Custom Actions upload error in 12.2
Hello!
I have error while uploading custom action in MII 12.2:
[005056A30000244C0000000D00001398] File could not be loaded. com.sap.xmii.temp.upload.17164.jar. Check error log for details.
There are 3 error and warning types in Log Viewer:
1) Could Not Find Assembly File GaCustoms.jar
2) MISSING_ASSEMBLY_FILE
3) *** MISSING RESOURCE: Unable to localize MISSING_ASSEMBLY_FILE
It works normaly with MII 12.1.8.
I've got new blssdk.zip from 12.2 and just recreated .jar file.
<?xml version="1.0" encoding="utf-8" ?>
<ComponentCatalog>
<Category Name="GaCustoms" Description="GaCustoms">
<Component Type="Action"
Name="DosEncodingSaver"
Description=""
Label="DosEncodingSaver"
ClassName="DosEncodingSaver.DosEncodingSaver"
AssemblyName="GaCustoms.jar"
HelpFileName="" />
<Component Type="Action"
Name="Base64Saver"
Description=""
Label="Base64Saver"
ClassName="Base64Saver.Base64Saver"
AssemblyName="GaCustoms.jar"
HelpFileName="" />
</Category>
</ComponentCatalog>
Edited by: A.Andreev on Nov 11, 2011 10:55 AM
Similar Messages
-
Based on the "Developing Custom Action in in SAP MII 12.1" i encountered error while running the action block in BLS. In Link Editor I assign 2 values in Inputs and Output to a tracer. When I execute this BLS, I receive following error
[ERROR] [Tracer_0] Link ('Tracer_0.Message' [Assign] from "SimpleAction_0.Output") execution threw an exception. Exception: Invalid variable: SimpleAction_0.Output [Unknown variable: SimpleAction_0.Output
[ERROR] [Tracer_0] Action: Runtime threw an exception. Exception: [Invalid variable: SimpleAction_0.Output Unknown variable: SimpleAction_0.Output
The code is exactly like in the document
package customactions;
import com.sap.lhcommon.common.*; // Needed for the VariantDataTypes and
import com.sap.lhcommon.exceptions.DataConversionException;
// VariantData types.
import com.sap.xmii.bls.sdk.*; // This is the main SDK for custom actions.
* This is a simple action construct used to show how to use some of the basic
* MII 12.1 Custom Action constructs.
public class SimpleActions {
* To ensure the parameters are always named the same, it is good practice to
* create a static final string with the parameters name. This also make it
* easy to use across actions.
private static final String PARAM_OUTPUT = "Output";
* Describes a simple action that adds two numbers together.
* @param instance This is the action instance. This is the main interface
* from the action code back into the transaction engine. Most
* users will only need to set their variables through this
* interface, though much more powerful operations are also
* available.
* @param in1 This is an input into the action. The type is detected by the
* transaction engine and automatically cast to the correct value.
* @param in2 This is a second input.
* @throws InvalidVariableException This exception is
@Action(name = "AddTwoNumbers") // This annotation tells the engine that this
// is an action available to execute.
@Outputs(names = { PARAM_OUTPUT },
types = { VariantDataTypes.INTEGER }) // This annotation tells
// the engine that one
// integer output called
// 'Output' is going to be
// returned.
public static void addTwoNumbers(
IActionInstance instance, // Besides the basic types, the
// IActionInstance interface is the only
// other type allowed to be defined in
// parameter list of a custom action.
@Input(name = "Input1") int in1, // @Input annotations are used to
// indicate the user modifiable
// inputs to this action.
@Input(name = "Input2") int in2)
throws InvalidVariableException { // Exceptions can be thrown directly from
// the actions without causing critical
// execution failures. These exceptions
// will be caught and logged by the engine
// and will cause the Success flag to be
// set to false.
