Custom Composed Look not appearing in Change the Look with custom color palette

Hi,
I created custom color palette, (which was a copy of one of the out of the box ones) and uploaded it to the Themes folder under a different name. I then went to the Composed Looks and created a new Composed Look(using the New
Items), which the seattle master page, and the new color palette that I created. 
When I go to Change a Look, the new Composed Look does not appear as part of the options.
When I change the color palette of the Composed Look, to one of the out of the box ones, I see it I the Change a Look page.
What am I doing wrong?
Thanks

I would check two things. First, did you check in the spcolor file you created? Second, I would review all of the properties of your composed look found in "/_catalogs/design/AllItems.aspx". You might want to copy and paste all properties (except
title and name) and see if your new composed look shows up in "Change the look". Then link to your own custom spcolor file.
Eric Overfield - PixelMill -
blog.pixelmill.com/ericoverfield -
@EricOverfield

Similar Messages

  • I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ?

    I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting

    I have an iPhone 4 also.  If you are referring to the flyover view, its unavailble for the iPhone4.  If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
    Hope this helps

  • Customer PC3000 does not exist (please change entry in plant 3000)-INT STO

    Hi All,
    Iam getting error message while creating intercompany sto PO in my QA clinet.
    (Customer PC3000 does not exist (please change entry in plant 3000)
    Vendor maintained both the plant(supply and receeving plant)
    Customer maintained both the company code and sales org.(supply and receeving plant) then also Iam getting same error.
    I had checked OMGN t-code setting looks good.
    Same setting I had tested on DEV and SANDBOX its wokring fine.
    Please help me out how to solve this problem
    Thanks
    Raj K

    Hi,
    I am facing similar problem, When trying to create a PO for Intercompany stock transfer, I am getting the error message Customer XXX does not exist (Please change the entry in Plant XXXX).
    This error is appearing only in the Production system, but PO is getting created in Quality system. All the Master data, Configuration in both systems appears same. If you know any solution, kindly post.
    Regards,
    Onkar

  • How to change the look of the ESS Overview page

    Hi,
    We are implementing ESS/MSS and would like to change the look (font size and color, background color, ...) of only the Overview page (Area Group Page). From what I understand when a theme (css) is used it is applied to an entire Portal Desktop, not to a single page. And since the Overview page is a Web Dynpro application (part of the Floor Plan Manager), it doesn't seem possible to change the look besides using themes.
    Of course we would like to keep the possibility to configure this page using IMG so rebuilding it from scratch is not really an option.
    Any idea how this could be done?
    Thanks,
    Martin

    Thanks Srikanth,
    As far as I know it is not possible to change the font size or color of the overview page using IMG.
    But I found a way of applying a theme to a single Web Dynpro application running inside the portal, like the Overview page. You need to specify the theme in the iView property editor using the Application parameter sap-cssurl. The feature is there and more or less documented, the only problem I am still not able to make it work, the portal theme is always used. It is also possible to change the theme of <i>all</i> the Web Dynpro applications running on the server (by changing WD a property in the J2EE Visual Admin, see this <a href="https://forums.sdn.sap.com/thread.jspa?threadID=367022">post</a> for example) but this is not what I want to do.
    Regards,
    Martin

  • Printing issues i'm not able to change the print order it always prints back to front.

    I have an HP Pavilion  model p6112p. Operating System is Vista Home Premium 64-bit, with an HP Deskjet Printer Model 6980.
    The issue is I am unable to change the printing order of multiple page printing, they print from back to front on everything that I print, even my Quicken Checks, print back to front. I am unable to resolve this issue. HELP!!!! 

    I changed the code a bit. I removed the graph and replaced it by a value, the same error occured.
    How to reproduce:
    1) Exit LabVIEW completely (VERY IMPORTANT)
    2) Open and run the attached VI
    3) change the value of the 'value'-control to eg. 2.2 by typing in the value.
    4) press on the print button
    5) try to change the value of the 'value'-control to eg. 5.0 by typing in the value. This is NOT possible.
    Changing the value with the arrows is possible.
    6) stop the VI.
    7) restart and no problem will occure.
    8) Completely exit LV, restart the VI (and LV), the same error appears again after having printing the front panel.
    I notice this only with LV 6.0.2. With LV 6.1 it seems to work fine.
    Attachments:
    PRINTfp.vi ‏28 KB

  • Need all the drivers and cannot change the brightness with keys

    my product name is hp 15-r250tu notebook i brought it a few days back all and the os i am useing is windows 7 ultimate all the drivers need to be installed but are not available on hp.com dont know why ? and i am not able to change the brightness with keys and cannot play games or videos video card off

