Custom BIOS for the GT60-0NC

I must admit I'm rather rusty to low-level modding at all, so if I'm being awfully unspecific, do not hesitate to ask and question me.
Using the E16F3IMS.10U BIOS ROM || [ msi(dot)com/service/download/bios-18654.html ], what is most important to me at the moment is to have a normal BIOS (full unlocked?) and being able to enable Intel-VT-x.
If you got extra time and it doesn't take to much effort or time, I'd also like to have the "full boot" image with the MSI logo replaced with a custom picture (where if it becomes applicable, just provide format, resolution, colour space, etc and I'll post a link to the image).
I'l donate to you once everything about my request has been cleared up and agreed upon.
Thanks on beforehand for taking time to help me (and the community); it is much appreciated.
-- D3fc0none

Hello,
Yes can offer you unlocked bios + intel rapid storage firmware update to the latest versions.
About VT-x, its should be already Enabled in the latest version, ie your current one.
Quote
If you got extra time and it doesn't take to much effort or time, I'd also like to have the "full boot" image with the MSI logo replaced with a custom picture (where if it becomes applicable, just provide format, resolution, colour space, etc and I'll post a link to the image).
Yep can be done as well.

Similar Messages

  • Custom BIOS for MSI GT60 ONC

    Hello there Svet I bought my laptop a few months ago and I noticed within a few days that it throttled quite a lot when put under heavy load. I thought that was quite odd for a gaming laptop of this calibre so I decided to try the 16F3EMS1_T16.rar from this link: https://forum-en.msi.com/index.php?topic=162629.0.
    It worked brilliant until I encountered a new problem. The throttling was simply gone, but the laptop began to overheat quite fast and the GPU would hit the 90s degrees if I did not turn on the Cooler Booster in time. I know they foretold that the moddes EC would generate more heat, but I at least thought that my laptop would still automatically turn on the fan speed depending on the heat. It turns on 100% when I hit like 90c degrees, but I find that to be a little too late for that. It seems like the fan runs 40% until the laptop hits the 90c and then it speeds up to 100%.
    So here is my question: Can you mod a newer version of the EC to include the OC and stop the throttling and make the fan kick in automatically?
    Best regards, Mathias

    Could you take your time to moddify one for me and what would the cost be? Atm my graphic card is laying at 61-64c when idle which is way too high if you ask me. Or am I wrong?
    Best regards, Mathias

  • Custom Bios for E1761IMS.30H

    Hello Svet Can you please pm me for the donation amount as well as if you can provide me with the custom bios for the following:
    BIOS Information:
    BIOS Version: E1761IMS.30H
    BIOS Build: 11/18/2011
    EC Version: 1761EMA1 Ver4.19
    EC Build: 11/22/2011

    Is it a barabone GX740 or retail?
    Go to BIOS Setup, then paste the information from "System Information" screen

  • Custom Bios for GX740

    Hi Svet
    Is it possible to get a Custom BIOS for the GX740, that have the hidden options unlocked e.g. HPET 32/64, and advanced settings?
    Thank You in advance
    Regards
    Alfi

    Is it a barabone GX740 or retail?
    Go to BIOS Setup, then paste the information from "System Information" screen

  • Custom BIOS for GE60 2oc

    Hello!
    I would like to request a custom bios for my laptop (MSI GE-60 2oc).
    I have had problems with low CPU utilization after updating the embedded controller with official MSI firmware update. At the same time I was supposed to update the BIOS, but I couldn't, using the official driver found on MSI download center, since my system told me it's not the right version.
    I wanted to try this new approach as a new bios might help, I figured. I can't find any downgrading for the embedded controller. Would a custom bios be good thing for me or am I doing this all wrong?
    Current bios: E16GCIMS.509
    EC firmware installed: 16GCEMS1.506
    The BIOS update that did not work: E16GCIMS.611