// The following code describes how to set an actions output.
try {
instance.setActionResult(PARAM_OUTPUT, in1 + in2);
} catch (DataConversionException e) {
// TODO Auto-generated catch block
e.printStackTrace();
the catalog is
<ComponentCatalog>
<Category Name="Custom" Description="Custom">
<Component Type="Action" Name="AddTwoNumbers"
Description="" Label="SimpleAction"
ClassName="customactions.SimpleActions"
AssemblyName="SimpleActions.jar" Dependencies=""
HelpFileName="" />
</Category>
</ComponentCatalog>
Is there anything I might have done wrong?hargoe
and do you know why my icon does not show up? it just black.
@Action(name = "AddTwoNumbers", icon="icons/CustomAction.png")
i created a package called icons and in this package I have a .png file called CustomAction.png
I copied this CustomAction.png from another .jar and it works for that jar.
thanks -
Acrobat 10 Professional/Standard Custom Action Installation Errors
Hi,
i am getting some strange installation errors on several of our machines, during the installation of Acrobat Pro/Standard. The OS is Windows 7 32Bit.
The error gets raised by a custom action (install port scan) of the msi. The error also occurs during uninstall, and shows up as a pop up which says "installation failed", no further description in the message box. After confirming the message box, the installation proceeds normal und succeeds.
The problem is, that the message box cant be suppressed by a silent install, /qb-! /qn switches are not helping either, so the SCCM deployment of the package will time out and leave the installation in a undefined state.
Does anyone know what this custom action is doing and what the reason for this error could be?
Thanks in advance
PeterI have exactly the same problem. Just downloaded FrameMaker 10 from the Adobe website. Trying to install on 64-bit Windows 7.
The error log doesn't give any useful information:
----------- Payload: {E5DD149F-8370-48F9-A32C-2E3DC776CFFB} AdobeJRE 1.6.0.0 -----------
FATAL: DS003: Cannot extract 'C:\Users\JRobertson9\Desktop\Adobe FrameMaker 10\Adobe FrameMaker 10\payloads\AdobeJRECS5-mul\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{E5DD149F-8370-48F9-A32C-2E3DC776CFFB}'. Error: Error 0
----------- Payload: {BAE5212B-6651-4AD8-B26A-1B284D2665C6} AdobePDFL CS5 9.9.0.0 -----------
FATAL: DS003: Cannot extract 'C:\Users\JRobertson9\Desktop\Adobe FrameMaker 10\Adobe FrameMaker 10\payloads\AdobePDFL9.9-mul\Assets2_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{BAE5212B-6651-4AD8-B26A-1B284D2665C6}'. Error: Error 0
----------- Payload: {E0749EE5-57BB-4FA1-9802-8724F8F61BD7} Adobe FrameMaker 10 10.0.1.0 -----------
FATAL: DS003: Cannot extract 'C:\Users\JRobertson9\Desktop\Adobe FrameMaker 10\Adobe FrameMaker 10\payloads\AdobeFrameMaker10.0.1_LI\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{E0749EE5-57BB-4FA1-9802-8724F8F61BD7}'. Error: Error 0
WARNING: DW036: Payload cannot be installed due to dependent operation failure
While it's probably not the cause, if I'm being totally honest, trying to use a temp directory under Program Files is a pretty dumb thing to do. -
Hi,
I have followed all of the steps for uploading a custsom image template, but I get this error on upload:
PS C:\> CD
PS C:\> CD C:\Users\admin.xxxxxx\Downloads
PS C:\Users\admin.xxxxxx\Downloads> .\Upload-AzureRemoteAppTemplateImage.ps1 -SAS "?sv=2012-02-12&sr=b&si=b9db439c-0
f-485d-afc3-b42da6271843&sig=PkFMqu1ep1wtO26o%2Bdxo9sAtMiVtPubPH4SryvbWA0I%3D" -URI "https://liverdbrwu0.blob.core.win
ws.net/goldimagestaging-6f931502-25b6-4b7c-ad48-084fa25f7b97/b9db439c-00ef-485d-afc3-b42da6271843.vhd"
VERBOSE: Importing Storage module...
