Custom bonded warehouse plant

hi
in case of import under custom bonded ware house plant
i do
1) PO in bondedwarehoue plant
2)GR in same plant
then after STPO i m transfering to original plant by paying duty.
But before placing order i dont know whether material will go in custom bonded ware house or directly come to my plant
it is not fessible to raise all import po in bonded warehouse plant due to less volume of such bonded warehouse tranction.
so is it possible to raise import po in original plant instead of bondedwarehouse plant but i should be able to track custom bonded ware bouse qty.
please.....
Reg
Roc

hello pankaj..
thanks for ur prompt reply
after doing this ist it possible that i will pay to foriegn vendor from original plant instead of warehouse plant as there should not be any financial entry from warehouse plant bcoz my client dosnt want bondedwarehouse to come in balance sheet.
Thanks in advance
roc

Similar Messages

Custom Bonded Warehouse & Import Customs Duties inventorised

Hi all,
i have created a bonded ware house plant and transferring the material from the bonded warehouse to other plant by the following way.
ME21N - Create STO (in Main Plant, Supplying Plant as Bonded Warehouse Plant)
Here in this PO, maintain all the Import Duties;
JCDB IN:Basic Custom Duty
JCV1 IN : CVD
JECV IN : Ed Cess on CVD
J1CV IN : H&SECess on CVD
JEDB IN : Ed Cess on BCD
JSDB IN : H&SECess on BCD
JADC Addnl Duty of Custom.
Miro done first for the paying the customs duty to the govt.
351 movement carried out.
in the accounting documnet, all the excise duties are loaded on the material. my case is i want only the customs duty to be loaded on the material not the cvd, ecess on cvd.
How to proceed further. kindly help me out
Reg
Vikas
Edited by: Vikas Mayekar on Apr 24, 2009 12:07 PM

Hi Vikas,
I am facing the same problem of CVD amounts are uploading on to the material value in transfer posting from bonded warehouse plant.
can you explain the process of the CVD amounts are not to be uploaded on to the material value in transfer posting from bonded warehouse plant.
Regards,
Venkat

Excise capture in S TO of Custom bonded warehouse

hi all,
i have created a bonded ware house plant and transferring the material from the bonded warehouse to other plant by the following way.
ME21N - Create STO (in Main Plant, Supplying Plant as Bonded Warehouse Plant)
Here in this PO, maintain all the Import Duties;
JCDB IN:Basic Custom Duty
JCV1 IN : CVD
JECV IN : Ed Cess on CVD
J1CV IN : H&SECess on CVD
JEDB IN : Ed Cess on BCD
JSDB IN : H&SECess on BCD
JADC Addnl Duty of Custom.
Miro done first for the paying the customs duty to the govt.
351 movement carried out.
in the accounting documnet, all the excise duties are loaded on the material. my case is i want only the customs duty to be loaded on the material not the cvd, ecess on cvd.
How to proceed further. kindly help me out
Reg
Roc

Hi Rakesh,
could you please explain , how you solved this problem ? I am facing exactly same problem. I have posted the problem on forum also.
Thanks in Advance
Regards,
Vikas

Creation Bonded Warehouse Plant without Value updation

Hi,
My client requirement is he is importing the goods into Customs Bonded Warehouse without payment of duty. He wants to track the quantity details and he will sell the goods from Bonded Warehouse through Bond Transfer. Some times he will transfer the goods to his Manufacturing Plant.
How to address this in SAP
Regards,
Sriram

Hi Sridhar,
I don't have much information on the process you're trying to engage. But you can always create a free transfer PO and then the material documents.
Are you aware of the financial implications of having stock transfers and no financial documents related?
You can always use movement 561 and manage a dummy account in OBYC.
Regards.

