Custom Compressor Settings Missing

Under Share>Export Using Compressor Settings none of my custom settings are there. They appear fine in Compressor itself. Any idea how I can fix this? I've tried exporting, then deleting them and reimporting - nothing. Thanks.

I don't know the cause but it ids definitely worth trashing the FCP X preferences with
http://www.digitalrebellion.com/prefman/

Similar Messages

Custom EQ settings missing in 10.1

It seems that my custom eq settings are missing in a project after the upgrade to 10.1. Audio clips that I know I adjusted now just say "Flat(edited)" but I don't see any way to see what the edits actually are. The sliders are all flat.

Hi,
Every release of soa suite may have an updated version of the worklist application. So if you customize the application and upgrade your soa suite installation there may be ar risk you get into problems. However, most of the time the updated version solves existing bug and no more than that. An other issue is that if you are using the bpel libraries to connect to a bpel server the client always needs to be of the same version as the server. What you should do is:
- get the new 10.1.3.3 version of the libraries or install JDeveloper 10.1.3.3
- update your orabpel.properties file and make sure the bpel home is pointing to the new version
- update/verify the build.xml that it is pointing to the new libraries
- rebuild/compile your customized worklist app against the new libraries
- redeploy the new worklist application to the 10.1.3.3 server
Kind Regards,
Andre

Custom Compressor settings not showing in Final Cut Pro X?

I have FInal Cut Pro X and Compressor 4.1. I've made a few custom settings in Compressor and can even see them in Library/Application Support/Compressor/Settings but they don't show up when I click on 'Export using Compressor Settings' in Final Cut Pro X.

Do you see them in the Custom follder in the Compressor Settings pane?
How about here in the FCPX Destination Preferences?
Russ

Compressor settings missing!

Hi,
I have some compressor pre-sets missing including 'instrument compressors'. Has anybody else found this or found a solution?
Thanks

I don't know the cause but it ids definitely worth trashing the FCP X preferences with
http://www.digitalrebellion.com/prefman/

Where does iTunes store the custom EQ settings on my hard drive? (OSX 10.6)

Bought a new Mac. I moved over my iTunes library via export and then import. The songs are on an external drive. Everything went perfectly... except for my custom EQ settings.
The songs still have the custom EQs, but the equalizer itself doesn't have those settings anymore.
For example: for quiet songs, I have a custom EQ called "+6" that boosts the overall volume by 6db (far left EQ slider). If I click Get Info on a song with that custom EQ, I can see that it's still there (in the song's info, I mean), but the EQ itself is missing all of my custom EQs.
I have a full backup of my previous hard drive (not to mention that I still have the old Mac). Where can I find those EQ settings? Surely they're in a file somewhere, right?

The last time I did a clean install of Windows on my PC, I backed up the entire iTunes folder on a separate HD partition. After reinstalling iTunes, I copied the iTunes folder back to the C drive and all of the many EQ presets I had created were restored, along with the music. That was in late 2011. I came to the conclusion that this was how you back up the custom EQ settings.
I guess I made a mistake by assuming it would work again this time. Did I? I repeated the process today when I reinstalled Windows, and all the presets I had created did not get restored and now seem to be gone... Is there any way to recover them?
I spent a lot of time tweaking the different frequencies to get them just right and hope to not have to repeat that process.
All of the settings were created using the custom presets, and not on individual MP3 tracks themselves.
(iTunes version just installed: 11.0.2.26)

Different Compressor settings for export in FCPX = same result

HI
For test purposes for a movie screener to upload, I've been changing the settings of a custom Compressor setting I imported into FCPX but seem to get the same result size-wise whether its 1- or 2-pass.
Do I need to delete the icon in FCPX and then re-choose it?
best
elmer

The Compressor quality slider (Least>>>>Best) in the dialog is activated when the Bit Rate is set to Automatic. If a bit rate is entered in the Restrict to field, the slider is inactive. Also, the slider is not available at all for some codecs.
One way or the other, one chooses a bit rate and that times the duration is the total bit budget that compressor figures out how to allocate on the first pass. Complex scenes get higher rates and less complex get lower rates.
Russ

What Compressor Settings for the web?

