Custom Attribute in OIM user Form is not populated.

Hi Friends,
I am new to this Identity Manager Technology. I really all ur support.
I am using oracle Identity Manager 9.1.0.2 version with JBoss server. The Target System is Sun One directory.
1. I added the custom field street in Resource Object--Object Reconciliation Tab for Xellerate User and also for Iplanet Users objects.
2. In Process definition, for iplanet user provisioning Process and Xellerate Users provisioning process, in Reconciliation Field Mappings. I mapped the street field to the UDF(street) and also for UD_iplanet_Street .
3. When I run the task schedular for Iplanet User Recon, the string associated with the field in Iplanet is reflecting in resource profile of the user view/Edit. However, it is not populated in OIM User Form Field.
Can you please help me in resolving the issue. I will provide any further needed information.
Thanks and Regards,
Manjula

Thank you for your prompt reply.
Yes. I tested it.. I can see the street field in the process form is populated with the string. However, I cannot see the same in the OIM User Profile Form. That Means, When I go to User folder in Admin and User Console, Manage Users and then select the user associated with the street field, the street field for the user is not populating and is empty without any string.
Please clarify me.
Thanks and Regards,
Manjula.

Similar Messages

Updating AD Attributes via OIM user forms

Hi,
I have configured an AD connector. Firstly, I did a trusted recon to create the OIM. Next, I did a user recon to link the AD user to the OIM user. After that I have configured to pre-populate to show the AD attributes onto the OIM user form.
Now, what I want to do is to update the AD attributes (eg. Mobile) in the OIM web interface, and has it reflect back to AD.
Appreciate a detail description as I am very new to OIM.
Cheers, SK

You may want to try this:
a. Add an entry in Lookup.USR_PROCESS_TRIGGERS
b. Add a Process Form field and a Process task in each Process where you want to push the value.
The task should have a name "<UDF label> Updated"
c. Create another one called "Change <UDF label>"
d. Make the tasks conditional, "allow multiple instances"
e. Wire the "Change <UDF label>" to copy values from the user profile to the process form
f. Wire the "<UDF Label> Updated" to the connector adapter.
--Deepak

Custom attributes added to user objects not visible in OWA address book

Hi,
I am using Exchange 2013 and recently added a new custom attribute in the user object properties using the details template editor to be visible in the GAL The new attribute is correctly getting displayed in the GAL from outlook clients but not visible
in OWA address book. Is there a way to update the display of user objects in OWA address book to include the new custom attribute?
Thanks!

Hi Abu,
Please see following link:
Customize Details Templates
http://technet.microsoft.com/en-us/library/ms.exch.toolbox.detailstemplate(v=exchg.150).aspx
It says, Use the Details Templates Editor to customize the client-side graphical user interface (GUI) presentation of object properties that are accessed by using address lists in Microsoft Outlook.
My understanding is this setting only visible in Outlook.
Please correct me if there is any misunderstanding.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Multi Value User Defined field on OIM user form

Hi Everyone,
I have a requirement where i need to assign multiple resources to user as per access policy. These resources should be assign by virtue of some role (custom attribute as of now). The specific requirement is that one user may have multiple roles (and hence resources) and all these values should capture in any user defined field. As the requirement contains multiple Roles so we have to create multi-value user defined field for User form to capture all these role values under single attribute. Does OIM provides any such multi-value field OOTB (lookup, drop down--any customize way we can make them multivalue)?

He's right. Multi Valued attributes on the User Profile are not available in OIM. If you want to do this, and you have a finite number of possible roles, you can create UDFs for each and map a checkbox or something to it if the user has that value. Then base your acccess policies off those.
-Kevin

How to Populate Database values in OIM user form

Hi friends,
I have created some groups in OIM and I have created a new field in OIM user form. Now i want the group values visible as new field values.
How the database table values can be made visible in OIM field ..?
please help me in doing it
Regards
sri

Just follow this document and from fig 13 select LOV type as query.
http://docs.oracle.com/cd/E21764_01/doc.1111/e14308/conf_mangmnt.htm
Regards
Shashank

Error message - attributes of the user inconsistent or not defined

Hi,
We are in SRM 7.0 have created new plant and some users assigned to this plant.
However when logged into portal page, it gives the error message ' Attributes of the user inconsistent or not defined' see PPOMA_BBP.
When checked in the org structure the data entered are correct.
What could be the reason for this error message.
Rgds,
Madhan

