimes also the layers disappeared).
Thanks for the quick answer!
Florian

Curve 8530 - Replacement insurance plan issues, need help

I have had a Blackberry Curve contract for 2 years. When I signed on in Jan/09, I took the replacement insurance plan and have been paying $10/month for the “no phone regrets” replacement plan. The phone was replaced with an 8530 under insurance in July/10 because of tracker ball problems.
In November/10 The LCD of the new phone was slightly squeezed by the gear shift lever of our car. The LCD cover was not broken and there was no apparent symptoms for a few days; but eventually a strip of colour appeared on the LCD.
The phone was still fully functional and I resigned myself to living with the blemish for another year until the contract expired.
About 2 months later (Jan/11) the phone began shutting off during conversations. The battery takes a full charge and will do standby a full day without much draw down. I have tested the battery by keeping the LCD light on for a full ½ hour with only 10% battery consumed. But when I get a phone call, the unit shuts off, then automatically restarts and shows “battery to low for radio use”.
I have taken it to the supplier expecting coverage from the ongoing insurance program. However, they do not want to replace the phone because there is “physical damage” - namely the pixel blemish on the LCD.
The phone has never been abused or wet. The supplier claims that the pixel blemish represents physical damage even though the cover is not broken.
Is their position reasonable? Is the phone shutting down because of the pixels blemish; or is there another cause?
Any comments will be much appreciated. Thank you.

Hello,
Given what you describe, my guess is that anything is possible here...but truly diagnosing across an internet-distance is not possible. Only with hands-on could someone perhaps come to a conclusion on the situation.
Regardless, it would be moot -- your insurance provider is 100% in control of determining if this is covered or not. You can dispute this ruling, of course -- but you do that with them. I suggest escalating with them via whatever appeals process they have. From your description, I think you have a good case -- not rock solid, but more along the lines of "it could go either way"...you need to find someone there who will come down your way rather than the ruling so far received. You can appeal to their sense of helping a longstanding good paying customer as well...if that does any good.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blue boxes with question marks, Need help

In safari i am constantly getting blue boxes with question marks in them, replacing images.
These boxes are showing up on tumblr, forums, facebook and other places.
I need help fixing it please.

Thoseboxes mens it can't decipher the format, might try
Perian...
http://perian.org/
Perian enables QuickTime application support for additional media:
          •          File formats: AVI, DIVX, FLV, MKV, GVI, VP6, and VFW
          •          Video types: MS-MPEG4 v1 & v2, DivX, 3ivx, H.264, Sorenson H.263, FLV/Sorenson Spark, FSV1, VP6, H263i, VP3, HuffYUV, FFVHuff, MPEG1 & MPEG2 Video, Fraps, Snow, NuppelVideo, Techsmith Screen Capture, DosBox Capture
          •          Audio types: Windows Media Audio v1 & v2, Flash ADPCM, Xiph Vorbis (in Matroska), and MPEG Layer I & II Audio, True Audio, DTS Coherent Acoustics, Nellymoser ASAO
          •          AVI support for AAC, AC3 Audio, H.264, MPEG4, VBR MP3 and more
          •          Subtitle support for SSA/***, SRT, SAMI
Never heard of those sites though, so no idea what they use.

Photoshop CS5 Video issues. NEED Help ASAP

I created a video using Adobe Photoshop CS5. In Photoshop, the video is crisp and clear. After I export the video into an "MP4 H.26 Best quality 30 or 48 fps 1920x1080 HD" video, part of the video looks clear, but as soon as the movement occurs, the picture becomes pixilated. I've tried everything that I can think of. I have a still picture in the back ground. There is rain coming down from the top, an object moves across the bottom, and another object "floats" in the air (little up and down movement). Before the rain comes down, everything is clear. Even after the rain (I created) comes down, the movement across the bottom is clear (a video loop from videoblocks.com). But after the rain starts to come down, the still background image (I created) begins to look pixilated, and the "floating" object (Icreated) becomes blurry as well. At first I thought it had something to do with the way I had the rain come down...but in Photoshop, the playback is very clear. Does anybody have any idea how i can save this video without it looking this way? I need an answer ASAP, PLEASE.
Thank you!!!!
Mariposa416

