Custom Brushes not showing up in photoshop

So recently i went on a brush downloading spree and downloaded around 10 brushes. I saved these brushes under Adobe>Adobe Photoshop CC 2014>Presets>Brushes. But these brushes dont show up in photoshop unless i click on them and personally open them. Any idea why this happening guys..and maybe a fix?
Thanks in Advance

Did you load them into Photoshop using the preset manager or in brush preset pallete you can use them?

Similar Messages

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements? [tags]

Why when using Adobe Bridge, I apply a star rating, the rating does not show up in Photoshop Elements. I use Elements as my organizer and Bridge to view as it is much more user friendly. Anyone any solutions??

Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

Font not showing up in Photoshop CS4 for Windows

I have fonts that I've installed in both my Windows XP and Windows 7 PCs. They show up in the Control Panel - Fonts and open, they show up in Word, but do not show up in Photoshop CS4. I see in the CS4 Mac forums that there is a way to register a font in CS4, but I can find nothing on doing that on a Windows PC. Can anyone help?

Adobe programs are sensitive to font issues, and one, the Titler in Premiere, is the most sensitive. This ARTICLE was written primarily for Titler, BUT translates to PS too. Often, a corrupt, or poorly-designed font will crash Titler, where that same font will usually just fail to display in PS, though it might cause hangs. Tracking down the problem font is outlined in the above article.
However, even if a font is not corrupt, or bad, it just might not display properly in some Adobe programs. I found that Isabelle and Isabella (two different fonts, with similar names) and from several foundaries, just do not display in Photoshop, or Illustrator. They do not crash the program, or cause a hang, but they obviously have an issue, and just will not display. They also do not crash Titler, but do not display.
Other fonts, such as the older DejaVu, installed with OpenOffice, would crash Titler. I do not have that font, but do understand that Oracle has rewritten it, so that it now works OK.
Good luck, and it could well be that your problem font(s) can be replaced by a better one, that has similar characteristics, or can be replaced by the same font, but from another foundary.
Hunt

CR2 FILES FROM 5D MK 3 not showing in CS5 PHOTOSHOP / BRIDGE. any thoughts ??

CR2 FILES FROM 5D MK 3 not showing in CS5 PHOTOSHOP / BRIDGE. any thoughts ??
CANNOT edit or view CR2 RAW FILES.
works fine with Canon 5d mk 2....

Yes, hopefully all you need to do is go to Help>Updates in photoshop cs5 and get camera raw 6.7

CC Bridge slow-. adjustment brushes not showing size, adjustments when done blind are slow to react

I am running Imac 2.7 GHz    16 gb ram    600 gb hard drive available
adjustment brushes not showing size, adjustments when done blind are slow to react.

Bridge is far more than a file browser.   Bridge does what lightroom does.
When working with Raw files, there are tools,   **adjustment brushes** that allow you to dodge and burn raw files.
These brushes are size adjustable and now with CC, I can not see the size of the tool I am using.
So you might want to look at Bridge differently, as it is a very powerful tool.
Anyone else have a similar experience with CC version of Bridge?

Payment from the customer is not showing in the lockbox transaction.

Hi all,
When i execute transaction code FLB1, I could not able to find lockbox and customer did the payment but it was not reflected in sap.
Payment from the customer is not showing in the lockbox transaction.
Please suggest and gide me with solution what could be the reason i am not awear of lockbox process.
Regards,
JC
Edited by: jcnaidu on Sep 17, 2010 6:41 AM

The messages are getting to the recipient...
I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
--prd54usa

Customer information screen not showing when installing photoshop CS2 -- cannot enter serial number

I own Adobe Premier CS2. When I run photoshop installation, customer information screen is not showing. So I cannot enter serial number. I have serial number.

CS2: Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Downloaded brushes not showing on right click drop-down list

I have recently reinstalled Photoshop cs5.1 and ran into a problem. My installed brushes are not showing up on my right click drop-down list. I took the old brushes and copied the folder to the new location. When I go to use these brushes there used to be a big drop down list when I right click anywhere on the canvas. It now only shows the basic brushes, but here is the thing though I can load and see them through the preset manager but they are not on my drop-down list like they were before I reinstalled.
I have noticed something odd as well this may help in the solution I have noticed that some files from Photoshop are saved on to my second hard drive, but I do not know if this is the cause.
The reason I reinstalled is my GPU acceleration wasn't working and had to reinstall to fix this. If any other information is needed I would be glad to share. This is just cutting into my workflow time since I have to load every single brush singlely and if I load them all I have to search through every single brush to find what I need.
Thank you!

I found a solution to my problem it may help others! I run Windows 7 64-bit this has two seperate folders for applications when installed. I did a windows search for one of the names of the available brushes on my right click list. The search showed me where the brushes were at. (Example: I searched in windows: DP Brushes) Aparently photoshop normally installs as a "32-bit" program in this location, C:\Program Files\Adobe\Adobe PhotoShop CS5.1\Adobe Photoshop CS5.1 (64 Bit)\Presets\Brushes it is here that I copied my new brushes to and it showed up again. Hope this helps anyone who was in my situation!

Custom Genre Not Showing Up In Apple's Music App [02/20/2015]

Hello, I have the iPad mini 2 Model: A1489 16GB @ iOS 8.1.3
I have made 2 custom genres that show up just fine in the Genres tab with every song belonging to these respectable genres. I also have 'Instrumental' and 'Piano' genres that I'm not sure if qualifies as custom genres, but they work well too.
However, my latest custom genre 'A Cappella' is not showing up with the rest of the genres. The 1 album that I have for this genre shows up in the Albums tab and the songs show up in the Songs tab. The album also shows up after selecting the artist in the Artists tab, but does not show up in Genres.
There are 2 songs in this genre, but they are my favorite and I want to be able to get to them quickly. ^.^
The genre does show up in iTunes, Windows Media Player, and the Meta Data is all there when I look at the properties of the files. I can't seem to find out what other differences the working genres' and the non-working genre's songs have except that they have different genres.
Every song on my Ipad has the same Artist. <<<<(If that helps....)
Thank you for your help, whoever helps.

