Custom Camera Raw settings not being recognised after copying to another mac

Images captured on MacBook Pro and custom settings applied in Camera Raw, images then transferred to Mac Pro via USB are opened on Mac Pro using Adobe Bridge CS6, Camera Raw doesn't recognise the custom setting and opens using the setting used last time in Camera Raw.
How do you retain the custom settings when transferring images and opening on another mac, the files are CR2 and the xmp files are also copied as well.

...and you did copy the xmp files as well as the RAW files to the second computer?

Similar Messages

  • Batteries not being recognised after update!!

    My OS seems to be messed up! I updated my battery while running on 10.4.3, and it asked me to remove battery and plug it back in and restart.
    I did that, but now my battery is simply not recognised??? I tried plugging in the other battery but that too is not being recognised! Though both batteries run and I am able to use laptop without powerchord.. but once the battery runs out, i need to plug in powerchord and this does NOT charge the battery.
    This is bad, as now I have 2 batteries which are not recognised after the update!?? I even tried updating to 10.4.4. Doesn't help!

    Got it.
    Try running the firmware update for the battery again.
    The first couple of times I tried the firmware update failed. With the firmware update window open but in the "didn't work" mode, remove the battery and replace it and then hit the update button again. Took a couple of times but I got it to work, the computer recognized the battery and all is smiles again.
    Jim
    Two, 15" pb's
    Two, 17" pb's
    G5
    Imac

  • Since upgrading to Firefox 4.0 Norton IS site logins no longer work, even though they are running, they do not auto load. Is FF not being recognised after the update ?? ??

    Normally when i open FF the Norton IS login manager kicks in automatically and completes all the various site logins.
    '''However '''since the update to FF4, even though Norton IS 2011 is running the login manager is not working, it's as if FF4 is not being recognised as my browser any longer.
    There must be a fix for this; if not i'll be forced to revert to the previous version of FF
    New'ish system i3, Win 7, MS Office, Norton IS 2011, Firefox 4.0

    You are almost correct in your assumption Norton needs updating to FF4
    You can get Firefox 3.6.16 here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox

  • Custom Adobe print settings not being saved as a default

    We're trying to print pdf labels from a website to either a Citizen CLP-521 or a Zebra GK420d using a custom label size and settings. This works fine when printing from the local PC the printer is connected to. However as soon as we share the printer and try and print from another PC we have to select all of the settings everytime which is time consuming. On the locally connected printer PC each time it is rebooted we have to select the label printer as it goes to the default printer. Subsequently we have to select the custom settings which are then saved until the PC is rebooted. However on the other PC's we are having to select the printer and the custom settings everytime. This is very time consuming when we're trying to print 150 labels each day!
    We've tried with different versions of Adobe reader, 7, 8 and 9 loaded on Windows XP Pro SP3. Tried changing various settings in Acrobat but still no joy.
    Has anyone else experienced this problem or got any ideas on how to resolve this issue?

    Uninstalling iTunes and quicktime from your PC does not erase songs you have on your PC nor does it erase the iTUnes Library File. When you do uninstall it iTunes leaves all your songs alone and it leaves behind the iTUnes Library inside the "iTunes" folder. So when you reinstall iTUnes the library is already in place
    More info about the library file can be found here
    http://docs.info.apple.com/article.html?artnum=93732
    Also reinstalling iTUnes will reinstall quicktime too. there both bundled together

  • Ipod not being recognised after updating software on it

    i bought the ipod some 3 months back and it worked fine all these days until 2 days back when i connected it to my friend's computer to use it as a disk.
    A dialog box popped up as soon as i connected the ipod saying i could either update or restore the software on the ipod....i chose update and then when i connected the ipod to my computer again,it was not recognised by the system or itunes....and though the space which was earlier filled was still occupied,i couldn't find even a single playlist in the ipod when i tried to use it... i gather that the files are still in the ipod,but somehow i am unable to view or use them.plz help me in this regard
    compaq   Windows XP  
    compaq   Windows XP  

    I have the same issue, have you found a solution?
    no...i am still looking for help regarding this issue

  • BlackBerry ID not being recognised after battery removal

    Hello all! Hopefully you can help me with this one...
    Happybday:That battery in my Blackberry Torch was not holding a charge for any substansial amount of time and in troubleshooting this, I removed my battery and SIM card. When I replaced these and turned the phone back on, it requested that I input my Blackberry ID details - according to the screen I have inserted a new SIM Card (which I have not). Despite these being correctly entered, the response was something along the lines of "the details entered do not match a valid BBID" However, I have signed in and out of my BBID account on my tablet with the exact same details without issue. I have reset my password to no avail. 
    I first contacted my service provider who directed me to contact Blackberry, however the phone number they provided me with was incorrect. 
    So now I am at a loss! Any suggestions?