Hi,
Please check the following in the org structure in PPOMA_BBP for the users
1. Check whether the attribute for the ITS --URL is given.
2.Check the attribute for the company code is given.
3.Check whether the Roles for the users is given
in addition go to the check tab and check if any Red mark are there.
correct those attribute.
The error is basically related to the PPOMA_BBP only
Regards
G.Ganesh Kumar

User details are not populating in access request

Hello All,
We have configured GRC 10 with LDAP and we are able to search the users in LDAP tcode(find option) and in the access request. But when i select the user and click on ok in the access request, user information is not populating to user details tab. I have followed the SAP Standard doc and configuration is fine. When i select data source as SAP system, user details are population as expected. But when i use LDAP as data source, i am having the issue. I hope this is an field mapping issue but i tried all different options but no solution i found. Kindly help me with your expert suggestions.
Field mapping is as follows:
LASTNAME
SN
FIRSTNAME
GIVENNAME
USERID
SAMACCOUNTNAME
ROLE_NAME
NAME
MEMBER_OF
MEMBEROF
EMAIL
MAIL
MANAGERID
MANAGER
Regards,
Jai Reddy.

I know the path, but how to check it? is it using metaverse search?
Look at the Runs. Are they succeeding, or failing to connect?
Remove the Bit 17 and try again.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Hiding Password in OIM user form

Hi All,
I am trying to Hide the userID and Password from OIM user (create user) form as I am using entity adaptor to generate these and I dont want to enter vague values. I am successful in hiding User ID field by modifying formMetaData.xml, however, I am not able to find anything for Password/Confirm Password fields.
Please suggest.

For each attribute reference, you can specify whether the field is:
Viewable—By adding the attribute reference to the relevant section
Editable—By specifying a value of TRUE or FALSE for the editable parameter
Optional—By specifying a value of TRUE or FALSE for the optional parameter

Adding custom attributes in iPlanet User resource

I have a custom attribute in LDAP called "CustomAttr1" created. I would like to add this attributes into iPlanet User RO so that I can update that attribute via OIM. What is the process of adding that attribute to the iPlanet User process and forms?

Have you checked the Connector Document and specifically the section where it says "Extending the Connector"?
This: http://docs.oracle.com/cd/E11223_01/doc.904/e10446/custom.htm#CDEGCCEB
-Bikash

Custom Attributes in Target Group Email Campaign Not Refreshed

We have a campaign sending emails to a target group of BPs. To fill our custom attributes with values we have implemented our code in badi CRM_IM_ADD_DATA_BADI method CRM_IM_BPSELE. We tested our code using the Test Send feature from the email form and all worked fine.
But when we ran the campaign in the background for a Target Group with multiple BPs it would not work correctly, our attribute values were incorrect.
We discovered while debugging the job, that the badi gets run once for each BP, but the attribute values from the previous BP do NOT get refreshed. In fact there are 2 entire sets of attribute records in the CT_ATT_VALUES table parameter. Each time through it multiplies by another set of our attributes.
I have put code in the badi as a workaround that deletes the previously filled attributes for the previous BP, but I'd like to figure out what is causing this problem.
Any help would be appreciated.
thanks,
Lee

Hi Lee,
Is this issue resolved for you now??
I am facing the similar problem.
Though the BADi is not used for these two mails (it is used in some other mail forms), it is actually called in 'CRM_ERMS_MAIL_COMPOSE' Function Module and the process is same as u said. There are 2 sets of values.
I am using a Mail Alert functionality where in a 'Mail Alert ON' is sent to field engineers (FE) and then upon FE accepting the work we will send a 'Mail Alert OFF' to FEs.
Problem is, we get one or two fields data incorrectly sometimes. I am not able to find out the root cause yet.
Please let me know if you have had any resolution to this!
Thanks in advance.
Chaitanya

Adding custom action to Tabbed User Form

I am trying to view and delete user tasks (such as deferred task) from a user view (tabbed user form). I am able to list the tasks in a separate tab, however, I would like to be able to delete the task using a manual action. I added a button, however, the clicking on the button refreshes the page, and does not get into the Update User workflow.
Wanted to check with the forum members if anyone has added any custom action via the TabbedUserForm where the button (or something) will submit the form for change of user view to the Update User workflow.
Or, if someone has a simpler way - manual action to cancel/delete a deferred task for a user.
Thanks in advance for any insight.
Indrajit
Edited by: indrajitg on Sep 14, 2007 12:43 PM

It seems I was initially too focused on the VCS API itself, as I was under the impression that the context menu would be exposed through a manager (similar to the Editor API). But it turns out that the view API provides very nice access to the relevant bits and I was able to achieve the desired result by simple listening to view activation and access the context menu from there. It's not ideal as I have to deal with view ids directly, but it works - good enough.

