Custom Brush in color?

Hello Folks,
Is there a way to create a custom brush in photoshop with a multiple color shape? ( for instance you draw an ice cream cone with multiple colors and convert that to a brush )
The idea is to grab that custom brush and click to draw or paint the multiple color shape by just clicking once. The clicking draws or paints that complete shape in color on the spot that you click.
Thanks in advance for your help!
Bill

Thanks for the reply Jeffrey.
Does anyone know of any other software that does this? ( besides adobe illustrator ).

Similar Messages

How do I make a custom brush image in a gradient color scheme in Photoshop Elements 12?

I want to make a custom brush image in a gradient color scheme. I know how to change the hue jitter, but I want to "paint" the image with a gradient between two colors. For example, I have an image of an octopus that I have used to create a custom brush. I want the top of the octopus to be hot pink and gradually fade into a deep orange at the end of the tentacles. Everything I've looked up just colors the background. Thanks in advance!

Try the following:
Open the octopus image
Open a Gradient Map Adjustment layer above this. There are several preset gradients, but in my version of the program I don't see one with pink to orange.
When you double click on the gradient bar in the Adjustments palette, this will open up the Gradient Editor, where you can tailor the gradient to your specifications with color and opacity stops. (see below)
This will apply the gradient to the entire picture. However, the adjustment layer has a built-in mask (the white rectangle).
Left click on this and paint with a black brush to hide the gradient outside of the octopus. If you go too far, you can correct with a white brush.
Now, as to the Gradient map adjustment layer, here is how to configure it:
http://retouchpro.com/tutorials/?m=show&opt=printable&id=132

How can I tell which custom brush I have applied to a line?

I've created some custom brushes in Illustrator CC 2014 and applied them to various lines.
Is it possible to know which brush I've applied to a line (like you can see what color a line is by viewing the Color or Swatches Palette). When I activate the stroke the Brushes Palette just sits there, not highlighting anything.

artracer,
Look at Stroke in the Appearance palette.

Custom Brushes

I've downloaded and installed a bunch of free custom brushes from the Internet along with a few brushes I made. It is often difficult to know what the free ones will look like until fully installed.
I am looking for a way to select a bunch of them and delete them from my brush list. So far, I am only able to delete one at a time. I tried shift-clicking and Control-clicking to get multiples, but no luck. Any suggestions?
I'd also like to reorganize them so my favorite texture brushes are in one group and all my rough brushes in one group of brushes. (not physically a "group", but just placed side by side in the list). Is there a way to click and drag them around inside the list?
Lastly, It would be nice to color code my favorite brushes or brush styles, similar to the way you can color code actions. Is this possible?
I am working towards cleaning my brush set up and saving them to a brush set I can save and recall. So far, I am selecting a brush I like, then clicking an open spot at the bottom of the list and letting PS add the new brush with a new name. At that point, I am deleting the old one out of the list.
Any advice would be appreciated.
M. Jackson

I have about 400 brushes sets in my Presets>Brushes folder.
When I go to Preset Manager in an attempt to install one of those sets, the resulting list only shows the set numbers through the letter B.
How can I see the rest of them?
I don't want to install all of them at one time, I just want to be able to choose all of the sets.
How can I do this? I already have Presets Viewer so I know which sets I want to load, I just can't see them in order to load them.
Thanks in advance!
Linda
Edit added 10/22
One workaround that I have considered is to load all of the ones that I can see, remove them from the presets>brushes folder, load another batch, remove those, and so on.
Will removing them from the presets>brushes folder cause them to disappear from the available brushes in Presets Manager?
The downside of this is, of course, having way too many brushes to look through.
Alternatively, perhaps I could creat subfolders in Presets>Brushes, one for brushes starting with numbers, one for brushes starting with A, etc?

