Custom 404 Page Not Found, can't get it to work...

Environment: 1 CF webserver, 2 websites on the webserver
(www.example1.com,www.example2.com)
Problem: I want to create a custom 404 page not found for
each site.
I can't use the "Site-wide Error Handler " in the CF
administor because it makes the 2 sites share the same 404
template. I've also tryed to set the IIS Custom Error properties
but when i do that I still get the ColdFusion defined (not my
custom page) 404 message. Help.. I'm sure there is a way to do this
some how... Thx

Forgot to mention, the 2 sites are in seperate folders.
Thanks

Similar Messages

Custom 404 Page not found

Hi All,
I want to replace the default 404 Error page with my custom page. So, when the user type in something like, http://localhost:50000/indexnotavailable.html (indexnotavailable.html is really not available), they will be going to my custom 404 page.
I have been looking through the forum and found some suggestion to put <error-page> tag to the web.xml file of the application which required a custom 404 page. My question is, where can I do this for the scenario I described above?
Thanks,
Johannes

Forgot to mention, the 2 sites are in seperate folders.
Thanks

HTTP Error 404: Page not found on my 8520?????

hi hope you can help me i use my phone loads for facebook and get notifications sent to my phone but when i click on one and i wnt to go into a group via the noticication on my phone i get HTTP Error 404 Page not found can anyone please help me its been like this for a couple of weeks now thank you x

Hi Nehal
We have found the issue . We were using wrong http script .
But we faced another HTTP error :
http error 401 unauthorized 5024 breach of security
when I want to store business document via GOS in VF03

I'm getting a message "404 (page not found error)" I think I entered an incorrect URL into my browser's address bar. How do I fix that?

I was trying to post a comment on a support group site. I was asked what web address I was using, or something along those lines. In hindsight, I stupidly typed a '?' and pressed send. Now, when I try to access that site I get the message "404 (page not found error)
If you're the site owner, one of two things happened:
1. 1) You entered an incorrect URL into your browser's address bar, or
2. 2) You haven't uploaded content."
How can I fix this.

I spoke with a Dell technician about this problem. He tried to access the site in question from his computer, i.e. separate from my computer, and he also got the same "404 (page not found error)". He said the problem lies with the site itself, not my computer, and that I should notify the site. Problem is I can't notify the site if I can't access it.

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Ent 9 - Can't run mgmt console - admin.cwr gives Error 404: page not found

Post Author: Alan Weiner
CA Forum: Deployment
We just did a fresh install of Crystal Enterprise 9. When we try to run the Management console, we get an "Error 404: page not found"
http://wdcwfc80/crystal/enterprise9/admin/en/admin.cwr
Error 404: The page cannot be found

Post Author: Alan Weiner
CA Forum: Deployment
From the server (although, it uses a browser to connect)
colin mackenzie:
Hi Alan Weiner.
Do you get this message when you run this from the server? or just the workstation / client browser?

Integration Directory : getting 404 Page not found error while accessing In

Hello,
When i am trying to open the Interation Directory, it is showing me 404 Page not found Error.
Some Description
- Executing sxmb_ifr,
- From http://erpsys07:50300/rep/start/index.jsp,i am getting mentioned error when i am trying to access Integration Directory from URL.
erpsys07 -> Central SLD -> J2ee Port - 50100
erpsys07 -> PI system -> J2ee Port - 50300
When i am clicking on integration directory link, it is pointing to Central SLD J2ee Port (50100) instead of 50300, it is pointing to
http://erpsys07:50100/dir/start/sso/Directory.jsp instead of http://erpsys0750300/dir/start/sso/Directory.jsp.
Could some help me where to change and what to change?
Thanks,
V.SINGH

Have you checked port in Netweaver Administration?
See which port is mentioned there. (If you are using PI 7.1)
Check in SXMB_ADM transaction, and in your RFC Destination, where it is pointing.
Thanks,
Hetal
Edited by: hetal shah on Nov 24, 2009 4:49 PM

Download Photoshop CS3 from Adobe when I click the link I am getting http 404 page not found.

I have a copy of Photoshop CS3 on my old Macbook. Need to move to my new Macbook with no CD drive. Following instructions it says to download CS3 and enter serial number. When I attempt to download from Adobe and click the link I am getting http 404 page not found.

