Custom Controls and ALV

Hi,
I have created on one Dynpro 3 Custom Controls, which are
responsible for Three ALV Grid Reports.
I have named CC1 for ALV1 CC2 for ALV2 and CC3 for ALV3.
I can put the Data for each ALVs.
So far so good, but if I save the Layout global for one ALV and start the Program again, disappears me some Elements on other ALVs like Columns , Buttons etc...
I have used Method set_for_first_display.
Thanks for your Replies.
Best Regards
Beserithan Malabakan

Wha tis happening is the VARIANT parameter values that you are passing are the same for all the three grids. So, once you alter the layout of one its changing all the grids. What you need to do is to specify a unique name in the field HANDLE of the parameter VARIANT for each grid, say the grid name.
Then this problem will not occur and you will have variants specific to the grid.
It has nothing to do with the global / user defined layouts.
Regards,
Ravi
Note: Please mark the helpful answers

Similar Messages

  • Problem with custom control and focus

    I've a problem with the focus in a custom control that contains a TextField and some custom nodes.
    If i create a form with some of these custom controls i'm not able to navigate through these fields by using the TAB key.
    I've implemented a KeyEvent listener on the custom control and was able to grab the focus and forward it to the embedded TextField by calling requestFocus() on the TextField but the problem is that the TextField won't get rid of the focus anymore. Means if i press TAB the first embedded TextField will get the focus, after pressing TAB again the embedded TextField in the next custom control will get the focus AND the former focused TextField still got the focus!?
    So i'm not able to remove the focus from an embeded TextField.
    Any idea how to do this ?

    Here you go, it contains the control, skin and behavior of the custom control, the css file and a test file that shows the problem...
    control:
    import javafx.scene.control.Control;
    import javafx.scene.control.TextField;
    public class TestInput extends Control {
        private static final String DEFAULT_STYLE_CLASS = "test-input";
        private TextField           textField;
        private int                 id;
        public TestInput(final int ID) {
            super();
            id = ID;
            textField = new TextField();
            init();
        private void init() {
            getStyleClass().add(DEFAULT_STYLE_CLASS);
        public TextField getTextField() {
            return textField;
        @Override protected String getUserAgentStylesheet() {
                return getClass().getResource("testinput.css").toExternalForm();
        @Override public String toString() {
            return "TestInput" + id + ": " + super.toString();
    }skin:
    import com.sun.javafx.scene.control.skin.SkinBase;
    import javafx.beans.value.ChangeListener;
    import javafx.beans.value.ObservableValue;
    import javafx.event.EventHandler;
    import javafx.scene.control.TextField;
    import javafx.scene.input.KeyCode;
    import javafx.scene.input.KeyEvent;
    public class TestInputSkin extends SkinBase<TestInput, TestInputBehavior> {
        private TestInput control;
        private TextField textField;
        private boolean   initialized;
        public TestInputSkin(final TestInput CONTROL) {
            super(CONTROL, new TestInputBehavior(CONTROL));
            control     = CONTROL;
            textField   = control.getTextField();
            initialized = false;
            init();
        private void init() {
            initialized = true;
            paint();
        public final void paint() {
            if (!initialized) {
                init();
            getChildren().clear();
            getChildren().addAll(textField);
        @Override public final TestInput getSkinnable() {
            return control;
        @Override public final void dispose() {
            control = null;
    }behavior:
    import com.sun.javafx.scene.control.behavior.BehaviorBase;
    import javafx.beans.value.ChangeListener;
    import javafx.beans.value.ObservableValue;
    import javafx.event.EventHandler;
    import javafx.scene.input.KeyCode;
    import javafx.scene.input.KeyEvent;
    public class TestInputBehavior extends BehaviorBase<TestInput> {
        private TestInput control;
        public TestInputBehavior(final TestInput CONTROL) {
            super(CONTROL);
            control = CONTROL;
            control.getTextField().addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
                @Override public void handle(final KeyEvent EVENT) {
                    if (KeyEvent.KEY_PRESSED.equals(EVENT.getEventType())) {
                        keyPressed(EVENT);
            control.focusedProperty().addListener(new ChangeListener<Boolean>() {
                @Override public void changed(ObservableValue<? extends Boolean> ov, Boolean wasFocused, Boolean isFocused) {
                    if (isFocused) { isFocused(); } else { lostFocus(); }
        public void isFocused() {
            System.out.println(control.toString() + " got focus");
            control.getTextField().requestFocus();
        public void lostFocus() {
            System.out.println(control.toString() + " lost focus");
        public void keyPressed(KeyEvent EVENT) {
            if (KeyCode.TAB.equals(EVENT.getCode())) {
                control.getScene().getFocusOwner().requestFocus();
    }the css file:
    .test-input {
        -fx-skin: "TestInputSkin";
    }and finally the test app:
    import javafx.application.Application;
    import javafx.scene.Scene;
    import javafx.scene.control.TextField;
    import javafx.scene.layout.GridPane;
    import javafx.stage.Stage;
    public class Test extends Application {
        TestInput input1;
        TestInput input2;
        TestInput input3;
        TextField input4;
        TextField input5;
        TextField input6;
        Scene     scene;
        @Override public void start(final Stage STAGE) {
            setupStage(STAGE, setupScene());
        private Scene setupScene() {
            input1 = new TestInput(1);
            input2 = new TestInput(2);
            input3 = new TestInput(3);
            input4 = new TextField();
            input5 = new TextField();
            input6 = new TextField();
            GridPane pane = new GridPane();
            pane.add(input1, 1, 1);
            pane.add(input2, 1, 2);
            pane.add(input3, 1, 3);
            pane.add(input4, 2, 1);
            pane.add(input5, 2, 2);
            pane.add(input6, 2, 3);
            scene = new Scene(pane);
            return scene;
        private void setupStage(final Stage STAGE, final Scene SCENE) {
            STAGE.setTitle("Test");
            STAGE.setScene(SCENE);
            STAGE.show();
        public static void main(String[] args) {
            launch(args);
    The test app shows three custom controls on the left column and three standard textfields on the right column. If you press TAB you will see what i mean...