VERBOSE: Loading module from path 'C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Storage\Storage.psd1'.
VERBOSE: Loading 'TypesToProcess' from path
'C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Storage\Storage.types.ps1xml'.
VERBOSE: Loading 'FormatsToProcess' from path
'C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Storage\Storage.format.ps1xml'.
VERBOSE: Loading module from path 'C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Storage\Disk.cdxml'.
C:\Users\admin.RDSGURUS\Downloads\Upload-AzureRemoteAppTemplateImage.ps1 : Please close all powershell windows and try
executing the script again on a new powershell window. If you are running the script from Azure powershell window,
please switch to a Windows powershell window and retry.
At line:1 char:1
+ .\Upload-AzureRemoteAppTemplateImage.ps1 -SAS "?sv=2012-02-12&sr=b&si=b9db439c-0 ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException
+ FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorException,Upload-AzureRemoteAppTemplateImage.ps1
PS C:\Users\admin.xxxxxx\Downloads>
I have shut the powershell window, and re-executed, but it fails. In azure, the upload shows up as pending.
please help!
Hope this helps,
Kristin L. Griffin
SUPER BIG fan of the Remote Desktop Virtualization Team!!!)
My RDS blog: blog.kristinlgriffin.com
Get the
Microsoft Windows Server 2008 R2 Remote Desktop Services Resource Kit !Yes I did that. That is not the issue. I actually just started the upload again under another name and it worked. I never could figure out how to resume that old template upload. but to me, if the button for re-getting the script is grayed
out, the problem was in azure.
Hope this helps,
Kristin L. Griffin
SUPER BIG fan of the Remote Desktop Virtualization Team!!!)
My RDS blog: blog.kristinlgriffin.com
Get the
Microsoft Windows Server 2008 R2 Remote Desktop Services Resource Kit ! -
Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David BaurI finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur -
Screenshot:
Setup Log:
Property(S): ProductToBeRegistered = 1
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 1708
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2205 2: 3: Error
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1708
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2205 2: 3: Error
MSI (s) (8C:BC) [10:55:05:914]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (8C:BC) [10:55:05:914]: Product: Microsoft System Center 2012 R2 Service Manager Authoring Tool -- Installation failed.
MSI (s) (8C:BC) [10:55:05:914]: Windows Installer installed the product. Product Name: Microsoft System Center 2012 R2 Service Manager Authoring Tool. Product Version: 7.5.3079.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation
success or error status: 1603.
MSI (s) (8C:BC) [10:55:05:918]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:BC) [10:55:05:918]: MainEngineThread is returning 1603
MSI (s) (8C:78) [10:55:05:920]: RESTART MANAGER: Session closed.
MSI (s) (8C:78) [10:55:05:920]: No System Restore sequence number for this installation.
=== Logging stopped: 2/27/2014 10:55:05 ===
MSI (s) (8C:78) [10:55:05:921]: User policy value 'DisableRollback' is 0
MSI (s) (8C:78) [10:55:05:921]: Machine policy value 'DisableRollback' is 0
MSI (s) (8C:78) [10:55:05:921]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:78) [10:55:05:921]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:78) [10:55:05:921]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:78) [10:55:05:922]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (8C:78) [10:55:05:922]: Restoring environment variables
MSI (s) (8C:78) [10:55:05:922]: Destroying RemoteAPI object.
MSI (s) (8C:9C) [10:55:05:922]: Custom Action Manager thread ending.
MSI (c) (E4:DC) [10:55:05:923]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E4:DC) [10:55:05:924]: MainEngineThread is returning 1603
=== Verbose logging stopped: 2/27/2014 10:55:05 ===
I am trying to install on Windows 7 Ent. and Windows 2012 (both attempts fail with same error).
