Custimizing label not equal

Dear all
Our production server and development server not equal our target is only custimizing label both are equal which profile choose
please guide
SAP_ALL    All Client-Specific Data w/o Change Documents
SAP_APPL   Customizing and Application Data w/o Change Docs
SAP_APPX   SAP_APPL w/o Authorization Profiles and Roles
SAP_CUST   Customizing
SAP_CUSV   Customizing and User Variants
SAP_CUSX   Customizing w/o Authorization Profiles and Roles
SAP_PROF   Only Authorization Profiles and Roles
SAP_RECO   Recovery (Only if Source Client = Target Client)
SAP_UCSV   Customizing, User Master Records and User Variants
SAP_UCUS   Customizing and User Master Records
SAP_UONL   User Without Authorization Profiles and Roles
SAP_USER   User Master Records and Authorization Profiles
thanks
with best regards
venkat

Dear Markus
when i remote clint copy following error find out
Target Client                                  500
Source RFC Dest.:                         PRDCLNT508
System Name:                              PRD
Client in Source System                 508
Copy Type                                    Remote copy
Profile                                           SAP_CUST
Status                                         Cancelled. See Log
User                                           BASIS
Start on                                   14.11.2007 / 10:16:06
Last Entry on                     14.11.2007 / 10:18:24
Last Action:                      RFC DDIC System Comparison
Statistics for this Run
- No. of Tables                      0 of       33,113
- Copied Lines                       0
Warnings and Errors
Table/Object                   Component                Error
TCACS_ASGRL                    ICM                      Table not Convertible
thanks
venkat

Similar Messages

Waterfall chart data labels - not rendering in Flash

I have a problem with the waterfall charts. When I turn on the data labels, the charts fail to render in Flash - I get a axis and some garbled legend icons. If I turn off the waterfall chart data labels, the problem goes away. Clearly, there is some bug in the label coding.
Ken Jones

Make sure you have the "Refresh before components are loaded" option checked on your QaaWS connection for the monthly data in the connection manager of Xcelsius.
To do this go to the connection manager in Xcelsius. Go to the connection you want to edit. Click the "Usage" tab. Then check the first check box that reads "Refresh Before Components Are Loaded".
This will run that query as soon as the dashboard is loaded. I think what may be happening to you now is that you have set a trigger cell of some kind that says, "When cell X becomes "XYZ" run the monthly data query. But when the dashboard is first loaded cell X does not equal "XYZ" therefore the query does not run initially. But then when you click the weekly tab and the back to the monthly tab you are setting cell X to "XYZ", therefore the query runs at that point.
Hope this helps,
Jeff
Edited by: Jeff Hoffner on May 18, 2010 9:07 PM
Edited by: Jeff Hoffner on May 18, 2010 9:07 PM

HTML in Analysis column prompt's label not working

Hi all,
In 11.1.1.6, I have an Analysis column prompt (not a dashboard prompt).
In the prompt label property I have html, which the help dialog box says can be used, however, the html is not displaying as intended. It's showing the html tags along with the text. Even something simple, like just having a bold tag or font color tag doesn't work - it displays this literally.
In 10g, I had the html in the description property and it worked fine. It seems in 11g the description property is for tool tip text.
Any ideas on how to fix this?
Thanks.
Edited by: djflo on Jul 18, 2012 5:34 PM

Use one prompt. Make it a dashboard prompt instead of a column prompt save it to a presentation variable. Then you can apply two filters to the column, one "less than or equal to" your presentation variable and one "greater than or equal to" your presentation variable. Although the default operand is "AND," just click on it and it will change to "OR."
You can also do one filter and just make it "not in/not equal to."

Is not equal to operator not working properly in obiee 11g

Hi ,
I have 5 members in a dimesion ENTITY.gen5 (A,B,C,D,E) .
nOW , I am using a *"is equal to "* operator in that ,
ENTITY.gen5 = A;B .
Which results in a strange error while running the report :
Socket communication error : was attempted on somthing which is not socket .
or sometimes ,
Socket communication error : Oracle BI server is not currently running .
So , I tried with giving "is not equal to" i.e . ENTITY.gen5 != C;D;E .
Then , I am getting A,B,C . C is not desired here .
FYI , I have renamed ENTITY.gen5 member names in essbase once and after refreshing I tried the above .
OBIEE version : 11.1.1.6
essbase version : 11.1.2.1
Thanks in advance

In EM, go to Weblogic Domain, right click on bifoundation_domain and on the Security menu choose Application Policies.
Set Application Stripe to obi and click the blue arrow search button.
Highlight BIConsumer and click Edit.
Under Permissions locate Resource Name oracle.bi.publisher.scheduleReport. Highlight this and click Delete...
Click OK (top right corner).
Now log your user out of OBIEE and back in again, and the option should have disappeared from their New menu.