  • Oracle WebLogic Integration's Custom Control and SOA Suite Spring Component

    I crated this thread to inform users about some issues with the
    Oracle WebLogic Integration's Custom Control and SOA Suite Spring Component
    tutorial from
    http://www.oracle.com/technology/architect/soa-suite-series/wli_custom_control_spring_component.html
    - Fig. 6 doesn't agree with what's just above. This step isn't necessary because it can be create automatically when you make a class.
    - Fig. 11 shows the package
    sample.oracle.otn.soaessentials.javainteg
    and the class should be placed in
    sample.oracle.otn.soaessentials.javainteg.impl
    - The Business Tier -> Spring 2.5 might not be available. Extensions steps steps should be given.
    - Fig. 15 When lgger-context is created in Jdev 11.1.1.3.0 the Spring context is created in
    /mywork/SOASuiteWLIEssentials/JavaIntegration/src/META-INF
    while in the sample project it is in
    /mywork/SOASuiteWLIEssentials/JavaIntegration
    - Fig 18 has incorrect class name.
    - Fig 19 is incorrect: there is no Spring 2.5 SCA in Jdev 11.1.1.3.0; there is only WebLogic SCA. Where is the canvas mentioned above?
    - Fig 28 logger-context.xml is not where it is displayed in the fig. It is /src/Meta-Inf/.
    - Most of the fig from the deployment are not up to date.
    - I don't understand the need for the portion:
    "Implementing the use case in WLI" up to
    "Implementing the use case in SOA Suite"
    It confused me when I tried to follow the tutorial.

    I am also looking for the same .... Please share the CLoning script for SOA Suite from Prod to staging Env...
    Thanks.

  • Calling dialog program screen in custom control and using drag n drop

    Hi Experts,
    SCENARIO:
    I have a custom container control. I want to insert a dialog program screen in custom container control in one half and tree nodes in the other half.
    Now my dialog screen has a table control. I want that the user can drag n drop the nodes in the cells of my table control.
    Please help.

    I don't think drag n drop works in table control. You may need to change table control to ALV grid control.
    a®

  • Property binding between custom control and its aggregations

    Hi,
    I have a custom control with some properties, e.g., visible, and I would like to bind these properties to its aggregated controls without losing the two-way binding functionality. For example, imagine the following control:
    sap.ui.core.Control.extend('dev.view.control.MyControl', {
      metadata: {
        properties: {
          'visible': {type: 'boolean', defaultValue: false},
        aggregations : {
          _innerTable : {type : 'sap.m.Table', multiple : false, visibility: 'hidden'}
    So in this example, I would like to bind the "visible" property of the _innerTable to the "visible" property of MyControl without losing two-way binding. That means that I do not want to read the "visible" property once in a constructor or so and set it on the inner table. Instead I want _innerTable to react on changes of the "visible" property of MyControl so that I can bind it, for example, with "visible={/model/visible}" on an instance of MyControl and _innerTable changes when the model changes.
    Does anyone know if such a "piping" or "chaining" of properties is possible and how it would be done?

    It's close to my case, but you pass the label to your custom control from outside, where you also perform the data binding. In this case, you know which path should be bound to the label property.
    In my case, the control is hidden inside my control, so I do not know which path from the model should be bound to the inner control. I want to somehow connect the property of my control with the property of the inner control.
    So taking part of your example, the control would look like:
    sap.ui.core.Control.extend('xcontrol', {
      metadata: { 
        properties: {
          'visible': {type: 'boolean', defaultValue: true}
        aggregations : { 
          _header : {type : 'sap.m.Label', multiple : false, visibility: 'hidden'}
      init: function() {
        this.setAggregation('_header', new sap.m.Label({
          visible: <????>
      renderer: function(oRm, oControl) {
        oRm.write("<div");
        oRm.writeControlData(oControl);
        var header = oControl.getAggregation('_header');
        if (header) {
          oRm.renderControl(header);
        oRm.write('</div>');
    At point <????> I want to somehow bind the visible attribute of the label to the visible property of xcontrol without losing the two-way binding, i.e., the label should react on changes of the visible property just like xcontrol would.

  • Printing a Table Control AND ALV grid from same report

    Hello,
    I am trying to figure out how to print the output of my report, which consist of a table control and a OO-driven ALV grid under it. i tried several possibilities but I only get the ALV in my spool....?
    Answers will be rewarded !