The VS 2008 shell piece was installed, however, as others have experienced the prereq check issue, I removed it from the input file in the setup folder, which resolved that piece.
Any suggestions?
Thank you.
Regards, Zoeb KhanWhen installing the VS Isolated Shell, make sure the actual binaries (found on the root drive or where you extract the web installer) are installed. This will resolve the above error and also the Prerequisite issue that a lot of people are coming across.
Regards, Zoeb Khan -
I'm installing the SCSM2012 Management Server
component on a SQL dev box. During the installation, the very last step (Import Management Packs) fails with this error:
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
I've already verified that the account I'm logged in with has SA access to the SQL database. Windows 2008 R2 firewall is turned off.....
Has anybody else run into this problem?I don't see anything indicative in the setup log. The setup seems to get all the way to the part where it installs the management packs. Then right after that is when the installation fails and it rolls back.
From the setup log, towards the end:
Property(S): ACTIONSUSER = NETWORK SERVICE
Property(S): ACTIONSDOMAIN = NT AUTHORITY
Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
Property(S): ProductToBeRegistered = 1
MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
=== Logging stopped: 11/7/2011 17:33:22 ===
MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/7/2011 17:33:23 === -
An error occurred while executing a custom action:_PopulateUserRoles
I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this rollAfter this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
These are the steps (I had to create the DWORD 32 bit):
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
On the Edit menu, point to
New, and then click DWORD Value.
Type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type 60000, and then click
OK.
This value represents the time in milliseconds before a service times out.
Restart the computer.
Hope this helps!
BR,
Robert
Robert -
Monitor stopped due to setup error or custom action
Hi folks,
i have installed the sun cluster and created a resource group for my oracle database. I have created resourece's for database server and or listener.
My question is when I am issuing the scstat command on my oracle server resource i get the following mesg.
"Monitor stopped due to setup error or custom action"
What does it means, does anybody give me some hint about it.
- Resource Groups and Resources --
Group Name Resources
Resources: aaa-rg DB1-aaa-rs aaa-lh-rs aaa-srv-rs aaa-lsnr-rs
-- Resource Groups --
Group Name Node Name State
Group: aaa-rg medsrv5 Online
Group: aaa-rg medsrv6 Offline
-- Resources --
Resource Name Node Name State Status Message
Resource: DB1-aaa-rs medsrv5 Online Online
Resource: DB1-aaa-rs medsrv6 Offline Offline
Resource: aaa-lh-rs medsrv5 Online Online - LogicalHostname online.
Resource: aaa-lh-rs medsrv6 Offline Offline - LogicalHostname offline.
Resource: aaa-srv-rs medsrv5 Online Unknown - Monitor stopped due to setup error or custom action.
Resource: aaa-srv-rs medsrv6 Offline Offline
Resource: aaa-lsnr-rs medsrv5 Online Online
Resource: aaa-lsnr-rs medsrv6 Offline Offlinei check the /var/adm/message log and find out fallowing message
Jun 19 14:07:27 medsrv5 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource sas-srv-rs status on node medsrv5 change to R_FM_UNKNOWN
Jun 19 14:07:27 medsrv5 SC[SUNWscor.oracle_server.monitor]:sas-rg:sas-srv-rs: [ID 564643 local7.error] Fault monitor detected error DBMS_ERROR: 1017 DEFAULT Action=STOP : Please correct login information in HA-DBMS Oracle database configuration
Jun 19 14:07:27 medsrv5 SC[SUNWscor.oracle_server.monitor]:sas-rg:sas-srv-rs: [ID 780539 local7.error] Stopping fault monitor: DBMS_ERROR:1017:Please correct login information in HA-DBMS Oracle database configuration
Jun 19 14:07:27 medsrv5 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource sas-srv-rs status msg on node medsrv5 change to <Monitor stopped due to setup error or custom action.>
Jun 19 14:07:27 medsrv5 SC[SUNWscor.oracle_server.monitor]:sas-rg:sas-srv-rs: [ID 796592 local7.error] Monitor stopped due to setup error or custom action.