Setting up Custom Brushes and ToolSets

I created a custom panel using configurator. In that custom panel I created a pop-up panel button, but the pop-up panel button doesn't trigger a pop up panel ? I want the pop up panel to have two tabs one to save custom brushes and custom tool settings, and those panels which save custom tool brushes and custom tool settings, saved with the custom panel.
The results is the custom tool panel that I created with the custom pop-up can be loaded into photoshop as a extension with the custom tool brushes and custom tool settings along with it, so it's not tied directly within photoshop but rather with the extension, I hope I made myself clear.

Hi,
When you export Configurator panel to photoshop, it will generate a file named "untitle-1.mxi", this is the Extension Manager package template.
Open it with a text editor you will see this piece of XML
    <files>
        <file source="content" destination="$panels/untitled-1"/>
    </files>
I think you can add something like these:
<file source="mybrushes" destination="$brushes"/>
<file source="mytools" destination="$tools"/>
The full list of the predefined variables can be found in file c:\Program Files (x86)\Adobe\Adobe Photoshop CS5\Configuration\XManConfig.xml
This is a list:
    <VariableForExMan>
        <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
        <Data key="$photoshopappfolder">$installfolder</Data>
        <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
        <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
        <Data key="$platform">Win</Data>
        <Data key="$actions">$presetsfolder/Actions</Data>
        <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
        <Data key="$brushes">$presetsfolder/Brushes</Data>
        <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
        <Data key="$colorbooks">$presetsfolder/Color Books</Data>
        <Data key="$colorrange">$presetsfolder/Color Range</Data>
        <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
        <Data key="$contours">$presetsfolder/Contours</Data>
        <Data key="$curves">$presetsfolder/Curves</Data>
        <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
        <Data key="$duotones">$presetsfolder/Duotones</Data>
        <Data key="$exposure">$presetsfolder/Exposure</Data>
        <Data key="$gradients">$presetsfolder/Gradients</Data>
        <Data key="$huesat">$presetsfolder/Hue Sat</Data>
        <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
        <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
        <Data key="$layouts">$presetsfolder/Layouts</Data>
        <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
        <Data key="$levels">$presetsfolder/Levels</Data>
        <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
        <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
        <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
        <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
        <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
        <Data key="$patterns">$presetsfolder/Patterns</Data>
        <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
        <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
        <Data key="$scripts">$presetsfolder/Scripts</Data>
        <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
        <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
        <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
        <Data key="$styles">$presetsfolder/Styles</Data>
        <Data key="$textures">$presetsfolder/Textures</Data>
        <Data key="$tools">$presetsfolder/Tools</Data>
        <Data key="$variations">$presetsfolder/Variations</Data>
        <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
        <Data key="$workspaces">$presetsfolder/Workspaces</Data>
        <Data key="$zoomify">$presetsfolder/Zoomify</Data>
            <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
            <Data key="$lights">$presetsfolder/Lights</Data>
            <Data key="$materials">$presetsfolder/Materials</Data>
            <Data key="$meshes">$presetsfolder/Meshes</Data>
            <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
            <Data key="$volumes">$presetsfolder/Volumes</Data>
            <Data key="$widgets">$presetsfolder/Widgets</Data>
        <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
        <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
        <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
        <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
        <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
        <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
        <Data key="$automate">$pluginsfolder/Automate</Data>
        <Data key="$digimarc">$pluginsfolder/Digimarc</Data>
        <Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
        <Data key="$effects">$pluginsfolder/Effects</Data>
        <Data key="$extensions">$pluginsfolder/Extensions</Data>
        <Data key="$fileformats">$pluginsfolder/File Formats</Data>
        <Data key="$filters">$pluginsfolder/Filters</Data>
        <Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
        <Data key="$importexport">$pluginsfolder/Import-Export</Data>
        <Data key="$measurements">$pluginsfolder/Measurements</Data>
        <Data key="$panels">$pluginsfolder/Panels</Data>
        <Data key="$parser">$pluginsfolder/Parser</Data>
            <Data key="$3dengines">$pluginsfolder/3D Engines</Data>
        <Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
        <Data key="$matlab">$photoshopappfolder/MATLAB</Data>
        <Data key="UserExtensionFolder">$photoshopappfolder</Data>
        <Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS5/Configuration</Data>
        <Data key="DisplayName">Photoshop CS5 32</Data>
        <Data key="ProductName">Photoshop32</Data>
        <Data key="FamilyName">Photoshop</Data>
        <Data key="ProductVersion">12.0</Data>
        <Data key="IconPath">Configuration/PS_exman_24px.png</Data>
        <Data key="SupportedInSuite">CS5</Data>
        <Data key="HostNameForCSXS">PHSP</Data>
        <Data key="Bit">32</Data>
    </VariableForExMan>