Not Equals Function is not working in Mapping

Hi All,
i have to do mappig based on the Not Equals & And conditions
If the Material Group starts with "F"
                        And Material Type Not Equals to "ZPRO" means
                                    then send "FG" Else "FC"
Here Not Equals & And Functions are not giving success, Error throwing like
Cannot cast ZPRO to boolean] in class com.sap.aii.mappingtool.flib3.Bool method not[ZPRO
Please help in this
Regards

i have to do mappig based on the Not Equals & And conditions
If the Material Group starts with "F"
And Material Type Not Equals to "ZPRO" means
then send "FG" Else "FC"
Here Not Equals & And Functions are not giving success, Error throwing like
Cannot cast ZPRO to boolean] in class com.sap.aii.mappingtool.flib3.Bool method not[ZPRO
the logic applied is incorrect
NotEquals is a boolean function meaning it will accept only boolean values as input....
To check if the Material Number is ZPRO or not use the below logic
MaterialNumber                                            Then(FG)
                      ------equalS(TextFunction) ---- not -----ifWithElse ------------------ Target
Constant (ZPRO)                                                   Else(FC)
Regards,
Abhishek.

HOW TO BLOCK DELIVERY OF GOODS WHICH ARE NOT EQUAL TO SALES ORDER

Hi,
I want to block user to create any sales invoice for some customers based on sales order where quantity in sales order is not equal to invoice.
Thanks,
Anitha

Hi Anitha,
You can do this by selecting check marks on two field under BP Master data >>Payment Terms
1) Allow Partial Delivery of Sales Order
2) Allow Partial Delivery per row.
Thanks,
Regards,
Sudhir

Is BDC's CALL TRANSACTION 'VA01' is not equals to ONLINE(manual) creation?

Hi Experts,
Ours is IS-Oil.
If the user do not enters/inputs OIC_MOT (Mode Of Transport) at ITEM level on the External Details popup, SAP will get it from Customar Master-KNA1 and populates on it, because its a mandatory field (OIC_MOT), but, do not throws an Error message and interupts the sales order creation process.
We have a inbound IDOC posting function module for sales order (VA01), which posts the sales oreders by using BDC (CALL TRANSACTION 'VA01') in the system. In this function module, we are not populating the OIC_MOT field contained segment by hoping SAP will populate/default it while it hits CALL TRANSACTION 'VA01' of my BDC of my FM of IB IDOC. But, SAP is not defaulting/populating and throwing error message (saying 'OIC_MOT field is a mandatory input field' data is missing) and IDOC is failing, pls. let me know Wht its so? is the BDC's CALL TRANSACTION 'VA01' is not equals to ONLINE (manual ) creation of sales order?
Thank you

Hi
Several transactions can ba a different behavior between online and bdc process, but if you simulate the trx by SM35 you should find out these gaps
I don't know OIL vertical, but the main transactions have a bapi can be used insted of BDC program (BAPI_SALESORDER_CREATEFROMDAT2, but perhaps there's a particular BAPI for OIL).
Max

Not Equal to Clause in BODS

Hello Experts -
I need to put this condition in transformation in BODS table1.col 1 Not Equal to table2.col2 .
I am not able to find NOT EQUAL TO clause in BODS. I have used != , But not working.
However equal to (=) is working fine.
Any suggestion how I can use not equal to ? (I want it in Where Tab)
Thanks
R

Rohan, please pull/drag your columns into where clause. do not simply write them. and for your condition chk it with " <> " .
hth
thx
deep

Succession of TaskSelectionEvent.getTaskIds is not equal to user selection

Dear all,
My configuration is JDev 11g R1 (11.1.1.4.0) and I'm currently working at ADF DVT Project Gantts.
At the moment a problem occurs within the TaskSelectionEvent: The order of the task Ids coming back from TaskSelectionEvent.getTaskIds are not equal to the order of my selection. I 'm selecting first task A and then task B. The method give back [B, A].
The code snippets based on the Oracle ADF faces demo:
JSP:
<dvt:projectGantt id="mygantt" startTime="2008-01-01"
endTime="2011-12-31" var="task"
value="#{PG.model}"
tooltipKeys="#{PG.tooltipKeys}"
tooltipKeyLabels="#{PG.tooltipLabels}"
dataChangeListener="#{PG.handleDataChanged}"
actionListener="#{PG.handleAction}"
partialTriggers="ctb2"
taskSelectionListener="{PG.handleSelectedTask}">
</dvt:projectGantt>
Java:
private List selectedTaskIds;
public void handleSelectedTask(TaskSelectionEvent evt)
selectedTaskIds = evt.getTaskIds();
What am I doing wrong?
Thank you in advance.
Best regards,
Tom

For the use case where tasks need to be linked (user clicks the "Link" icon in toolbar after selecting tasks), getTaskIds() in handleDataChanged() would return ids in the order tasks were selected.