and then i notice that i am using "sqlplus '/ as sysdba'" as Connect_strings, that is why i can start/stop the database but not able to monitor the database, for that i need to create an oracle account as it mentioned in "sun cluster data service for HA-Oracle" like
# sqlplus �/as sysdba�
grant connect, resource to user identified by passwd;
alter user user default tablespace system quota 1m on
system;
grant select on v_$sysstat to user;
grant create session to user;
grant create table to user;
exit;
i would appriciate your update if i m doing some thing wrong here
thanks -
Could not install custom actions error
heres the users info
running windows 7 pro 32bit oem
office standard 2013
visio 2013
adobe pro X
CRM 2011
using exchange 2010
we the user click on a message in outlook left or right click the error
Outlook is crashing giving this error: "could not install custom actions is displayed"
which then crashes outlook:
This error shows in event log:
Faulting application name: OUTLOOK.EXE, version: 15.0.4551.1004, time stamp: 0x5253ad6f
Faulting module name: OUTLOOK.EXE, version: 15.0.4551.1004, time stamp: 0x5253ad6f
Exception code: 0xc0000005
Fault offset: 0x004f1d25
Faulting process id: 0x25c
Faulting application start time: 0x01cefcd257c1e5fa
Faulting application path: C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
Faulting module path: C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
Report Id: a3d5969e-68c5-11e3-a4c5-7845c40b5bf7
I have found issues relating to this issue and voting buttons, we do not use them.
now the weird part, when logging into OWA, the message shows as corrupted and displays this error:
Exception
Exception type: Microsoft.Exchange.Data.Storage.CorruptDataException
Exception message: The voting data was corrupt.
Call stack
Microsoft.Exchange.Data.Storage.VotingInfo.Read(BinaryReader reader)
Microsoft.Exchange.Data.Storage.VotingInfo..ctor(MessageItem messageItem)
Microsoft.Exchange.Data.Storage.MessageItem.get_VotingInfo()
Microsoft.Exchange.Clients.Owa.Premium.RenderingUtilities.RenderVotingInfobarMessages(MessageItem message, Infobar infobar, UserContext userContext)
Microsoft.Exchange.Clients.Owa.Premium.ReadMessage.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
when the same user logs into OWA lite version the message displays fine.
I have tried removing/reinstalling outlook/office/crm/ ect
I have setup a whole new pc, still happens
I even installed outlook 2007 to see if it would happen and it did, im at wits ends, and I cannot put crm back on the users pc until I rule out it.
I have tried repairing the exchange mailbox and no corruptions were detected.
any ideas that can point we in the right direction would be appreciated.
thanks for your timeHi,
According to your description and the error message, the issue seems more related to the Exchange user account. Because you had re-build a client environment and check the voting buttons.
I noticed that if you logged into OWA it was corrupted, and it worked well in OWA lite version. A lot of feature were available in OWA lite version. Such as, Reading Pane, Share a calendar, Public Folders, etc. I suppose that the issue also may be caused some
custom forms loading.
Following this, I recommend you create a new user account in Exchange, then try to disable and open the feature one by one to test.
Here is the feature list:
http://blogs.technet.com/b/ilvancri/archive/2010/04/07/exchange-2010-owa-versus-owa-light.aspx
Reading Pane: Click View > Reading Pane, and then Right or Bottom.
http://office.microsoft.com/en-us/outlook-help/turn-the-reading-pane-on-and-off-HA102830304.aspx
Share a calendar: Use command to turn off it in Exchange server.
Regards,
George Zhao
TechNet Community Support -
Error in writing custom action
Hi
I wanted to create a new action, so I read "Writing Custom Actions" section in JHeadstart Developer's Guide.
