Custom Category in Template Chooser

When I open the template chooser I'd like to be able to have category folders for my templates. I have quite a few for work and it would be nice if they could be sorted by category as opposed to the name of the template.
The iWork manuals suggest that you can do this by creating a new folder in the "Templates" folder. But when I do this I can't see the templates in the template chooser at all....
If I create a folder and add it to the "My Templates" category I can see the templates in the template chooser under "my templates" despite the fact that they are in their own folder(s) within the "My Templates" folder.
I'm not having any problems saving templates. I'm good with that. But I'd like to see my own categories within the template chooser....
Any suggestions??
-John

You can add folders to categorize your templates in Pages but, unfortunately, not in Numbers. I suggest you leave feedback for the Numbers team regarding this. You can find it under the Numbers menu > Provide Numbers Feedback.

Similar Messages

I have several custom templates in the my templates/templates chooser. How do I remove and/or delete them.

I have several custom templates in the my templates/templates chooser. How do I remove and/or delete them?

Hi Muizen,
Your remark that Yvan's "remarks are completely useless to (you)" may be correct, but that's hardly his fault.
Your question was posted in the Numbers community, a place for discussions of issues and techniques specific to the Apple spreadsheet application Numbers, part of the iWork set.
This community is one of several at the Apple Support Communities site, a place for discussion of technical issues specific to Apple hardware and software.
Your question regarding removing unwanted templates, posted in the middle of a discussion of Numbers templates (with a side trip to templates made with Pages, the word processing and page layout application that is also part of the iWork set) contained no reference to any application other than Numbers having produced those templates.
Yvan may have added 'unclearness' to your understanding of the issue, but the origin of that unclearness is your initial post. In case you've forgotten it, here is that post again, quoted in its entirety:
"Hi Edgar,
I am struggling to remove custom templates that I don't need.
The advise is:
Use the Finder to navigate to the templates and send them to the trash. Look in:
Username/Library/Application Support/iWork/Numbers/Templates/My Templates.
However after Application Support iWork does not show up.
Do you have a solution?"
Where in that post do you make it clear that the custom templates you are talking about are "MS Word" templates? Where do you even mention that fact?
In your most recent post you state: "I tried this approach but reported that there is no iWork in my system."
Actually, you did not report "there is no iWork in (your) system,"t. You did report that "iWork does not show up" when you followed the path given.
You had made no mention to that time that iWork was not installed on your computer, and the fact that you had posted a question about removing templates in a forum(and in a discussion thread) specifically for one of the iWork applications would lead any reasonably intelligent reader to assume that the application was on your computer, and that, like the other users in this discussion, you were asking about Numbers templates, or at least about templates for one of the iWork applications.
Given that assumption, and given that the supplied path was the correct path to a user's custom templates for numbers, the most likely explanation of iWork's name missing from the path would be the one Yvan assumed—a misstep by the user at the beginning of the path.
Regards,
Barry

Custom File Renaming Template Keeps Changing

I'm having issues when creating a custom file naming template in Tiger with LR 1.3.1.
When importing files, I created a custom template to rename the files with YYMMDD_{original file suffix}{Master}.tif to get this: 071217_12056Master.tif. The first import goes fine. But when I import another batch of files and choose the template all I get is 071217_Master.tif.
I tried creating the template by hitting F2 to rename the photo and get the same results. The really odd thing is that some of the other templates have their characteristics jumbled around so that what I thought was the "orig file-name" template might actually produce something like 071217_.tif.
The original file suffix suffers the worst in terms of disappearing without cause. This behavior was occurring in the 1.2 ver. as well. I've deleted every single template thru the editor, recreated them again and still get the errors.
Hopefully someone here can provide some clues?
Thank you!

It sounds as though your import preset either isn't working or wasn't setup correctly.
Using the full screen import panel, make sure Copy or Move is selected and then select your Import Preset....what does the File Renaming panel look like? "Rename Files" should be ticked, Template should read "Custom Settings" (or the specific rename preset if you've saved it) and the sample should show the correct rename format, like so:
So does yours look like this, or different?

Pages will not launch in template chooser.