Bonded Warehouse

Dear Gurus,
I have created bonded warehouse as a plant. I place PO on this Plant w/o taking any duties in this...Later i make an STO from bonded warehouse to Manufacturing Plant...For STO i created one pricing procedure taking Custom duty, CVD etc...
Next how to do JIiEX?? should i create bonded warehouse plant as excisable???
I dont know how to proceed to take CVD credit..How to post excise invoice etc..
When usually PO for imports is done dummy tax code V0 is put...but in STO where to put this TAX CODE when i am taking import duty in pricing procedure of STO??
Please guide me .. its urgent ..
Regards,
Rohan

Hi Ramakrishna,
Thanks for your reply. I need to explain whole thing please tell me whether am going in right way.
Customizing
1) Created Document type ZUB.
2) Created Pricing Procedure specially for STO taking Customs into consideration and other duty.
3) Customer created for Receiving Plant
4) Assigned that customer to sending plant( Dummy Port Plant).
5) Whether the Dummy Plant created should be excisable. Or if its not excisable its ok?
6) Any precautions to be taken?
rest as you said.... Am i correct?
Regards,
Rohan

Bonded Warehouse Scenario

Hi All,
we are facing the following problem in the bonded warehouse scenario ;-
1.) We are raising the PO from the bonded warehouse plant to the foreign vendor
2.) After receiving the mateiral in the bonded warehouse, we are paying the foreign vendor , but not paying any duties to the custom offcie.
3.) Whenever the material is required , we are making the Stock transfer order and for this purpose we have created seperate pricing schema ,which includes all Import duty conditions.
4.) Then we are doing the MIRO against this Stock transfer order.
5.) Issue of the mateiral from the supplying plant by using the movement type : 351 in the transaction MB1B.
Now the issue is while issueing the material by using movement type 351, all the import conditions are going to the inventory
6.) After this capture and posting of the excise duty in the J1IEX without any reference of the Purchase order .
7.) and then doing the GRN by doing MIGO with the reference of the stock transfer order.
Please validate the above process and suggest the way out , how we can restrict the import duties(CVD,ECS on CVD and Shecess on CVD ) to get inventerise.
Thanks & Regards
Nitin

Hi
You can maintain Bonded W/H as an External Storage location of your company and in Customization, you can maintain diff address for this sto.location.
When you import and keep the material in Bonded W/H, you can receive the material in 103 M.Type as Non Valuated.
In this way any time you can track the material by quantity basis.
When you pay the actual duty and release the material from the Bonded W/H, you can release it by useing 105 M.type.That time only it should get valuated.
With Regards
S.Baskaran

Stock in bonded warehouse to consider in MRP

We are bonding some of imported consignment in custom bonded warehouse. It is being ex-bonded whenever it is required in factory unit for consumption.
When we run MRP , system recognises only stock maintained in factory. We want stock maintained in bonded warehouse to consider in MRP run. This will give us proper clarity & will throw requireemnt only when it is required after considering stock at factory as well as stock in warehouse
Can we have resolution for the same
regards
AnandG

You can achieve this with creating "scope of planning" in OM0E or special procurement keys
[MRP multi plants|http://help.sap.com/saphelp_46c/helpdata/en/f4/7d2d4d44af11d182b40000e829fbfe/content.htm]

Import (bonded warehouse)

hi gurus,
Can any one tell me,how to map IMPORT under bonded ware house.
Regards
ROC