    Keep a break point in that method. Press print in the ALV, check it stops in the break point. If yes then you can use write statement, the values what ever u r writing it come in the print-out. If the control doesn't stop in the break point then there is some problem in the method declartion.
    Check my code - I written every thing in the global declaration.
                          ALV Class Definition
    CLASS lcl_event_receiver DEFINITION.
      PUBLIC SECTION.
        METHODS:
            handle_top_of_list
                FOR EVENT print_top_of_list OF cl_gui_alv_grid,
            handle_end_of_list
                FOR EVENT print_end_of_list OF cl_gui_alv_grid.
    ENDCLASS.                    "lcl_event_receiver DEFINITION
    DATA: o_event_receiver   TYPE REF TO lcl_event_receiver.
                          ALV Class Implementation
    CLASS lcl_event_receiver IMPLEMENTATION.
      METHOD handle_top_of_list.
        DATA: lws_top1(20) TYPE c,
              lws_top2(150) TYPE c,
              lws_top3(150) TYPE c,
              lws_len_file TYPE i,
              lws_file(80) TYPE c,
              lws_file1(100) TYPE c,
              lws_file2(100) TYPE c,
              lws_file3(100) TYPE c.
        WRITE: / text-001.
    *Date
        CONCATENATE text-008 ws_date INTO lws_top1 SEPARATED BY space.
        WRITE : /1 lws_top1.
    Source File Name
        WRITE: / text-009.
        lws_len_file = STRLEN( p_upload ).
        IF lws_len_file < 80.
          MOVE p_upload TO lws_top2.
          WRITE : /1 lws_top2.
        ELSE.
          MOVE p_upload TO lws_file.
          MOVE p_upload+80(48) TO lws_file1.
          DO.
            IF lws_file+79(1) EQ '\'.
              EXIT.
            ELSE.
              CONCATENATE lws_file+79(1) lws_file2 INTO lws_file2.
              SHIFT lws_file RIGHT.
            ENDIF.
          ENDDO.
          IF lws_file2 IS INITIAL.
            MOVE lws_file TO lws_top2.
            WRITE : /1 lws_top2.
            WRITE : /1 lws_file1.
          ELSE.
            CONDENSE lws_file.
            MOVE lws_file TO lws_top2.
            WRITE : /1  lws_top2.
            CONCATENATE lws_file2 lws_file1 INTO lws_file3.
            WRITE : /1  lws_file3.
          ENDIF.
        ENDIF.
      ENDMETHOD.                           "handle_top_of_list
    ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION
    Regards,
    Prakash.

  • TOP of PAGE  using ABAP oo with single CUSTOM CONTROL

    Can anybody please tell me how to handle TOP_OF_PAGE using ABAP OBJECTS with a SINGLE CUSTOM CONTROL and not with  SPLIT CONTAINER(i.e. using single CL_GUI_CUSTOM_CONTAINER and single grid CL_GUI_ALV_GRID  ). Is it possible if so Please help me out?