I gave the settings I used in exporting the Adobe Photoshop CS5 video. I want to know how I should change my settings. I may be creating the video all wrong or using the wrong product. I had a photoshop file with layers. I wanted the rain to fall out of the sky, so i made a video with the raindropd falling at a tween of 20 and I had like 380 frames after that. I could figur out how to get another layer to move at a different pace, so I exported the video (many times until i could get it as clear as possible). Then i added the video back in, and added in another layer (the one that was floating in the sky). No matter which setting I used to export the video, it wasn't as crisp as I was looking for. I exported the video and iserted it back in for the movement across the bottom. That came out really clear (but it came from http://videoblocks.com). Do you or anyone else know which is the best settings for me to use in Photoshop CS5? Or is there another program i could use to makke clear videos?
I want the video to be as original as possible.

My first Mac and first experience with iPhoto. Need help

Hello everyone. I just purchased my first Mac, a Mini, last week and I'm trying to learn how iPhoto works. I've been able to import picturs from my NAS (network attached storage) drive which holds all our photos, music and videos.
However, when I took pictures over the weekend, I wanted to put them on the NAS as well and have them automatically import into iPhoto. I like that iPhoto lets you put a description about the pictures, but I can't find a way to type a description and then set iPhoto to save the pictures to my NAS drive.
I ended up just saving them to the NAS drive and then importing again and telling iPhoto to not import duplicates. The problem with that is I get folders called thumbnails and then I get messages telling me the Thumbs.db files are not readable and those are coming from my camera card or the NAS drive, maybe because it was formatted on a PC. I know Thumbs is a PC item.
With my old PC, it allowed me to pick where I wanted my photos stored and what name I would like to call the pictures and then it named them all in succession automatically. Will iPhoto do this and if so, how do I do that? And how do I enter descriptions about my old photos to make them easier to find during a search?
Thanks for the help. While the Mac is very similar to my old PC, there sure are a lot of things I'm unfamiliar with. But with time and some help from experts like you, I'm sure I'll get comfortable with it.
John

John
iPhoto is a photo organiser - that is a database. Like any database the data has to be imported into the application.
What format is that NAS? iPhoto does not sit happily on disks that are not formatted for Mac OS X (journalled). You will find issues with saving changes to the db and with sharing pics among other apps.
You can put a library on an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
With my old PC, it allowed me to pick where I wanted my photos stored and what name I would like to call the pictures and then it named them all in succession automatically. Will iPhoto do t
No. For a start, filenames have no relevance in iPhoto - it's all about visual organisation. You can attach titles, keywords and comments to pics, of course, and can add them to the File on export.
If you want to set the pics in a spot, then do that with the Finder and thereafter import them. You can use a batch file renamer such as FileList to rename the files prior to import.
and telling iPhoto to not import duplicates.
Using a Referenced rather than a Managed library means that iPhoto will not copy the files, but rather simply reference them on your HD. It will create an alias to the Original file, a thumbnail and, if you modify the pics, a Modified version.
However, you need to be aware of a number of potential pitfalls using this system.
1. Import and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
As a general comment: iPhoto is a bit different from most photo apps. It's happiest when it manages the files and lets you go on to manage your Photos. That's a key distinction though, between Files and Pictures. iPhoto is about Pictures, not Files.
You do all your work in the iPhoto Window - there is never a need to go into the Photo Library on the Hard Disk. To find and access photos:
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To use an external editor
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
By all means post again if you need more info.
Regards
TD

BB Desktop Manager no longer works with Mac Maverick - Need Help Urgently

I have been a loyal Blackberry user since the Government of Canada officially began using these cell phones. I feel, however, abandoned by Blackberry (they obviously don't believe that it is easier to retain an existing customer than acquire a new one). I'm using a Blackberry Bold (9900) with a Macbook Pro. Everything was fine until I upgraded my Mac operating system to Maverick; my Blackberry Desktop Manager no longer works, so I cannot sync the content (contacts, calendar) of my phone with my Mac, but that's not the worst of it.
I recently had a momentary lapse and exceeded the 10 password attempts to access my phone... this accidentally wiped my phone clean... and because Desktop Manager does not work with Mac, I do not have a way to recover my data. Rogers was of no help and had Blackberry updated its desktop software months ago, as it should have, this issue would have been moot. I do not know how or why, but I was able to recover most of my data, but I'm not sure just how up-to-date tha data is and am still going through it, but I'm having issues with some functionality.
I'm in the US for several months and have suspended my Canadian services. Prior to the wipe, I was able to use wifi on my phone to send and receive emails with no problem. After the wipe, I can't send emails or bbms. I checked my blackberry internet service and all email accounts are good to go. BBMs are another issue. I need help. Suggestions please.