Hi,
For this you have to create Bonded Warehouse as a Plant.
When you create Import PO, create for Plant of Bonded Warehouse. In this PO don't maintain any Import Duty in this PO, only maintain CIF Base Price. Here follow the below process;
1. ME21N - Create Import PO in Plant Bonded Warehouse
2. MIGO - GR w.r.t. Import PO
3. MIRO - LIV w.r.t. Import PO
Now once the materials are in Bonded Warehouse Plant, you can transfer material from Bonded Warehouse Plant to Main Plant and then you are liable to pay the Import Duties. Here follow the below process of STO to transfer and pay the Import Duties to Customs Office.
1. ME21N - Create STO (in Main Plant, Supplying Plant as Bonded Warehouse Plant)
Here in this PO, maintain all the Import Duties;
JCDB IN:Basic Custom Duty
JCV1 IN : CVD
JECV IN : Ed Cess on CVD
J1CV IN : H&SECess on CVD
JEDB IN : Ed Cess on BCD
JSDB IN : H&SECess on BCD
JADC Addnl Duty of Custom
And assign the vendor code of Customs Office for all above condition types.
2. VL10B - Outbound Delivery from Bonded Warehouse Plant
3. MIRO - Customs Invoice Entry
Here following Entry will get posted;
Customs Office Vendor - Cr
CVD Clearing A/c - Dr
CVD Clearing A/c - Dr
CVD Clearing A/c - Dr
CVD Clearing A/c - Dr
Customs Clearing A/c - Dr
Customs Clearing A/c - Dr
Customs Clearing A/c - Dr
4. J1IEX - Capture BOE
5. MIGO - Goods Receipt w.r.t. Outbound Delivery (Here also refer Customs Invoice)
FI Entry will be;
Stock A/c - Dr
GR/IR Clearing A/c - Cr
Customs Clearing A/c - Cr
6. J1IEX - Post BOE
Here FI Entry will be;
CENVAT Input BED - Dr
CENVAT Input ECS - Dr
CENVAT Input SECess - Dr
CENVAT Input ADC - Dr
CVD Clearing A/c - Cr
Note: -
To configure STO Pricing;
Go to SPRO > MM > Purchasing > Purchase Order > Define Document Types > Here select "UB" and copy to a new PO Doc type.
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (New One) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
Also include above mentioned Import Duty conditions in Pricing Procedure RM2000 in M/08

Bonded Warehouse-Import duties

Dear All,
We have created a bonded ware house plant and transferring the material from the bonded warehouse to other plant by the following way.
1.) ME21N - Create STO (in Main Plant, Supplying Plant as Bonded Warehouse Plant)
Here in this PO, maintain all the Import Duties;
JCDB IN:Basic Custom Duty
JCV1 IN : CVD
JECV IN : Ed Cess on CVD
J1CV IN : H&SECess on CVD
JEDB IN : Ed Cess on BCD
JSDB IN : H&SECess on BCD
JADC Addnl Duty of Custom.
2.) Miro done first for the paying the customs duty to the govt.
3.) 351 movement carried out using Transaction code : MB1B
4.) in the accounting documnet, all the excise duties are loaded on the material. in our case,we want only the customs duty to be loaded on the material not the cvd, ecess on cvd. as it is required to take the cenvat credit for the same.
5.) while doing the MIGO against the stock transfer order, system is not asking the reference of the Custom MIRO document.
Please suggest , how to proceed this scenario.
Thanks & Regards
Nitin Chhabra

Dear Nitin,
Judging from my knowledge of EC customs law, I don't think you will be able to fully map a bonded warehouse, i.e. the entire customs procedure, in SAP ERP. The main obstacle in my opinion is that the system doesn't distinguish between goods still under customs supervision and goods released for free circulation. For the system, stock transfer from plant to plant is thus basically a logistics issue. It doesn't recognize the customs and tax debt that arises at the moment you remove stock from your bonded warehouse.
Best regards,
Christiane

Bonded Warehouse: Cannot create Customs Declaration

Does anyone have any experience with Bonded Warehouse that they could help with the following?
I have setup Bonded Warehouse in GTS, but am unable to create any Customs Declarations from the PO/Goods Receipt. After creating the PO, Delivery, and Goods Receipt in R/3, I am able to see the corresponding entry in the "Display Customs Declaration/Goods Receipt Quantities" report in GTS, however it does not appear in the "Display Assigned Logistics Documents from Worklist" and I cannot create the Customs Declaration for it.
Does anyone have any ideas that could help with this? Thanks!