Preferences is checked to launch template chooser, but launches documents files instead. I created another sign in name and it launches properly. How do I correct this problem in my account?
Thanks

Pages v4.3 on Mountain Lion 10.8.2. iCloud is on with Documents & Data enabled.
When I launch Pages, it presents with a file dialog offering available files based on the last setting for either On my Mac, or iCloud. If the former, it refers to the last folder location saved. If instead, I choose New document from the bottom panel of this dialog, Pages immediately opens into my blank custom template (configured in preferences). Otherwise, it would normally open to the Template Chooser.
If I choose Cancel from this preceding dialog, then I have access to the File menu:
New - directly opens blank custom template
New from Template Chooser... - as expected
Open Recent - as expected
Pressing shift+command+N pops up a Template Chooser window as expected. Template Chooser also appears at the bottom of the Pages menubar window menu.

Custom Content Presenter Template gives Empty result

Hi All,
I am Using Jdev 11.1.1.6 and am trying to display UCM content via a custom template using content presenter.
I have a page with the following:
<af:region value="#{bindings.doclibcontentpresenter1.regionModel}" id="r1"/>
The bindings for the content presenter taskflow:
<taskFlow id="doclibcontentpresenter1"
taskFlowId="/oracle/webcenter/doclib/view/jsf/taskflows/presenter/contentPresenter.xml#doclib-content-presenter"
              activation="deferred"
              xmlns="http://xmlns.oracle.com/adf/controller/binding">
      <parameters>
        <parameter id="taskFlowInstId" value="${'photo'}"/>
        <parameter id="datasourceType" value="${'dsTypeQueryExpression'}"/>
        <parameter id="datasource"
                   value="#{backingBeanScope.NewsBean.photoContentQuery}"/>
        <parameter id="templateCategory" value="${''}"/>
        <parameter id="templateView" value="${'templates.photos.list'}"/>
        <parameter id="regionTemplate" value="${false}"/>
      </parameters>
</taskFlow>
And the photoContentQuery bean method return result of the Query i.e SELECT * FROM ora:t:IDC:GlobalProfile WHERE ora:p:xRegionDefinition = 'PHOTO_REG_DEF' AND ora:p:xArchiveFlag<>'No' ")
I have a fragment with the portal resource attributes set as:
Category name = Default Templates
Category ID = oracle.webcenter.content.templates.default.category
Category Default View = true
View ID = templates.photos.list
The above fragment has this code: I also made this fragment has portal resource.
<dt:contentListTemplateDef var="nodes">
        <af:panelGroupLayout id="pnlContainer" layout="vertical"
                             >
            <af:iterator id="pagList" value="#{nodes}" var="node" >
                <af:panelGroupLayout layout="horizontal" rendered="false">
                </af:panelGroupLayout>
                    <af:panelGroupLayout id="pnlContent" layout="vertical">
                     <dt:contentTemplate node="#{node}"
                          view="template.photo"
                            nodesHint="#{nodes}"/>
                </af:panelGroupLayout>
            </af:iterator>
            </af:panelGroupLayout>
</dt:contentListTemplateDef>
and
<dt:contentTemplate node="#{node}"
                          view="template.photo"
                            nodesHint="#{nodes}"/> this is another pagefragment contains the following code.
<dt:contentTemplateDef var="node">
    <af:panelGroupLayout id="pgl2">
      <af:panelGroupLayout id="pgl1" layout="vertical" styleClass="photoImg">
        <af:outputText value="#{node.propertyMap['PHOTO_REG_DEF:PHOTO'].asTextHtml}"
                       id="ot1" escape="false"/>
      </af:panelGroupLayout>
    </af:panelGroupLayout>
</dt:contentTemplateDef>
When I run my project on the Integrated WebLogic Server and when I click on my page, the data is coming empty.
When I see the Administrator console, this content presenter template is in Hidden by default. I just edit the template and made it availabe. But still am unable to get result in the required template.
On my page, if I do not specify the <parameter id="templateView" value="${'templates.photos.list'}"/>, then I will get the result with default content presenter template.
Could any one please help me out?
Thanks
Kotresh

Hi,
I am able to get the result with required custom content presenter template. But every time when I run the project , I need to explicitly need to make it "show" my custom content presenter display template i.e. in the Administration console, initially it is in Hidden state, I need to edit and make it show.
I already made this template as portal resource but why it is still be in Hidden state. what extra step do I need to make in order to move it to "show" state?
Thanks
Kotresh