Download CS3 products
Works for me. If there are issues, use another browser and check your network configuration.
Mylenium

Embeded PLSQL Gateway & 404 page not found issue

Hi
If I use APEX_ITEM.TEXTAREA with Embeded PL SQL Gateway and submit the page, it throws "HTTP 404-page not found" error.
It doesn't happen when I use apache server instead of EPG.
Our production APEX is down because of this issue.
Any help/suggestions would be greately appreciated.
Here are the simple steps to reproduce the same in a EPG environment.
Note: It works fine in apex.oracle.com [http://apex.oracle.com/pls/otn/f?p=20193:6]
Create a blank page with a report region for the following query. Add a self submit button to it. Run the page and hit the submit button and you will get 404-page not found error.
SELECT APEX_ITEM.TEXTAREA(3, 'a' || lpad('z',1999),3,80) COMMENTS
FROM dual
CONNECT BY ROWNUM <=10
Note:
If you want to see this error in the same browser : exec
dbms_epg.set_dad_attribute('APEX',
*'error-style',*
*'DebugStyle');*
Ref: --blocked::[http://daust.blogspot.com/2008/04/troubleshooting-404-not-found-error-on.html]--
To increase the loging level: SQL> execute dbms_epg.set_global_attribute('log-level', 7)
Thanks
Balaji Chellappa

Hi Masa,
I am also facing the same issue. After creating a Target Mapping tile for our custom application, when I save I get the below error :
Configuration changes not saved for tile 'Target Mapping'
Error (404, Not Found) in OData response for PUT "/sap/opu/odata/UI2/PAGE_BUILDER_CUST/PageChipInstances(pageId='X-SAP-UI2-CATALOGPAGE%3Aicch_report',instanceId='00O2THPMYBCTODLKRWF1EBX3F')": HTTP request failed Details: Resource PageChipInstance not found.
I assigned a customizing transport as suggest in your response and saved again, but that did not help either.
The surprising thing is, when our basis consultant (who has SAP_ALL) saves the tiles, he can save them. This tells me that all the necessary services to create/save the tiles are active.
We have tried to trace my userid for missing authorizations - but none was found.
Not sure what is causing the error when I save the tile..
Regards
Kalpana

Applying changes to report queries results in HTML 404 page not found

Hello,
When I try to change report queries (especially by using multiple queries) I frequently get HTML 404 page not found.
This happens when I click Apply Changes after I edited the query, but also quite often just when I try to confirm the changes in the query.
When I logout and then login again, after a few tries, I finally succeed.
The problem of HTML 404 page not found appears quite a few times, even when I try to delete a query or to open one for editing
Can anyone help me out here? It is really frustrating any development of reports with APEX
I'm using APEX version 3.1.2.00.02 with Oracle XE

Where do you publish your site and how do you upload the files?
What is the URL of your site?

Assigning a Muse Template to the 404 Page Not Found page

I recently create a template for my blog by doing the following:
I created a template in Muse
I added the tag {tag_pagecontent} to a page in Muse and assigned the page to the template.
I then uploaded that page to Business Catalyst.
BC looked at the page I created in Muse as a template. I'm assuming this is because it had the {tag_pagecontent} tag.
I then assigned the page to the blog and everything worked perfectly.
Now I would like to assign the main template on my web site to the 404 Page Not Found page so that the pages are consistent. How can I do this?
How can I get BC to recognize a page created in Muse as a BC template? Or simply, how can I assign a template created in Muse to the 404 pages without adding a {tag_pagecontent} or similar tage in Muse? I currently do not see any of the templates I created in Muse as an option to select.

Hi Rick,
In order to access all the menu items on BC, kindly follow the below steps:-
1)On the BC dashboard, expand the dropdown on the top right side that has your name.
2)Select 'My details'
3)Scroll down and check 'Enable online content editing' check box.
4)Save the details.
5)It will ask for the password, enter it and click continue.
6)Check the site manager menu again. It should have all the submenus.
Regards,
Neha

Downloading Adobe Reader from distribution licence link - 404 page not found

I have recently applied for the Adobe distribution licence for Adobe Reader. This was successful, shortly after applying I received an email with the licence attached and a download link for Adobe Reader XI, The problem is the link doesn't work I just get 404 page not found, the link I cannot put on here as the licence will be broken.
For full installers:
To download the English language version of Adobe Reader XI with Acrobat.com in compressed .exe format, click here.
You may not share the above link, share information with others, or publish the above link on websites, blogs, or by any other means that can be publicly accessed. The information contained on this site is meant for your use only in accordance with the Adobe Reader Distribution License Agreement you accepted. You may direct others to http://www.adobe.com/products/reader/rdr_distribution1.html to request distribution rights.
What i need to know is can anyone (from Adobe) send me a replacement link, can I re-apply for the licence to get another link or even better under this licence can I download the software from Adobe - Adobe Reader download - All versions instead. I have contacted Adobe chat support who directed me to phone support, phone support flat out refused to help and said the only support would be via this forum.
Hopefully someone here can answer my questions.
Thanks all.

