Custom data for equipment load from ECC to CRM 7.0

Dear All,
Please suggest the steps required to trace the initial/delta load data for equipment from ECC to CRM & carry out the enhancement for missing fields data.
Thanks & Regards
DB

Hi,
You have to use download object CRM_EQUI_LOAD. First ensure that all the materials and business partners from ECC to CRM are downloaded.
For more details jut go through
http://help.sap.com/saphelp_sm40/helpdata/en/94/657a3b233b8541a18ed80b424bf1f8/frameset.htm
Best Regards,
Rajendra

Similar Messages

By using middleware how data can be passed from ecc to crm?

By using middleware how data can be passed from ecc to crm?

Hello,
If middleware setup is done for the data exchange between ECC and CRM, then you can use customizing objects
(available in txn R3AC3) and business objects (available in txn R3AC1) , and condition/pricing related objects in available in txn R3AC5, which can be used for extracting data from R/3 to CRM. You can also find some upload objects for uploading the data
from CRM to R/3.
You can use transaction R3AS, to perform the initial load of customizing/Biz objects.
Once initial load is done, any delta changes would come automatically to CRM by means of delta load.
You also have request load, using which you can download range of materials/BPs which are missing or needs to be updated in CRM.
If you have any specific questions, let me know.
Hope this helps!
Best Regards,
Shanathala Kudva.

Equipment Replication from ECC to CRM 6.0

Hi Gurus,
I am trying to Replicate equipments from ECC to CRM 6.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
Sharath.

Hi Sharath,
I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
I have done the following steps:
1. Created a category for the object family 0401 and assigned the relevant set types to it.
2 Maintained the settings for downloading equipments into CRM at:
SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
3. Activated BADI CRM_EQUI_LOAD
On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it. When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
Would appreciate if you could share how did you solve your problem.
Thanks in advance for the help!

BPC - Consolidation - Data Loading - Will BS/PL accounts data ONLY be loaded from ECC?

Dear All,
In BPC, when we load data from ECC for Consolidation, my understanding is that we load only BS and PL accounts' data for/by the entity.
Apart from BS and PL data, will there be any data that will have to be loaded into BPC for consolidation?
The following three financial statements -
-Statement of Cash Flow
-Statement of Changes in Equity
-Statement of Comprehensive Income
are actually derived/calculated from the loaded BS and PL data. This is my understanding. Pls. correct me if I am wrong.
Thank you!
Regards,
Peri

Hi Peri,
Balance sheet, PL and those three financial statements are derived from BS/ PL accounts, however, there should also be "flow" information. Otherwise you won't end up with a correct consolidated cash flow or equity movement. ( or you can prefer to enter flow detail manually)
Second thing is, while getting BS & PL accounts, you will also need trading partner detail, otherwise you won't be able to do the eliminations. (or you can prefer to manually enter trading partner detail for intercompany accounts)
Thirdly, you should also consider other disclosures. (Depending on what standart you are implementing - IFRS, US GAAP, Local Gaap whatever...)
Hope this gives an idea.
Mehmet.

User status transfer for sales orders from ECC to CRM

Hi,
We use business process with CRM sales orders that are transfer to ERP.
Users can change user status in the sales orders in ERP.
How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
What is the steps to do this for CRM 7.0?
Denis

Hi,
We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

Replication failing for BP Organization from ECC to CRM

When a BP type Organization is created in ECC the replication to CRM is failing in the middleware with the message R11 126 u2013 BP Category 2 does not fit in the category 1.
The BP type person replicates correctly and the replication from CRM to ECC is good for both types, Organization and person.
When I debug the middleware I can see where it is failing: in the function FM BUPA_CREATE_FROM_DATA line 655. The FM is comparing the person category with organization category which ends in program error.
Is there any table in CRM to map the BP types? Or is this an SAP error?
Thank you,
Aubrey Smith

Hi Aubrey
Please refer to Note 1311313. It may assist with your issue.
Hope it helps
If not I suspect you may need to log an OSS with SAP.
Regards
Arden