    Hello,
    please have a look there: Adobe ID, sign in, and account help. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
    Good luck!
    Hans-Günter

  • Custom Masterpage throws error in "Change the Look"

    I created a custom master page based on the "Oslo" look in SP2013.  The master page applies to sites just fine.  However, when I try to use the "Change the Look" dialog in the site settings, the process hangs.  I looked
    at the script error console and found that it was looking for a missing div with the id "ms-designbuilder-cuicontainer." (The actual error
    says "Unable to get property 'appendChild' of undefined or null reference in designgallery.js." I did a stack trace to find out what the null element was).  
    I don't see this div in any of the standard SharePoint master page html files, so I am wondering if there is a SharePoint snippet which generates
    this div.  I get the same error when I use the standard Oslo master page, but not with the Seattle master page.  Any assistance you can provide would be greatly appreciated.

    I decided to just make my custom master page work from the Seattle master page.  The Oslo master page appears to be broken for other users as well.

  • Change the look and custom themes, masterpage problem

    I have created a masterpage and deployed it to the masterpage gallery.
    I have created a spcolor file and a spfont file and deployed them to the theme catalog.
    I have also created a New item in the composed look list like this:
    Masterpage: /_catalogs/masterpage/mycustom.seattle.master
    Theme: /_catalogs/theme/15/mycustom.spcolor 
    Font: /_catalogs/theme/15/mycustom.spfont
    Image: none
    DisplayIndex 3
    The problem is this: The theme is not displayed in the Change the look preview window.
    But if i change the masterpage back to std (/_catalogs/masterpage/seattle.master) in my composed look item. THEN it is displayed ??
    Changing back to my custom masterpage, then it disappears.
    Everything looks right, i can apply the theme through code. Masterpage is also changed in code and works.
    The only place it doesn't work is in change the look.
    The masterpage is deployed like this:
     <Module Name="MasterPages" List="116" Url="_catalogs/masterpage" Path="MasterPages" RootWebOnly="TRUE">
        <File Url="mycustom.seattle.master" Type="GhostableInLibrary">
          <Property Name="UIVersion" Value="15" />
          <Property Name="ContentTypeId" Value="0x010105" />
        </File>
      </Module>
    What am i missing ??

    Hi blarsern,
    Thanks for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
    I will mark your reply as anwser to close this case.
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Composed looks / Change the look themes are missing when creating site from saved template

    Hi,
    I found an issue when save you own site template and then want to create a new site from that template the "Change the Look" themes are missing and if you go to site settings, Comosed looks where the themes are stored is empty! Anyone else has
    the same experience? Any workaround for this?
    regards
    Martin

    I've just seen this exact problem on a SharePoint 2013 farm as well this morning, but have managed to fix the blank "Composed Looks" list issue, although am still working on the "Change the look" wizard pages.
    Edit: found a fix for this too now. See my next post below.
    It appears that the process of saving a site as a template and then creating a new site from that template causes the original XsltListViewWebPart used to display the default view of the "Composed Looks" list, to be replaced with a ListViewWebPart,
    which appears to be broken.
    Edit: have also seen this behaviour on sites created from the built-in templates but haven't determined exactly whether this is a bug. ULS logs never show any errors when this occurs so it appears to be "by-design". Ugh.
    There may be a tidier way to fix this, but for now, I used SharePoint Designer 2013 to copy an XsltListViewWebPart from a working "Composed Looks" list, AllItems.aspx page and replaced the ListViewWebPart in the broken Composed Looks list, AllItems.aspx
    page with it. There is also some additional post copy-paste tidy up to do on the pasted-in XsltListViewWebPart HTML to get it to work within the context of the site it is now in as it will contain GUIDs and URLs that are only relevant within the site
    that you copied it from and these need to be replaced with the GUIDs/URLs from the replaced ListViewWebPart - paste it in a notepad session before deleting/overwriting it so you can grab those bits.
    I'll write a more detailed step-by-step if anyone wants it, but this doesn't seem to fix the broken "Change the Look" wizard still, only the "Composed Looks" list default view. I'll look into that now and post back more complete solution if I can
    find a fix.
    Edit: Found a fix. see my next post below.
    Edit Edit: One more thing - on some Composed Looks lists we are seeing empty lists once the default view webPart is fixed up. To correct this, you can copy selected Composed Looks from a working site with a full set.
    Before you do that, edit the default view in both the source and destination Composed Looks lists and include the Title field as it is a required field.
    Then, you can use Datasheet View (just click the edit list link to put it in Datasheet View mode) to bulk copy/paste Composed Looks between the source and destination lists.
    Do a little post-paste tidy up on the URLs as above to make sure that they are correct for their new location and then click on over to your Change the Look wizard.
    You should see all of your Composed Looks displayed nicely on the page.
    Note that the Current Look might not represent the sites actual appearance as it's settings will reflect the source sites appearance, but you can tweak it with the Wizard now.
    Regards,
    Glenn
    Can you confirm your sharepoint patch level?