    Hi Ravi,
    Here is my code. i didn't handle the top_of_page event yet but created a method to handle.
    REPORT  ZSATEESH_ALV_CONTAINER MESSAGE-ID ZZ
                      LINE-SIZE 150 NO STANDARD PAGE HEADING.
    PROGRAM id        :  ZSATEESH_ALV_CONTAINER                         *
    Title             : Sales document report                           *
    Author            : Sateesh                                         *
    Date              :                                                 *
    CR#               :                                                 *
    Dev Initiative    :
    Description       :ALV GRID/LIST Report which displays the sales
                          document header data using ABAP Objects.
                              Modification Log
    Corr. no        date       programmer        description
                    TYPES Declaration
    *--Type for the Header Sales data
    TYPES: BEGIN OF TY_VBAK ,
            INDICAT LIKE ICON-ID,               " Icon
            VBELN   LIKE VBAK-VBELN,            " Sales Document
            AUDAT   LIKE VBAK-AUDAT,            " Document date
            VBTYP   LIKE VBAK-VBTYP,            " SD document category
            AUART   LIKE VBAK-AUART,            " Sales Document Type
            AUGRU   LIKE VBAK-AUGRU,            " Order reason
            NETWR   LIKE VBAK-NETWR,            " Net Value
            WAERK   LIKE VBAK-WAERK,            " SD document currency
         END OF TY_VBAK.
                    DATA Declaration
    *--Tableto hold the header sales data
    DATA: TB_VBAK  TYPE  STANDARD TABLE OF TY_VBAK.
    *--Table to hold the Icons
    DATA: BEGIN OF TB_ICON OCCURS 0,
            ID   TYPE ICON-ID,                  " Icon
            NAME TYPE ICON-NAME,                " Name of an Icon
          END OF TB_ICON.
    *--Declaration of ALV Grid Tables
    DATA: TB_FDCAT         TYPE LVC_T_FCAT,     " Fieldcatalog
          TB_SORT          TYPE LVC_T_SORT.     " Sorting
    DATA: OK_CODE          LIKE SY-UCOMM.       " sy-ucomm
    *--Reference variables for container and grid control.
    DATA: CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
                                                " Container reference
          OBJ_ALV_GRID     TYPE REF TO CL_GUI_ALV_GRID.
    " Alv Grid reference
                      S T R U C T U R E S
    DATA: X_FDCAT          TYPE LVC_S_FCAT,     " Fieldcatalog
          X_LAYOUT         TYPE LVC_S_LAYO,     " layout
          X_SORT           TYPE LVC_S_SORT,     " Sorting
          X_VBAK           TYPE TY_VBAK,        " sales header stucture
          X_ICON           LIKE TB_ICON.        " icons structure
                      C O N S T A N T S
    *--Declaration of Constants
    CONSTANTS :
                C_GREEN(40)    TYPE  C VALUE 'ICON_GREEN_LIGHT',
                C_RED(40)      TYPE  C VALUE 'ICON_RED_LIGHT',
                C_YELLOW(40)   TYPE  C VALUE 'ICON_YELLOW_LIGHT',
                C_X            TYPE  C VALUE 'X'.      " Flag
                      SELECTION SCREEN
    *--Block 1.
    SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETER: P_AUDAT LIKE VBAK-AUDAT
                       DEFAULT '20050101'(003).    " doc date.
    SELECTION-SCREEN: END OF BLOCK B1.
    *--bLOCK 2.
    SELECTION-SCREEN : BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
    PARAMETER :P_ALVDIS AS CHECKBOX.              " For List/Grid
    SELECTION-SCREEN : END OF BLOCK B2.
          Class LC_VBAK  definition
    CLASS  LC_VBAK DEFINITION.
      PUBLIC SECTION.
        METHODS: VBAK_POPULATE,                 " sales header population
                 ICON_POPULATE,                 " Icons population
                 FINAL_POPULATE,                " Final ALV population
                 DISPLAY,                      " Displaying ALV
                 TOP_OF_PAGE FOR EVENT TOP_OF_PAGE OF CL_GUI_ALV_GRID
                                               IMPORTING E_DYNDOC_ID.
    ENDCLASS.                    "LC_VBAK DEFINITION
          Class LC_VBAK IMPLEMENTATION
    CLASS LC_VBAK IMPLEMENTATION.
      METHOD VBAK_POPULATE.
    *-- selecting from VBAK
        SELECT VBELN
                AUDAT
                VBTYP
                AUART
                AUGRU
                NETWR
                WAERK
                INTO   CORRESPONDING FIELDS OF TABLE TB_VBAK
                FROM VBAK
                WHERE AUDAT > P_AUDAT AND
                NETWR  > 0.
        IF SY-SUBRC <> 0.
          SORT TB_VBAK  BY AUART VBTYP WAERK .
        ENDIF.
      ENDMETHOD .                    "VBAK_POPULATE
      METHOD ICON_POPULATE.
    *--selecting from ICON table
        SELECT ID
               NAME
               INTO TABLE TB_ICON
               FROM ICON.
        IF SY-SUBRC = 0.
          SORT TB_ICON BY NAME .
        ENDIF.
      ENDMETHOD .                    "ICON_POPULATE
      METHOD FINAL_POPULATE.
    *--looping through VBAK table into the work area
        LOOP AT TB_VBAK INTO X_VBAK .
          IF X_VBAK-NETWR <= 10.
    *--Reading the ICON table into work area comparing field NAME
            READ TABLE TB_ICON INTO X_ICON WITH KEY NAME = C_GREEN
                                                     BINARY SEARCH.
            IF SY-SUBRC = 0.
              X_VBAK-INDICAT =  X_ICON-ID.
    *--modifying the TB_VBAK table
              MODIFY TB_VBAK FROM X_VBAK.
            ENDIF.
          ELSEIF X_VBAK-NETWR > 10 AND X_VBAK-NETWR < 100.
    *--Reading the ICON table into work area comparing field NAME
            READ TABLE TB_ICON INTO X_ICON WITH KEY NAME = C_YELLOW
                                                     BINARY SEARCH.
            IF SY-SUBRC = 0.
              X_VBAK-INDICAT =  X_ICON-ID.
    *--modifying the TB_VBAK table
              MODIFY TB_VBAK FROM X_VBAK.
            ENDIF.
          ELSEIF X_VBAK-NETWR >= 100.
    *--Reading the ICON table into work area comparing field NAME
            READ TABLE TB_ICON INTO X_ICON WITH KEY NAME = C_RED
                                                     BINARY SEARCH.
            IF SY-SUBRC = 0.
              X_VBAK-INDICAT =  X_ICON-ID.
    *--modifying the TB_VBAK table
              MODIFY TB_VBAK FROM X_VBAK.
            ENDIF.
          ENDIF.
        ENDLOOP.
      ENDMETHOD.                    "FINAL_POPULATE
          METHOD top_of_page                                            *
      METHOD TOP_OF_PAGE.
        PERFORM EVENT_TOP_OF_PAGE USING E_DYNDOC_ID.
      ENDMETHOD.                    "top_of_page
      METHOD DISPLAY.
    *--Building fieldcatalog table
