Custom attributes in vendor group

Hi,
I am unable to see custom Attributes after upgrading from SRM 3.0 to SRM 5.0
As per SRM 5.0 the vendor root is visible now in PPOMV_BBP.
As per post upgrade document if we register custom attribute in T77OMATTOT then the attributes should be visible in PPOMV_BBP
Still the attributes are not visible in PPOMV_BBP
can anyone suggest on the same
Helpful aswers will be rewarded.
Thanks
jayesh

Hi
T77OMATTR is the main table.
Please have a look in the other tables as well.
T77OMATDIR   General Attribute Maintenance: Change Information
T77OMATGT    Attributes of General Tree-Overview Object
T77OMATGTC   Attributes of General Tree-Overview Object
T77OMATTDB   General Attribute Maintenance: Help Indices for Attributes
T77OMATTIX   General Attribute Maintenance: Index Analysis
T77OMATTOT   Gen. Attribute Maintenance:Attributes per Obj.Type/Scenario
T77OMATTR    General Attribute Maintenance: Definition of Attributes
T77OMATTRT   General Attribute Maintenance: Text Tables for Attributes
T77OMATTSC   General Attribute Maintenance: Application Scenarios
T77OMATTST   General Attribute Maintenance: Texts on Scenarios
T77OMATTUS   General Attribute Maintenance: Attributes per Scenario
<b>Other useful links -></b>
<u>Looking up Org. Paln Attributes
Re: Creating a new custom attributes in org structure
Re: The attributes for user could not be determined --
Re: Attributes dropdown list empty in settings (SRM 5.0)
urgent: regarding ATTRIBUTES</u>
Regards
- Atul

Similar Messages

Custom Attributes in Target Group Email Campaign Not Refreshed

We have a campaign sending emails to a target group of BPs. To fill our custom attributes with values we have implemented our code in badi CRM_IM_ADD_DATA_BADI method CRM_IM_BPSELE. We tested our code using the Test Send feature from the email form and all worked fine.
But when we ran the campaign in the background for a Target Group with multiple BPs it would not work correctly, our attribute values were incorrect.
We discovered while debugging the job, that the badi gets run once for each BP, but the attribute values from the previous BP do NOT get refreshed. In fact there are 2 entire sets of attribute records in the CT_ATT_VALUES table parameter. Each time through it multiplies by another set of our attributes.
I have put code in the badi as a workaround that deletes the previously filled attributes for the previous BP, but I'd like to figure out what is causing this problem.
Any help would be appreciated.
thanks,
Lee

Hi Lee,
Is this issue resolved for you now??
I am facing the similar problem.
Though the BADi is not used for these two mails (it is used in some other mail forms), it is actually called in 'CRM_ERMS_MAIL_COMPOSE' Function Module and the process is same as u said. There are 2 sets of values.
I am using a Mail Alert functionality where in a 'Mail Alert ON' is sent to field engineers (FE) and then upon FE accepting the work we will send a 'Mail Alert OFF' to FEs.
Problem is, we get one or two fields data incorrectly sometimes. I am not able to find out the root cause yet.
Please let me know if you have had any resolution to this!
Thanks in advance.
Chaitanya

Attributes in Vendor Group -PPOCV_BBP

Hi SRM Gurus,
From SRM 5.0 -Vendors are created separately in Vendor Group.
There are 8 attribute in the vendor Group
1.BUK -Company code.
2.CAT-Catalog ID
3.CUR -Currency.
4.EXT-ITS -Current ITS for external Partner
5.TOG- Tolerance Group
6.VENDOR -ACS -Accounting system for Vendor
7.VENDOR- SYS -System Alias for Vendor.
Which are Attributes we have to maintain
1)Mandatory Attributes
2)Optional Attributes
Which are the Attributes to be inherited?
Can you please give your inputs.
Without Attributes whether it will work?
Regards
G.Ganesh Kumar

Hi Muthu,
Whether we have to maintain all the Five attributes as Mandatory at the org level to be inherited to all the vendor attached
to the org
whether without attributes it will work? We have upgraded from SRM 3.0 to SRM 7.0
Reg
G.Ganesh Kumar.

