Custom attributes are not showing up the data

Hi,
I added couple of custom fields in UWL.
I followed the following blog .
http://weblogs.sdn.sap.com/cs/blank/view/wlg/20379
It is showing up the columns but there is no field values(data). It is with ECC system EHP4 and portal on EHP1.
I used the business objectZBUS2078(copied from BUS2078).
I tried to use the wizard too. Same problem. I tried to retrieve existing standards fields too (Description, priority kind) still the values are not getting populated. But standard fields are working. The same standard fields when I tried to use as custom they are showing blank.
Any Ideas. Am I missing any thing.
Regards
Mark

Hi DIAdemUser1,
This feature was indeed removed. R&D felt like it caused more confusion than benefit, and I agree. I do apologize to you and others who liked the feature that has now disappeared. When DIAdem 9.0 released the custom properties in the Data Portal showed their data types, but that feature was also removed in favor of simplicity. I often miss that feature, but it's for the greater good.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

Custom field values are not storing in the data base

Hi Friends,
We have created one Custom field called ZZ_APPROVER in Rfx Header , we have included this field in the below stuctures
1.INCL_EEW_PD_HEADER_CSF_BID
2.INCL_EEW_PD_HEADER_CSF
The data type of this field ( ZZ_APPROVER ) is CHAR and the length is 1 . we have given 2 fixed values in Value Range
1 -
X+2 Approver
2 --- Provisional Approver
so when we select either 1 or 2 ( in Drop Down ), its displaying properly on RFx Screen, but when we try save this document the values are not strong in the data base.
Can any one give me idea why its not stroring in the data base
Thanks in Advance
Kumar Srini

Hi Ganapathy,
A Record is created in table BBP_PDHSC , for other z fields, the values are stroing , but for this field ( ZZ_APPROVER ) [ drop down list ], the value is not stroring
Thnx
Kumar Srini

Why my old emails are not showing on the blackberry

Hi Guys,
I have just bought Blackberry Curve 9360. Can somebody, please tell that why my old emails are not showing on the blackberry. May be it has not synchronized my whole mailbox.
Kindly advise how can I do that.
Regards... Murtaza

Old emails, in what manner? As in previous to installing the account on this device?
Did you use the Device Switch Wizard found in the BlackBerry Desktop Software?
How did you move your old emails over from the old device to the new?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Apps needing access to Contacts are not showing in the Privacy pane of security

I have apps like cobook and Alfred that need access to Contacts but they are not showing in the Privacy pane of the Security & Privacy System Preferences.

Back up all data.
Triple-click the line below to select it:
~/Library/Application Support/com.apple.TCC/TCC.db
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with an item selected. Move the selected item to the Desktop, leaving the window open. Log out, log back in, and test. All your privacy settings will be reset to their defaults. If there's no change, put the item you moved back where it was, overwriting the one that may have been created in its place, and log out again. Otherwise, delete the item you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

I just updated my iPhone 4 to iOS 7.1. The apps I had previously installed are not showing on the screen. They are located in App Store icon. How do I move the icons so they are showing on the screen.

I just updated my iPhone 4 to iOS 7.1. The apps I had previously installed are not showing on the screen. They are located in App Store icon. How do I move the icons so they are showing on the screen.

You can move apps around in iOS 7 the same as iOS 6. Press an app icon until you see it wiggle; then drag it to where ever you want it to be. Drag it onto another app to create a folder with the two apps. Tap the Home button to stop the wiggle.

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

Several artists are not showing in the artist list on the Ipod.

Ok. As the title implies on my Ipod there are several artists that are not showing in the artist list. However, in Itunes an artist is clearly defined. I even changed the artist name and still had no outcome. The album is there....but I have to sort through the artist list in order to listen to the music. Can someone help me figure this one out?

The "missing" artists probably have their albums tagged as "Part of a Compilation" and you have the Compilation setting turned ON on your iPod. Either turn Compilations off (go to +Settings/Main Menu+ and +Settings/Music Menu+ and disable Compilation on both menus), or edit the tags to remove the Compilation option. Compilations are intended to be used for multi-artist albums, but often you'll get an album from a single artist tagged as a Compilation since the Gracenote database has an error in it.

IOS 5 - Notification are not showing in the lock screen knowing that the option view in lock screen is active ?

Hi ,
After Upgade my iphone4 to ios 5 , Notifications are not showing in the lock screen knowing that the option view in lock screen is active ?
Regards
HM

I experience this also sometimes (whatsapp), is this a bug??
sometimes when a person writes 2-3 messages in a row (for instance) in whatsapp (im in standby mode), it sometimes only displayes ONE message in lock screen mode (though he/she wrote more than 1), and sometimes shows the right corresponding written messages!
Why is this?
its really annoyoing when you get messages in lock screen mode BUT it doesnt stay and remain so you notice it. That way you get missed messages etc and notices it first...when doing the "pull-down list".
FIX THIS

Have set up icloud on my pc but the events form my ipad mini are not showing on the calendar

have set up icloud on my pc but the events form my ipad mini are not showing on the calendar. How do I do this?