        PERFORM FIELDCATLOG.
    *--FOr making the Layout settings
        PERFORM LAYOUT.
    *--For sorting the fields
        PERFORM SORTING.
    *--perform for displaying the ALV
        PERFORM ALV_GRID_DISPLAY.
      ENDMETHOD.                    "DISPLAY
    ENDCLASS.                    "LC_VBAK IMPLEMENTATION
    *&      Form  FIELDCATLOG
         Building the FIELDCATALOG
    FORM FIELDCATLOG .
      CLEAR: X_FDCAT,TB_FDCAT[].
      X_FDCAT-ROW_POS   = 1.
      X_FDCAT-COL_POS   = 1.
      X_FDCAT-FIELDNAME = 'INDICAT'(004) .
      X_FDCAT-TABNAME   = 'TB_VBAK'(005).
      X_FDCAT-SCRTEXT_L = 'STATUS_INDICATOR'(006).
      APPEND X_FDCAT TO TB_FDCAT.
      X_FDCAT-ROW_POS   = 1.
      X_FDCAT-COL_POS   = 2.
      X_FDCAT-FIELDNAME = 'VBELN'(007) .
      X_FDCAT-TABNAME   = 'TB_VBAK'(005).
      X_FDCAT-SCRTEXT_L = 'SALES DOC'(008).
      APPEND X_FDCAT TO TB_FDCAT.
      X_FDCAT-ROW_POS   = 1.
      X_FDCAT-COL_POS   = 3.
      X_FDCAT-FIELDNAME = 'AUDAT'(009) .
      X_FDCAT-TABNAME   = 'TB_VBAK'.
      X_FDCAT-SCRTEXT_L = 'DOC DATE'(010).
      APPEND X_FDCAT TO TB_FDCAT.
      X_FDCAT-ROW_POS   = 1.
      X_FDCAT-COL_POS   = 4.
      X_FDCAT-FIELDNAME = 'VBTYP'(011) .
      X_FDCAT-TABNAME   = 'TB_VBAK'.
      X_FDCAT-SCRTEXT_L = 'SALES CATEGORY'(012).
      APPEND X_FDCAT TO TB_FDCAT.
      X_FDCAT-ROW_POS   = 1.
      X_FDCAT-COL_POS   = 5.
      X_FDCAT-FIELDNAME = 'AUART'(013) .
      X_FDCAT-TABNAME   = 'TB_VBAK'.
      X_FDCAT-SCRTEXT_L = 'DOC TYPE'(014).
      APPEND X_FDCAT TO TB_FDCAT.
      X_FDCAT-ROW_POS   = 1.
      X_FDCAT-COL_POS   = 6.
      X_FDCAT-FIELDNAME = 'AUGRU'(015) .
      X_FDCAT-TABNAME   = 'TB_VBAK'.
      X_FDCAT-SCRTEXT_L = 'REASON'(016).
      APPEND X_FDCAT TO TB_FDCAT.
      X_FDCAT-ROW_POS   = 1.
      X_FDCAT-COL_POS   = 7.
      X_FDCAT-FIELDNAME = 'NETWR'(017) .
      X_FDCAT-TABNAME   = 'TB_VBAK'.
      X_FDCAT-SCRTEXT_L = 'NET VALUE'(018).
      X_FDCAT-DO_SUM   = C_X.
      APPEND X_FDCAT TO TB_FDCAT.
      X_FDCAT-ROW_POS   = 1.
      X_FDCAT-COL_POS   = 8.
      X_FDCAT-FIELDNAME = 'WAERK'(019) .
      X_FDCAT-TABNAME   = 'TB_VBAK'.
      X_FDCAT-SCRTEXT_L = 'UNIT'(020).
      APPEND X_FDCAT TO TB_FDCAT.
    ENDFORM.                    " FIELDCATLOG
    *&      Module  STATUS_0007  OUTPUT
          module for setting the pf status
    MODULE STATUS_0007 OUTPUT.
      SET PF-STATUS 'ZSTATUS'.
    SET TITLEBAR 'xxx'.
    ENDMODULE.                 " STATUS_0007  OUTPUT
    *&      Module  USER_COMMAND_0007  INPUT
          module  for handling the user commands
    MODULE USER_COMMAND_0007 INPUT.
      OK_CODE = SY-UCOMM.
      CASE OK_CODE.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
        WHEN 'CANCEL'.
          LEAVE TO SCREEN 0.
        WHEN 'EXIT'.
          LEAVE TO SCREEN 0.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0007  INPUT
    *&      Form  LAYOUT
          ALV Layout settings
    FORM LAYOUT .
      CLEAR X_LAYOUT.
    *-- making Layout settings
      X_LAYOUT-GRID_TITLE = 'Sales Header Document'(021).
      X_LAYOUT-ZEBRA      = C_X.
      IF P_ALVDIS =  C_X.
        X_LAYOUT-NO_HGRIDLN = C_X.
        X_LAYOUT-NO_VGRIDLN = C_X.
      ENDIF.
    ENDFORM.                    " LAYOUT
    *&      Form  SORTING
          sub routine for sorting criteria
    FORM SORTING .
      CLEAR X_SORT.
      X_SORT-SPOS = '1'(022).
      X_SORT-FIELDNAME = 'AUART'.
      X_SORT-UP        = C_X.
      APPEND X_SORT TO TB_SORT.
      CLEAR X_SORT.
      X_SORT-SPOS = '2'(023).
      X_SORT-FIELDNAME = 'VBTYP'.
      X_SORT-UP        = C_X.
      APPEND X_SORT TO TB_SORT.
      CLEAR X_SORT.
      X_SORT-SPOS = '3'(024).
      X_SORT-FIELDNAME = 'WAERK'.
      X_SORT-UP        = C_X.
      X_SORT-SUBTOT    = C_X.
      APPEND X_SORT TO TB_SORT.
    ENDFORM.                    " SORTING
    *&      Form  CREATE_CONTAINER_OBJECT
          subroutine to create object of container
    FORM CREATE_CONTAINER_OBJECT .
      CREATE OBJECT CUSTOM_CONTAINER
        EXPORTING
          CONTAINER_NAME              = 'CUST_CONTROL'(025)
        EXCEPTIONS
          CNTL_ERROR                  = 1
          CNTL_SYSTEM_ERROR           = 2
          CREATE_ERROR                = 3
          LIFETIME_ERROR              = 4
          LIFETIME_DYNPRO_DYNPRO_LINK = 5
          OTHERS                      = 6
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " CREATE_CONTAINER_OBJECT
    *&      Form  CREATE_ALV_GRID_OBJECT
          subroutine to create object of ALV GRID
    FORM CREATE_ALV_GRID_OBJECT .
      CREATE OBJECT OBJ_ALV_GRID
        EXPORTING
          I_PARENT          = CUSTOM_CONTAINER
        EXCEPTIONS
          ERROR_CNTL_CREATE = 1
          ERROR_CNTL_INIT   = 2
          ERROR_CNTL_LINK   = 3
          ERROR_DP_CREATE   = 4
          OTHERS            = 5
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " CREATE_ALV_GRID_OBJECT
    *&      Form  ALV_GRID_DISPLAY
          subroutine to call method for displaying the ALV GRID
    FORM ALV_GRID_DISPLAY .
      CALL METHOD OBJ_ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
        EXPORTING
          IS_LAYOUT                     = X_LAYOUT
        CHANGING
          IT_OUTTAB                     = TB_VBAK
          IT_FIELDCATALOG               = TB_FDCAT
          IT_SORT                       = TB_SORT
        EXCEPTIONS
          INVALID_PARAMETER_COMBINATION = 1
          PROGRAM_ERROR                 = 2
          TOO_MANY_LINES                = 3
          OTHERS                        = 4.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL SCREEN 0007.
    ENDFORM.                    " ALV_GRID_DISPLAY
                    START OF SELECTION
    START-OF-SELECTION.
    *--Creating a reference variable for the class LC_VBAK
      DATA : OBJ1 TYPE REF TO LC_VBAK.
    *--Creating a container object
      PERFORM CREATE_CONTAINER_OBJECT.
    *--Creating a ALV GRID control object
      PERFORM CREATE_ALV_GRID_OBJECT.
    *--Creating a object of class LC_VBAK
      CREATE OBJECT OBJ1.
    *--calling vbak population method
      CALL METHOD OBJ1->VBAK_POPULATE.
    *--calling icon population method
      CALL METHOD OBJ1->ICON_POPULATE.
    *--calling fianl table population method
      CALL METHOD OBJ1->FINAL_POPULATE.
    *--calling final  method for display
      CALL METHOD OBJ1->DISPLAY.
    *&      Form  EVENT_TOP_OF_PAGE
          text
         -->P_E_DYNDOC_ID  text
    FORM EVENT_TOP_OF_PAGE  USING    P_E_DYNDOC_ID TYPE REF TO
                                                      CL_DD_DOCUMENT.
    ENDFORM.                    " EVENT_TOP_OF_PAGE