Custom Attributes in Target Group

Hi,
we are experiencing an issue during Target group creation: we are unable to see our custom attributes in the Target Group.
We have an Attribute List created by a Custom infoset; the Infoset is based on a custom Table.
When we create a profile Set from this Attribute list, the Target Group is created with the correct records number, but when we look at the Target Group we find there only standard attributes, that are not defined in our Attribute List (they seems all BUT000 fields).
How can we add our custom Field to Target Group Structure?
I've read someone suggests to enahnce CRM_IM_ADD_DATA_BADI BADI: this is the only possible option? there is a way to do it using SPRO transaction?
Thanks and regards,
Francesca

Hi Francesca ,
Thanks for reporting your concern.
When the target group is displayed on the WebUI, the system uses a standard structure crmt_mkttg_genil_tg_i_enhance. The fields available for selection comes from this structure. In this structure there are some 30 user fields provided which can be filled through the badi 'CRM_MKTTG_SEG_MEM_EX'. Using this badi you can display the required Custom details.
Hope this helps.

Why a customer or vendor group One Time can't using?

Why a customer or vendor group One Time can't using with special G/L ? for example Donw payment or chque receipt
Many thanks for any answer?

Hi Blue,
Please refer OSS notes 19638
Hope this helps.
Please assign points as way to say thanks

Customer-Vendors Group wise statement

How can i see the Customer-Vendor group wise reports..give me the Tcodes for that...
Regards
Devi

Hi,
You grp customer via statiscal customer grp.
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Best Regards
Ashish Jain

Create/Edit "Custom Attributes" in Dynamic Distribution Groups

Hi,
I wanna create a Dynamic Distribution Group based on the users "title" and "company".
I've noticed that there are 15 "Custom Attributes" that I can edit in someway, I guess via PowerShell?
So what is the easiest way to accomplice this?

Hi,
Agree with the above suggestion, you can also bulk change the custom attributes:
Get-Mailbox -ResultSize Unlimited -Database Execs | Set-Mailbox -CustomAttribute1 “title”
http://dougg.co.nz/2012/05/01/bulk-setting-exchange-2010-custom-attributes/
to Edit Custom Attributes：
get-mailbox -filter {customattribute1 -eq ""} | set-mailbox -customattribute1 = "<value>"
And here is a reference about Create/Edit "Custom Attributes" in Dynamic Distribution Groups：
http://windowsitpro.com/exchange-server-2010/exchange-2010-sp2-value-custom-attributes
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Angela Shi
TechNet Community Support

Email a newsletter to a customer/vendor group, hiding recipients (like Bcc)

Is it possible to use Outlook integration to email a newsletter to a customer/vendor group, hiding recipients (like Bcc)?
Can outlook integration see the distribution list? i.e...what group the BP belongs to?
Thanks

Hi,
Outlook integration is deigned to link B1 to Outlook. It may not be able to use all advanced functions such as hiding recipients.
For emailing a newsletter to a customer/vendor group, you may use query to get the list and create a distribution group to achieve your goal.
Thanks,
Gordon

Grouping by custom attribute

Hi,
When you do a Edit Region properties in a Portal page, there is a section called Item Display Options. It has a Group By option, wherein you can group it by Category, Author, Date and Item type. Is it possible to have a custom defined attribute in this list?
Thanks,
Vijay.

hi vijay,
sorry but there is currently no way to group items in a region by any other attribute (also custom attribute).
regards,
christian

Adress list custom attribut user in multiple group

Hello,
I am trying to configure some distribution group in exchange 2007
I wanted to have list based on my OU but i cant find how so i went with custom attribut
I put my member in the correct service BUT i have the manager that need to be on all the group and some user in2 or 3 group.
I cant figure how and where to do this!
Can you help?