    I know got my current version of BIOS and EC by MSI support so I will experiment with them. Downgrading to EC v. 5.00 helped I think. I have started to meassure now and the thing is that my GPU seems to have a real low core clock. The GT750m is marketed as 967 mhz but GPU shark and 3DMark 11 shows that I have 405 mhz. When playing Starcraft 2 I get real low FPS considering the settings (25 fps while playing medium quality and 1080p res.) hard to find comparing stats on the net. When meassuring with 3Dmark 11 I get a 2800 score which is comparable to other machines like mine.
    GPU Shark v0.7.3
    (C)2013 Geeks3D - www.geeks3d.com
    GPU Shark v.0.7.3 gives me these numbers:
    Elapsed time: 00:01:40
    OpenGL memory - total:2048MB, usage:98MB
    GPU 1 - GeForce GT 750M
    - GPU: unknown
    - Bus ID: 1
    - Device ID: 10DE- FE4
    - Subvendor: MSI (1462-10E6)
    - Driver version: 9.18.13.3182
    - NV driver branch: r331_00-187
    - OS: Windows 8 64-bit
    - Bios version: 80.07.a2.00.07
    - GPU memory size: 2048MB
    - Bus width: 128-bit
    - GPU memory location: GPU dedicated
    - GPU memory type: GDDR5
    - GPU temp: 43.0°C (min:43.0°C - max:45.0°C)
    - GPU cores: 384
    - Performance states: 3
    - Performance state P0
    - GPU: 1183.5MHz
    - Mem: 2355.0MHz
    - VDDC: 0.856V
    - Performance state P5
    - GPU: 1183.5MHz
    - Mem: 800.0MHz
    - VDDC: 0.850V
    - Performance state P8 (current)
    - GPU: 405.0MHz
    - Mem: 405.0MHz
    - VDDC: 0.806V
    - True current clock speeds / VDDC:
    - Core: 135.0MHz
    - Mem: 405.0MHz
    - VDDC: 0.806V
    - GPU and memory usage:
    - GPU: 0.0%, max: 99.0%
    - GPU memory: 4.7%
    - GPU memory controller: 0.0%
    - Limiting policies (NVIDIA):
    - no limitation
    - Current active 3D applications:
    ---- 3dmark11.exe (PID: 6360)
    ---- furmark.exe (PID: 6328)
    ---- gpushark.exe (PID: 7028)
    Well well, will try new BIOS now when I get go back to my previous version if it doesn't help me.

  • Custom Bios for DPC Latency gone?

    I have the P43 Neo and suffer from DPC Latency spikes, which is very annoying since I work with audio a lot.
    However, the link to the 'custom bios' in the following topic is not available anymore:
    https://forum-en.msi.com/index.php?topic=125206.0
    Where can I download it?

    Quote
    MSI custom bios can be obtained from MSI Tech. here: http://ocss.msi.com.tw/

  • TS1702 When I try and use the Kindle app on my touch it keeps telling me to register the kindle. I register it using the account and password I used to get the app but it tells me there is no customer found for the email address and password. help

    When I try and use the Kindle app on my touch it keeps telling me to register the kindle. I register it using the account and password I used to get the app but it tells me there is no customer found for the email address and password. help

    No, it is asking you to register with your Amazon user id and password. Your Apple ID won't work.

  • Is it possible to create a customs declaration for the document which is cleraed from customs

    Hi Experts,
    I want to generate a custom declaration for the declaration which is cleared from customs.
    Is there any function module for this requirement.
    Please post your suggestions ASAP.
    Thanks
    Srinivas

    hi Srinivas,
    It’s not possible to create a new declaration for a declaration that is
    already accepted by customs. There could be below 2 possible options
    1. U need inbound cancellation messages in the respective activity sequence,
    and then u can request customs by mail or phone to send the cancellation
    message. Once the cancellation message is received document gets cancelled and
    u can create new declaration
    2. U need a new optional activity sequence that will have outbound
    cancellation message. once u trigger the cancellation message, customs will
    reply back with the cancellation confirmation message and u can create a new
    declaration
    Hope this helps...
    Regards,
    Santosh

  • Writing a custom renderer for the component  "af:processTrain" in 10g

    Hello,
    I have a requirement where we need to customize the way the af:processTrain is rendered. For this, the simpler and the more generic way would be to write a custom renderer for the af:processTrain component. Is there any documentation or examples that could help in accomplishing this as I could not get any relevant examples or documents.
    Thanks,
    Swapna

    Hi,
    Thanks for the quick response. Could you please suggest me a way to go about writing your own custom renderers?
    Thanks.

  • Latest Bios for the Z87 GD65 ??

    Okay guys/gals, i'm wondering what is the lastest bios for the Z87 GD65
    I see the offical site has version Version 1.B Date 2014-07-21
    Here in the forum we have Version 1B2 Date 29-July-14
    any Ideas ??

    1.B official and latest version

  • I need a new Bios for the MSI k7n2 L!!!!!!!!

    I need a new bios for the MSI k7n2 L, because i need more voltage for the MIcroprocesor and more voltage for the DDR.
    Anybody know if exist some bios BETA or something,
    And when MSI will release the New bios for this mother?
    Thank for respond
    Sory for my english
    N7.net | SebaS

    I hope you find one...(doubtlfully tho)....alot of people would like to have what you asked for......
    One question why do you feel you need more voltages?
    Is the system unstable?..........or do you just want to overclock more?