Hi Tom
This one is a fairly old thread that you had initiated. I am now in a similar situation in our project where we are trying to configure CWH and are not able to create customs declaration. The worklist shows the status as 'Customs declaration not needed'. Did you find any way out on this issue you faced? Please let me know.
Regards

Shipping Reports for Bonded Warehouse/ Bonded Warehouse to Customer

Does anybody create or develop Bonded Warehouse Report in Bydesign System. please let me know?,
Sr. No.
BE No. (warehouse)
BE Date
BE No. (Exbond)
BE No. (Exbond)
BE Date
Cont. No.
Net WT
Total WT
Import Agency
Charges
Bonding Agency
Charges
Maersk Line
Maersk Line
Detention
Stamp
Sr. No.
BE No. (warehouse)
BE Date
BE No. (Exbond)
BE No. (Exbond)
BE Date
Cont. No.
Net WT
Total WT
Import Agency
Charges
Bonding Agency
Charges
Maersk Line
Maersk Line
Detention
Stamp

Carolyn,
We had a similar situation on a previous project, the solution we wrote was to auto pack the delivery on creation. You then have 2 main options:
1. Print a label per HU in the delivery or
2. Run a subsequent splitting routine to create 1 HU per delivery and print a lable per delivery.
We chose the later as we were interfacing with DHL (amongst others) and each HU was a single parcel that we needed to PGI and generate a delivery note for.
Now the client had some specific requirements so this got into a big ABAP module but that is an area to look at.
Hope this helps a bit
Howie
Message was edited by: Howard Mair

Capturing of credit on CVD in STO between a bonded warehouse and Manuf plnt

Dear experts
We have two plant A and B .Plant A is a bonded warehouse wherin material comes in without paying customs duty or CVd etc but in some cases when material is removed from this warehouse we need to pay import related duties.Another plant B is manufacturing plant.both plant are under the same company code.Now we want to move material from plant A to B through STO. So we created a STO for plant b as supplying plant A, containing condition type Basic Customs duty,CVD ,Additional customs duty and Cess on CVD etc. then creted delivery and Post good issue.Now in the receiving plant B we first posted the Customs MIRO and when we are going to post MIGO with Excise duty no value is flowing to Excise tab neither no pop up is shown to put the customs MIRO.We want that CVD condition is flown to BED field in excise tab at item level.Sytem is throwing some error like 1)Maintain Vendor for the excise invoice 2)Please check excise base for the item is zero.can you tell us where are we going wrong? we have maintained all the master data in J1id and maintain plant as vendor for the plant and customer for both the plant.
Thanks a lot of your response in advance

Hi,
Appreciate the quick response.
I have actually copied my import Schema & then created a STO schema with CVD conditions, so all the acct key & accrual key settings are the same.
Anyhow I have checked the same once again & the accruals keys assigned to the Cenvatable conditions have G/L assignment in OBYC.
Can you please send the standard Bonded Warehouse Process & how duty credit is availed in receiving plant with ref to the STO document?
Note:
I check using SD route also with delivery & 641 mov. But in that case also the CVD components are getting added to the inventory.
Thanks & Regards,

Bonded warehouse & stock valuation

Hi,
Scenario :
Goods come from foreign supplier to bounded warehouse and are kept there for some time. Document currency is u20AC or $. Over some time users issue request for custom clearance for part of goods and customs officer custom cleared part of goods (here must occur valuation of goods in domestic currency for exchange rate for custom clearance) . And after quality inspection goods are free for sale.
I was thinking about implementing 2 plants in SAP:
plant1 - bounded warehouse , plant2 - sales warehouse
1. PO for 100 pc to supplier in u20AC
2. GR for all quantity (100 pc) to bounded plant1
3. Supplier Invoice for full quantity and amount - (cannot wait for custom clearance as in most cases goods must to be payed before custom clearance)
4. Stock transport order for 50 PC with custom clearance amount as additional condition (request for custom clearance)
5. **Goods issue from plant1 with MvT 351 - stock value to sales plant is going to be MAP50+custom clearance amount ***
6. Entering invoice for custom clearance
7. Receiving with mvT 101 custom cleared goods to plant 101
Step 5 is step where valuation is lost. In step2 and 3 first valuation occurs with exchange rate1. There can be months before step 5 and exchange rate can change a lot.
Ideal will be that stock is valuated while on bonded warehouse in ordering document currency and valuation to domestic occurs while custom clearing.
Is there solution in standard SAP to this problem?
One of "solution" can be that users enters vendor invoice for each custom clearance for quantity custom cleared (but that can lead to problem of payables as users will then basically use Goods receipt as base for payment (posting date from GR and payment terms from PO will create due date, and GR amount in foreign currency will be amount)). Does anybody have such case in company - one physical invoice entered part by part in system .
Best Regards,
Neno
Edited by: nenokov on Mar 8, 2011 4:39 PM