Custom content presenter template - multiple items

I am having an issue with using custom content presenter template...
Here are the steps I took:
*1. I created a single item display template veventItem_CP.jsff*
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:dt="http://xmlns.oracle.com/webcenter/content/templates"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<dt:contentTemplateDef var="node">
    <af:panelGroupLayout id="pgl1" layout="vertical">
      <af:outputText value="#{node.propertyMap['dDocTitle'].value}" id="ot1"/>
    </af:panelGroupLayout>
</dt:contentTemplateDef>
</jsp:root>
and create a portal resource:
Content Repository Name: UCM
Content Type: IDC:Profile:Event
Content Type Default View: true
View ID: veventItem_CP
*2. I created multiple item display template veventsList_CP.jsff*
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:dt="http://xmlns.oracle.com/webcenter/content/templates"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<dt:contentListTemplateDef var="nodes" >
    <af:panelGroupLayout id="nodeListPanel" halign="left" layout="vertical" valign="middle" inlineStyle="text-align:left;">
      <af:iterator rows="0" id="i1" var="node" value="#{nodes}" varStatus="iterator" >
          <af:commandLink text="#{node.propertyMap['dDocTitle'].value}" id="cl1"/>
          <dt:contentTemplate id="listitem" node="#{node}"
                view="veventItem_CP"
                nodesHint="#{node}"/>
      </af:iterator>
    </af:panelGroupLayout>
</dt:contentListTemplateDef>
</jsp:root>
and create a Portal Resource:
Category Name: events
Category ID: *
Category Default View: true
View ID: veventsList_CP
*3. I drag and drop a folder from my UCM connection onto home.jspx and enter the following parameters into the binding:*
    <taskFlow id="eventsContentPresenter"
              taskFlowId="/oracle/webcenter/doclib/view/jsf/taskflows/presenter/contentPresenter.xml#doclib-content-presenter"
              activation="deferred"
              xmlns="http://xmlns.oracle.com/adf/controller/binding">
      <parameters>
        <parameter id="taskFlowInstId"
                   value="${'cd6c7cd6-2c74-4e6c-a711-a748d9abd0d8'}"/>
        <parameter id="datasourceType" value="${'dsTypeFolderContents'}"/>
        <parameter id="datasource"
                   value="${'AcqUCM#dCollectionID:133054394311000404'}"/>
        <parameter id="templateCategory" value="${'events'}"/>
        <parameter id="templateView" value="${''}"/>
        <parameter id="regionTemplate" value="${'false'}"/>
        <parameter id="maxResults" value="${''}"/>
      </parameters>
    </taskFlow> Then when I deploy the code the error I get is:
<TemplateRegistry> <getListTemplateViewId()> No default template view specified for category id 'events'. Returning the default view for the default category.

Hey Yannick,
I think you are mistaken...
I am using a contentListTemplate, and in the developer's guide it says to use the templateCategory for multiple-item content presenter templates. When I do what you suggested, my veventsList_CP doesn't work and the ADF default tempalte is used.
I accomplished what I needed to accomplish on the home page by re-writing my veventsList_CP to not use the nested template:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:dt="http://xmlns.oracle.com/webcenter/content/templates"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:f="http://java.sun.com/jsf/core">
<dt:contentListTemplateDef var="nodes" >
    <af:panelGroupLayout id="nodeListPanel" halign="left" layout="vertical" valign="middle" inlineStyle="text-align:left;">
      <af:iterator rows="0" id="i1" var="node" value="#{nodes}" varStatus="iterator" >
        <af:panelGroupLayout id="pgl1" layout="vertical"
                             inlineStyle="padding-left:10px; padding-top:10px;">
          <af:commandLink text="#{node.propertyMap['dDocTitle'].value}" id="cl1"
                          inlineStyle="font-size:small; font-weight:bold;"/>
          <af:outputText value="#{upcomingEventsBean.dates}"
                         id="ot2"/>
        </af:panelGroupLayout>
      </af:iterator>
    </af:panelGroupLayout>
</dt:contentListTemplateDef>
</jsp:root>
Now I need to make the commandLink direct to a content presenter display template that shows all of the event's metadata. I've done this before by using the default navigation model, but never programmatically. I will give it a try and report how it goes.
Edited by: ilovebuffets on Sep 19, 2011 11:42 AM

When I open Pages, Numbers the template chooser doesn't open, some other finder type window opens.