This may be an issue with the ID3 tag format standards and Apple can't change those. But you can ask:
https://www.apple.com/feedback/ipad.html

F-26 Customer code not showing on clearing document

Hello,
I usually run transaction F-26 to do customer clearings.
I dont know what happened for this customer that when I simulate the clearing document the customer line disappear.
The document is cleared normally but the customer code line item does not show on the clearing document (type "CM"-cheque)
PS: When I run F-26 I insert any bank account and amount 0.00 just to specify the document numbers on "additional selections"
I dont know why this happened just this time. I´ve analyzed customer master data on XD03 but I dont know if its something related to this.
What else could I check ?
Thanks,
Alex

Hi Kyoko,
I agree with you that system probably is working as intended, and also I don't think F-26 is the ideal transaction for this. Probably F-13 is more appropriated.
Anyway, the 2 documents for customer "Y" are with zero balance clearing too (the same as customer "X") but the customer line item appears on the clearing document.
We usually run F-26 to clear more than 2 customers also. We inform the document numbers on additional selection.
So I still need to know why the item line for customer "X" did not appear on clearing document
Regards,
Alex

Uploaded custom, theme not showing in repository

I have copied a existed theme_4 from images/themes/theme_4 to them_200.
when i am trying to export the same from repository, that is not showing in the list..
I have followed the below steps to create new custom theme
1) in images/themes/theme_4 copied the theme_4 directory to theme_200 direcotory
2) changed the CSS files, as per our requirements.
3) should export the them_200, changed one (not showing in repository list) currently stuck
4) after exporting the theme_200.sql , need to replace t4 and etc.... with t200 etc
5) importing the changed one into repository.
currently i am stuck with step 3, can you please help me on this...

1) I copied from theme_4 to Theme_200.
2) I have followed the steps from the below link.
http://rianne.andama.nl/blog/index.php?option=com_content&view=article&id=101:custom-themes-oracle-apex&catid=20:oracle&Item
Now I am trying to export the theme_200, but theme_200 is not visible in the list of themes to export.

Custom icons not showing up in installer dialogs

What are the steps that are required to get a custom icon to show up in the installation dialogs?
I have custom icons setup in the application descriptor xml file for my app... and they do show up in the OS after I install the application but I don't see the icon showing up in the install dialogs.
Any ideas why the custom icons are not showing up in the installation dialogs?
Here is what TweetDecks installation dialog looks like... (this is what I want)
Here is screenshot of what my installation dialog looks like...

You need to sign your app with a certificate that chains up to a trusted root certificate. In general that means you need to get a cert from verisign or someone like that. If you get the friendly warning dialog on the first installer screen rather than the scary one with lots of red x's, you should then see your image

Icc profile not showing up in Photoshop

hi- I downloaded an ICC profile from an online printer that I want to use in Photoshop CS3 so my images appear properly for their output. I placed it in Library/Adobe /Color/Profiles and restarted Photoshop but it does not show. What am I doing wrong?

Ramon look, if it says the downloaded ICC profile is shortrunposters.icc and you place it in the folder listed as such and it appears like that when you look at it in the folder and then when you go to the actual profile list (which happens to be over 100 profiles) and you don't see shortrunposters.icc where the heck are you supposed to look and what are you supposed to look for?
It turns out it is Xentilcle version3.icc now how would I or anyone else know that? The creator of the profile originally said "you need to go to an Adobe site to find out the problem because it isn't us", well excuse me I think it was their lack of identification of how the profile shows up.

Video and/or sound will not show in Adobe Photoshop 12 for m2ts files.

I have just added Adobe Photoshop 12. The m2ts videos will either: 1) not show with a black screen and have video; or 2) will show but have video for only 30 seconds. HELP! I've read the forums, and I've tried everything I could find as suggested. Nothing fixes BOTH issues. I'm ready to return product and go back to 8.0.

Sometimes it pays to munch the video file through the Adobe Media Encoder app, even if it's going to come out in the same format as before. This app is free and gets installed along with Captivate but you can also download it from the Adobe website. It seems to make videos compatible with Captivate.

ProRes Setups in Custom Settings not showing up as Easy Setups 7.0.3

Having trouble on a client's workstation:
We have all of the "Additional Setups" copied into both the
"HD>Library>Application Support>Final Cut Pro System Support>Custom Settings"
as well as the
"USER>Library>Preferences>Final Cut Pro User Data>Custom Settings"
folders, but several of them do not show up at all in the Easy Setups dropdowns.
Why is this, and how do I fix it for them?

Best support for FCP I've found are here...
http://discussions.apple.com/forum.jspa?forumID=939&start=0
http://forums.creativecow.net/applefinalcutpro
Have you tried trashing prefs? (thanks to Jon Chappell and the folks at Digital Rebellion)
http://www.digitalrebellion.com/prefman/
On last upgrade/update of FCP, did you do a full Archive/Install, or did you use Migration Assistant or upgrade/update directly over an existing installation?
You might click on 'My Public Profile' at top right of this page and fill in some system specs...helps us help you.
K

Custom Brushes not showing up in photoshop

Similar Messages

Maybe you are looking for