So you're trying to use Dynamic Distribution Groups?
If you're creating the DDG using the Exchange Management Console just be sure to select the "recipient container" in the second dialog box (the one labeled "Filter Settings").
Sometimes its easier to create a "normal" static distribution group and then add the DDGs as members. You can add the DDG that selects the managers to as many different groups as you like. You may wind up with more groups, be the filter on the DDGs will
be much easier to understand (or to create if you must use Powershell to construct the DDG).
--- Rich Matheisen MCSE&I, Exchange MVP

VENDOR GROUP in SRM 5.0

Hello,
A) Can anyone tell me what this vendor group is? What is it used for?
B) A have a case (SRM SUS) where in a vendor X supply it to Y by procuring from number of sub-vendors (A, B, C) which are on SRM. Now is it possible for vendor X to check vendor A, B, C `s account and process their documents.
Can you through some more light on this kind of scenarios and probable solution to it.
Regards,
Vivek

Hi Vivek,
a) When we replicate vendors from R/3 backend system to SRM system using transaction BBPGETVD", we are these vendors canbe seen in transaction PPOMV_BBP. We see vendors assigned to vendor root node and grouped under vendor groups. System will automatically group vendors based on different attributes. e.g. If you have multiple backend systems scenario, system will create two vendor groups. Or you can also use grouping functions to differentiate vendors based on attributes.
b) For this specific requirement I would suggest you to develop your own custom report to update entries in tables BUT000 and VENMAP. You can replicate a vendor, get new Business Partner and assign additional vendor codes to the existing BP.
I hope this answers to your doubts.
Regards,
Prashant
Do reward full points for useful answers.

Issue with Sorting by Custom Attributes

In our custom SES query application, I am trying to implement sorting at the custom attribute level. I am having difficulty in understanding exactly how to set the options on doOracleOrganizedSearch() to achieve the desired result.
We have a table based content source and allow a user to search via custom search attribute. We are also going to allow them to sort by custom attribute.
For example, say we have a Project content source and one of the attributes is "Client Name". Users are going to be able to sort by client name (A-Z and Z-A). I have a prototype working but it only seems to work if I set topN to a very high number.
I want to bring back the first 10 documents sorted by Client Name A - Z and allowing paging to the next set of sorted results. My prototype works if I set topN to 1000 (more than the # of results) but does not work if I set it to 10 (# of results I want to display per page).
Below if my code. Note I am not setting the group attribute or the cluster list. Perhaps this is the issue?
Many thanks in advance!
OracleResultContainer results = service.doOracleOrganizedSearch
(this.m_query, // query
this.m_docsRequested, // topN
this.m_startIndex, // startIndex
new Integer(10), // docsRequested
this.m_dupRemoved, // dupRemoved
this.m_dupMarked, // dupMarked
this.m_searchDataGroup, // groups
this.m_queryLang, // queryLang
this.m_docLang, // docLang
this.m_returnCount, // returnCount
this.m_filterConnector, // filterConnector
filters, // filters
this.m_fetchAttributeNames, // fetchAttributeNames
null, // searchControls
null, // groupAttr
this.m_sortAttributes, // sortAttrList
null); // clusterList

Hi Nikola,
in 9.0.1 even if you rewrite the web interface you can't sort files by custom attributes setting a SortSpecification to a Folder. You can only sort by base attributes with getItems(). To get item sorted on custom attributes you must perform a search (a lot more codelines).
Regards, Alessandro