Any way to turn it back on after ML install? In preferences the template chosser is selected and can't be unselected.

I assume you've applied the iWork 9.2 updater as well as upgrading to Mountain Lion. By default, ML & iWork assume you want to open a file on iCloud. If you don't have an iCloud account you can turn this off by unchecking Documents & Data in System Preferences > iCloud. Otherwise, the easiest way would be to type ⌘ ⇧ N to bring up the template chooser.
Or it could just be that the preference files are corrupt, but it does seem odd that they would both do it at the same time.

When I open Pages the template chooser doesn't open even though i have chosen that in preferences

In Pages preferences, I have chosen to open the template chooser window, but for some reason when I open Pages, it continually opens in a finder type window and I have to choose "new document" and then I will get the template chooser window...is this correct?

Thank you so much, Picas! I was going crazy thinking I had corrupted some preference...I am new to Macs!

Custom report row template

Few questions when using a custom report row template. Followup to the discussion Report Row Template: Column condition
1. The row template allows full control how the entire row is rendered. I can see this being used when the report query returns a single row and we need to format it in a very specific way. But when the query returns multiple rows, how is the specified Row Template used? i.e the first row is "consumed" and rendered as per the template. If the same process is repeated for subsequent rows, how can we control whether successive rows are rendered across the page (left to right) or down the page (top to bottom)?
2. When a custom row template is used to render a tabular form, the hidden columns (marked Edit=Y, Show=N on Report Attributes) are present in the markup even when they are not specified in the row template! i.e. the MRU process works. Of course, this is a good thing but I was curious to know what exactly controls this, what part of the report template controls where the hidden form elements are placed?
3. Any number/date formatting specified declaratively on the Column Attributes page appears to be taken into account when column values are substituted in the template using #COL# notation. But all the other Column Attributes are ignored (alignment, sum, show, link, etc). Is there a way to use the Link attribute to declaratively specify the link so the value of the column #COL# as seen by the report template includes the A tag?
Thanks

Comments? Thanks

Change Sales Order category to custom category in CIF

Hi,
I am CIFing Sales Order from ECC to APO, as per my requirement I need to change the category of sales order for which their are no confirmation.
The Sales order get CIFed to APO in standard category BM and i want to change to custom category ZM
I am using a user exit EXIT_SAPLCSLS_002 to read the Sales Order in ECC and changing the Sales Order ATP category to ZM but I am getting an error that it does not match correctly.
but when I use a different standard category BL instead of ZM it works properly.
Has anyone used an user exit to change the Sales Order Category, can you please help?
Thanks & Regards,
Sanjog Mishrikotkar

Hi,
Please try the user exit EXIT_/SAPAPO/SAPLCIF_SLS_001 in APO. This will be called while transferring the Sales orders to APO and the category will be changed. Also maintain the category you are changing in APO.
Please look at the link for further details
http://help.sap.com/saphelp_scm50/helpdata/EN/8f/987337e68ae526e10000009b38f889/content.htm
Regards,
Sireesh

Pages 5.1 - Always asks to add to template chooser

Pages 5.1
I have templates created in folders from previous version. When i double click from folder to open it get asked to add to the template chooser or cancel, add to template chooser, yes great it goes there then i have to click again to open. If i then go to open this template again from the saved location it asks to add again, i do, and it has to replace the template now, i do, then i have to click to open again. If i click cancel during any of the process, yes its cancels. But i cannot simply open a template from a saved location without going in this procedure loop. How do i open a template from saved location, i want to simply double click to open?

Jerroid:
I followed your instructions and was able to save a template to a foulder on the desktop. However, the template on in the desktop foulder only opens after it is saved to the chooser, and that means giving a new name to the template in the chooser. This seem to be a needless circle, a duplication of effort and a problem the new Pages 5.1. Perhaps it will be corrected in the future. Thank you for your response - RI531

How do you open a new document from the template chooser?

Hi There,
Since upgrading to Yosemite, I can't find the option to open a new document from the template chooser. When I type in "template" in the help box it shows it under "file" But when I click on "File" I don't see that option.
Basically, I'm trying to ask how do you access the templates in the new pages?
Thanks so much

Check your preferences and make sure Show Template Chooser is selected:
Then just choose New from the File menu.