I have a 1min40 sequence with the Settings: PAL, Frame Size: 1280x720, 25fps, Compressor HDV720p25. What Compressor Settings would you recommend please:
1) to put it in a website
2) for Broadcast: would Apple ProRes HQ be a good choice?
Thanks in advance.

You can review the information first hand at youtube.com
Or create a custom preset in Compressor:
Name: YouTube sharing
Description: H.264 video at 8 Mbps with AAC 44.1kHz audio
File Extension: mov
Estimated size: 3.6 GB/hour of source
Audio Encoder
AAC, Stereo (L R), 44.100 kHz
Video Encoder
Format: QT
Width and Height: Up to 1280 x 720
Pixel aspect ratio: Default
Crop: None
Padding: Preserve source aspect ratio
(L: 0, T: 0, R: 0, B: 0)
Frame rate: (100% of source)
Frame Controls: Automatically selected: Off
Codec Type: H.264
Multi-pass: On, frame reorder: On
Pixel depth: 24
Spatial quality: 50
Min. Spatial quality: 50
Temporal quality: 50
Min. temporal quality: 50
Average data rate: 8 (Mbps)

Where are compressor settings kept?

I have Compressor and some settings I would like to share with some fellow educators who do not have it, but do have FCP X. I was hoping to find the location where the Compressor settings are stored and add extras. And would they need to be in a folder labelled Custom, or just thrown in? Or is the whole idea not going to work? Thanks for any insight.

I should have mentioned earlier - that is the location of custom settings that you have created. The default settings that it ships with are stored inside the application bundle.
So if you don't have Compressor, you can't create custom settings and so you won't have that directory.
If you have an earlier version of Compressor the settings are stored at ~/Library/Application Support/Compressor.

Downgrade Compressor Settings for longer DVD

I work with very simple standard definition 4 x 3 aspect video and sometimes make DVD's Compressing with the various Stock DVD Compressor settings. I have never made a custom setting with Compressor. Now I would like to put a 200 minute video on a standard DVD (not dual density).
Can I modify a default setting like the 150 minute, and downgrade the quality enough so that the 200 min results would fit on a 4.6 gig DVD? (maybe room for a very simple menu.) Do I have to make a new setting from scratch, or could I modify and save, working from a default? Like I say, I have never made a compressor setting, so I could appreciate a sort of step-by-step.
Thank You
Richard Miller

Duplicate the DVD preset you want to use; it will show up in the custom presets in Compressor. Clcik on the new custom preset so it will show in the Inspector window and make any needed adjustments. Give it a name you'll remember then save it and apply it to the file you want to encode.
You can use one of the available online bit rate calculators to determine the best bit rate based on your program's duration: http://www.google.com/search?client=opera&rls=en&q=dvd+bit+rate+calculator&sourc eid=opera&ie=utf-8&oe=utf-8
-DH

.mts files and compressor settings

Hello,
I need some help using final cut pro!
I recorded some footage on a Canon HG20 camera onto an SD card.
I then transferred the footage with showed up as .mts files from the SD card onto my macbook.
My first question is why can't I open .mts files with imovie or final cut pro?
I used an app called Video Converter to convert my footage into .mp4 files. But I realise that these are compressed files and may not be ideal for editing.
My second question is what is the best file type to edit in final cut pro?
So I imported these .mp4 files into Final Cut Pro 7. The compressor for these media files in the browser is H.264 and I realise that my sequence settings have to match these compressor settings. But I have two problems with this -
1. I want to eventually export the video to YouTube, and editing .mp4 files with a compressor H.264 is going to eventually be poor quality. Right? Can I change my media compressor settings?
2. The most important and puzzling problem is that even though my compressor settings match, everytime I drop something on the timeline or edit anything on the timeline it shows that I have to render it - so basically I'm rendering my footage continuously to see the playback. What am I missing - what am I doing wrong!?
Do I have to do something first in Easy Setup or changel my sequence compressor to Apple Pro Res?
All I want to do is edit something in final cut pro and upload it on to youtube with reasonably good quality - any help with this would be very much appreciated as I've been scowering the internet for answers and nothing seems to solve my problem!
Thank you in advance,
julia19