Problem with setting custom attribute and it being searchable

I'm having an issue with setting a custom attribute and having it be searchable using Portal 10.1.4. The situation that we have is that we initially added a bunch of files to Oracle Portal using webdrive. Later on, we decided that we needed another custom attribute called "Pinned Item" that will be used for searching (boolean value) and gave it a default value of false. The attribute was then added to the "File" item type in the "Shared Objects" group.
It appears that since this attribute wasn't initially available on the file object, we couldn't search on it so we decided to set it programatically. First, I tried using wwsbr.set_attribute but it errored out seemingly because the value wasn't set in the first place. If I set a value first by using the web front end, I could then use the set_attribute procedure.
So, I moved on to using wwsbr_api.modify_item and it appears to set it (although everything is being set to false until I changed it to "text" instead of "boolean" which is OK because that's what I wanted anyway... see metalink bug 390618.1). I'm using the method outlined in metalink doc 413079.1. When I do set it to a "1", and edit the item the check box is checked indicating that it is set correctly. And if I just click "OK" to save the attributes after I open it everything works like it should.
However, the advanced search (and custom search portlet) and the search APIs are not picking it up. I'm not sure if I'm hitting Metalink bug ID 5592472 or not as that's using the "set_attribute" procedure instead of the modify_item procedure. And their "workaround" of setting the attribute in the UI isn't really feasible for a couple thousand files.
So far I've tried the following things to get it working:
1. I am calling wwpro_api_invalidation.execute_cache_invalidation
2. I have executed wwv_context.sync
3. I cleared the page group cache
4. I invalidated all of the web cache
Does anyone else have any other suggestions?

I'm having an issue with setting a custom attribute and having it be searchable using Portal 10.1.4. The situation that we have is that we initially added a bunch of files to Oracle Portal using webdrive. Later on, we decided that we needed another custom attribute called "Pinned Item" that will be used for searching (boolean value) and gave it a default value of false. The attribute was then added to the "File" item type in the "Shared Objects" group.
It appears that since this attribute wasn't initially available on the file object, we couldn't search on it so we decided to set it programatically. First, I tried using wwsbr.set_attribute but it errored out seemingly because the value wasn't set in the first place. If I set a value first by using the web front end, I could then use the set_attribute procedure.
So, I moved on to using wwsbr_api.modify_item and it appears to set it (although everything is being set to false until I changed it to "text" instead of "boolean" which is OK because that's what I wanted anyway... see metalink bug 390618.1). I'm using the method outlined in metalink doc 413079.1. When I do set it to a "1", and edit the item the check box is checked indicating that it is set correctly. And if I just click "OK" to save the attributes after I open it everything works like it should.
However, the advanced search (and custom search portlet) and the search APIs are not picking it up. I'm not sure if I'm hitting Metalink bug ID 5592472 or not as that's using the "set_attribute" procedure instead of the modify_item procedure. And their "workaround" of setting the attribute in the UI isn't really feasible for a couple thousand files.
So far I've tried the following things to get it working:
1. I am calling wwpro_api_invalidation.execute_cache_invalidation
2. I have executed wwv_context.sync
3. I cleared the page group cache
4. I invalidated all of the web cache
Does anyone else have any other suggestions?

How to add Custom Attributes in the SOAP header for OWSM

Hi,
I like to know how to add the Custom Attributes in the SOAP header for OSWM username token authentication.
Currently we are getting the header element like
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
here we need to add the attribute "soap:mustUnderstand="1" , so the element will look like
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
Any info on this will be helpful.
Thanks,
ArunM

Hi Jay, you can make it in more than 1 way.
I suggest you the following:
- create an URL iview that points to any URL you want.
- define a Resource that points to the iview (with a window name, to open in new window)
- define an Area that points to the resource
- add your new Area to the your current Area Group
Regards!

Need to create new users in Office 365 with custom attributes from a csv file

I am exporting users from an active directory environment and then deleting them from AD. They are Alumni and will no longer be in AD.
I have a csv file with the following fields that I need to use to create new Alumni email boxes in Office 365 for. I need the CustomAttributes because my Dynamic Distribution Groups use them. I am fairly new to PowerShell and have been unable to get this
to work. I suspect I may have to split it into two parts, but am not sure how to proceed. Any assistance would be appreciated. I was directed here from the Office 365 community.
Import-Csv -Path c:\CSVfiles\CreateAlumni.csv | ForEach-Object {
   New-MsolUser -FirstName $_.FirstName -LastName $_.LastName
   -UserPrincipalName $_.UserPrincipalName
   -DisplayName "$($_.FirstName) $($_.LastName)"
   -Password $_.Password
   -CustomAttribute1 $_.CustomAttribute1
   -CustomAttribute3 $_.CustomAttribute3
   -CustomAttribute10 $_.CustomAttribute10
   -CustomAttribute11 $_.CustomAttribute11
   -CustomAttribute12 $_.CustomAttribute12
   -LicenseAssignment 'domaincom:EXCHANGESTANDARD_ALUMNI'
   -UsageLocation US

