Custom backup using time capsule

Just wondering how I can back up my applications on my laptop using Time Capsule? Can I drag and drop my applications folder into Time Capsule or are there other files buried in the system folder? I don't have all the install discs for all of my programs, they mysteriously disappeared after moving to my new apartment. I'm not referring to preloaded software that came with my macbook because I can use the discs that came with the laptop...I'm referring to photoshop, video converter apps, toast, ect. Thank you in advance for those who reply.
at

adam, Welcome to the discussion area!
You can drag and drop the applications to the Time Capsule for backup. However many times the licensing information will not be preserved.
A safer bet is to allow Time Machine to backup the applications.

Similar Messages

Upgraded my 2010 macbook pro to mountain lion, unable to complete time machine backup using time capsule. Getting error 112

Upgraded macbook pro to mountain lion, get the following message
"the backup disk image "......." could not be accessed (error 112)
I've tried many of the suggestions from other discussion threads, still unable to get anything to work. Have 4 other computers backing up to the same time capsule, all of them are functioning normally, however they are not upgraded to mountain lion.
Suggestions?

This simple procedure will clear your Time Machine settings, including your exclusion list. If you have a long exclusion list that can't be recreated easily, you may prefer a more complicated procedure that preserves the exclusion list. In that case, ask for instructions. Otherwise, do as follows.
Triple-click the line below to select it:
/Library/Preferences/com.apple.TimeMachine.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Copy it to the Desktop. Then move it (the original, not the copy) to the Trash. You'll be prompted for your administrator password. Reboot, recreate your settings in the Time Machine preference pane, and run a backup to test. If TM now performs as expected, delete the file you copied to the Desktop.

HT201250 wireless backup using time capsule

my first back is taking much more time than expected. Notes do say that the first back up wull take some time, which is expected. BUT over the last 48 hours it has only backed up 3.4 GB out of a measured 80 GB. The math says someting is very wrong with the duration. Or is it? Can anyone give some clues. Simply, all I have done is set the backup disk and started the backup and the left the device alone. The wireless connection is strong (signal) but the external HDD sounds like it is constantly in "pain". Always been like it.

It's much better (2-3 times faster and more reliable) to do the initlal backup via Ethernet.
If it's only done 3.4 GB in 2 days, something is terribly wrong. You might want to cancel the backup, connect via Ethernet, and start over.
See Time Machine - Frequently Asked Question #29 for a rough guide to how fast it should run.
If it's considerably slower, try the things in the green box in #D2 of Time Machine - Troubleshooting.

Using Time Capsule to backup a small office network

Hi all,
I am hoping somebody may be able to tell me if this is a good plan or not. I have been really struggling to find a good network backup solution. I've been trying to make a Lacie Ethernet Disc Mini work but have finally given up on that one.
I am trying to find a simple solution to backup a network of 5 macs. 1 is currently plugged straight into my router, another router port extends to switch in another building which has 4 further macs along with other network devices connected. Crucially, there is no wireless access from this building to the router.
Would all macs backup to the Time Capsule, including those that are wired via the switch? If so, at what speed? I have heard suggestions that it can be a very slow process?
I'm not worried about any kind of streaming - purely a good backup device.
All advice very gratefully received,
Regards
Richard

Hi Richard,
I have a small business and chose to use Time Capsule as a backup for my company's network. We have 12 workstations and use all Macs, some wireless and some not. I'm an experienced Mac sys admin and have setup many networks, including designing and installing the network we currently have, which is driven by a Leopard Server.
Based on a year of experience working with Apple's newest airport extreme and capsule products, I would not use them in business and am moving towards a wireless network hd using Carbon Copy Cloner as my software. This is due in part to numerous calls to Apple for support on these items, having to reset them dozens of times, and being told by Apple support that using these products for business is not recommended.
Carbon Copy Cloner is a great tool for a backup, especially for workstations, as you can create partitions for each computer on your HD and CCC will create *bootable* backups of your HD - a great lifesaver if a computer fails and you don't have time to reinstall everything.
I will be putting the capsule and extreme devices on Craigslist for sale and hope to recoup enough to get the wireless network drive, which my research shows is the best way to get network backup solutions for small business.
I hope this helps.

I used an external hard drive for my backups via Time Capsule. I bought a new computer and I want to transfer all my old fonts over to the new one but when I go into the Font Library from the hard drive backup but my downloaded fonts aren't there?

I used an external hard drive to back up my computer using Time Capsule before I bought a new one. I am slowly transferring information fromt he backup to my new computer and I want to transfer over my old font book. When I go into the Font folder on the hard drive the only fonts that show up are the ones that came stock with the computer not any of the ones I have downloaded over time. Could they be downloaded somewhere else?

The answer to that would probably be "Yes." If you don't remember where your fonts were stored, you may want to search your backups for any of the font files you know the names to. See where that takes you.
Ideally, Font Book and other font managers will temporarily store the fonts you "installed" into the System when you run the OS. When you shut down, etc. they are removed and reloaded on restart. The permanent place fonts reside is where you saved them when or after you downloaded them. I typically create a Resources folder on the root level of the computer and place a Fonts folder there. Then I install fonts from there, and they are available to all users on that iMac.
Perhaps if you did not have that kind of a strategy, perhaps many of them are still in your Downloads folder?