    mdouglas wrote:
    Hello all! Hopefully you can help me with this one...
    Happybday:That battery in my Blackberry Torch was not holding a charge for any substansial amount of time and in troubleshooting this, I removed my battery and SIM card. When I replaced these and turned the phone back on, it requested that I input my Blackberry ID details - according to the screen I have inserted a new SIM Card (which I have not). Despite these being correctly entered, the response was something along the lines of "the details entered do not match a valid BBID" However, I have signed in and out of my BBID account on my tablet with the exact same details without issue. I have reset my password to no avail. 
    I first contacted my service provider who directed me to contact Blackberry, however the phone number they provided me with was incorrect. 
    So now I am at a loss! Any suggestions?
    Hi @mdouglas! Welcome to the BlackBerry Support Community Forums!
    Since you changed the password of your BlackBerry ID, the account is now unrecognizabe by the device. You need to perform a secut\rity wipe to be able to login using your new BB ID credentials.
    *Note: Performing a security wipe will delete all of your data, having a backup is ideal. See this KB for instructions on how to perform  Security Wipe:  KB14058
    Goodluck!
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • Can not save dashboard after copying to another location

    Hi All,
    I am moving a dashboard to another location and trying to make some changes but when I click on save button nothing happens, "Saving" text appears, page busy gif appears, thats all. I've waited long enough but no change. This occurs only on one page of the dashboard. The original dashboard page works fine but the copied one is not saving.
    Sometimes I get the error;
    There was a problem retrieving the response data:Unknown (12030)
    Ay idea would help. Thanks.
    Ganim

    hi,
    Use catalog manager to copy from one location to other location
    and check in preserve the old item name while copying from one location to other.
    Regards,
    VG
    http://mkashu.blogspot.com

  • After updating ios my ipad is stuck in recovery mode and is not being recognised by the computer in windows or itunes.  Help!

    Help - I am stuck in Afghanistan on operations and my iPad mini has died.
    I tried to update the IOS as directed, there were a few error messages and I cancelled the process.
    The ipad now only shows the connect to itunes screen and is not being recognised by the computer in either windows or itunes.
    I have tried several resets and restarted the computer and reinstalled itunes.
    Is there anything else I can do.
    This is my only method of talking back to my family at the moment and is really quite important.
    JS

    Thanks, I will give it a go. Will it work on my computer after I do that?
    Jez

  • Can not find folder to load camera raw presets on MAC.  I have searched and says to drop in the library/application support/adobe/camera raw/settings folder but I do not have this folder or can no locate it. I get as far as lib/appsupoort/adobe/camera raw

    I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am not trying to add some presets to my  ACR but when I search for the folder to place them it is not there.  From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks

    You want your user library
    Mac(user)/Library/Application Support/Adobe/Camera Raw/Settings
    In finder click on Go then hold down the Option key and then click on Library

  • My FaceTime camera is not being recognised why? and how can i fix this problem

    I had this program called vdcassistant and apparently its a virus so I removed it and now my FaceTime Camera is not being recognised can someone please tell me how to fix this, and i have no time machine back ups

    Reinstall Facetime application.
    Check system profiler for your inbuilt iSight camera by looking at Hardware > USB > Built in iSight.
    Perform an SMC/PRAM reset:
    SMC RESET:
    Unplug all cables from your machine including the power cable. Hold the POWER button for 10 seconds.
    Plug all cables back in and boot machine.
    PRAM RESET:
    Locate COMMAND+OPTION+P+R Keys.
    Turn on the Machine.
    Hold down these four keys.
    Until you hear the startup sound for a second time.

  • Camera Profiles not being installed after adding .dcp files to a CameraProfiles folder.

    Hi fellas, recently I downloaded some camera profiles for my Nikon D7000 and Sony RX100MII and added to CameraProfiles folder which can be found under Application Support folder on my mac. However when I open my lightroom and go to Lens Correction those camera profiles would not show up in the option at all. I shoot with RAW, so I don't think format is the root of the issue here. This is my first time trying adding Camera Profiles so I might be making some very fundamental mistakes. I would appreciate any kind of advices, thank you very much.