As mentioned in the Developer's Guide, I chose JhsAction as super class and extended a new class called GenerateChart and overrode validateProperties and execute methods.
I wrote a new method in my action class called getData() to retrieve information from model to use in execute method.
here is its specification :
private void getData (SessionData sessionData, JhsActionMapping mapping)
Then as mentioned in the developer's guide (page 2-38) I got the sesion id and passed it to getHandler method.
// retrieve Session Id from SessionData
Object sessionId = sessionData.getSessionId();
// Get the DataObject handler
DataObjectHandler handler =
(DataObjectHandler)getHandler("myClass", sessionId);
Surprisingly, I received following compilation error :
Error(48,26): method getHandler(java.lang.String, java.lang.Object) not found in class com.behincara.controller.struts.action.GenerateChart
I read getDataObject and getDataObjectSet sources and realized that they use getHandler with sessionData instead of sessionId.
Is it a mistake in Developer's Guide?
Then I changed the code to the following
// retrieve Session Id from SessionData
Object sessionId = sessionData.getSessionId();
// Get the DataObject handler
DataObjectHandler handler =
(DataObjectHandler) getHandler("myClass", sessionData);
and I received another error
Error(48,36): unreported exception: java.lang.Exception; must be caught or declared to be thrown
Then I copied these lines to execute method and surprisingly I received no error.
Where is my mistake?
Could anybody help me?Hi Navid,
You wrote:
I read getDataObject and getDataObjectSet sources and
realized that they use getHandler with sessionData
instead of sessionId.
Is it a mistake in Developer's Guide? You are right, it is a mistake in the Developer's Guide. I have logged a doc bug for it, so we can correct it in a future version.
A more reliable source for this kind of information is the JHeadstart JavaDoc, which you can find at J:\jheadstart\doc\api\index.html (where J: is the JHeadstart home). If you look up JhsAction there, you will find detailed information about the methods you can use in your custom actions.
... I received another error
Error(48,36): unreported exception:
java.lang.Exception; must be caught or declared to be
thrown
Then I copied these lines to execute method and
surprisingly I received no error.
Where is my mistake?Your mistake is that your method getData does not throw an Exception, and the execute method does. If you change the signature of getData to be as follows:
private void getData (SessionData sessionData, JhsActionMapping mapping)
throws Exception
(add the last two words), then you can also put the getHandler lines in getData.
Hope this helps,
Sandra Muller
JHeadstart Team -
An error occurred while executing a custom action:_CreateMOMRegKey
It occurs during the "Configuring Reporting" portion of the install. This is an install using an existing database and the error seems to occur as it is trying to access that database during the Reporting portion of the install. I have included
the portion of the log file where it fails to speed things along. I have looked at all of the advice on the forums and I am completely lost at this point.
"MSI (s) (3C:3C) [10:34:28:882]: NOTE: custom action _CreateMOMRegKey unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _CreateMOMRegKey returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (3C:4C) [10:34:28:964]: User policy value 'DisableRollback' is 0
MSI (s) (3C:4C) [10:34:28:964]: Machine policy value 'DisableRollback' is 0
Action ended 10:34:28: InstallFinalize. Return value 3.Validate that the installation account and SSRS account defined during the installer has access to the location where the Report Server Database is stored. Also recommend deleting the keys below for the failed installation.
HKLM\Software\Microsoft\Microsoft Operations Manager
and
HKLM\Software\Microsoft\System Center
Systems Engineer -
Hi,
I am uploading the customers and I am getting the error on RA_CUSTOMERS_INTERFACLE_ALL.
INTERFACE_STATUS: a1,
Error Description from Metalink Note ID: 1073634.6
A1 --> The customer reference for update does not exist in RA_CUSTOMERS
What does this mean?