I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time.

I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed u

I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed up. I did a full reset of Time Machine. I disconnected the external drive and reconnected it. It is not a matter of file types, no files and no folders have gotten backed up. Everything looks normal though unless one goes hunting for recent files on the back up.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

"Backup failed" using Time Capsule

Hello, trying to back up a Macbook using Time Capsule, keep getting the message that backup failed, even when I attach with MB to TB with an Ethernet cable.
Anyone have any idea where I could begin to start looking for a solution?

Hi James,
Have you tried erasing your Time Capsule disk? If it's the initial backup, it could be that you have a corrupt sparsebundle file. Go into AirPort Utility > Manual Setup > Disks and select and erase the internal disk. Then try your backup again using an ethernet cable and see if that works.

HT3275 I am received an error on my Time Capsule which states the backup disk image "Volumes/Data/MacBook Pro. sparse bundle? is already in use. so time machine couldn't complete the backup to time capsule - any suggestion

I've received an error message Time Machine couldn't complete the backup to Time Capsule, the backup disk image /Volumes/Date/....MacBook Pro.sparsebundle" is already in use. Any suggestions as to what I can do to fix it?

I've got mine working again by deleting a partial backup that was on the Time Capsule.
I mounted the backup sparsebundle, and then browsed the content and found a filestucture named <timstamp>.inProgress. I removed that and the followed the tip to disconnect described above. That did the trick for me.

Using time capsule along with offsite backup?

hello, thanks for taking a look at my post.
for my office, we want to use time capsule to backup all of our computers, but are looking to then have that information backed up off-site in case of possible theft/fire/etc. at the office. does time capsule have an option to backup to mobile me?, or any other off-site storage?
if this is not the most ideal backup situation, I would appreciate any other suggestions.
thanks for your time,
steve

...does time capsule have an option to backup to mobile me?, or any other off-site storage?
No for both questions.
Time Capsule itself doesn't do any backups. Time Machine on each individual Mac is actually what performs the backup to the Time Capsule.

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error The backup disk image "/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle" could not be created (error 17). Help

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!

Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up.

Time Machine couldn't complete the backup to "Time Capsule".The backup disk image "/Volumes/Data-1/Macintosh.sparsebundle" is already in use.

When I back up my macbook pro to time capsule 3TB, this appears:
"Time Machine couldn’t complete the backup to “Time Capsule”.The backup disk image “/Volumes/Data-1/Macintosh.sparsebundle” is already in use."
and I'm not able to back up. What do I do?

As noted in the link I posted, that's fine if you're the only user logged-on to the only Mac using the TC's disks (internal and/or USB externals). If not, that may corrupt other data being written, especially other backups.

After formatting my HD and eventually restore my system from a backup on Time Capsule, will I still have access to my old backups as normally used to do via Time Machine?

I have a Time Capsule (4th Gen) and my backups on it, I need to completely erase my hard drive. My question is: after formatting my MacBook HD and eventually restore my system (OS X 10.6.8) from a backup on Time Capsule, will I still have access to my old* backups as normally used to do via Time Machine?
*(-and to the newer backups- if I had not restored my system from the last backup).
THANKS

That's a good question. Technically, Time Machine should make a new backup but not erase any old backups. But if there isn't sufficient space on the backup drive, then I'm not sure if Time Machine will simply warn you or just go ahead and remove old backups to make room for the new ones.
In any case, the new backup should have a different backup folder on the backup drive. That's my understanding. You can learn more at pondini.org.

HT3275 Time Machine couldn't complete the backup to "Time Capsule" because "-.sparsebundle" is already in use.

How do I correct ‘Time Machine couldn’t complete the backup to “Time Capsule” because “….sparsebundle” is already in use‘?.

Check out the More Like This column to the right.
Our most popular problem.. 6-10 times a day..
There is a bug.. fix is to pull the power from the TC.. count to 10 and power the TC again.
See C12 here if you need more help.
http://pondini.org/TM/Troubleshooting.html

Automatic Backups for PC (Vista & XP) using Time Capsule

Does anyone know if PCs (Vista & XP) can be configured for automatic backup on Time Capsule?
We have 4 Macs running Leopard and the auto backup is working fine there.
Additionally, we have a couple of PCs running Vista & XP and I would like them to auto backup also.
Thanks for your help!

No problem with the Windows part. First map a drive to the TC seems to be more stable then using the Airport utility. Then use the free NT backup utility that comes with XP, you will need to copy the utility and chm and the files ntmsapi.dll and vssapi.dll into a folder on the Vista machine but it will work fine. Also need to enable the Removable Storage management feature in the OS.
Another solution, consider Microsoft OneCare, it has a good backup feature.
Hope this helps

Custom backup using time capsule

Similar Messages

Maybe you are looking for