Customer classification data from ECC to CRM

Dear Friends,
We have the middleware active between ECC and CRM for customers. Now we have the requirement to download customer classification data (XD03->Extras->Classification) from ECC to CRM. Please suggest me how we can map this data in CRM and what middleware developments are required?
Thanks,
Rajinikanth G

Added new fields using AET and did Middleware enhancements as per the note - Note 736595 - Exchange of EEW fields with R/3 customer master.
Thanks,
Rajinikanth G

Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

Hi All,
I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
Please help me as to how to resolve this issue.
Thanks in advance,
Shubham

Hi Shubham,
Please check the queues in SMQ2 and what status they are showing?.
Thanks,
Faisal

BPC75NW: Error Loading Master data for BPC Dimensions from BW InfoObject

Hello Gurus,
I'm trying to load master data for BPC Dimensions from BW Infoobjects.
The ID thats used in BW is 32 char long. When I run the load, the ID is truncated after 20 chars and the records are reported as duplicates.
Due to this the load is failing.
I cannot use any other ID as the texts will not be loaded in that case.
Is there any work around to handle this?
I cannot load the transaction data either.
I looked at some posts and blogs in sdn, but nothing really helped.
Cube - 0RPM_c05 (Financial Planning cube in SAP PPM)
Version: BPC 7.5 NW SP5
Thanks,
Vasu

Thanks Everyone.
" you can write a transformation file and give a new name to those IDs who have values more than 20 characters."
Poonam - Could you explain more?
I tried using a additional Dimension property to hold the 32 char ID. But I cannot access this in the transformation.
Is there a way to refer the dimension property in the Transformation file or in the UJD_ROUTINE BADI implementation?
Thanks,
Vasu

Replication of CUSTOMER from ECC to CRM

Hi CRM Guru
Is that anyway to download the partner function (sold-to, ship-to, payer, bill-to, employee) in the customer sales area data from ECC to CRM (created as BP relationship in CRM) in the INITIAL LOAD?
For example:
Customer in ECC 100000000 have the partner function in the partner function tab under the sales area data
SP Sold-to = 100000000
SH Ship-to = 100000001
PY Payer = 100000002
BP Bill-to =100000003
And create those relationship in CRM under the Relationship area.
Please advice.
Thank you

Hi.
If what you are trying is to replicate the partner functions as relationships, first be sure that you have replicate the customer (the main and the others on partner functions sales areadata) using the middleware object CUSTOMER_MAIN.
Then run the object CUSTOMER_REL for the main partner. This will result on the relationship creation at CRM side, representing the partner functions on R/3 site.
Be aware that if in R/3, the main partner represents all the partner functions, when it is replicated into CRM, the system does note create a relationship to himself, but this not means that the partner can be used in sold to party, payer, ship to and bill to partner functions on documents.
Regards.
SM

Equipment download from ECC 6.0 to CRM 7.0

Hi Guys,
I am trying to Replicate equipments from ECC 6.0 to CRM 7.0
I did all the activities as specified still encountering issue while replicating.
I did following activities
1) Default settings
OLTP-EQ-0401-0401-X(Delta)
2) BADI - CRM_EQUI_LOAD_STDIMP (Activated)
3) Specify adapter object for uploading objects
0401 - DNL_EQUIPMENT
I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
A) I checked SMQ1, SMQ2 - No Queues are blocked.
B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
I checked the BDOC Message for the passed lines in SMW01 it says
1) Start of Initial load.
2) No Objects were selected.
In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
Please correct me if I am following a wrong process or forward me the check list for Equipment load.
I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
Please advice.
Thanks,
SURESH.

