Custom Condition in Header of central contract

Dear All,
SAP SRM 7.02. Service Contract.
I have created the custom condition type and added those in the group 0100 & 01HD for contract in SRM with reference to ECC.
The custom condition is displayed at header level in the dropdown list. But when i choose the custom conditions, it is not selecting. Where as the standard condition type is selected and able to enter discount.
Kindly guide me .Is there any other setting need to be maintained...??
thank you...

HI,
Now it is displayed in central contract in SRM and i have created contract in SRM and Send to ECC with header custom condition to ECC system.
In the ECC the contract is created, but the central contract that is created in ECC, where i can see the Header condition. I can able to see the Item conditions.
Since the central contract screen in ECC is different than normal contract screen in ECC system.
Thank you...

Similar Messages

  • Condition types from Central Contract not copied into Purchase Order

    Hi,
    When creating a central contract from SRM to ECC, all the condition types are copied well.
    But when creating a shopping cart from SRM or a PO in ECC referencing the created central contract, the condtion types are not displayed in the conditions tab. (Only Condtion type PB00 is displayed.).
    What can I do to assure, that all the condition types from the contract are displayed in the PO.
    Do I have to do some customizing, or is there a SAP Notes to resolve this.
    Regards,
    Alexander

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • ECC - Central contract via SRM - condition Item button does not work

    Hi,
    After the creation of a central contract via SRM, I checked if all the condition types are taken over to contract in ECC.
    When selecting the item line and clicking on the condition button, it works correctly. After going back, to the main screen where the items are displayed I click once again on the condition button. Now it does not show anything, nothing happens.
    I have been looking for an OSS Note but couldn't find any. May you an OSS Note that I can use to solve this issue.
    Regards,
    Alexander

    hi Alexander,
    Do you get any error message.Can you check the konp and konh tables if entries exist
    regards,
    Lalita

  • Central Contract SRM

    I have an issue, when I create central contract in SRM. The Select System is empty. No values is there on the screen.
    Even though I try to create contract I have the error message "No customizing entry for SRDCLNT600 in table BBP_BACKEND_DEST"
    We have SRM 7.0 , ECC 6.0 EHP4.
    Regards,
    Lya

    Hi,
    Are you just setting up the system or has it been working already ?
    Pl check your "Define Backend Systems" set-up in IMG. There might be some problem here.
    Best regards,
    Ramki

  • Unable to create service central contract items

    Hi Experts
    We are in SRM 7 EHP 2 ECC 6 EHP 6
    We are unable to create Central Contract with Service.
    There is no "Outline" or "Service" on drop down from ADD LINE in Central Contract.
    Please help urgently.
    Thanks
    Ajit

    Hi Ajit,
    Please check if hierarchy template HIER_SE is assigned to this contract transaction type in the following customizing.
    spro -> SRM Server -> Cross-Application Basic Settings -> Service Procurement Activate Service Procurement
    Also SM34: /SAPPSSRM/VC_HT -> Assign to Transaction Type
    Best regards,
    Wendy

  • SRM 7.0 Central Contracts Excel upload

    Hello All,
    We are implementing SRM7.0 implementing Central Contracts ,want to use the Contract upload function using the excel file , not able to see the button or link to do the same .
    Am i missing something.
    Pl. help.
    Cheers,
    Sid

    Hello Jay,
    I would like to import central contract to SRM 7.0 via excel file. When I click the import button after edit functionality and choose the file path from the computer and push the upload,  button, I got an error message saying File type of specified file C:\Users\Administrator\Desktop\Contract.xls not supported . Therefore, the excel file cannot be imported to the SRM system. When I also try to import tablimited format of .txt files, I got same error message and unfortunately I cannot achieve central contracts to be imported.  How can I solve this issue? Should I check some customizing settings or something?
    Many thanks for your guidence,
    Mehmet Gullu