  • How to have custom control in DataGridView display object's value?

    I have a sample project located
    here
    The project has a main form `Form1` where the user can enter customers in a datagridview. The `CustomerType` column is a custom control and when the user clicks the button, a search form `Form2` pops up.
    The search form is populated with a list of type `CustomerType`. The user can select a record by double-clicking on the row, and this object should be set in the custom control. The `DataGridView` should then display the `Description` property but in the background
    each cell should hold the value (ie. the `CustomerType` instance).
    The relevant code is located in the following classes:
    The column class:
    public class DataGridViewCustomerTypeColumn : DataGridViewColumn
    public DataGridViewCustomerTypeColumn()
    : base(new CustomerTypeCell())
    public override DataGridViewCell CellTemplate
    get { return base.CellTemplate; }
    set
    if (value != null && !value.GetType().IsAssignableFrom(typeof(CustomerTypeCell)))
    throw new InvalidCastException("Should be CustomerTypeCell.");
    base.CellTemplate = value;
    The cell class:
    public class CustomerTypeCell : DataGridViewTextBoxCell
    public CustomerTypeCell()
    : base()
    public override void InitializeEditingControl(int rowIndex, object initialFormattedValue, DataGridViewCellStyle dataGridViewCellStyle)
    base.InitializeEditingControl(rowIndex, initialFormattedValue, dataGridViewCellStyle);
    CustomerTypeSearch ctl = DataGridView.EditingControl as CustomerTypeSearch;
    if (this.Value == null)
    ctl.Value = (CustomerType)this.DefaultNewRowValue;
    else
    ctl.Value = (CustomerType)this.Value;
    public override Type EditType
    get { return typeof(CustomerTypeSearch); }
    public override Type ValueType
    get { return typeof(CustomerType); }
    public override object DefaultNewRowValue
    get { return null; }
    And the custom control:
    public partial class CustomerTypeSearch : UserControl, IDataGridViewEditingControl
    private DataGridView dataGridView;
    private int rowIndex;
    private bool valueChanged = false;
    private CustomerType value;
    public CustomerTypeSearch()
    InitializeComponent();
    public CustomerType Value
    get { return this.value; }
    set
    this.value = value;
    if (value != null)
    textBoxSearch.Text = value.Description;
    else
    textBoxSearch.Clear();
    private void buttonSearch_Click(object sender, EventArgs e)
    Form2 f = new Form2();
    DialogResult dr = f.ShowDialog(this);
    if (dr == DialogResult.OK)
    Value = f.SelectedValue;
    #region IDataGridViewEditingControl implementation
    public object EditingControlFormattedValue
    get
    if (this.value != null)
    return this.value.Description;
    else
    return null;
    set
    if (this.value != null)
    this.value.Description = (string)value;
    public object GetEditingControlFormattedValue(DataGridViewDataErrorContexts context)
    return EditingControlFormattedValue;
    public void ApplyCellStyleToEditingControl(DataGridViewCellStyle dataGridViewCellStyle)
    this.BorderStyle = BorderStyle.None;
    this.Font = dataGridViewCellStyle.Font;
    public int EditingControlRowIndex
    get { return rowIndex; }
    set { rowIndex = value; }
    public bool EditingControlWantsInputKey(Keys key, bool dataGridViewWantsInputKey)
    return false;
    public void PrepareEditingControlForEdit(bool selectAll)
    //No preparation needs to be done
    public bool RepositionEditingControlOnValueChange
    get { return false; }
    public DataGridView EditingControlDataGridView
    get { return dataGridView; }
    set { dataGridView = value; }
    public bool EditingControlValueChanged
    get { return valueChanged; }
    set { valueChanged = value; }
    public Cursor EditingPanelCursor
    get { return base.Cursor; }
    #endregion
    private void CustomerTypeSearch_Resize(object sender, EventArgs e)
    buttonSearch.Left = this.Width - buttonSearch.Width;
    textBoxSearch.Width = buttonSearch.Left;
    However, the `DataGridView` is not displaying the text and it also is not keeping the `CustomerType` value for each cell.
    What am I missing?
    Marketplace: [url=http://tinyurl.com/75gc58b]Itza[/url] - Review: [url=http://tinyurl.com/ctdz422]Itza Update[/url]