Hi Russ,
thank you so much I'm doing a log and transfer now and it seems to be working! I think my initial problem was that I was trying to transfer only the .mts files when I should have been transferring everything from the SD card.
I can't believe it was that simple!
Are there any specific settings I have to do in Easy Setup in order to later export to YouTube?
Thank you again!
julia19

FCPX Export Compressor Settings QT Error -2045 and more...

I have a 56 minute FCPX project that won't export. I've tried standard h264 and using Compressor settings for HD 720 for YouTube / Video.
Most recent error is QuickTime Error -2045 - can't find this error documented anywhere.
My console log last recorded for FCP this error:
12/8/11 11:39:26.447 AM [0x0-0x1ff1ff].com.apple.FinalCut: Exception raised cleaning up media server process System Error = 3 {No such process}IPC Server did not respond to message, Server process is gone
Other notable log entries include:
12/8/11 10:05:05.614 AM [0x0-0x268268].com.apple.FinalCut: objc[18251]: Class CMIOGraphService is implemented in both /System/Library/Frameworks/CoreMediaIO.framework/Versions/A/CoreMediaIO and /Applications/Final Cut Pro.app/Contents/Frameworks/CoreMediaLion/CoreMediaIO.framework/Versions/Curren t/CoreMediaIO. One of the two will be used. Which one is undefined.
12/8/11 10:06:05.139 AM [0x0-0x268268].com.apple.FinalCut: Parse error (15) No data found at file://localhost/Users/allan/Movies/Motion%20Templates.localized/Transitions.lo calized/MotionVFX/Project_543_Transition_mFlare.motr on line 1, character 1
(note that there are files in this directory and the transition works in preview in FCPX)
12/8/11 10:06:05.139 AM [0x0-0x268268].com.apple.FinalCut: <CFURL 0x142893fd0 [0x7fff7b0d9f40]>{type = 15, string = file://localhost/Users/allan/Movies/Motion%20Templates.localiz
12/8/11 10:06:05.140 AM [0x0-0x268268].com.apple.FinalCut: ed/Transitions.localized/MotionVFX/Project_543_Transition_mFlare.motr, encoding = 134217984, base = (null)}
12/8/11 11:39:23.402 AM com.apple.launchd.peruser.501: ([0x0-0x268268].com.apple.FinalCut[18251]) Job appears to have crashed: Segmentation fault: 11
This is interesting:
12/8/11 1:59:24.133 AM [0x0-0x1d41d4].com.apple.FinalCut: fgetln, Codec32BitTool errno 22
Now prior to this last (4th attempt) at exporting I was getting this error:
12/8/11 1:21:39.618 AM Final Cut Pro: [01:21:39.618] <<<< VTVideoDecoderSelection >>>> VTSelectAndCreateVideoDecoderInstanceInternal: no video decoder found for 'XVID'
I found a decoder online but perhaps it's 32bit... however, this is just the last time; prior I was getting the no decoder error
1) What is -2045 error
2) What is the proper decoder to use for XVID
3) I do get a warning that there is missing media, effects, titles or generators - and I can see the inspector tell me that these are related to motionVFX Project 543 (see error above) but I can't find any instance of these effects not implemented. So, how can you quickly find any missing media (redzone) or other in a FCPX project without scrolling or playing through it. If something is missing I would expect that I should be able to quickly have my playhead jump to the missing media segment within my project. But I can't figure out how.
4) I need to deliver this project and can't get a suitable export and I'm on deadline, so any thoughts are appreciated. My ideal output is a file to load to Vimeo; secondly a good quality Quicktime movie would be nice. The file is about 50GB (my guess) I need less than 5GB and 720p HD
Thanks