Ok, it wasn't stopping after 2 iterations. What I was seeing was 2 failures. The first was the Get-Mailbox command and the second was when it tried to assign attributes. For some reason it is not looping when it fails. It just goes on and tries to assign
the Custom Attributes. I added writes in to tell me what was happening.
### Check if mailbox is provisioned yet
Write-Host "Checking if mailbox is provisioned yet..." -foregroundcolor yellow
$found = $false
$count = 0
Do {
try {
Get-Mailbox -Identity $_.UserName -ErrorAction Stop
$found = $true
Write-Output 'Mailbox found. Details:'
Get-Mailbox -Identity $_.UserName
} catch {
Write-Output 'Sleeping'
$count++
Start-Sleep -Seconds 5
If ($count -ge 12) {
Write-Output 'Mailbox not found. Quitting.'
$found = $true
} Until ($found)
Write-Host "Adding Custom Attributes to User" -foregroundcolor yellow
Set-Mailbox -Identity $_.UserName -CustomAttribute1 $_.CustomAttribute1 -CustomAttribute3 $_.CustomAttribute3 -CustomAttribute10 $_.CustomAttribute10 -CustomAttribute11 $_.CustomAttribute11 -CustomAttribute12 $_.CustomAttribute12
Write-Output "User has been Provisioned in Office 365!" -foregroundcolor yellow
Checking if mailbox is provisioned yet...
The operation couldn't be performed because object 'Joe.Cool2003' couldn't be found on 'CO1PR07A002DC01.NAMPR07A002.prod.outlook.com'.
    + CategoryInfo
: NotSpecified: (:) [Get-Mailbox], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=CO1PR07MB125,RequestId=e1aabda1-01e4-4f68-984e-e20be0975242,TimeStamp=5/22/2014 4:23:59 AM] [FailureCategory=Cmdlet-ManagementObj
   ectNotFoundException] 2788FB48,Microsoft.Exchange.Management.RecipientTasks.GetMailbox
    + PSComputerName        : pod51038psh.outlook.com
Mailbox found. Details:
The operation couldn't be performed because object 'Joe.Cool2003' couldn't be found on 'CO1PR07A002DC01.NAMPR07A002.prod.outlook.com'.
    + CategoryInfo
: NotSpecified: (:) [Get-Mailbox], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=CO1PR07MB125,RequestId=16a8a2bc-333a-455c-8504-e0b99c44c334,TimeStamp=5/22/2014 4:24:00 AM] [FailureCategory=Cmdlet-ManagementObj
   ectNotFoundException] 2788FB48,Microsoft.Exchange.Management.RecipientTasks.GetMailbox
    + PSComputerName
: pod51038psh.outlook.com
Adding Custom Attributes to User
The operation couldn't be performed because object 'Joe.Cool2003' couldn't be found on 'CO1PR07A002DC01.NAMPR07A002.prod.outlook.com'.
    + CategoryInfo
: NotSpecified: (:) [Set-Mailbox], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=CO1PR07MB125,RequestId=8319d220-b9dd-492f-8182-5083cf56e58b,TimeStamp=5/22/2014 4:24:00 AM] [FailureCategory=Cmdlet-ManagementObj
   ectNotFoundException] C7844A24,Microsoft.Exchange.Management.RecipientTasks.SetMailbox
    + PSComputerName
: pod51038psh.outlook.com
User has been Provisioned in Office 365!
Of course the user has been provisioned, but the CustomAttributes have not been assigned. :(

Custom attributes in vendor group

Similar Messages

Maybe you are looking for