Custom Dashcode widget works fine on mac, but not in iBooks

I wrote a dashcode widget that works fine on my mac but not in iBooks, what am I doing wrong?
I am trying to create a widget that performs a specific calculation when the user inputs the 2 variables. However when I go to preview it on my iPad, the button that performs the calculation disapears. It is visible in the thumbnail, but once you launch to full size... bye bye...
Help is appreciated. Are buttons not allowed?

tk0us wrote:
it sets the size of the widget when displayed as a widget full screen or whatever size the png is
That is not correct. What sets the size of the widget when it runs is the canvas size of the widget, not Default.png.
At the link below, you can find a widget with a Default.png of 140x200 pixels. When you run the widget, it displays at 900x607 pixels.
http://www.triodia.com/staff/michi/drumming/RopeCalc.zip
This demonstrates that Default.png has nothing to do with the size of the widget when it runs. Default.png need not even have the same aspect ratio as the widget canvas.
Michi.

Similar Messages

  • HT4489 address book not loading to icloud?  it works fine in .mac  but not .me com?

    address book not loading in icloud. loads fine in .mac account but .me will not load?

    [email protected] and [email protected] are the same accounts.
    Are you saying that you are trying to sync your contacts to iCloud?  Are the two accounts you  mention ".mac" and ".me" actually different in that they are [email protected]  vs.  [email protected]?  If so, your device can only use one account at once - and you should stick to only one account.

  • Works fine on macs but when i load the page on p.c i get 404 media not foun

    works fine on macs but when i load the page on p.c i get 404 media not found. Which is odd since it works on any mac i've tried on the same network, does anyone have any ideas?

    I too am having the 404 media not found on my blogs, but its on both my mac and pcs. I am wondering if your macs can see it because of them being bound to the server?? Just an idea, which doesn't help me at all. So if you find a way to fix it please please post it.
    Kcam1999

  • I-pod touch works on a Mac but not a PC

    Please help! My I-pod touch works on a Mac but not a PC. When hooked up to a PC, the device is not recognized in I-tunes message, says I-pod in recovery mode and to restore, after checking update and restore, receive unknown error message (9). Have tried unistaling and reinstalling I-tunes, using different USB ports, creating new user, restarting computer, using different PC, and trying to reset by holding sleep/wake and home buttons all to no avail, very, very frustrated, everything is fine on a Mac!!

    I have CA Internet Security Suite Plus 2010, version 6.0.0.264.
    I was wondering about that one in particular.
    Try configuring you CA as per kalda01's instructions in this post:
    http://discussions.apple.com/message.jspa?messageID=10525876#10525876
    (Sometimes switching the security software off doesn't help, but doing the configuration does help. Not sure what's afoot with that, but it has happened with other security-package problems with iTunes in the past.)

  • Html link to pdf works ok on mac but not on ipad. adobe reader for ipad downloaded.

    HTML link to pdf works ok on Mac but not on ipad. Adobe Reader for ipad downloaded. What's wrong?

    Hi pwillener,
    Thank for reply. The pdf’s are in a subfolder “PDF” of the folder holding the web page. The web page itself uses
    . This works in full size computer browsers but not in an iPad.
    My excursion through the search engine has produced the idea of adding #page = requesting page to the URL but I have not had time to try it perhaps without the = sign.
    Bryan

  • Fixed headers while scrolling works fine in bids but not when deployed to reportserver

    Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
    Thanks in advance...............
    Ione

    Hi ione721,
    Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
    View in Internet Explorer 9 by following steps:
    When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
    When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
    The following screenshots are for your reference:
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu

  • My apple id password only works on my mac but not on my iPhone or iPad

    my apple id password only works on my mac but not on my iPhone or iPad what do i do?

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)

  • HT4587 My airport express works on my mac but not I pad or I phone which has been updated to ios7.  Ideas?

    express works on my mac but not I pad or I phone which has been updated to ios7.  Ideas?

    You do know that the controls for AirPlay have been moved in iOS7, correct? 
    Is that what you are asking about here? If yes, you might want to read up a bit on the changes in iOS7.
    Apple - iOS 7 - What's New
    If you are asking about something else, we need more details about the issues.

  • ITunes/Apple Mobile Device works fine w/iPod but not iPad

    Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
    EDIT:
    Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>

    The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
    Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
    Are you able to restart the service after following the steps in that article?