Regards,
Waqas HassanI am using following script and I am getting error:
error in "ra_customers_interface_all" table, interface_status = a1,
-- ra_customers_interface_all
INSERT INTO ra_customers_interface_all (orig_system_customer_ref,
orig_system_address_ref,
orig_system_party_ref,
insert_update_flag,
site_use_code,
primary_site_use_flag,
customer_name,
location,
--customer_number,
customer_status,
country,
city,
address1,
last_updated_by,
last_update_date,
created_by,
creation_date,
org_id)
VALUES (h1.orig_system_customer_ref,
h1.orig_system_address_ref,
h1.orig_system_customer_ref,
'I',
'BILL_TO',
'Y',
TRIM (h1.customer_name),
'RIYADH',
--h1.customer_number,
'A',
l_territory_code,
h1.city,
TRIM (h1.address1),
1151,
SYSDATE,
1151,
SYSDATE,
l_org_id);
error in "ra_customer_profiles_int_all" table, interface_status = b1,a1,
--ra_customer_profiles_int_all
INSERT INTO ra_customer_profiles_int_all (insert_update_flag,
orig_system_customer_ref,
ORIG_SYSTEM_ADDRESS_REF,
customer_profile_class_name,
standard_term_name,
credit_hold,
overall_credit_limit,
currency_code,
last_updated_by,
last_update_date,
created_by,
creation_date,
org_id)
VALUES ('I',
h1.orig_system_customer_ref,
h1.orig_system_address_ref,
'DEFAULT',
h1.standard_term_name,
'N',
NVL (h1.overall_credit_limit, 0),
'SAR',
1151,
SYSDATE,
1151,
SYSDATE,
l_org_id);
I have followed this note CUSTOMER INTERFACE STATUS ERROR CODES [ID 1073634.6] to get the error meanings.
A1 --> The customer reference for update does not exist in RA_CUSTOMERS
B1 --> ORIG_SYSTEM_ADDRESS_REF is mandatory when specifying an address
I am giving this value ORIG_SYSTEM_ADDRESS_REF and still B1 error is occurring.
and I do not understand the error code A1,
Please guide me, How could I resolve these errors? -
Novice , need help with upload error
My original hosting company went south and not all my files
were backed up..., but one application i'm having trouble with on
the new server and I can't identifing the cause of the error.. this
is the error.. don't know if i'm missing a script or something else
Note: It uploads the primary images but fails to write a path
or upload the thumb images...
Please helpppppppppp
and this is the code ...I have been using..
<!--- <cffile
destination="#trim(APPLICATION.config.pathtoimage)#"
action="upload" nameconflict="makeunique" filefield="photo"
accept="image/*" attributes="archive"> --->
<cfif form.photo1 NEQ "" OR form.photo2 NEQ "" OR
form.photo3 NEQ "" OR form.photo4 NEQ ""></cfif>
<!--- new file upload process for multiple file uploads
--->
<cfif isDefined("Form.Photo")>
<cfif CGI.HTTP_HOST EQ "192.168.1.103:88">
<cfset uploaddir =
"C:\Websites\121899ba6\properties\upload\">
<cfset thumbdir =
"C:\Websites\121899ba6\properties\upload\thumbnails\">
<cfelse>
<cfset uploaddir =
#trim(APPLICATION.config.pathtoimage)#>
<cfset thumbdir = #trim(APPLICATION.config.pathtoimage)#
& "thumbnails\">
</cfif>
<cf_FileUpload
directory="#uploaddir#"
weight="100,100,100,100,100,100,100,100"
nameofimages="photo1,photo2,photo3,photo4,photo5,photo6,photo7,photo8"
nameConflict="overwrite"
accept="image/*"
default="na">
<!--- <cf_FileUpload
directory="#curDirectory#"
weight="5,3"
nameofimages="image,image2"
nameConflict="overwrite"
accept="image/gif"
default="na"> --->
<cfif request.filesaved eq "Yes">
<!--- cleanup result list --->
<cfset tmpCount = 0>
<cfset tmpNewList = "">
<cfloop list="#request.result#" index="currImage">
<cfset tmpCount = IncrementValue(tmpCount)>
<cfif ListGetAt(request.result, tmpCount) neq "na">
<cfset tmpNewList = ListAppend(tmpNewList, currImage)>
</cfif>
</cfloop>
<cfset photolist = ListAppend(form.photo,tmpNewList)>
<cfquery datasource="#request.dsn#"
username="#request.user#" password="#request.pass#"
name="updatebook">
update adinfo
set
photo = '#photolist#'
where adinfoid = #trim(val(form.adinfoid))#
</cfquery>
<!--- create the thumbnails now --->
<cfloop list="#tmpnewlist#" index="currImage">
<CFX_IMAGE ACTION="RESIZE"
FILE="#uploaddir##currImage#"
OUTPUT="#thumbdir##currImage#"
QUALITY="100"
WIDTH="100">
</cfloop>
<!--- if the image file was not saved --->
<cfelse>
<CFINCLUDE template="skeleton.cfm">first thing that comes to mind: custom tag not
installed/mapped to.