OBIEE Answe: Error when using "is not equal to/is not in" option in filters

Hi there,
I have a report with a column that uses EVALUATE function. I want to filter the results of the report by the values of this column. There's no problem when I use "is equal to/is in" option in the filter options. However with everything the same, when I try to apply "is not equal to/is not in" option I got an error message reading :
"Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value @{pv_Period_End}{@{system.currentTime}[YYYY-MM-DD]} from @{pv_Period_End}{@{system.currentTime}[YYYY-MM-DD]} does not match the specified format. (HY000)"
The column is the following funciton:
CAST(EVALUATE('pob.Get_PP_Status(%1, %2)',"ПРЕПИСКА".PP_ID, DATE '@{pv_Period_End}{@{system.currentTime}[YYYY-MM-DD]}' ) AS CHAR(500))
Do you any ideas where the problem might be?
Kind regards,
Danail

Thru note 1909504 the Function Module FI_TAX_CALCULATION was changed and caused the error on the system of my customer.
Hope that helps.
Regards
Udo

Unable to Create "Not Equal to" condition in Variable creation

Hi ,
I am getting an error while creating variable at report level,
Well, my condition at variable creation is ----> sum(A) where [country] <> " x" ...(It is showing the results when the country is equal to x) and the converse for the same ... If I use [country] = "x" .. It is taking as country not equal to x ..
Please suggest me on this..
Thanks in advance ....

Hi ,
I am getting an error while creating variable at report level,
Well, my condition at variable creation is ----> sum(A) where [country] <> " x" ...(It is showing the results when the country is equal to x) and the converse for the same ... If I use [country] = "x" .. It is taking as country not equal to x ..
Please suggest me on this..
Thanks in advance ....

Rounding off Issue (Net Value not equal to Net Price * quantity)

Dear Gurus,
Here is an interesting issue.The default calculation done in the pricing procedure is two decimal places.Now we consider a real scneario,consider the net value of 324 quantities of an item calculated is 36,049.86 .When it is divided by quantity the resulting value of net price is 111.265 but the system shows 111.27 by rounding it off.
Now here comes the problem,my client needs the rate to be shown on the order script to be two decimal places and the net value should be equal quantity * net price.So if we apply this,
324 * 111.27 = 36051.48
But the net value calculated by the system is 36,049.86.So it can be consluded that:
"Quantity * Net Price Shown is not Equal to Net Value calculated by the System"
Need an urgent resolution,project is stuck on this
Regards,
Sam Ahmed
Edited by: Lakshmipathi on Nov 3, 2011 12:14 PM
Please dont add URGENT in subject or in your post

Here is the pricing procedure,
We start with the amount condition types
                                        Unit Price        Units Condition Value
ZMRP     MRP                     1,700.00           10     PAC     55,080.00
ZTRP     Trade Price     1,445.00           10     PAC     46,818.00
ZDPR     Dist. Price     1,445.00           10     PAC     46,818.00         (GL)
Using Trade Price we apply the product discount of 23%
ZPRD     Product Discount     23.000-     %                    10,768.14-
Then we send discount amount to the gl by using condition type ZDIS
ZDIS      Discount Value     100.000-     %           10,768.14-      (GL)
tHE RESULTING NET VALUE IS 36,049.86      as 46818.00 - 10,768.14
     Order Item value     111.27      1     PAC     36,049.86
And the Net Price is 111.27

In a purchase order for 3 GR's Quantity does not equal the value

Hi,
I have found the difference in one purchase order, there have been 3 GRs where the Qty does not equal the Value. How has this happened?
Any guesses why the difference has come.
Thanks&regards,
Veena

Hi Vishal,
In po history for agt 3 Gr's Quantity does not equal the values. I hope the difference is Movement types. But exactly where to check this movements i am not getting.
Can you tell me this which T.code.
Tx,

Labels not printing

hi Friends,
kindly guide me as i am having problem using transaction MIGO.
when i do goods receipt in transaction, i flag the check box (Print via output control)beside the individual slip then i save it. but when i check the material documnet number created, the check box is not flagged anymore. this cause the labels not to be printed. please help. advice what configuration am i missing and what transaction should i o to set up this.
thank so much!

Hi Allan,
You can maintain Output Control settings for printing in OPK8. Please maintain the necessary settings like settings for Output Device, Spool Parameters for user.
I think you are unable to get spool generated so you are unable to print while GR.
Pls. try with above settings and check.
Reward if useful.
Regards,
Tejas

=Time.isTimeWindowOpenNow - is there a NOT EQUAL option?

Hi,
I am trying to stop a job in a chain from running on a Friday for example.
As a precondition I basically need the opposite of =Time.isTimeWindowOpenNow or I need a option to do a NOT EQUAL to expression.
Is there a format to use to set a precondition like this?
(I am using the free version of CPS so I cannot set up custom Time Windows)
Thanks,
Adriaan

Hello Adriaan,
This function actually exists for days in the week, very useful in static recurring situations. But you know you are more flexible with time windows in terms of compensations for holidays etc.
Lets get to it though :-):
=Time.isDayOfWeekInSetNow('_XXXXX_') allows you to specify the days in the week the function should return true. The String contains 7 characters, every _ specifies a day you are not interested in, every X specifies a day you are interested in. The String goes from Sunday to Saturday, so my example specifies the working days.
Regards Gerben

Custimizing label not equal

Similar Messages

Maybe you are looking for