    Hello,
    1. To display the text, we need to override the ToString method for CustomerType
    public class CustomerType
    public int Id { get; set; }
    public string Description { get; set; }
    public CustomerType(int id, string description)
    this.Id = id;
    this.Description = description;
    public override string ToString()
    return this.Description.ToString();
    2. To get the cell's value changed, we could pass the cell instance to that editing control and get its value changed with the following way.
    public partial class CustomerTypeSearch : UserControl, IDataGridViewEditingControl
    private DataGridView dataGridView;
    private int rowIndex;
    private bool valueChanged = false;
    private CustomerTypeCell currentCell = null;
    public CustomerTypeCell OwnerCell
    get { return currentCell; }
    set
    currentCell = null;
    currentCell = value;
    public CustomerTypeSearch()
    InitializeComponent();
    private void buttonSearch_Click(object sender, EventArgs e)
    Form2 f = new Form2();
    DialogResult dr = f.ShowDialog(this);
    if (dr == DialogResult.OK)
    currentCell.Value = f.SelectedValue;
    this.textBoxSearch.Text = f.SelectedValue.Description;
    #region IDataGridViewEditingControl implementation
    public object EditingControlFormattedValue
    get
    if (this.currentCell.Value != null)
    return (this.currentCell.Value as CustomerType).Description;
    else
    return null;
    set
    if (this.currentCell != null)
    (this.currentCell.Value as CustomerType).Description = (string)value;
    public object GetEditingControlFormattedValue(DataGridViewDataErrorContexts context)
    return EditingControlFormattedValue;
    public void ApplyCellStyleToEditingControl(DataGridViewCellStyle dataGridViewCellStyle)
    this.BorderStyle = BorderStyle.None;
    this.Font = dataGridViewCellStyle.Font;
    public int EditingControlRowIndex
    get { return rowIndex; }
    set { rowIndex = value; }
    public bool EditingControlWantsInputKey(Keys key, bool dataGridViewWantsInputKey)
    return false;
    public void PrepareEditingControlForEdit(bool selectAll)
    //No preparation needs to be done
    public bool RepositionEditingControlOnValueChange
    get { return false; }
    public DataGridView EditingControlDataGridView
    get { return dataGridView; }
    set { dataGridView = value; }
    public bool EditingControlValueChanged
    get { return valueChanged; }
    set { valueChanged = value; }
    public Cursor EditingPanelCursor
    get { return base.Cursor; }
    #endregion
    private void CustomerTypeSearch_Resize(object sender, EventArgs e)
    buttonSearch.Left = this.Width - buttonSearch.Width;
    textBoxSearch.Width = buttonSearch.Left;
    Cell:
    public class CustomerTypeCell : DataGridViewTextBoxCell
    public CustomerTypeCell()
    : base()
    public override void InitializeEditingControl(int rowIndex, object initialFormattedValue, DataGridViewCellStyle dataGridViewCellStyle)
    base.InitializeEditingControl(rowIndex, initialFormattedValue, dataGridViewCellStyle);
    CustomerTypeSearch ctl = DataGridView.EditingControl as CustomerTypeSearch;
    ctl.OwnerCell = this;
    public override Type EditType
    get { return typeof(CustomerTypeSearch); }
    public override Type ValueType
    get { return typeof(CustomerType); }
    public override object DefaultNewRowValue
    get { return null; }
    Result:
    Regards,
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to use custom control.

    hi all,
        how to use custom controls in screen painter.
    can i add image to my screen  using custom control.
    is there any other way to display image on screen.
    give me some notes about custom control.
    and sample programs to display image and also the use of custom control.
    regards,
    bhaskar.

    hi vinod,
    u can use the class <b>cl_gui_picture</b> to work around with pictures on the screen
    just define a custom control on the screen
    create an object of custom container.
    create another object of cl_gui_picture giving container name as the parent name...
    u can check out the class using the transn se24....
    pls post if additional info is required...
    Regards,
    Vs

  • Data Binding for Custom Controls?

    Hello,
    I'm a little bit confused of how to use databinding for custom controls.
    I know i can bind a property, as seen here http://help.sap.com/saphelp_uiaddon10/helpdata/en/91/f0f3cd6f4d1014b6dd926db0e91070/content.htm, but how can I map whole arrays?
    My problem is the following:
    I want to create a custom table control in SAPUI5 (as the default one doesn't provide the neccessary options and properties I need), but I can't seem to find an example how to bind "rows".
    There has to be a way to do this properly. All I can think of now, and implemented, is, passing the name of the variable in the model...
    var x = new my.controls.complex.table({data: "/status"});
    var row1 = new my.controls.complex.columnHeaderRow();
    row1.addColumn(new my.controls.complex.column({text: "", rowspan: "2", colspan: "1", content: "FIRST_COL"}));
    x.addColumnsRow(row1);
    x.placeAt("content");
    ...my JSON/model looks like:
    { "status": [ {"FIRST_COL": "a" , ...}, {"FIRST_COL": "b", ... }, ... ], ... }
    (which should translate into /status/0/FIRST_COL, /status/1/FIRST_COL, ... AFAIK)
    ... and then I use this variable name by getting the application-wide model and use the variable passed as key for the model... (please note, this code is just a snippet)
           var sapCore = sap.ui.getCore();
                if (sapCore !== undefined) {
                 var model = sapCore.getModel().getObject();
                 if (model === undefined || model == [] || model == null){ } else {
                  $.each(model, function(idx, item){
                   $.each(oControl.getColumnsRows(), function(idx, item2) {
                    $.each(item2.getColumns(), function(idx, item3){
                     var content = item3.getContent();
                     if (content !== undefined && content != ""){
                      outpLine = outpLine + "<td>" + model[idx][content] + "</td>";
    ...which still leaves me with the problem of to get an event to react to re-render on changes within the data model, as well as when there would be just an control-specific model, or just a sub-node within a model etc.
    So my question is:
    Is there a way/best practice to define data binding in a custom control and have a way to react on it, and how to react on data changes within a custom control?
    Thanks & KR
    Chris

    I create a entirely new control, from sap.ui.core.Control.
    sap.ui.core.Control.extend("my.controls.complex.table",{... });
    I did define a aggregation...
            aggregations : { columnsRows: {type : "my.controls.complex.columnRow", multiple : true, visibility: "public"}     },
    ...yet I'm still unclear how I work with this aggregation and databinding. I know we can use the bindAggreation functionallity, but since the aggregation is a object (my.control.complex.columnRow) I don't know how my JSON model should be able to bind to that aggregation (as well as how would one be able to cascade a aggregation like this down futher? For example if there is an aggregation in the object of my aggregation?), plus it still doesn't solve my problem of how I can react (for example redraw) on model changes.
    Thanks in advance,
    Chris

  • Adding commandLink to custom control

    I'm trying to create a custom control.
    I want to add a commandLink but really don't know how to bind to an action defined in the faces-config file. The commandLink is just link for navigation.
    I've put my code for the controle in de encodeBegins because i don't really need to use different renderers.
    How can i add the commandLink to my custom control and bind it to an action?
    THe action hasn't to be defined in an argument but is hard coded for now.
    I hope it's clear what i need....