Hi,
go to ERP.
check there the table CRMRFCPAR
Is there an entry for OBJ_NAME EQUIPMENT?
If no create it.
If yes check this entry if everything looks fine.
Afterwards start a new initial load.
Best regards
Manfred

Problem in delta changes from ECC to CRM for Customers created in CRM systm

Dear all,
I am replicating customers between CRM and ECC and vice versa. The Delta changes are replicating from CRM to ECC system, but not happening from ECC to CRM system.
I have created some customers in CRM system and changed some address data, those changes are perfectly updating in back end ECC system.
But when I make some changes for the same customer from ECC system, those changes are not updating back in the CRM system.
I could not get the problem where exactly is coming. I request your expertise to help me in resolving this issue. I believe all middleware and pide settings are correct.
Your suggestions are highly appreciated.
Best regards
Raghu ram

Hi Shanthala,
Thank you very much for your prompt response, I have checked Customer_main adapter object in R3AC1, no filter has been found there.
and in R3 table TBE31, I could not find entry for CRS_CUSTOMER_COLLECT_DATA for APPLK = BC-MID.
As well in CRMRFCPAR table I could see X assigned to field named with 'In Queue Flag', but I could not find DISCARDDAT for CRM (User) settings.
Kinldy help me to resolve the issue.
Your suggestions will be highly appreciated.
Best regards
Raghu ram

Download ztable data from ECC to CRM 7.0

Hi,
I have created ztable in ECC and CRM 7.0,(tables are same).Now I want to downlaod data from ECC to CRM.
Table should only be updatable from ECC. No maintenance required in CRM.How to achieve this?
Please suggest me.
Thanks,
Brahmaji

create customizing adapter objects in R3AC3.
copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code.
load object in R3AS.
create a variant and shedule the based on requirement

Error in Initial Load of Products from ECC to CRM

Hi ,
Im getting below errors In initial load of MATERIAL from ECC to CRM.
Data cannot be maintained for set type COMM_PR_MAT
Data cannot be maintained for set type COMM_PR_UNIT
Data cannot be maintained for set type COMM_PR_SHTEXT
My Analysis is
I found these set types are already assigned in other base category and around 100+ materials are created using this base category.
After initial load of DNL_CUST_PROD1, i found these set types are not assigned to any of the categories of hierarchy R3PRODSTYP. Since R3PRODSTYP is not having above set types, my initial load is failing.
Required Solution
Is there any other way, I can download materials from ECC to CRM, with out deleting the existing materials and Z hierarchy created earlier from CRM.
Regards,
Prasad
Message was edited by:
SAP CRM

Hi there,
Try to attach the Set Types:
"COMM_PR_MAT", "COMM_PR_UNIT", "COMM_PR_SHTEXT", COMM_PR_BATCH, COMM_PR_LGTEXT, COMM_PR_LGTEXT1,COMM_PR_LGTEXT2,
to the Category "MAT_" and then run the Initial load again.
It should work now unless you have some other issues.
Best regards,
Pankaj S.

BUPA_REL BDOC's from ECC to CRM BP Contact PersonRelationship DATES wrong

Hello SDN community,
BUPA_REL BDOC's - from ECC to CRM - BP Contact Person Relationship (BUR001) - Valid From & Valid To dates are not replicating correctly.
Within ECC,
when a Business Partner's Contact Person relationship (BUR001) is modified, such that one relationship is ended
and the "Valid To" relationship is set to todays date (ie. 20/01/2012).
AND then another Contact Person relationship is created for the BP, with a Valid From date that is set to tomorrow (ie. 21/01/2012) and
the Valid To date is set to 31.12.9999.
THEN the BDOC processing occurring in CRM is setting the relationship dates in CRM incorrectly.
ie. The VALID FROM date is set to 01.01.01 and
the VALID TO date is set to 31.12.9999.
Does anyone have any ideas/solution for this or a similar experience?
Thanks in advance
Andrew Clarkson

Hi, Andrew Clarkson
1630644 - No validity period in standard contact person relationship
This is SAP standard behaviour
Due to technical reasons, the partner function assignments are not time-dependent and the validity period of the contact person relationship cannot be considered by the automatic partner determination in the CRM applications. Therefore the maintenance of the start and end for the contact person relationship in CRM is deactivated in the standard system.
A possible workaround is to use a customer-defined relationship category (copy of standard), which can be customized without any limitations.
Regards,
Denis

Custom data for equipment load from ECC to CRM 7.0

Similar Messages

Maybe you are looking for