Brilliant thanks, I see nothing wrong with downloading from here, it even states "In order to distribute Adobe Reader software you need to have a valid Adobe Reader Distribution Agreement in place" which I do.
Thanks again ~graffiti

HTTP 404 page not found error !! on tabs

Hello All,
I am having a page with multiple tabs . When the user navigates from one tab to another tab ( using standard tab set ) from interactive report I am getting the HTTP 404 page not found error .
The tabs are in the following fashion.
home page#1
varlist page#2
criteria page#7
dynamic report page#10
interactive report page#15
I can move forward by selecting the tabs but when i am in interactive report tab and select any of the other tabs i am getting HTTP 404 page not found error..
Can any one help me .
thanks/kumar
Edited by: kumar73 on May 5, 2010 2:45 PM
Edited by: kumar73 on May 5, 2010 2:46 PM

Hello Jarola / All,
Selected Pseudo Parent Tab: TS1
Select Standard Tabs: DBTable, variables , condition , Report , interactive report.
When I am navigating from tab interactive report to any other tab the url is chaning to
http://cosmo:8080/apex/wwv_flow.accept - resulting in HTTP 404 page not found error ..
but when navigating with in the following tabs
DBTable page#1
variables page#2
condition page#7
report page#10
I am having different url like example -
http://cosmo:8080/apex/f?p=125:7:1075354762414252::NO
Can any one tell me why i am unable to navigate from interactive tab to other tabs ..
================================
I uploaded the applicatoin in oracle.apex.com
http://apex.oracle.com/pls/apex/f?p=29558:1:3623891857047276:::::
please find the link above .
===================
The database tables are huge and inorder for me to replicate at oracl.apex.com I got to load the full schema which is not possible . May be you can go through the code to understand whats going wrong.
thanks/kumar
Edited by: kumar73 on May 6, 2010 6:46 AM
Edited by: kumar73 on May 6, 2010 1:00 PM
Edited by: kumar73 on May 6, 2010 1:01 PM
Edited by: kumar73 on May 6, 2010 1:04 PM
Edited by: kumar73 on May 6, 2010 2:46 PM

404 page not found error after upgrade to 4.0 from 3.x

We developed this application in 1.6 and a couple years ago upgraded to 3.2. We've just upgraded the Production version to 4.0.0 (that's what was on the Dev box). I understand that the template we used when developing it is now obsolete and I added some stuff to make it work properly (found tips here). In Dev it seemed to work correctly but now that it's in production we're getting a 404 Page not found error which "seems" to only occur after a search returns some results and you change the search criteria and try to rerun the search with this modified criteria without first leaving that page (if you click to a different tab and back before changing the search criteria you don't get the error). It doesn't matter which criteria field you change (date, text, LOV) the error comes up consistently. The criteria is submitted via a button (Go request). It's a PL/SQL function body returning SQL query. The only processes that are run is a Reset Pagination on the Go request.
Is there some quick setting that can be changed that causes this? Or something in 4.0 that is different that I need to change when submitting a page, etc... I can't see anything in the debug & all the variables do have appropriate values.

A column in the search results was changed to a Simple Checkbox when we upgraded to 4.0 (it has always been a checkbox in the older APEX versions). When I put it back to Standard Report Column I no longer get the page not found error.
Is there some additional/different setting I need to do in order to use the simple checkbox option in a search results set?
ETA: I see now that Checkboxes are not intended to work in standard report regions so I'll change them to LOVs or something and my problem should be solved.
Edited by: mimi_jones on Jul 18, 2011 6:16 AM

404 Page Not Found from the Page Definition

Version 1.6
I'm trying to run my app by clicking on the stop light on the Page Definition screen and I'm now getting a 404 Page Not Found error. There is NO entry in the Apache Error log, however, there is an entry in the Access log which is:
htmldb_public_user [03/Oct/2005:15:02:52 -0500] "GET /pls/htmldb/f?p=110:1:4702644663970887147::::: HTTP/1.1" 404 326
Obviously, the 404 is the Page Not Found code, but what is the 326?
Can someone help with this?
Thanks,
Joe

Sorry forgot to add back the details.
Note: 295550.1 Says its still around in 10.1.0.3 but not 10gR2.
Symptoms
After ugrading database to 9.2.0.6 : GET /pls/htmldb/wwv_flow.accept HTTP-404 ORA-06502
WHEN CONNECTING TO HTMLDB
Cause
This problem was reported in Bug 4015165 10.1.0.3 PLSQL 10.1.2.0.0 PRODID-11 PORTID-453
Abstract: REGRN:SCALAR VARCHAR2 IN BINDS WITH DIFFERENT SIZE RANDOMLY FAILS WITH ORA-6502
Solution
Install the following patch from metalink Patch 4015165.

Custom 404 Page Not Found, can't get it to work...

Similar Messages

Maybe you are looking for