You can achieve this with creating "scope of planning" in OM0E or special procurement keys
[MRP multi plants|http://help.sap.com/saphelp_46c/helpdata/en/f4/7d2d4d44af11d182b40000e829fbfe/content.htm]

CVD Credit in Bonded Warehouse Scenario

Dear All,
I have configured a STO scenario from Bonded Warehouse to manufacturing plant. I want to avail the duty credit on CVD when I receive the goods in the manufacturing plant.
Following is the process which I am following
1. Create STO with Supplying plant as Warehouse Plant with all the duty values such as (Customs duties & CVD)
2 BOE by manufacturing plant for Customs Vendor to clear the goods
3. GI using 351 mov. against STO document.
When I do the GI using 351 mov. all the duty values are getting added up to the inventory in the receiving plant (Including the CVD amount)
Hence please advice how to restrict the CVD value from adding on to the inventory ?
Note:
I have gone through many threads in SDN where people have mentioned that the above scenario has been solved but I was not able to find a solution for the same.
Thanks & Regards,

Hi,
Appreciate the quick response.
I have actually copied my import Schema & then created a STO schema with CVD conditions, so all the acct key & accrual key settings are the same.
Anyhow I have checked the same once again & the accruals keys assigned to the Cenvatable conditions have G/L assignment in OBYC.
Can you please send the standard Bonded Warehouse Process & how duty credit is availed in receiving plant with ref to the STO document?
Note:
I check using SD route also with delivery & 641 mov. But in that case also the CVD components are getting added to the inventory.
Thanks & Regards,

Your experience in handling bonded warehouse in SAP

Our Client (Wholesale distributor of alcoholic beverages) is using Bonded Warehouse to receive imported alcoholic beverages. As with most distributors, the recommendation for Product pricing at this client is to use a moving average approach. The plan is to use the u201CTotal purchase priceu201D, which is defined as (PO price + inbound freight (if freight is arranged by client) + taxes (federal, state and excise taxes) applied at the time of purchase), for the calculation of the moving average price. However, if alcohol is received into a u201Cbonded warehouse locationu201D (physically within the same warehouse building but segregated), taxes are not applied until the inventory is moved from the u201Cbonded warehouse locationu201D to the u201Cregular warehouseu201D. u201CBonded warehouseu201D and u201CMain warehouseu201D are 2 storage locations within the same plant. They are not 2 separate plants. While we can manage the u201Ctotal purchase priceu201D based on whether we are receiving into a bonded warehouse location or not, there are 2 open questions
u2022Is there a way to separate the inventory value of the bonded inventory from regular inventory other than using split valuation functionality?
u2022Is there a way to update inventory value by the tax amount when we move product from the bonded warehouse to the regular warehouse using transfer posting?
We would also like know the best practices and how do other companies handle bonded warehouse in SAP. Any help you can provide us would be great.
Thanks,

-Within the same plant, I dont think there is any way to segregate Inventory valuation without using split valuation
- If you want to add custom duties to the inventory value, you can go for STO between storage locations, your STO doc. type wil have the pricing procedure attached . The pricing procedure will have the full calculation schema including CIF , Custom duties ,CVD etc. you can pay the duties (custom MIRO) before dispatch and the accounting entries at time of PGI will load the duties on inventory.
if u use normal MM 311 transfer posting, then u ca'nt add any values to stock. (unless u go for some Z dev and Post MR21 in background .., which id not recommend)
. Normally bonded warehouse is handled by creating a separate plant .
Is the Bonded warehouse also a RG23D registered Depot? (does your client have an importer distributors license?)
also , in case of alcohol, is the duty treatment similar to excise ./CVD in other products? or does alcohol have some separate levies?
if its a RG23D depot, then you will need to create excise and series groups accordingly.

Custom bonded warehouse plant

Similar Messages

Maybe you are looking for