  • Distributing Central Contract from SRM to ECC

    Hi,
    We are using SRM 7.0 with ECC 6.0 in backend (no EHP). We're setting up a central contract with IDOCs. From what I read we have made the configuration:
    in SRM:
    - Assign attribute CT_PROC_TY = CCTR
    - Connfigure new condition type PB00 which is the same with ECC price for contract
    - activate the BADI BBP_DETERMINE_LOGSYS and coding it so for contract it will always go to backend (in method CONTRACT_LOGSYS_DETERMINE)
    - I have activated BADI BBP_CTR_BE_CREATE but writing no code, as there no need for me to do mapping
    in ECC:
    - Activate inbound IDOC type BLAORD and COND_A and assign it to the logical system of SRM
    Then I create the contract in SRM. but:
    1. When creating contract, in item overview, i cannot tick 'distribution' indicator. Not sure what is the function
    2. In item detail, tab distribution, I cannot put create release-purchasing org. Even when using search help it is not giving any value
    Actually dont really understand the usefull of the indicator above, so I let it be empty, then I release the contract
    The contract then not appear in ECC. I have checked SMQ1/SMQ2 nothing. Even in WE05 in ECC nothing. The only thing I see is in SLG1 where I see error triggered by user WF-BATCH with message "No recipient found"
    Do i miss something in here? Any help will be very appreciated.
    Josh

    Hi Josh,
    Central contract is only possible in SRM 7.0 with ECC 6.0 EHP 4. You can use local contracts or GOA.
    Regards.

  • Problem for Header text of Contracts

    Hi guys,
    a suggest:I have created in customizing a new header text and I want display and manage it on header of contract but when I create the contract see always the standard header texts 'release order text', 'header text','header note' 'pricing type' 'deadlines' but my own header text number 17 there is not.
    i have simply entered in customizing Contract>Texts for Contracts>Define Text Types for Header Texts and I have created the text with sequence numeber 17...how can I display it in header of contract?
    I have seeked for in this forum but in all messages on text I don't find this problem
    Thanks in advance
    Bye

    Hi,
    am adding up...........
    Please refer the below link......
    http://www.sap-advisor.com/abap-coding/sap-text-administration-and-info-records-for-purchase-orders/
    Hope it may help you...
    Venkat.

  • SRM 7.0 Central Contracts Migration from ECC existing contracts

    Hi colleagues
    We are facing the implementation of SRM 7.0 in a client who has ECC installed and we have a doubt with contract migration
    We are considering using SRM Central Contracts in order to get them replicated on ECC
    All the contracts "alive" that exist in ECC should be created on SRM as central Contracts. The problem is that when you create a SRM central contract the system will replicate it to ECC ... in that case we will have the same contract twice on ECC
    Does anybody face this situation?
    I figure out that if at the moment we are creating SRM central contracts we turn off XI/PI the system would not replicate the contract to ECC but I think it would return an error without creating the contract on SRM... and even if we managed to create the central contracts in SRM without replicating them to ECC we would have the problem that both contracts wouldn´t be linked
    We can´t consider the solution to be creating those contracts on SRM as SRM local contracts because we need to follow contract cicle in SRM after migration
    Could anybody help me out with these?
    Thanks
    Regards

    Hello,
    You can upload contracts from ECC to SRM using report BBP_CONTRACT_INITIAL_UPLOAD in SRM.
    If you want take care of document type mappings/ Condition type mappings, use badi BBP_CTR_INIT_UP in SRM.
    Thanks,
    Sushil.

  • Purchase Order - Retrieve net price from Central contract (SRM or ECC)

    Hi,
    I'm doing a test by creating a PO referencing a Central Contract, which is made in SRM. When creating the PO, at this moment the net prices is retrieved from SRM.
    Question: Is it possible to retrieve the net price from the copied contract which is in the Local ECC system?
    (Customizing in ECC) SPRO -->Integration with Other mySAP.com Components >Supplier Relationship Management>Central Contract-->Price Calculation
    The value what is at this moment:   SRM Pricing Immediate
    Should the value be: 1 SRM Pricing Immediately Only for Hierarchy Contract Item
    Regards,
    Alexander

    Check for existing screen layout name from below settings -
    Goto SPRO -> IMG Settings -> Materials Management -> Purchasing -> Purchase Order -> Define Document Types
    Check for Field selection key against the PO Type.
    Then goto below setting -
    SPRO -> IMG Settings -> Materials Management -> Purchasing -> Purchase Order -> Define screen layout at document level
    Select the screen layout / Field selection key in this setting and modify the field selection group Quantity and price. Make Price and price unit as display only as per your requirement.