From Crash Analyzer:
-2045 (QuickTime)
This error occurs when a file fails to write properly.
Suggested Actions
* If you were saving to a network drive, try saving to a local drive instead.
* If this occurs when exporting from Final Cut Pro, it can sometimes be caused by rogue plugins. Use Plugin Manager to disable third-party codecs for Final Cut Pro.
More Information
System description for error -2045: Data already closed
Report generated by Crash Analyzer in Pro Maintenance Tools
I would also recommend converting your Xvid files to ProRes before bringing them into FCPX.

Firefox 4 Deployment with customized user settings?

Hi folks,
I want to deploy FF 4.0 with customized user settings, but where is the "localized" folder for my prefs.js file? In FF 3.6.x we've extracted the setup.exe file and with sources we deployed our customized firefox. Now in FF 4.0 there are some folder missing in the new sources. Are there any documents which explain the deployment of FF 4.0? thanks a lot

Here are some instructions for creating a customised deployment of Firefox 4 (including setting the homepage for all new and existing users)
http://mockbox.net/configmgr-sccm/174-install-and-configure-firefox-silently.html
http://mockbox.net/configmgr-sccm/300-firefox-4-set-default-home-page-for-all-users.html

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?
Thanks!
-Adrian

the old apps are on my computer but they have had upgrades since they were put on the ipod originally. you think you would get a warning about this when you restored. I was not worried about losing the progress of the apps but i would have been worried about the app it self!!!!!

Customs product master missing error

Hi,
while creating sales order and saving it, iam getting the error, "subsequent processing not allowed(Customs product master missing 12123). contact customes excise tax dept""........and i cannot save the sales order.
12123 in the error message above is material number.which i give in sales order.......................the message no is FTPI901
what is the issue. ??? at first i thought some coding is done in user exit for sales order.. but i cannot find any such code in exit.
regards
sachin

Hi,
for transfering material master data from feeder system (R/3 / ERP) to GTS follow these instructions:
- go to SAP GTS PlugIn Menue in ERP
Transaction Code: /SAPSLL/SAPLMENUE_LEGAL_R3
- go to Tab "Initial Transfer of Mast. Data"
click on "Transfer Material Masters"
- choose your particular material and execute (F8)
hope that helps!
regards,
Ralf

Can no longer change bit rate in AAC custom import settings

I've been re-ripping all my CDs at the new higher bit rate. My import settings were AAC Encoder -- custom, originally set to 256 kbps, VBR, and auto for the other two settings. However, some CDs I wanted at a lower setting, so I would go change the bit rate to either 192 or 224 (just so I'd have more room on my ipod) and there wouldn't be a problem. But now it's stuck -- the pop-up box no longer opens when I choose import settings, AAC Encoder, Custom, so I can't change the bit rate or anything else, and it's stuck on 224 kbps. I can still change bit rate and other settings in the custom menus for MP3, WAV, etc., just not AAC. A repair install of iTunes did not fix the problem.

Hi, Ed. I am running iTunes 9.0.3.15. When I click custom, the settings description in the details box display what they were before this thing happened = 112 kbps (mono)/224 kbps (stereo), VBR, optimized for MMX/SSE2. The pop-up dialogue box that used to appear (where you could choose the specific bit rate from the drop down menu) does not appear at all.
However, when I choose anything other than AAC Encoder, and then pick custom, the pop-up box appears and I can choose the bit rate and adjust the other settings as usual. It's just not happening for AAC Encoder anymore. Since the total un-install (following Apple's specified order) and reinstall didn't work, I'm baffled how to fix this .... (If it makes a difference, I changed the bit rate in the custom box while a CD was being burned...Apparently that was stupid, but I had done it previously without incident.) Thanks.

Custom Compressor Settings Missing

Similar Messages

Maybe you are looking for