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
David Miller
[email protected]

How to transfer Painter 12 with my custom brushes from old iMac to a new iMac both running Mavericks

Hi,
I just purchased a new iMac. Have Painter 12 on my older iMac and want to be able to transfer Painter 12, with my custom brushes to my new iMac. Tried Airdrop but got a message that it was damaged and that I should trash it. Does any know how to get Painter 12 with all my custom brushes to my new machine? Both are running Mavericks.
Thank you,
Jim

etresoft,
Thank you for your response. I did try to use Migration Assistant and I got as far as the two machines trying to communicate with each other. So I guess the answer to your question would be I tried, I failed and it worked until a certain point. I understand that there are other ways to connect the machines, I would have to see if I have the proper cables to do so. Airdrop did get data to my new machine and that tells me that they do see each other on the network. I do not know why they did not see each other via Migration Assistant. I assume that I could go to Corel's site and download Painter 12 to my new machine, ( my new machine does not have a disk drive ), but I will not have my custom brushes etc. and would have to totally make them up in the fresh install version and I am trying to avoid that.
You are probably correct in saying that Painter 12 probably needs a full reinstallation to work properly. Am I to assume that Migration Assistant will do a full reinstallation, including my custom brushes? I guess I am a little confused here.
Jim

Custom brushes in Flash like Photoshop?

I just started using Flash for my animations and I want to ask if one can create custom brushes in Flash like Photoshop?
Also I imported an embeded video avi into Flash and I want to reduce the opacity of the video so I can create a new layer over it and draw over the frames with the video as reference.I dragged the movie into the stage and converted to movie clip and reduced the opacity but its not showing on the stage when I go to the part of the video I want to draw over.
I use Flash CS3.
BTW,why isn't the bucket tool & selection tool like Photoshop?It makes shading colours problematic?or is it because its vector?

I was not able to access the mc inside the scroll pane with the code:
TweenLite.to(mc_pane2.content.scrollpaneBckgrnd_mc.FloraLytell_btn, 1,
I had to explicitly specify that it is the mc I am accessing inside the
scroll pane, otherwise I was getting errors:
TweenLite.to(MovieClip(mc_pane2.content).scrollpaneBckgrnd_mc.FloraLyt ell_btn,
1, );
That's OK. It's because ScrollPane::content is of a type DisplayObject. DisplayObject does not contain property named scrollpaneBckgrnd. MovieClip, however, is a dynamic class and enables you to (try to) access virtually any property you can imagine. If it doesn't exist in your particular instance of a MovieClip, you'll get an runtime error.
P.S. If you have time can you briefly tell me why is there a line of code
in your sample:
mc_pane2.update();
ScrollPane::update() measures your content and sets scrollbars accordingly, if needed.
Can it be changed with the size specified for the mc_pane2:
mc_pane2.setSize(556, 300);
what would be the major difference between them?
They definitelly don't do the same. ScrollPane::setSize() sets size of your scrollpane If you get same results using one or the other function, it's because your content is smaller than 556x300px and you don't need scrollbars so in this particular case ScrollPane::update() would "do nothing".

Moving custom brushes from Pshop CS5.5 to CS6

Is it possible to move custom brushes from Pshop 5.5 to 6? When I choose Load in 6, I can't even open the Brushes folder in 5.5
Will 5.5 brushes run on 64bit?