  • Central Contract -- Sch Agreements error in SRM7 -- ECC6 Eph4

    Hello,
    While creating a central contract in SRM7 and distribution to BE ECC6 Eph4. I am getting a condition mapping error in the IDOC.
    Central contracts to contract in BE uses PI
    Central Contracts to Sch Agreement in BE is IDOC.
    I see an erro " Errors occured in Mapping operation for conditions data" When i check the FM META_CTR_CHECK .
    Mapping conditions are maintained in the ECC
    SPRO--> Integration with Other SAP components > Central Contracts> Maintain Conditions.
    The same settings work in the development system. I see an entry with 003 Message number in table BBPD_CTR_IDOCREF.
    Any help is appreciated. Thanks

    Hi Netaji,
    I know this has been closed for sometime now, I thought I should tell you that you can send central contract from SRM 7.01 to ECC 6.0 Ehp4 and above using non PI webservices.
    Please find the link below just for your information
    http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/06/13/transfer-of-central-contract-from-srm-to-ecc-using-web-services-without-pi
    Regards,
    Naveen

  • Central contract Workflow attributes

    Hello,
    As per my understanding we can activate the workflow on any contract attributes/ fields(for central contract) like prices, product category etc.
    We can activate u201C1-stepu2019 standard bc set u201C/SAPSRM/C_CT_600_001_SP04u201D and can determined workflow agent based on any attributes like u201CProduct categoriesu201D ,price etc
    Or we can use BADI Implementation u201CBADI /SAPSRM/BD_WF_RESP_RESOLVERu201D for Agent determined based on attribute store in customized table
    Please correct me if my understanding is wrong
    However we need your valuable inputs on below
    1)     List of central contract ( CCTR ) attributes/fields on which we can activate the workflow.
    2)     List of central contract ( CCTR ) attributes/fields on which we can activate the workflow without any badi implementation ( without any coding ). As a part of standard configuration.
    Best Regards
    EPR_SRM_MDM

    HI,
    I suppose you plan to use process controlled workflow.
    If yes then you can check the tcode BRF and try to create a expression of type formula interpreter.
    In the this expression navigate to formula editor and here you can find all the attritutes you can trigger for any business object.
    For agent dertermination SAP has already delivered many agent determination method.. If a process level and click on the F4 feature available for field Resolver Name to find all the predelivered methods.
    You can check the service market place http://service.sap.com for Workflow Guide SAP SRM 7.0
    Path:
    service markerplace -> Release & Upgrade info -> Installation & Upgrade Guides-> select SRM 7.0
    Regards
    Sam

  • Facing problem in creation Central contract in SRM 7.0 System

    HI Experts,
    We have implemented Classic scenario in P2P business application.
    We are facing problem in creation Central contract in SRM system as we using SRM 7.0 .
    Error show  Application error in back-end system  (SAP SRM outline agreement* & Differing time interval
    Status show Document complited ->Distribution Incorrect >Created>Complate > Released.
    Please Reply
    Sharad

    Hi Sharad
    some mapping error with ECC and SRM
    expand the COND /BLOARD . you must get some clue - in bd87 51 error code
    did you map pricing condition type with ECC and SRM?
    kindly check BADI mapping in SRM
    Muthu

  • PO new pricing for selected custom condition types

    Hi Experts
    We have certain custom pricing conditions determined through condition records.
    Periodically these conditon records undergo changes (new rates maintained).
    We would like to have redetermination of new prices for the custom conditions for all the open POs.
    Is it possible to have this function for the conditons types which undergo changes.
    Thanks
    ramSiva

    Hi ;
    You can filter open PO's with a selection parameter WE01 in ME2N.
    After that , go to MEMASSPO tcode , copy open PO's. And, update conditions with header or item EKPO-EBELP or EKKO-KNUMV.
    Transformation :
    KONV-KNUMV = EKKO-KNUMV.
    KONV-KPOSN = EKPO-EBELP.
    Regards.
    M.Ozgur Unal

  • Central Contract for various company code

    Is it possible to create a central contract for several company code & to Generate Contract release order to a particular company code.

    Hi Chandra
    U can Go for centrally agreed contract
    Contract items can relate to a single plant or to all plants covered by a purchasing organization (centrally agreed contract).   
    All the plants of a purchasing organization can order against a centrally agreed contract.   
    An enterprise working with a central purchasing organization covering several plants can negotiate better conditions at a high level.  
    Centrally agreed contracts can be entered into with a vendor’s entire corporate group. The individual contract release orders can be issued to different individual companies belonging to the vendor corporate group. This is made possible by the partner functionality.  
    You can stipulate that certain plants are to be supplied by certain companies belonging to the vendor corporate group.
    Vishal...

Maybe you are looking for