make sure the custom tag cf_FileUpload is installed on your
new host or
that the new host has set up cutom tag mapping to the folder
in your
site where this custom tag is located.
second: you have a hard-coded IP address in there - make sure
it is
valid in your current hosting environment
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com -
Changing action name of sample custom action block in MII 12.2
Hi all,
I have a problem changing the action name of the custom action block sample. I've changed the content and successfully implemented the action block. But when I changed the action name and uploaded again, the action block cannot display any input parameters and output parameters. In the java console, I can see 3 rows of "Shared Properties Error: No File Defined" error. Can I get a hand on resolving this issue? Thanks.
The From rows are the sample code. To row is what I changed to.
In SimpleActions.java
From:
@Action(name = "AddTwoNumbers", referenceDocumentGenerator = ReferenceDocumentGenSample.class)
To:
@Action(name = "GBarcode", referenceDocumentGenerator = ReferenceDocumentGenSample.class)
From:
public static void addTwoNumbers(
To:
public static void gBarcode(
In catalog.xml
From:
Component Type="Action"
Name="AddTwoNumbers"
To:
Component Type="Action"
Name="GBarcode"
All other code remains the same.
Best regards,
LawrenceHi Lawrence
Did you remember to change the action name in the catalog xml as well? In the catalog xml the Name field denotes the name of the action. This needs to also change in case the Action Name is changed in the class.
Please check this and change if not already done.
Regards
Partha
Maybe you are looking for
-
Hope this is the right place to ask. I am having trouble embedding a SWF file that I created into my blog page. I tried to upload it to sites.google.com but the direct link to the SWF file is hidden behind an https:// that I can't get rid of and oth
-
Error: Injection on field eManager of instance EmployeeServicesBean failed
Hi all, I have access to the customers NW CE 7.1 SP07 and of course I am using the corresponding NWDS 7.1 SP07 that comes with this CE installation. I am trying to study JEE 5 @ SAP and I have created a very simple Application (from the Book http://w
-
Hello, I use Arch Linux i686, and when I try to plug in my 4GB Sansa Fuze, it fails to be detected by Linux as a USB mass storage device, even when in MSC mode. Does anyone know how to fix this problem? Here is my dmesg | tail output: usb 3-1: device
-
Linked server issue using SQLNCLI versions on SQL 2008 & 2014
Hi all, Our product creates databases on a sql server 2008 instance and creates linked servers between them to use distributed queries. This looks like: "EXEC sp_addlinkedserver 'linkDatabaseA', '', 'SQLNCLI10', '.', NULL, NULL, 'DatabaseA'"". Distri
-
Unable to choose foreign key when creating reference partition
Hello I have 2 foreign keys on a table. I am trying to choose the 2nd foreign key when creating a reference partition. I am unable to select the required foreign key. The model has Table A -> Table B -> Table C. Table A has a list partition. Table B