  • Change the look after creating own composed look.

    I have recently been introduced to Sharepoint 2013, i have used the sharepoint palette download to change set colours in an .spcolor file. I have uploaded these and all worked fine however I now dont seem to be able to change the look it just hangs and when
    clicking Try this out i get an error message.
    I am using Oslo if that makes difference.
    I even tried just altered the .spcolor file and replaced it in the Themes folder 15. When I go to change the look the current theme shows the updates in the small preview thumbnail however the page does not.
    Does anyone know if this error is becasue ive uploaded my own .spcolor?

    I shouldn' think so.  I've not looked at the Palette creator tool for a few months but I'd assume that all it outputs is a file containing hex references matching your choices.
    Does your deployment do this in site collection that doesn't have your custom palette?
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • Changing the Look (Composed Looks) Hangs

    Everytime I try to change the look to a different Composed Look, the session hangs.  It doesn't appear that the look is ever changed.
    Are there any known issues with this?

    What version of SP are you using specifically?  Also, when you change the look there's some work that happens behind the scenes -- how long are you waiting?
    Also, is the URL for the site set as a trusted site (assuming you are using IE)?
    John Ross
    SharePoint Server MVP | Sr. Consultant Rackspace:
    SharePoint Consulting
    Blog: http://johnrossjr.wordpress.com
    Twitter: @JohnRossJr
    SharePoint 2013 Branding and User Interface Design
    Professional SharePoint 2010 Branding and User Interface Design (Wrox Programmer to Programmer)

  • Can I change the look of Notes?

    Can I make Notes in Mavericks look like it did before the upgrade i.e. like a yellow legal pad?

    Thank you for  you reply, Stephen,
    but I'm afraid I haven't  got my answer yet.
    I've checked the workset you mentioned and I saw the properties of Portal theme page.
    But I can see only change the look of tray. But I want to totally remove Fill Tray, Plain Tray, Transparent Tray and
    Collasped Tray from the Portal Theme menu screen.
    Yours Regards,
    JS Park
    Edited by: Jong-Seok Park on Nov 19, 2009 1:50 AM

  • Change the description of Custom transaction

    Hi All
    Business requirement is to change the description of custom transaction. I have changed in SE93.
    But, now this change should appear in all the roles(single and composite) wherever this transaction used.
    Do I need to update each role or Do we have any option to refresh the description of transaction in roles?
    Thanks in advance.
    Srini

    Hi Srinivas,
    I first recommend to identify the # of roles in which the custom transaction code exists. If you find the tcode in only few of the roles, you can modify them individually from the role menu and transport them back.
    If you have more roles, alternative is to use eCATT scripts. But, make sure that you use the search option in the role menu, rather than selecting the tcode manually.
    The last option is as recommended above. Maintaining the values in the table is not recommended though
    Regards,
    Raghu

  • Custom item does not appear on Hotsync Menu

    I have a Sprint Treo 700p.  My work email was converted to Outlook from GroupWise.  I am able to sync successfully, but received a message about changing profiles and conduits.  I tried to do this by clicking the Hotsync icon in system tray.  The menu that appeared only had three items (Settings, Install, Exit).  The CUSTOM item does not appear.  I am using Hotsync Manager 7.0.2.  How can I get back the CUSTOM menu item?
    Thanks in Advance,
    Corey
    Post relates to: Treo 700p (Sprint)

    Those Hotsync options are what display on Palm Desktop 6.2.2, not prior versions 4.x.
    To get to your Hotsync settings, click the Hotsync icon, and select Settings.  Then click Applications. Select the conduit you wish to change, and click Configure.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • How can I change the look of components?

    hi there,
    I've always had this question in mind...............
    can I change the look of components in flash??

    Yes, you can. It's not particularly complicated, but I'd
    suggest you first look in the help file. Search for the term
    "customizing UI components". If you have trouble after reading
    that, then feel free to ask more specific questions. We'll be happy
    to help.

Maybe you are looking for