Mandatory Attributes in Create User Form

Hi All
i want to make the mandatory fields in create user form (ie Organization name) as optional.
For this i edited the FormMetada.xml file by making optional as true. (in the attribute reference for Organization field in User management section), as mentioned in the docs.
Now when i try creating user, it shows me 'You do not have permissions to perform this operation' error.
while when i give some value in the organization field, then it creates the user.
please provide some pointers in this regard.
Thanks.

You MUST provide an organizatation name. There is a system entity adapter on the Users data object. You cannot avoid populating this.
-Kevin

How to Add custome attribute value of user id

Hi my friend.
from below cmd i can able to view the current attribute value. but i wanted to modify the value. so can you please provide dsmod cmd for modify
dsquery * domainroot -filter "&(objectCategory=person)(objectClass=user)(sAMAccountName=username)" -attr extensionattribute2
Dsmod ...................?
James
8892722073

Hi James,
As you said, the command Dsmod user can be used to modify attributes of one or more existing users in the directory. However, this command could not be used to modify the custom attribute, its syntax has been set.
You can use builted in Active Directory Attribute Editor to modify a user's attribute:
Open Active Directory Users and Computers.
Locate the User container, and then find the user which you want to modify.
Right-click the user, click Properties, and then click the tab
Attribute Editor.
Slect the attribute which you want to modify, click Edit, modify the value, and then
click OK to save the change.
For your information, please refer to the following figure:
What's more, please refer to the following article to learn to use the PowerShell AD Provider to Modify User Attributes
Use the PowerShell AD Provider to Modify User Attributes
http://blogs.technet.com/b/heyscriptingguy/archive/2013/03/21/use-the-powershell-ad-provider-to-modify-user-attributes.aspx
Regards,
Lany Zhang

User Forms are not displaying in SAP B1 2005

Hi,
I have created an application using SAP B1 2004. All user forms are displaying properly in SAP B1 2004. But when I am trying to run the same application in SAP B1 2005, It is unable to display some of the User Forms.
Can any body help me for the same?
Thanks.
Archana.

Hi Archana,
Are you using some special items in your form?
You say the form is not displayed, do you have a return error or exception when trying to open it in debug mode?
In Debug mode please pay attention to the VS.NET configuration, you have in Debug Menu -> Exceptions to configure all types of exception to throw into the debugger. Sometimes the COM exception are not thrown and your code just jumps after the error to the end of your method...
Have you tried to open the xml of your form with the ScreenPainter to see if everything is correct in there?
Hope it helps
Trinidad.

ADDING CUSTOM ATTRIBUTES TO PORTAL USER

Hi,
We are using ldap server as the EP 6.0 user database.
We have to add few custom attributes like comanycode etc to the user.
As I understand, the first activity will be to add these custom attributes in the ldap followed by mapping of portal logical attributes and the custom attributes in dataSourceConfiguration_xxx.xml file.
Now what about showing these attributes in the all relevant user management screens (like Create User, Modify User etc).
Can anyone please tell the configuration for the same.
Any input is highly appreciated.
regards,
Chandra

Hi
Additional custom attributes can be added by editing the dataSourceConfig....xml.In this case logical to physical mapping has to be performed for each attribute.The attributes created without any mapping may be using the default namespace.
The getArttibute() method can be used for getting the attribute values of the specified logical attribute.
IUser user;
String attrs[]=
user.getAttribute("<nameSpace>","<logicalname>");
<b>Editing the dataSourceConfig....xml for Logical to Physical mapping</b>
Inside the nameSpace add the attribute inside the attributes tag as below.
<nameSpace name =.........>
<attributes>
<attribute name = "<logicalnameyouwant>">
</attribute>
</attributes>
Inside the attributeMapping specify the attribute name given above and the physicalAttribute as below
<attributeMapping>
<nameSpace name =.........>
<attributes>
<attribute name ="<logicalnameyouwant>"
<physicalAttribute name= "<physicalnameyouwant>"/>
</attribute>
</attributes>
</attributeMapping>
Regards
Geogi

Custom Attribute in OIM user Form is not populated.

Similar Messages

Maybe you are looking for