    See the instruction below for the location where your profiles should be placed. If they are placed in the same folder where Lightroom install package places the profiles created by Adobe they will not be recognized.
    Your custom Camera Raw & Lens Profiles should be installed to the User folders…
    Lightroom 5 no longer uses the shared ProgramData (Windows) / Application Support (Mac) folders for Camera or Lens Profiles. Instead, it stores the built-in profiles with its program files.
    When you create camera or lens profiles, they must be stored in the user locations listed below. If you previously stored custom profiles in other locations, you’ll need to move them to these user folders, otherwise Lightroom won’t be able to find them.
    Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
    Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
    For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.
    The camera and lens profile file extensions are:
    .dcpr—camera profile recipe file used for creating/editing a profile in the DNG Profile Editor
    .dcp—camera profile
    .lcp—lens profile

  • Message states that Camera Raw is not enabled after transferring data to a new MacbookPro

    Using photoshop and Bridge CS6.
    When I attempt to open a photo in Camera raw I receive this message Camera Raw is not enabled.
    "Camera raw requires that a qualifying product has been launched at least once to enable this feature.

    had to wipe and reload

  • IPhone 3G not charging and not being recognised by PC

    I plugged my iPhone 3G into my laptop today to charge it, as the battery was extremely low and for some reason, it's not being recognised by my computer at all, and it's not charging at all.
    I've tried plugging it into a powerpoint in the wall as well, and it still doesn't charge.
    I plugged my iPod into my computer with the same USB cable, and it worked fine.
    If I hold in the power button at the top, the battery picture comes up with a tiny bit of red in it and the power cable -> charge pictures come up underneath, then the screen just goes black again.
    I've never had this problem before, so I'm not sure what to do.
    Any help would be greatly appreciated.

    I had the same problem after the upgrade, but think I may have a solution. The problem doesn't seem to be that the phone isn't charging, it's that the indicator isn't showing that it has charged. Try this:
    1. Plug into the wall socket.
    2. Push and hold the power button, you should get a "slide to turn off" kind of message -- do it.
    3. Let the phone power off, and leave it that way for a slow count of ten.
    4. Turn it back on by pushing and holding the power button -- you'll get that black screen with the apple logo, don't panic, it just takes a minute to power up, you haven't lost anything.
    When it came on, the indicator showed it was fully charged from the night before. My concern is that the indicator got hosed by the upgrade.
    Try that out, let me know if it works -- and at your own risk. It worked for me as written, but I can't guarantee that will do the trick or not wipe your phone. I don't think so, it seems innocuous enough, just wanted to make sure you're aware there could be another resynch needed if it does do something else for you.

  • Nokia X6 16GB not being recognised by PC Suite/OVI...

    Hi,
    I bought my Nokia X6 16GB around november...the phone was working fine and was able to connect to PC as Mass storage device.
    2 days back when i tried to connect to OVI suite to download maps...my phone was not being recognised by OVI suite/PC suite. But i can still connect it as Mass Storage Device.
    I browsed through other posts...and tried eveyrthing...i.e... I tried uninstalling PC SUITE, OVI SUITE, Connectivity Cable Driver,etc...Removed all entries from registry!....Tried reinstalling again all these to my PC....Reformatted by Mass Storage in the Phone. Tried resetting to factory settings....but no luck!
    Also under USB connections in the mobile, i get only 4 options...
    1. OVI Suite
    2. Mass Storage
    3. Image Transfer
    4. Media Transfer
    I dont see any PC Suite option.
    Also whenever i connect the phone to the PC...i get a found new hardware wizard with the following message.
    Cannot install this Hardware
    There was a problem installing this hardware
    Nokia X6-00 USB Phone Parent
    An error occurred during the installation of the device.
    The system cannot find the file specified.
    Nokia Ovi Suite 3.0.0.290
    Nokia PC suite 7.1.60.0
    PC Connectivity Solution 10.50.2.0
    Connectivity Cable Driver 7.1.36.0
    Operating system: Microsoft Windows XP 32-bit Edition, Service Pack 2
    Pls help at the earliest...really spend a lot of time to fix this issue....my last option is hard reset...which m not eager to do!...is there any other way out?
    Attachments:
    nokia err msg.JPG ‏30 KB

    had this problem after doing a hard reset on my x6, pc suite and ovi suite would not recognise phone.
    The solution above worked great although i had to restart the pc after repairing drivers for it to connect.
    reason for hard reset was because the screen kept going all washed out/scrambled every now and then tho could get it back to normal after playing with lock button. hard reset did not fix this issue which i am still having.

  • Adobe Camera Raw changes not reflecting in Premiere Pro

    I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
    I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
    That's alright though, I would much rather use Adobe Camera Raw!
    Right click > Edit Original
    There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights. 
    PERFECT, click DONE!
    Nothing...For whatever reason, changes are not reflecting.
    Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow.  I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
    Thank you for your time.
    -Loyal Paying Customer

    Hi Ekombokom,
    ekombokom wrote:
    Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
    Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
    ekombokom wrote:
    Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
    Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
    That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
    ekombokom wrote:
    I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
    You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
    Thanks,
    Kevin

Maybe you are looking for