Custom Adapter - No content in Communication channel Monitoring for JCA

HI,
     We have developed a Custom Adapter for our client in XI with name JCA and it is working absolutely fine.
     Issue: We are not getting any entries in Communication Channel Monitoring for success or Error Messages.
     We have used Audit log for success or Failure entries and they are coming fine in Messaging System but there coule be a standard way to get entries in Channel Monitoring.
    Our client needs the entries in CC monitoring instead of Customised Audit Logs.
    Please help.
REgards,
Anurag Garg

HI Satish,
                 Thanks for answer. I am looking for this in Custom Adpater not in adapter module.
                 This log creates a trace File . Its not to do with getting messages in CC monitoring as we do get for File Adapter or other Adapters.
               Like- Message Successfully put into the queue.
                     - Successfully processed.
                 Such Messages are there in sample_ra. jar file code but they are not visible in CC Monitoring.
               I think some extra code needs to be added to activate this in Monitoring.
               Please suggest.
REgards,
Anurag Garg

Similar Messages

Communication Channel Monitor status using UDF

I am writing a UDF to get the JMS adapter type status from "communication channel monitor"..
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey dkey = DynamicConfigurationKey.create(
"http://sap.com/xi/XI/System/JMS", "DCJMSCorreleationID" );
From here I don't how to get the status of JMS communication channel status, cluster node status and also the processing details..
I am also thinking, is there any I can get the JMS payload and parse it to get the required elements..
I badly need ur suggestion..
Thanks-GS

Hello Sreeram ,
Thanks for the Reply.I am working on PI 7.0 SP06 in a SAP Note I have read that
it is from PI 7.0 SP8 i think because of the lower SP level iam not getting the
Communication Channel Monitor displayed.
Note 1000528 - FAQ: XI 3.0 / PI 7.0 Adapter and Channel Monitoring
Regards
Prasad
Message was edited by:
prasad chintala

Communication channel monitoring, adapter monitoring error

Hi ,
I am using SAP PI 7.0 with HP-UX.
Here we have 6 logical hosts in one physical host.
Physical host name is u2013 xyz
Integration server name u2013 sappid
The Central SLD: sappid
URL for sappid: sappid: 50300
When I monitoring RWB----
>communication channel monitoring, adapter monitoring, in Development system It's detecting another logical host ( like www://sapard:50300 ) and getting page cannot find error.
1.SLDCHECK
   http://xyz:50300/sld
   host name: xyz
port number: 50300
user : SLDDSUSER
2.SXMB_IFR
   http://xyz:50300/rep/start/index.jsp
3.SMICM
   icm/server_port_0 = PROT=HTTP,PORT=8003
   icm/server_port_1 = PROT=SMTP,PORT=0
   icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
   icm/host_name_full = sappid
4. SLDAPICUST
    SAP_CONFIG   1   xyz   50300   SLDDSUSER
5. SXMB_ADMIN
    Role of Business System Integration Server
    Corresponding Integ. Server http://sappid:8003/sap/xi/engine?type=entry
   Integration Engine Configuration Data -> Check button
6.When I opened the http://xyz:50300/rep/start/index.jsp I got the
XI start page.
    when I opened the http://sappid.AIG.com:50300/
   the page not found issue, when I opened http://sappid:50300/ I got the
   XI start page.
plz help me for this issue.
thanks in advance.
regards,
reddy.

Hello,
I think the FQDN is not set properly.
Problem in the parameter
SMICM
icm/server_port_0 = PROT=HTTP,PORT=8003
icm/server_port_1 = PROT=SMTP,PORT=0
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
*icm/host_name_full = sappid *
Replace this parameter in instance profile
icm/host_name_full = sappid.AIG.com
Then in the host entry of your server please add an entry
172.18.23.233(ip your ur Xi server)       sappid.AIG.com
Then let us know the result.
Thanks and Regards
Vijay

Communication channel monitoring (adapter engine) in ccms (rz20) available?

