Custom DB table conversion

Hi,
We would like to convert one of the custom DB table in Production to make it client dependent. We would like to know what will be effects when the transport request with adjusted table is transported into Production. Many thanks for your help.

Hello Vinoth,
Do u already have data in the custom table which u want to make client dependant?
If not u can goto SE11 add the MANDT field and activate the table and the table is not client dependant.
If there is alreay data in the table then the table will not get activated after u add MANDT field to it. Save the table and goto SE14. Enter the table name and select tables and press EDIT.Press adjust and activate with save data radiobutton selected.

Similar Messages

  • Custom condition Table Error

    Hi
    I am trying to download a custom condition table A807 from R3 to CRM.
    I did maintain the field and created a Adapter object naming ZDNL_COND_A807 and tried intial download.
    But I am getting error as one of the field is intial.
    Please let me know what you did to resolve the issue as I see you too were trying to download a custom contidion table.
    thanks
    Raj

    Hi Raj
    Check: See if all the fields for your customizing table are available in CRM.
    Check table CND_MAPC_CNV_FLM for SAP standard fields.
    If not, proceed as folowing:
    1 - insert a new entry in table CND_MAPM_CNV_FLM (via SM30) without conversion if the field as the same value in CRM,
    or with conversion if the field has a different value in CRM example: sales org value in CRM is different from R/3)
    2 - Insert the same fields in structure CND_MAPT_ACS_REM_CUST
    3 - Create the same fields in the field catalogue of CRM (this will add new entries to structure CRMT_ACS_I_PRE)
    4 - Implement BADI CRM_COND_COM_BADI and in method ITEM_COMMUNICATION_STRUCTURE insert a code to send the content
    of your field to the pricing communication strucuture to IPC. For instance:
    u had to add the field route to my communication structure so I add the following code in that method:
    METHOD IF_EX_CRM_COND_COM_BADI~ITEM_COMMUNICATION_STRUCTUR E.
    CS_ACS_I_COM-ZZROUTE = CS_ACS_I_COM-GEOROUTE.
    ENDMETHOD.
    ZZROUTE is the field from my custom pricing table
    GEOROUTE is the field in my sales order.
    5 - Then download DNL_CST_CNDALL again and your
    Z_DNL_CUST_A<R3table> again.
    try it works
    Cheers
    Ranga

  • How to use customer extension table for schedule line for shopping cart ?

    Dear Experts,
    One of our client wants to have schedule lines in shopping cart item. I am thinking of using customer extension table at item level for shopping cart. Could you please help me on  how I should proceed with the appending the structures so that the end user can fill the shopping cart schedule line details?
    Which fields should I consider in such cases?
    Thanks and regards,
    Ranjan

    Hi.
    I guess you use SRM 7.0. Please go to IMG.
    SRM -> SRM Server -> Cross-Application Basic Settings -> Extensions and Field Control (Personalization) -> Create Table Extensions and Supply with Data
    Regards,
    Masa

  • Report Custom Vertical Table Question

    Hello Guys,
    I am trying to display some data in a custom vertical table (for a report). The data that I have looks like this :
    Customer number          Name               Product          Age
    123               John Customer          Checking     50
    456               Jane Customer          Savings          40
    When I display it using a vertical table (or attribute value pairs) the data looks like:
    Customer number: 123
    Name : John Customer
    Product: Bank Account
    Age: 50
    Customer number: 456
    Name : Jane Customer
    Product: Bank Account
    Acct No: 40
    But I want to display the data like this:
    Customer number: 123 456
    Name : John Customer Jane Customer
    Product: Bank Account Bank Account
    Age: 50 50
    The option here is to change the data to dynamic columns rather than dynamic rows. I tried manipulating the templates but it would not do it. Any other suggestions?
    Thanks!