  • Query working fine in toad but not in forms 6i

    i have following coding on when button press triger
    declare
    CURSOR C1(year number,month number) IS
    SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp
    FROM
    select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
    select prod_no,sum(xaq)*1 xaq
    from
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_01_02
    where year=year and f_prd=month
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_02_02
    where year=year and f_prd=month
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_03_02
    where year=year and f_prd=month
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_04_02
    where year=year and f_prd=month
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    group by prod_no
    ) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
    where ci.itm_no=a.prod_no
    and ci.itm_no=c02.itm_no
    and c01.grp_id=c02.grp_id
    and c01.grp_id in(55,56,57,58,59)
    and vpg.prod_no =ci.itm_no
    and vpg.group_id=cpg.group_id
    where XAQ <>0;
    Begin
         delete from fiaz.tmp_topten_prod;
         for i in c1(:year,:month)
    loop
              insert into fiaz.tmp_topten_prod
              values(i.itm_no,i.itm_name,i.qty,i.val,i.gp,0);
         end loop;      
    standard.commit;
    message('inserted in temp');
         exception when others then
              message (dbms_error_text);
              message (dbms_error_text);
    End;
    Same Query (as used in cursor c1) works fine in toad but giving wrong result from forms... and the problem is xaq field i.e returns incorrect qty...
    i guess union clause is not working in this situation...
    plz suggest me the appropriate changes in the query to work well from form as well...
    combination:Forms 6i,Oracle 8.0.6
    Regards,
    Usman Afzal

    As per your suggestion i have created a stored procedure but the followin error prevents procedure creation
    create or replace procedure fiaz.topten_prod(v_yr number,v_mn number) is
    begin
    delete from fiaz.tmp_topten_prod;
    insert into fiaz.tmp_topten_prod(itm_no,itm_name,qty,val,grp_id,prority)
    SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp,0
    FROM
    select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
    select prod_no,sum(xaq) xaq
    from
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq from allied.mrk_01_02
    where year=v_yr and f_prd=v_mn
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_02_02
    where year=v_yr and f_prd=v_mn
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_03_02
    where year=v_yr and f_prd=v_mn
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    union all
    select prod_no, sum(nvl(xrd_sqty,0)) Xaq
    from allied.mrk_04_02
    where year=v_yr and f_prd=v_mn
    and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
    group by prod_no
    group by prod_no
    ) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
    where ci.itm_no=a.prod_no
    and ci.itm_no=c02.itm_no
    and c01.grp_id=c02.grp_id
    and c01.grp_id in(55,56,57,58,59)
    and vpg.prod_no =ci.itm_no
    and vpg.group_id=cpg.group_id
    where XAQ <>0;
    commit;
    end;
    Error:
    "PLS-00201: identifier ALLIED.MRK_01_02 must be declared "
    i have not changed any thing in query working fine in toad without create procedure text and if i describe this table it shows the structure (desc allied.mrk_01_02)
    Now where is the problemmmmm
    Plz Help

  • Can't FLIP a quick RENDER! Works fine in SHAKE but not to flip or Disk!

    Learning with Lynda.com!
    Part 1 has you rendering two files, one is a still image, the other a quicktime movie, I don't have the money for premium so I got my own clouds movie (.mov) and added a still plane.
    I key framed 1 - 100 and playing it back its fine in shake, but not on FLIP or DISK, its nothing but a still image. Have done it 5 times making sure that all the right buttons are on, or not, and as I said, it works INSIDE of shake but won't RENDER to FLIPBOOK!
    I don't suppose anyone wants to send me the exercise files? (on knees begging LOL) I am a member, just can't afford $300 for one pop and this is really the only program I need to learn.
    Thanks!

    Sorry if I'm pointing out something obvious that you already know. Have you checked the time range in the render dialog? Shake does not fill in the values for you automatically, and defaults to "1" so only renders the 1st frame. It needs to be set to eg "1-100".

  • Apple TV working fine with Wireless, but not on Ethernet

    I just got an Apple tv for my B-day and I can't get the Ethernet port to work.
    It works fine on wireless but if i plug in the cable to my 5 port switch that then goes to my router it will not login to the store, or sync or fine youtube. It has and ip and everything. I tried opening that port 38 something. And no go? Does anyone have any ideas?
    I have a 2wire router, and one 5 port switch, the PS3, Wii and Xbox all work on the switch just fine.
    I even upgrade to firmware 2.01

    Thanks for your help guys
    I have tried another ethernet cable but no go. I'm going to get a new one at the store today. As for the IP. the first time I plugged it in the IP was way diffrent from the one on my router so i manually added the new ip and subnet mask etc etc. And still no go. It is seen in itunes but tells me it can't sync. And if i go to the Apple TV it will not open any of the web enabled features. No you tube, no store, no nadda.