Hi,
we have problems in our xi system (PI 7.0, SPS10). The adapter engine can only be monitored in the communication channel monitoring, available in the runtime workbench!
There sometimes errors disappear. At the moment these errors accumulate!
Is it possible to view these errors/ alerts in the ccms (rz20) monitoring?
So we don't look all the time in the communication channel monitoring!
Have anybody an idea?
Regards,
matthias isenburg

Have u seen the discussion
Re: How do I configure an auto-email alert for Adapter engine errors
Regards,
Prateek

Unable to see audit log in Adapter Engine (Communication channel monitoring

Hi
I am unable to see audit log in Adapter Engine (Communication channel monitoring).
Could please suggest what parameter to set to display in PI 7.0 visual administrator.

/people/kenny.scott/blog/2009/03/08/pi-71-af-messaging-system-audit-log-persistence
Did you tried this paramter even though the above is applicable for PI 7.1
Rajesh

Communication Channel Monitoring Error

Hi...Experts,
we r doing RFC-SOAP scenario with out using WSDL file,
sender Communication Channel Monitoring getting error like this
Error in processing caused by: com.sap.aii.af.mp.module.ModuleException: call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden
In the Receiver Communication Channel Monitoring, getting error like this.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden.
how can i rectify these errors, pls suggest me..
regards,
Pasi.

Hello Pasi,
Error: HTTP 403 Forbidden
Description: The server understood the request, but is refusing to fulfill it
Possible Tips:
Path sap/xi/engine not active
HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
Because of Inactive Services in ICF Go to SICF transaction and activate the services. Refer SAP Note -517484
Error in RWB/Message Monitoring- because of J2EE roles Refer SAP Note -796726
Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. Because of the URL is incorrect or the adapter is not correctly deployed.
Go through Micheal's Blog..
XI: Timeouts
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Thanks,
Satya Kumar

Capturing the communication channel monitoring error into an alert.

Hi,
The following is my scenario:
File adapter polls using file content conversion,if the source file is not in a proper format the file wont be picked up and communication channel will show error in channel monitoring.
I have to configure an alert for the same.
Can i capture the error message shown in communication channel monitoring and raise alert?
Many Thanks,
Pritish

refer todays thread on the same issue;
FILE ADAPTER ISSUE

XI communication channel missing in communication channel monitoring

Hello partners,
I have a problem with communication channel monitoring.
I have defined a communication channel of Adapter Type = "XI" in the integration directory.
I have also sent messages successfully via this communication channel.
But the communication does not appear in the list of available channels in the selection list of the communication channel monitoring.
Can someone tell me how I can get monitoring info of an "XI" communication channel?

Hi,
From SP17, you have a new feature
http://help.sap.com/saphelp_nw04/helpdata/en/44/46d1a56faf52d3e10000000a1553f6/content.htm
The Runtime Workbench has the following new functions:
● Component monitoring: Communication channel monitor
In component monitoring, you can use the new communication channel monitor to call information about the status of your communication channels and the corresponding adapters. You can also administrate your communication channels.
Unlike the adapter monitor, the communication channel monitor also provides current runtime information about the communication channels of individual adapters, as long as they are registered for communication channel monitoring.
To monitor adapters that do not provide runtime information to communication channel monitoring, continue to use the adapter monitor.
Regards,
Bhavesh

Advance selection for source file-Error in communication channel monitoring

Hi all,
Referring to the link below:
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
I have developed my scenario in the same way.But due to the values <NOTHING>
in Mandatory fields Source Directory and Filename,i am facing problem in Communication Channel Monitoring as it shows an error;even though the end-to-end scenario works successfully.
Plase note that our scenario is not to exclude the particular file but to pick the files serially after a certain delay.
Kindly provide some idea about how can we remove the error from Communication Channel Monitoring.
Thanks & Regards,
Sudhir Tiwari

Sudhir,
In the sender file adapter, you have an option called "Processing Sequence".
By selecting ByName or ByDate you can make files get selected sequentially either ByName ( alphabetically ) or by the creation time stamp of the file.
In the sender file adapter also make the QOS as EOIO and give the QueueName as any value and the files will be processed sequentially.
Regards
Bhavesh

Error in Communication Channel Monitoring

Dear All Experts ,
we are getting the below error message while posting the transaction in the communication channel monitoring. Pls advise to resolve the same.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIServer/UNKNOWN/ADAPTER.JAVA_EXCEPTION - com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=ae1e4075a0063170895328ec6f70c70d; at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBindingByChannelId(AbstractLookupManager.java:173) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:431) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81) at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:461) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:243) at com.sap.e
Regards
Machindra Patde

Hi Machindra,
Check if the channel name specified in sender/receive agreement is correct.
If yes then delete the particular channel and create new one and specify that one in the agreement.