    Hi Badri,
    OK - this is what I did (there's no documentation as such, so I'll just give you the step-by-step guide here!):
    1 - In your application, go to Shared Components then Templates
    2 - Click the Create button
    3 - Click the "Report" option
    4 - Select "From Scratch" and click Next
    5 - Enter a name for the new template (for example, "Vertical Report"), leave the Theme as your current theme, set Template Class to "Custom 1", tick the "Named Column (row template)" option and click Create
    This creates a new blank report template - scroll down the list of templates to this new one and click on the name to edit it.
    In there, you need to enter the following:
    Row Template 1 setting:
    &lt;td&gt;
    &lt;table cellpadding="0" border="0" cellspacing="0" summary="" class="t18Standard" style="border-collapse:collapse"&gt;
    &lt;tr&gt;&lt;td class="t18Data"&gt;#1#&lt;/td&gt;&lt;/tr&gt;
    &lt;tr&gt;&lt;td class="t18Data"&gt;#2#&lt;/td&gt;&lt;/tr&gt;
    &lt;tr&gt;&lt;td class="t18Data"&gt;#3#&lt;/td&gt;&lt;/tr&gt;
    &lt;tr&gt;&lt;td class="t18Data"&gt;#4#&lt;/td&gt;&lt;/tr&gt;
    &lt;/table&gt;
    &lt;/td&gt;NOTE: In my example report, I show four columns (EMPNO, ENAME, SAL, COMM) - these are refered to as #1#, #2#, #3# and #4# above (#1# means column number 1, #2# is column 2 and so on - but use the column numbers not the names in your template). If you have a different number of columns add in or remove lines of: &lt;tr&gt;&lt;td class="t18Data"&gt;#nn#&lt;/td&gt;&lt;/tr&gt; (replacing nn with the column number)
    Leave all other settings in the Row Templates section blank
    Before Rows setting:
    &lt;table cellpadding="0" border="0" cellspacing="0" summary="" style="border-collapse:collapse;"&gt;
    &lt;tr&gt;
    &lt;td&gt;
    &lt;table class="t18Standard" cellpadding="0" border="0" cellspacing="0" summary="" style="border-collapse:collapse;"&gt;
    &lt;tr&gt;&lt;th class="t18ReportHeader"&gt;EMPNO&lt;/th&gt;&lt;/tr&gt;
    &lt;tr&gt;&lt;th class="t18ReportHeader"&gt;ENAME&lt;/th&gt;&lt;/tr&gt;
    &lt;tr&gt;&lt;th class="t18ReportHeader"&gt;SAL&lt;/th&gt;&lt;/tr&gt;
    &lt;tr&gt;&lt;th class="t18ReportHeader"&gt;COMM&lt;/th&gt;&lt;/tr&gt;
    &lt;/table&gt;
    &lt;/td&gt;NOTE: You will need one TR tag for each of the column headings - I have four here (EMPNO, ENAME, SAL and COMM) - add or remove lines of &lt;tr&gt;&lt;th class="t18ReportHeader"&gt;COLUMNNAME&lt;/th&gt;&lt;/tr&gt;
    After Rows setting:
    &lt;/tr&gt;
    &lt;/table&gt;
    &lt;table&gt;
    &lt;tr&gt;
    &lt;td&gt;
    #PAGINATION#
    &lt;/td&gt;
    &lt;/tr&gt;
    &lt;/table&gt;Leave all settings in the Pagination section blank
    NOTE: Any "class" name used above assumes that you are using Theme 18 (t18Standard is the standard report style class, for example) - you will have to update these to match your own theme
    Click Apply Changes to save this
    Now go back to your page and click on the "Report" link for your report region - this takes you to Report Attributes. Scroll down to the "Report Template" setting and change this to your new template. Click Apply Changes to save that.
    When the page is rendered, a new table will be created for the report, the headings will be created within another table in the first TD on that table. All data lines are created as separate tables within new TD tags - this makes the output go across the page instead of down.
    Andy

  • How to add the entries and how to delete the entries from custom Z-table?

    Hi Experts,
    My requirement is I need to add the entries from program to three custom z-tables . Assume as zabc1,zabc2,zabc3.
    Here how to add the entries from program to Z-table.???
    And one more requirement is I want to provide a deletion checkbox in selection screen . Initial it was unchecked. If I am giving tick mark then the entries should be deleted from above custom Z-tables. this all will done in backgroung job?
    Could you please guide me the logic how to crack this???
    Let me know if you need more Info
    Thanks
    Sanju

    Hi Sanjana,
    What you can do is to use the ABAP keyword INSERT or MODIFY to add or modify records to a given database table. Here are the syntax taken from SAP documentation:
    *Insert Statement
    INSERT dbtab
    Syntax
    INSERT { {INTO target VALUES source }
           | {     target FROM   source } }.
    Effect
    The INSERT statement inserts one or more rows specified in source in the database table specified in target. The two variants with INTO and VALUES or without INTO with FROM behave identically, with the exception that you cannot specify any internal tables in source after VALUES.
    System Fields
    The INSERT statement sets the values of the system fields sy-subrc and sy-dbcnt.
    sy-subrc Meaning
    0 At least one row was inserted.
    4 At least one row could not be inserted, because the database table already contains a row with the same primary key or a unique secondary index.
    The INSERT statement sets sy-dbcnt to the number of rows inserted.
    Note
    The inserted rows are finally included in the table in the next database commit. Up until this point, they can still be removed by a database rollback.
    *Modify Statement
    MODIFY dbtab
    Syntax
    MODIFY target FROM source.
    Effect
    The MODIFY statement inserts one or several lines specified in source in the database table specified in target, or overwrites existing lines.
    System fields
    The MODIFY statement sets the values of the sy-subrc and sy-dbcnt system fields.
    sy-subrc Meaning
    0 At least one line is inserted or changed.
    4 At least one line could not be processed since there is already a line with the same unique name secondary index in the database table.
    The MODIFY statement sets sy-dbcnt to the number of processed lines.
    Note
    The changes are transferred finally to the database table with the next database commit. Up to that point, they can be reversed using a database rollback.
    Hope it helps...
    P.S. Please award points if it helps...