Thank you for your professional response. You may be using a different Mac platform than I and all the Mac users I know. When I have Pshop open and search to transfer/load brushes, Finder does NOT appear in the Menu bar.... only the Apple icon and Pshop menu commands. The Apple icon is not the Finder.
When I'm out of Pshop on the Desktop, which THEN displays Finder in the Menu bar, then there is NO way to transfer/load brushes into Pshop.
Therein lies the ambiguity of your initial response.
As you can see by these screen captures, the Rec Brush I created in a tutorial using 5.5 (first three images - v5.5), does not appear (fourth image - v6) when I attempt to Load it into 6 Brushes out of v5.5. Yet the Flames (SS) brushes (second, third, fourth images) I downloaded from a site DO appear and I was able to transfer them.
The Load process (in v6) is not recognizing the CUSTOM brush (generated in v5.5) for some reason...

How to Keep Custom Brushes in the Brush Panel Flyout Menu?

So I have a set of brushes that I mostly commonly use. However, I still use other brushes on occasion. When I load those brushes, my custom brush set doesn't stay in the flyout menu and I have no choice but to find the brush file and reload it. Every time.
It's getting to be a pain in the butt, so I'm wondering if there is a way to permanently keep your custom brush set in the flyout menu of the brush panel I've attached a screen shot in case what I wanted wasn't quite clear! I want my custom brushes to go where the green area is point.
Also I'm running a Japanese version of PS, but I'm pretty sure almost all the menu places remain the same. I translated some of the menu (although it might not be the exact same as the US CS6, but if you give me instructions, I'm pretty sure I can figure it out!)

Thanks! You're a life saver
iPhoneから送信
2014/10/31 16:16、R_Kelly <[email protected]> のメッセージ:
How to Keep Custom Brushes in the Brush Panel Flyout Menu?
created by R_Kelly in Photoshop General Discussion - View the full discussion
Looks like you using mac os x?
There are two places you can put your brush presets file:
1. /Macintosh HD /Applications/Adobe Photoshop CS6/Presets/Brushes
2. /Users/User Name/Library/Application Support/Adobe/Adobe Photoshop CS6/Presets/Brushes
The difference is that the ones in the cs6 application folder show in your red area and the ones in the library show up below the red area with a separator line
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6886054#6886054
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Brush Preview Color

I am using Photoshop CS4 for Windows. I thought if I check animated zoom in Preferences>General, and select a brush preview color in Preferences>cursor, I could Alt+Click+Drag and not only see my brush changing size, but with color. It's not happening. Is it supposed do do this, or amu I doing it wrong?
Thanks!

photofanman wrote:
Hey thanks John. I think I had tried that but quite as soon as I saw the
eyedropper. Also, my GL wasn't enabled for some reason.
If your video card won't support OpenGL, Photoshop will disable it.

Where can I modify my custom brushes in Photoshop CS2?

HI all,
So I'm trying to make a custom brush. I have my brush defined from a Photoshop document. But I cannot find the settings for that brush. How can I adjust the scatter and spacing? Am I missing a menu or Settings pane?
by the way, I'm running Adobe Photoshop CS2 on Windows 7 Professional.
Thanks!
Alex

Window>Brushes

Do you keep all your plug-ins, customized brushes etc when you upgrade to creative cloud?

I'm looking into the creative cloud subscripion, I currently use CS5 photoshop. Do you keep all your plug-ins, customized brushes etc when you upgrade into creative cloud subscription?

I'm looking into the creative cloud subscripion, I currently use CS5 photoshop. Do you keep all your plug-ins, customized brushes etc when you upgrade into creative cloud subscription?

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I hav

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head. Todd gets a blurred dark tone pretty much regardless of the options he uses.
IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt. I would not choose to use the Patch tool in this situation. Content Aware Fill makes a better stab at it.

Feature Request - Custom Brushes

Am I alone in thinking Fireworks is lacking a custom brush feature?
It's one of the only reasons I feel like I need to go into Photoshop these days.
Any word on features in CS5? This would be a definite upgrade for me if so.

I think it's an excellent idea and have been hoping that this would be incorporated into any new version of Fireworks.
You can always make your wishes be known by filling in the 'Wish Form' at:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Custom Brush in color?

Similar Messages

Maybe you are looking for