Apple has ceased synchronization with Mavericks. The issue lies with Apple, not with the desktop software. To mitigate the lack of sync capabilities in Mavericks you can sync your contacts and calender on your Mac with the usual suspects (Yahoo, Google). Create a backup (archive) for Contacts and Calender on your Mac first, then create one of those email accouonts that allow syncing. On your 9900 and with BlackBerry provisioning enabled create the new or existing email account. See which email accounts can sync with BB, I know Yahoo is working fine. For Yahoo, get the Yahoo Calender sync (a few bucks one-off payment required), Contacts sync works off the shelf within BB. If you reset the 9900 you should be able to restore all data with BB DTM. Please note that emails you received during the 9900 reset and the date of restore will not be available on the device. You will still not be able to sync contacts/calender over BB DTM. I hope that helps.
BlackBerry Bold 9900, Blackberry Z10 and BlackBerry PlayBook.

Problem with images. Need help.

I have been trying unsuccesfully fot the past few days on the following applet.
What I would like to do is to use a gif image instead of g.fillOval. So that thers is an image I can drag instead of a circle.
I am very new to this. Any help would be much appreciated.
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class Counters extends Applet implements MouseListener,
               MouseMotionListener{
     private Point counter1, counter2, counter3, mouse, temp;
     private int select;
     public void init(){
          this.addMouseMotionListener(this);
          this.addMouseListener(this);
          select = 0;
          counter1=new Point(25,125);
          counter2=new Point(45,125);
          counter3=new Point(65,125);
          mouse= new Point();
public void paint (Graphics g){
     drawBox(g);
     g.fillOval((counter1.x/20)*20+5, (counter1.y/20)*20+5, 15,15);
     g.fillOval((counter2.x/20)*20+5, (counter2.y/20)*20+5, 15,15);
     g.fillOval((counter3.x/20)*20+5, (counter3.y/20)*20+5, 15,15);
public void mouseDragged(MouseEvent e){
     mouse = e.getPoint();
     if(mouse.getX() >= 20
     && mouse.getX() <= 130
     && mouse.getY() >= 20
     && mouse.getY() <= 130)
     //continuously change the coordinates of the selected counter
     if(select == 1) counter1 = mouse;{
     if(select == 2) counter2 = mouse;
     if(select == 3) counter3 = mouse;
     repaint();
public void mouseMoved(MouseEvent e){}
//require for the interface
public void mousePressed(MouseEvent e){ //select a counter using the mouse
mouse= e.getPoint();
if(mouse.x > counter1.x - 10 && mouse.x < counter1.x + 10 &&
          mouse.y > counter1.y - 10 && mouse.y < counter1.y + 10) select = 1;
if(mouse.x > counter2.x - 10 && mouse.x < counter2.x + 10 &&
          mouse.y > counter2.y - 10 && mouse.y < counter2.y + 10) select = 2;
if(mouse.x > counter3.x - 10 && mouse.x < counter3.x + 10 &&
          mouse.y > counter3.y - 10 && mouse.y < counter3.y + 10) select = 3;
          temp = mouse;
//required for the interface
public void mouseClicked(MouseEvent event){}
public void mouseReleased(MouseEvent e){
     mouse = e.getPoint();
     if (mouse.x > counter1.x - 10 && mouse.x < counter1.x + 10 &&
     mouse.y > counter1.y - 10 && mouse.y < counter1.y + 10 && select != 1)
     counter1 = temp;
     if (mouse.x > counter2.x - 10 && mouse.x < counter2.x + 10 &&
     mouse.y > counter2.y - 10 && mouse.y < counter2.y + 10 && select != 2)
     counter2 = temp;
     if (mouse.x > counter3.x - 10 && mouse.x < counter3.x + 10 &&
     mouse.y > counter3.y - 10 && mouse.y < counter3.y + 10 && select != 3)
     counter3 = temp;
     repaint();
public void mouseEntered(MouseEvent event){}
public void mouseExited(MouseEvent event){}
public void drawBox(Graphics g){
     for(int i= 20; i <= 140; i+=20)
g.drawLine(i,20,i,140);
g.drawLine(20,i,140,i);
}