Communication Channel monitoring in PI 7.1

Hi Folks,
How to do the adapter monitering & Communication channel monitoring in teh sap PI 7.1.
Regards,
Santosh

Hi,
Have you searched in SDN,??
there is no difference compare to other versions
RWB-->ComponentMonitoring>Adapter Engine->Communication channel monitoring--->select communication Channel.fileter,then monitor it.
Regards,
Raj

Activating Communication Channel Monitor in PI 7.0

Hello all,
Can anyone tell me Detail steps involved in Activating Communication Channel Monitor I have tried assigning my User with following roles
A user needs the following role to query the status of communication channels:
● xi_af_channel_admin_display
A user needs the following role to start or stop communication channels:
● xi_af_channel_admin_modify
Is it correct ?
What are steps ?
regards
Prasad

Hello Sreeram ,
Thanks for the Reply.I am working on PI 7.0 SP06 in a SAP Note I have read that
it is from PI 7.0 SP8 i think because of the lower SP level iam not getting the
Communication Channel Monitor displayed.
Note 1000528 - FAQ: XI 3.0 / PI 7.0 Adapter and Channel Monitoring
Regards
Prasad
Message was edited by:
 prasad chintala

Communication Channel Monitoring not showing up Communication Channels

Hi All,
PI 7.1 : I have created Communication Channel using File Adapter in ID and activated it. Adapter engine is Central Adapter Engine. But in Runtime Workbench I am not able to see communication channels created under Component Monitoring -> Adapter Engine -> Communication channel Monitoring. Please let me know what is the problem.
And in ID I am getting below warning message for that Communication Channel.
Message: Unable to Check Whether Communication Channel is compatible with selected Adapter Engine since version information for Adapter Engine is missing in SLD.
Any idea? I appreciate your quick help.
Thanks,
Carl

Hi Abhishek,
I have selected inID , File dapater software component SAP BASIS 7.11 name space http://sap.com/xi/XI/System, adapter "file " is in that name space in ESR. In ESR there is only one BASIS Software Component SAP BASIS 7.11.
Thanks,
Carl

Communication channel monitoring did not record the processing detail

Hi,
I have a proxy-to-file scenario. Usually, I can see the processing details for the receiving file communication channel in Communication channel monitoring with the Message ID and Explanation. And if I click the Message ID, it will give me processing steps in Audit Log. However, I don't see this log for last night's run. In SXMB_MONI, it shows me 2 messages were successfully sent out. The second message should be appended to the first message in receiver file. But the receiver side only got the first message data. Is there any way I can find out why the second message did not reach to the receiver?
Thanks in advanced!
Meiying

Hi
Try opening directly
tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
http://<host>:<port>/mdt/channelmonitorservlet
You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
also refer
No "Adapter monitoring" in runtime workbench

Channels not monitorable in the Communication Channel Monitor / RWB

Hi,
Back on XI after a long break ☺
I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
Status: NA
Short Log: No adapter registered for this channel
The adapter is deployed and the integration scenarios using it work perfectly:
- sda package deployed through the SDM
- the metadata defined in the Design
- a valid and working configuration involving the scenario is defined
The messages are going through and are monitorable in both SXMB_MONI and RWB...
All other channels using system adapters (File, RFC, SOAP) do display a status (as a color icon) and a Short Log and they can be administered (start/stop) using the enabled buttons when selected
From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
I have no idea what could be the issue should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
I saw 2 posts with this error message but they did not help me to figure out where the issue is
Thanks for your help,
Adalbert
Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

Hi Gouri,
Thanks for your response, I will try would suggestion for testing... but
I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
I did not see anything in the Adapter Development guides related to this kind of constraints...
Thanks,
Adalbert

Custom Adapter - No content in Communication channel Monitoring for JCA

Similar Messages

Maybe you are looking for