  • Problem in creating a Generic Extractor on a custom 'Z' table

    This is regarding an earlier question I posted in sdn today. I am trying to create a generic extractor on a custom 'Z' table and iam getting the following message.
    Invalid extract structure template YBW_Z3PVR of DataSource YCNA_3PVAR_RPT
    Message no. R8359
    Diagnosis
    You tried to generate an extract structure with the template structure Z3PVR. This operation failed, because the template structure quantity fields or currency fields, for example, field MENGE refer to a different table.
    Procedure
    Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
    Please advise. how do i solve this?

    Hi there,
    Is your Z* table working? It must be add check field for quantity field and currency field.
    Hope this helps.

  • Custom PL/SQL API that inserts the data into a custom interface table.

    We are developing a custom Web ADI integrator for importing suppliers into Oracle.
    The Web ADI interface is a custom PL/SQL API that inserts the data into a custom interface table. We have defined the content, uploader and an importer. The importer is again a custom PL/SQL API that will process the records inserted into the custom table and updates the STATUS column of the custom interface table. We want to show the status column back on the spreadsheet.
    Defined the 'Document Row' import rule and added the rows that would identify the unique record.
    Errored row import rule, we are using a SELECT * from custom_table where status<>'Success' and vendor_name=$param$.vendor_name
    The source of this parameter is import.vendor_name
    We have also defined an Error lookup.
    After the above setup is completed, we invoke the create document and click on Oracle->Upload.
    The records are getting imported, but the importer program is failing with An error has occurred while running an API import. The ERRORED_ROWS step 20003:ER_500141, parameter number 1 must contain the value BIND in attribute 1.'

    The same issue.
    Need help.
    Also checked bne.log, no additional information.
    <bne:document xmlns:bne="http://www.oracle.com/bne">
    <bne:message bne:type="DATA" bne:text="BNE_VALID_ROW_COUNT" bne:value="11" />
    <bne:message bne:type="DATA" bne:text="BNE_INVALID_ROW_COUNT" bne:value="0" />
    <bne:message bne:type="ERROR" bne:text="An error has occurred while running an API import"
    bne:cause="The ERRORED_ROWS step 20003:ER_500165, parameter number 1 must contain the value BIND in attribute 1."
    bne:action="" bne:source="BneAPIImporter" >
    <bne:context bne:collection="collection_1" />
    </bne:message><bne:message bne:type="STATUS"
    bne:text="No rows uploaded" bne:value="" >
    <bne:context bne:collection="collection_1" /></bne:message>
    <bne:message bne:type="STATUS" bne:text="0 rows were invalid" bne:value="" >
    <bne:context bne:collection="collection_1" /></bne:message></bne:document>

  • Custom Data Table in Work Manager 6.1 / SMP 3.0

    Hi folks,
    was trying to create a custom Data Table in Work Manager. Unfortunately I was not successful to get it working - probably I am missing out something.
    Have created the DataTable in the Agentry Editor and configured the Java Class to use the DataTable class like for the other DataTables. Then created the 4 config values in the parameters of the Mobile Application Configuration (DT_MDOID, TABLE_CHECK, TABLE_REFRESH, ENABLE_TABLE). Also created a MDO that is mapped to the DT_MDOID which is derived from the /SYCLO/CL_CORE_DT_HANDLER class.
    During sync, I am getting the following errors in the server logs - in the client it is Error 13 => Java...
    08/13/2014 18:18:36, 1,         0,         2, Thr      10364, class RCP<class DT::DataTable>, D:\Syclo_BuildBot\rc_7.0server\Syclo\refcount.h#220:RCP<class DT::DataTable>::operator ->
    2014/08/13 18:18:36.505:             + BackEnd=Java-SAPJavaConnection
    2014/08/13 18:18:36.505:               Using Java code for <DATA_TABLE_NAME>
    2014/08/13 18:18:36.506:               Java Exception "<DATA_TABLE_NAME>" Update Data Table: - java.util.NoSuchElementException
    Do you have some pointers on what I may miss out?
    Cheers,
    Florian