Custom Web Album Templates in Lightroom

I work for a department at UMass Amherst, and we're considering using Lightroom to create our web albums. We used the beta, and there was no way to create custom HTML/CSS templates (besides hacking the code it produced every time). Is this a feature that is included in the 1.0 release, or do you still have to hack the code every time?

Check out Sean's two posts
here. Have fun - it's all xml and xslt - and let us know how you get on.
John

Email Alert Template Issue - List Alerts (Alert Me) emails not using customized XML alert template

We have recently customized the XML alerts template (AlertTemplates.xml) for our site collection in SharePoint 2010 to exclude specific fields in the email when users who have subscribed using the "Alert Me" feature. We have renamed the
custom alerts XML file and loaded the custom template in the following directory (%ProgramFiles%\Common Files\Microsoft Shared\Web server extensions\14\TEMPLATE\XML) and restarted IIS. Once users subscribe to the alerts using the list "alert me"
function they received the customized email as intended.
We needed to auto-subscribe users to the email alerts so what we did was use a powershell script to add users to the alert subscriptions using the script shown below:
Import-Csv D:\Temp\filename.csv | ForEach-Object{
$webUrl=$_.WebUrl
$listTitle=$_.List
$alertTitle=$_.AlertTitle
$subscribedUser=$_.SubscribedUser
$alertType=$_.AlertType
$deliveryChannel=$_.DeliveryChannel
$eventType=$_.EventType
$frequency=$_.Frequency
$oldAlertID=$_.ID
$web=Get-SPWeb $webUrl
$testAlert = $web.Alerts | WHERE { $_.ID -eq $oldAlertID }
IF ($testAlert) {
$web.Alerts.Delete([GUID]$oldAlertID)
Write-Host Old alert $oldAlertID deleted. -Foregroundcolor Cyan
$list=$web.Lists.TryGetList($listTitle)
$user = $web.EnsureUser($subscribedUser)
$newAlert = $user.Alerts.Add()
$newAlert.Title = $alertTitle
$newAlert.AlertType=[Microsoft.SharePoint.SPAlertType]::$alertType
$newAlert.List = $list
$newAlert.DeliveryChannels = [Microsoft.SharePoint.SPAlertDeliveryChannels]::$deliveryChannel
$newAlert.EventType = [Microsoft.SharePoint.SPEventType]::$eventType
$newAlert.AlertFrequency = [Microsoft.SharePoint.SPAlertFrequency]::$frequency
if($frequency -ne "Immediate"){
$AlertTime=$_.AlertTime
$newAlert.AlertTime=$AlertTime
$newAlert.Update()
Write-Host Created $newAlert.Title for $subscribedUser . -Foregroundcolor Cyan
} ELSE {
Write-Host Alert $alertTitle for $subscribedUser already done. Moving on. -Foregroundcolor Magenta
When we ran the script and added the users and restarted the service, all users who were auto-subscribed via this method get the email without the customizations that were done in teh custom alert template. All users who manually subscribed on their
own to the list using the "Alert Me" function would get the customized email.
Does anyone know why users who manually subscribe to the alerts get the customized email, and users who were auto-subscribed using the powershell script do not get the customized email and get the standard generic email template?

Hi ,
According to your code, it create a new alert using SPUser.Alerts.Add() method. For this method, it will create a new alert based on the predefined alert template by default.
If you only assigned the custom alert template to the list, users who manually subscribe to the alerts get the customized email, but users who were auto-subscribed using the PowerShell script get the standard
generic email template.
For your issue, you can set the new alert ‘s alert template:
http://social.technet.microsoft.com/Forums/en-US/1b19c12f-fc37-48cf-8b59-6c09f095dc23/custom-alert-email-templates-issue-list-alerts-emails-not-using-customized-xml-alert-template?forum=sharepointgeneralprevious
Here is a good blog you can have a look:
http://blogs.msdn.com/b/sharepointdeveloperdocs/archive/2007/12/07/customizing-alert-notifications-and-alert-templates-in-windows-sharepoint-services-3-0.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

My templates are not always showing up in template chooser

When I click on numbers all of my templets do not show up in "My Templates"
When I click on the templet it tells me it is in the Template Chooser do I want to replace it.
Are there two different places Numbers is saving items?

It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
Note that this can't happen if your iPhone is not connected to a WiFi network:
When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
from here: http://support.apple.com/kb/ht4106

Custom Category in Template Chooser

Similar Messages

Maybe you are looking for