    Hi Poorna,
       Thanks for the reply.
       I have to add field to the txn QM02. User will specify the value for the custom field in this txn and the same should be updated in the database table.
       The field is not a std SAP field, it is added to the table using append structure.
    Thanks,
    Punit

  • Custom control: slider with two needles

    I've been using LabVIEW for some years, and I was able to create a lot of custom controls.
    I know that CVI is doesn't allow me such a level of customization, but I don't know if there is a simple and effective way to create a slider controls with two needles (based on the Vertical Pointer Slide for example).
    I used two different overlapped slides, and they behave more or less as I expected (not fully satisfied, but ...). I need placing a lot of these controls in a panel, so I wonder if I can group the two slides in a custom control, and write some c code to interface with them (if I select Create >>Custom control, I can't select two different controls...)
    Is there another way to create a slider control with two needles?
    Vix
    In claris non fit interpretatio
    Using LV 2013 SP1 on Win 7 64bit
    Using LV 8.2.1 on WinXP SP3
    Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
    Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

    Hey Vix - 
    While I agree it's not quite as straightforward as LabVIEW, you can do exactly what you're talking about with LabWindows/CVI.  The basic instructions to do this are here.  Another good resource is to check out the installed custom controls in <CVI>\toolslib\custctrl, and copy their format.  It sounds like for your particular case, you'd want to create a custom control for a slide control.  Then, in the API for your custom control, you could have a convert function that programmatically created the second slide control for your second needle.  If you need more detail than this, let me know. 
    NickB
    National Instruments 

  • How to remove standard buttons on Custom Control?

    Hi ABAPers,
    How to remove the standard buttons that are appear on custom control and also how to remove the description of line column details.
    Because in my requirement I have to create one custom infotype in which I have to add four custom controllers. In record creation it displaying that buttons and line description. So I want to remove those buttons and line descriptions.
    Could you please give me the solution for this?
    Thanks in advance,
    Regards,
    kishore

    Hi Deepak,
        CALL METHOD G_EDITOR1->SET_TOOLBAR_MODE
          EXPORTING
            TOOLBAR_MODE           = 0
          EXCEPTIONS
            ERROR_CNTL_CALL_METHOD = 1
            INVALID_PARAMETER      = 2
            OTHERS                 = 3.
        IF SY-SUBRC <> 0.
                 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    Regards,
    Kishore.

  • Would you please summarize what the difference between tc and alv?

    hi, experts,
      would you please summarize what the difference between table control and alv base on the function and usage practice.
    for example, as i know:
    1.edit
      tc: can edit in the same screen and save.
      alv: pop up a sub screen to let user edit, so this is unconvenient.
    2.functional button
      alv: can have many functional button as default ,eg. sort, summary and so on
      tc:  developers must implements by himself.
    3.color
      alv: can have and change color
      tc:  cann't changed color
    some client may required the data displayed in alv and edit in tc ,such as example BCALV_EDIT_02.
    above are my idea, experts, would you give me some comments on my opinion and summarize what the difference between those two components? i should make it clear in order to consult the UI with my client.hunger for your advice, thanks!
    Message was edited by:
            liu shaochang

    ALV Grid is basically used for display puropse. It is more user friendly. There are arious features ( such as coloring, sorting, saving to a local file, sedning by mail etc. ) These featurs make ALV Grid a very good option to display the data .
    However , the table control is not only used to display data take from the database table, but also you can do operation such as deletion of data from database table, insertion of data into the database table and updation also. Yeah it has not got the various features whihc ALV has.
    So table control and ALV Grid , if you are just using for display purpose, then ALV Grid is a better option due to its layout and attractive features. But if you want to do the database operations other than display, table control can be used.
    As far as execution is concerned, I think ALV Grid is faster.
    ALV grid control is faster when compared to Table control. But the comaprision is Negligible .
    One of the major differences comes in taking of line items - ALV has an advantage over Table Control when it comes to update database from it.Table control only allows maximum of 999 records at a time where as this limitation is not there in ALV.
    Also,a main feature of ALV Grid is that it contains a standard set of functions. These functions extend beyond the functions of a table control.
    These two UI elements require different keyboard navigation, with ALV Grid being more user-friendly.
    An application can display table data in ALV Grid or in a table control. In some applications you can choose between displaying and editing data in either ALV Grid or a table control. If a configurable button () appears in the right upper corner of the table, it is a table control.
    Basically ALV is a way to display the output and Table Control is designed in screen painter through which you can get entries in Table Control, can delete some records etc for further processing and its not use only for Display.
    ALV is Application List viewer:-
    Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
    In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
    TABLE CONTROL:-
    ABAP offers two mechanisms for displaying and using table data in a screen. These mechanisms are table controls and step loops. Table controls and step loops are types of screen tables you can add to a screen in the Screen Painter.

  • Decorations on Custom Controls

    Hello,
    Attached is a very simple custom control I created. It doesn't work exactly
    as I would like. When the user presses on the decoration part of the
    button, the button does not depress. How can I create a custom button where
    the user can press the decoration and have the button depress?
    Are there some good resources for building custom controls?
    Thanks,
    Peter
    [Attachment Stop.ctl, see below]
    Attachments:
    Stop.ctl ‏5 KB

    Your button does not work since the decoration is an inactive element. It gets the mouse click but it does nothing with it.
    You have to replace the bitmaps of your button with your own bitmaps which have the decoration in front of the button. You can do this in the edit mode of the control editor.
    There is a pdf manual "Custom Controls and Type Definitions Application Note" which can be installed with LabVIEW (option manuals).
    Waldemar
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

Maybe you are looking for