  • Customized selectBooleanCheckbox works fine on Firefox but not IE, Opera?

    I'm using a customized selectBooleanCheckbox solution to give me a 'select all' like feature:
    <h:form>
    <h:dataTable binding="#{DialogManager.bean.nodeTable}" value="#{DialogManager.bean.nodeList}" var="nodeItem" border="1" cellpadding="10" cellspacing="1" >
        <h:column>
            <f:facet name="header">
               <h:selectBooleanCheckbox value="#{DialogManager.bean.selectAll}" valueChangeListener="#{MultipleSelectionDialog.allSelected}" immediate="true" onchange="this.form.submit();" />       
            </f:facet>
            <h:selectBooleanCheckbox value="#{nodeItem.selected}" />       
        </h:column>
    </h:dataTable>
    </h:form>When a user clicks on the selectBooleanCheckbox in the header, the other selectBooleanCheckboxs should also be selected. This works on Firefox, but not on IE or Opera. On IE, the checkbox in the header is selected and none of the checkboxs beneath it are selected. On Opera, the checkbox in the header is only selected for a moment before it is deselected.
    Why would this happen? How can I fix it for IE and Opera?

    tried onclick instead of onchange, no difference.
    The IE browser produces browser failure messages:
    'elements' is Null or not an object
    container.jsp row 325
    'elements.dialog:act' is Null or not an object
    container.jsp row 381
    Code: 0 Character 3I checked in the corresponding files and cannot make sense of the error messages.

  • HTML Mashup works fine in Silverlight, but not in UI5

    Hello community,
    we are building an integrated Customer Service Management solution for a Client of ours, via the SAP Cloud for Customer platform (solution for Services).
    Currently, we are trying to embed some external Business Process activities in our Service Tickets UI Screens, by using HTML Mashups. Our reference has been the standard Cloud Application Studio documentation, and some well-written articles here on the SCN, such as the following: HTML script mashup - launched from an Embedded Component by Vinita Sinha.
    In our solution, the HTML Mashup has been connected via a Port Binding interface to the C4C UI Layer, in a way to pass it some relevant information such as the Ticket ID, the Customer ID and the Cause Category ID, as shown in the picture below:
    We built a custom Port Binding object, but if you use the Standard "Ticket Information" port Binding (in category "Productivity & Tools"), the effect will be the same. The Standard Port Binding we used in the Mashup Authoring configuration floorplan is the following:
    In addition, we discovered that, in our case, this Mashup development works just in Silverligh Web Interface, but not in UI5. While in Silverlight we are able to consume and correctly interact with our Mashup, in UI5 we can see just an empty pane stuck at the initial "Loading..." screen, as shown below:
    We opened an incident with the SAP Support for our system, and we have been told to try to build the Mashup can work just with no Port Binding specified. Indeed, if we remove the Input Port Binding from the Mashup configuration, the screen seems to work fine even in UI5, as shown below:
    Unfortunately, this technical constraint does not cover sufficiently our Business Scenario, because the Mashup should be initialized with our Service Ticket (and Customer) data.
    Has anybody ever experienced this kind of issue? And how did you solve it? If it has no resolutions, is there available any possible workaround?
    Thanks a lot for your contributions.
    Cheers,
    Davide

    Hi Pragya,
    thank you for the update.
    Another question: could you please give us any reference about these corrections you told about? Maybe they could be relevant in our case too.
    Our raised incident number is: 3100851983
    Kind regards,
    Davide

  • Lightbox widget works properly on dreamweaver but not on internet browser

    Hi,  I am using Dreamweaver CS5 & I used lightbox gallery widget through insert widget on insert panel menu. I edited the image source so everything seems working fine when I preview it on live button (local view). but when i try to view it on internet browser, it only shows the picture and when I click on the photo, it will come out at the very end of the page instaed of just zooming in & make the background darker. Here's the link of my webpage that I am talking about. http://www.thefamily-connect.com/Pages/Tina%20&%20mike%20photos.html
    I have the same problem with Spry Image Slideshow, when I view on internet browser, it says error 404 is found.
    What am I missing to make these widget work in internet.  kindly  email me your reply at [email protected]
    Thanks!
    Joyce Forrest

    sorry, I did not have experience about this... I can only read your problem.

Maybe you are looking for