  • Custom BIOS for GT60-ONC

    Hi, is it possible to have an unlocked BIOS for GT60 ONC that allow CPU and DRAM tuning ?
    Basically I would a BIOS that allow the same things that on desktop motherboard, dram timing, frequency adjustment, CPU frequency and things like vt-x or hyper-threading activation.
    Also is there some features that can be tuned on the VGA card from BIOS ?
    I read on a post that you have a custom EC that handle better fans, is it possible to have it also ?
    Right now I have :
    EC : 16F3EMS1_T16
    BIOS : E16F3IMS.10U

    Quote
    Also is there some features that can be tuned on the VGA card from BIOS ?
    only for onboard GPU, not for dedicated/discrete nvidia card.
    Quote
    Hi, is it possible to have an unlocked BIOS for GT60 ONC
    yes its possible to be unlocked, about all new unlocked options how they and will they work do not depend of me.
    can be done also add on intel storage fw update
    Quote
    I read on a post that you have a custom EC that handle better fans, is it possible to have it also ?
    yes its possible, but you need to be more detailed of your target descriptions

  • [REQ]Custom fully unlocked BIOS for MSI GT70 0NC-008US

    I would appreciate a custom modified fully unlocked BIOS for this notebook please.  Donation already sent.
    BIOS Version: E1762IMS.10C
    Build Date: 04/26/2012 10:05:17
    EC Version: 1762EMS1 Version 4.05
    EC Build Date:  04/03/2012
    Thank you in advance.

    Couldn't reply to the PM.  Just flashed and everything went well (after 1 hour and 45 min of memtest86+ running lol).  Thank you very much for your help.

  • Request custom BIOS for MS-1762 - 937-176262-072

    Hello, i attempted to perform a BIOS flash with the MSIHQ tool that indicated that it was a successful flash but it still showed the current/previous E1762IG6.70O rather than the E1762IMS.10U (advised to use from Devil Tech for the GT70 0NE i have a GTX 675MX 2GB) what BIOS is compatible with my machine or do you guys recommend a custom BIOS? I did remove ac and battery for more than 5mins after flash. Many thanks much appreciated! благодаря Svet!
    MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
    MSIHQ: Report generated in 12/08/2013 at  0:04:41.61
    Mainboard:  MS-1762
    PCB Version:  REV:1.0
    BIOS Version: E1762IG6.70O
    BIOS Date:  10/08/2012
    EC-FW Version:  (NOT OUTPUTTED BY MSIHQ BUT SHOWN IN BIOS AS: 1762EG61 ver 5.01)

    what's the problem with your current BIOS?
    or are you looking for latest one for your notebook?
    Quote
    EC-FW Version:  (NOT OUTPUTTED BY MSIHQ BUT SHOWN IN BIOS AS: 1762EG61 ver 5.01)
    yes reading is disabled for non supported units
    Quote
    but it still showed the current/previous E1762IG6.70O rather than the E1762IMS.10U (advised to use from Devil Tech for the GT70 0NE i have a GTX 675MX 2GB)
    that's crossflashing, because of this it refuse to change it.
    i will ask MSI later today/tonight for latest bios for your barebone unit,
    and will give you if there is newer one available than your current
    Quote
    or do you guys recommend a custom BIOS?
    this one has no connection with the question, the custom one will be based on some of official one.

  • Custom bios for msi GE620DX

    Hi, can a custom bios be made for the GE620DX that can disable the "GPU Boost Technology" and force the use of the discrete nvidia GT635m instead? Also can it be modded to change the BLCK and voltages of i7-2670QM and allow changing the fan speeds? (I would like to undervolt/overclock).
    Thank you
    John

    Quote
    that can disable the "GPU Boost Technology" and force the use of the discrete nvidia GT635m instead?
    there are options to disable IGP and other kind of customizations,
    however disable IGP will probably cause black screen because IGP is need to be able dedicated card to operate.
    Quote
    Also can it be modded to change the BLCK and voltages of i7-2670QM and allow changing the fan speeds? (I would like to undervolt/overclock).
    voltage no. BLCK eventually yes, but its not guaranteed that the option will works properly.
    FAN speed no, as this is controlled by EC

Maybe you are looking for

  • No connection between soundbooth and extendscript toolkit 2

    I would like to control soundbooth using extendscript toolkit 2. From extendscript I can make a choice to connect to extendscript toolkit 2 itself, to Bridge CS3 and to Soundbooth CS3. Bridge and Extendscript connections work OK but conncetion to Sou

  • My search bar disappeared. how do i get it back?

    The search bar on safari home page disappeared. How do I retrieve it?

  • SBA 8.0 (Hor) to SBA 8.0 (Ver) Industry Application Post Upgrade Problem!

    Hi All, I am testing out an upgrade from Siebel 8.0 (Horizontal) to Siebel 8.0 (Vertical) version. Post upgrade after GUI Fixes, i did a full compile of siebel_sia.srf! But, after i start my Siebel Services & try to access the Sales or High Tech Manu

  • Where can I find Export/Import scripts?

    Hello, I have read in Oracle9iAS Portal Export/Import document about these scripts: secexp.csh contexp.csh pageexp.csh, but I can't find them.....can you help me? In which directory are they? Thanks in advance.

  • Pass cluster through DLL to Teststand

    I have to pass  Time Stamp & number thr'  a cluster in a DLL to Teststand thts  generating error  System Level Exception.[Error Code: -17502]  the Cluster ProdOrder(in pic ) is generating Issues Attachments: clustertoDLLpass Error.PNG ‏149 KB