Hi ailsafromgbr,
Thanks for using Apple Support Communities. This article has steps you can take to troubleshoot issues with iCloud calendars:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Cheers,
- Ari

Messages are not showing in the SXMB_MONI

Hi...All,
we are doing FILE-RFC synchronous scenario with out BPM, in the communication channel monitoring it was showing success, but in File server file is not coming to target side from sender, messages also not showing in the SXMB_MONI.
how can i solve these issues, pls suggest me...
thanks in advance,
Jain.

Hi,
Please follow the steps below to see the synchronous messages in sxmb_moni
Step 1. Go to transaction SXMB_ADM
Step 2. Click on Integration engine configuration
Step 3.Go to Edit - Change specific configuration data
Step 4. Add the paramaters:
LOGGING and LOGGING_SYNC category RUNTIME current value = 1 (active)
PS: You can also set TRACE_LEVEL to 3 so that all processing steps and details will be logged.
Reward points if answer is useful.
Thanks
Amit

UWL custom attributes are not retreived

Hi all,
We are trying to add some custom attributes to our UWL. We are able to see the new columns but they remain null. It seems that the values are not retrieved from the backend.
We have tried defining custom attributes from workflow container, from BOR object and even UM but without success.
We have followed this thread http://weblogs.sdn.sap.com/cs/blank/view/wlg/20379 and also other ones.
Here is my code for my custom attributes (under "TEST" comment):
<ItemType name="uwl.task.webflow.srm.TS00700018" connector="WebFlowConnector" defaultView="TS40008005_view" defaultAction="com.sap.pct.srm.core.action.launchWD.inv.detail" executionMode="default">
       <ItemTypeCriteria externalType="TS00700018" connector="WebFlowConnector"/>
                        <CustomAttributes>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="BOTYPE" displayName="Type of Business Object"/>
               <Attribute name="BOID" displayName="Business Object ID"/>
               <Attribute name="BOMODE" displayName="Business Object Mode"/>
          </CustomAttributeSource>
          
          <CustomAttributeSource id="ABAP_BOR" objectIdHolder="externalId" objectType="DECISION" cacheValidity="default">
                       <Attribute name="V_BE_REFOBJ" displayName="Description"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="UM" objectIdHolder="creatorId" objectType="user" cacheValidity="final">
                    <Attribute name="department" type="string" displayName="Department"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="W_HEADER_INV" displayName="Header"/>
          </CustomAttributeSource>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="W_HEADER_INV" objectType="WebflowContainer" cacheValidity="final">
               <Attribute name="GUID" displayName="MiGuid"/>
          </CustomAttributeSource>
          
     </CustomAttributes>
     <Actions>
          <Action reference="com.sap.pct.srm.core.action.inv_approve"/>
          <Action reference="com.sap.pct.srm.core.action.inv_reject"/>
          <Action reference="com.sap.pct.srm.core.action.launchWD.inv.detail"/>
          <Action reference="com.sap.pct.srm.core.action.launchWD.print"/>
     </Actions>
</ItemType>
I've read in this thread [UWL: Time Delay of SAP and Custom Attributes: refresh necessary|UWL: Time Delay of SAP and Custom Attributes: refresh necessary] that UWL cache and the delta pull mechanism must be configured for the new attributes but I don't know how to check it.
Please, can anyone help me?
Thanks in advance,
Regards

Hi all,
I'm going to close this thread as it is duplicated.
Regards

Lync custom attribute are not shown in ADSIEdit

I have a AD running on Windows Server 2012 R2 with Lync extensions.
When I try to see the Lync custom attributes using ADSIEdit or using Active Directory Users and Computers they do not appear. However, when I use power shell Get-ADUser I do see all the attributes. The attributes are not empty.
e.g: Get-ADUser simons -property *
msRTCSIP-UserEnabled : True
msRTCSIP-UserPolicies : {0=1759513798}
msRTCSIP-UserRoutingGroupId : {10, 110, 186, 167...}
Any help will be highly appreciated.
Benny

Hi Benny,
Have you enabled the advanced features option?
Normal:
Enable Advanced Features:
Best regards,
Eric

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

Some of the apps are not showing in the launchpad only the names are not the icon

Some of the apps icons are not showing in launchpad. Only their names are showings

So what version of Premiere Pro are we talking about here?
Describe what "cant select" and "cant increase" means.
We cant see what you are doing or with what or where!
These arent things that get "broken".

My photos are not showing and the videos say requested url not found

I have an iPhone 4s running 5.0.1 My photos are not showing up in iPhoto and on my phone they never focus in to the clear picture. Also any videos I have taken are saying "The requested url is not found on this server" I am not sure what is going on. Anyone know how to Fix this.

sounds like there might be a problem with your iphone's memory
but this might help http://www.iphonelife.com/tip/how-to-get-photos-off-iphone
http://www.copytrans.net/copytransphoto.php

Custom attributes are not showing up the data

Similar Messages

Maybe you are looking for