I have been trying unsuccesfully fot the past few days on the following applet.
What I would like to do is to use a gif image instead of g.fillOval. So that thers is an image I can drag instead of a circle.
I am very new to this. Any help would be much appreciated.
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class Counters extends Applet implements MouseListener,
               MouseMotionListener{
     private Point counter1, counter2, counter3, mouse, temp;
     private int select;
     public void init(){
          this.addMouseMotionListener(this);
          this.addMouseListener(this);
          select = 0;
          counter1=new Point(25,125);
          counter2=new Point(45,125);
          counter3=new Point(65,125);
          mouse= new Point();
public void paint (Graphics g){
     drawBox(g);
     g.fillOval((counter1.x/20)*20+5, (counter1.y/20)*20+5, 15,15);
     g.fillOval((counter2.x/20)*20+5, (counter2.y/20)*20+5, 15,15);
     g.fillOval((counter3.x/20)*20+5, (counter3.y/20)*20+5, 15,15);
public void mouseDragged(MouseEvent e){
     mouse = e.getPoint();
     if(mouse.getX() >= 20
     && mouse.getX() <= 130
     && mouse.getY() >= 20
     && mouse.getY() <= 130)
     //continuously change the coordinates of the selected counter
     if(select == 1) counter1 = mouse;{
     if(select == 2) counter2 = mouse;
     if(select == 3) counter3 = mouse;
     repaint();
public void mouseMoved(MouseEvent e){}
//require for the interface
public void mousePressed(MouseEvent e){ //select a counter using the mouse
mouse= e.getPoint();
if(mouse.x > counter1.x - 10 && mouse.x < counter1.x + 10 &&
          mouse.y > counter1.y - 10 && mouse.y < counter1.y + 10) select = 1;
if(mouse.x > counter2.x - 10 && mouse.x < counter2.x + 10 &&
          mouse.y > counter2.y - 10 && mouse.y < counter2.y + 10) select = 2;
if(mouse.x > counter3.x - 10 && mouse.x < counter3.x + 10 &&
          mouse.y > counter3.y - 10 && mouse.y < counter3.y + 10) select = 3;
          temp = mouse;
//required for the interface
public void mouseClicked(MouseEvent event){}
public void mouseReleased(MouseEvent e){
     mouse = e.getPoint();
     if (mouse.x > counter1.x - 10 && mouse.x < counter1.x + 10 &&
     mouse.y > counter1.y - 10 && mouse.y < counter1.y + 10 && select != 1)
     counter1 = temp;
     if (mouse.x > counter2.x - 10 && mouse.x < counter2.x + 10 &&
     mouse.y > counter2.y - 10 && mouse.y < counter2.y + 10 && select != 2)
     counter2 = temp;
     if (mouse.x > counter3.x - 10 && mouse.x < counter3.x + 10 &&
     mouse.y > counter3.y - 10 && mouse.y < counter3.y + 10 && select != 3)
     counter3 = temp;
     repaint();
public void mouseEntered(MouseEvent event){}
public void mouseExited(MouseEvent event){}
public void drawBox(Graphics g){
     for(int i= 20; i <= 140; i+=20)
g.drawLine(i,20,i,140);
g.drawLine(20,i,140,i);
}

Hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.help?

hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.nothing is loading tho.

I see 10.6.3 in your profile---is tthat what you are trying to load? If so, it won't work. No PowerPC Mac like your G5 can run a Mac OS version higher than 10.5.8

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Curves Circle Symbol Disappeared in Photoshop - Replaced With Curves Icon. Need help

Similar Messages

Maybe you are looking for