    Make sure that 'DT_MDOID" parameter entries are maintained correctly "That there is no typo's" in config panel. I don't think you need any entries for TABLE_CHECK, TABLE_REFRESH, ENABLE_TABLE parameters which are only relevant for complex table.  Same in Agentry  the data table should match with  SAP name.
    Let me know if you still have issues.
    Thanks
    Manju

  • Synchronizing Two Custom Z Tables Using Abap Program

    Hi,
        My requirement is Synchronizing two custom z tables using abap program me.
    I have vendors in two tables, i have to select the common vendors from first which are existing in second  table also.
    In first table each vendor can have more than one supplier types in one field only. In second table these supplier types are divided into
    different fields.
         My requirement is I have to check supplier types in first table and i have to pass X to corresponding supplier types in second table vendor.
    I have to pass X value for each depending in Second table depending upon supplier type in first table.
    . How to do it can any one suggest with code.
    Thanks in Advance,
    Vivek
    <subject edited by moderator>
    Message was edited by: Manish Kumar

    Hi,
    Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
    For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
    Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
    Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
    If the key of Table2 is vendor no & vendor type, then do a read table for the key.
    The logic in pseudo-code:
    Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
         extract the vendor types in to itab Table1New.
         Select the vendor & types from Table2 by using the for all entries option (better performance).
         loop at Table1New
              check in Table2:
                   if the unique key is vendor no: check all fields for the vendor type from Table1New
                   if the unique key combo is vendor no & type: check by using a read table.
              If not found => add entry to Table2
         endloop.
    endselect Table1 (when using package size)
    I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
    Good luck!
    Best regards,
    Zhou

  • Change documents for customer Z table - serious help wanted

    Hi all,
    I am no beginner and I don't expect any comments from beginners.
    Situation: My customer wants to replace the material valuation transactions MRN1 MRN2 MRN3 due to bad performance and locking problems with own developed programs.
    The valuation results will be stored in a customer Z-Table on a monthly base. For auditing and transparency purposes, this Z-table has to get a change object and the update routines will have to write change documents.
    Due to the expected size of the new Z-table, it is not advisable to simply switsch on table logging.
    In this huge project (and in none I participated!) nobody ever implemented the change document process for a Z-table. <b>BUT EVERYBODY CAN TELL YOU THI IS NO PROBLEM AT ALL.</b>
    I read some documentation at SAP and serached for threads or blogs here. I could not find anything desribing that in depth.
    So before I start, I'd be happy to get some hints from people who created own change documents and implemented the process. Links to documentation and other helpful pages are also welcome.
    If I can keep the process simple, I'd like to create a BLOG on this - because I think, in the future it will get more and more difficult to pass the auditing process with undocumented features and uncontrolled table changes.
    TIA.
    Regards,
    Clemens

    Hi,
    Please check this thread.
    http://www.sapdevelopment.co.uk/tips/changedoc/cd_createch.htm
    Once you create your change document object using generate update pgm option then  please check the WRITE document fm.
    I have done this long back i am updating CDHDR and CDPOS for 2 table YATT and YATTPLANTS. Here YATT have single record (header table) and YATTPLANTS have multiple records (item table)
    function yatt_write_document           .
      call function 'CHANGEDOCUMENT_OPEN'
        exporting
          objectclass             = 'YATT           '
          objectid                = objectid
          planned_change_number   = planned_change_number
          planned_or_real_changes = planned_or_real_changes
        exceptions
          sequence_invalid        = 1
          others                  = 2.
      case sy-subrc.
        when 0.                                   "ok.
        when 1. message a600 with 'SEQUENCE INVALID'.
        when 2. message a600 with 'OPEN ERROR'.
      endcase.
    if upd_yctc                           ne space.
       call function 'CHANGEDOCUMENT_SINGLE_CASE'
         exporting
           tablename              = 'YATT                          '
           workarea_old           = o_yatt
           workarea_new           = n_yatt
            change_indicator       = upd_yattc
            docu_delete            = 'X'
         exceptions
           nametab_error          = 1
           open_missing           = 2
           position_insert_failed = 3
           others                 = 4.
        case sy-subrc.
          when 0.                                "ok.
          when 1. message a600 with 'NAMETAB-ERROR'.
          when 2. message a600 with 'OPEN MISSING'.
          when 3. message a600 with 'INSERT ERROR'.
          when 4. message a600 with 'SINGLE ERROR'.
        endcase.
      endif.
      if upd_yctcauthplnts                  ne space.
        call function 'CHANGEDOCUMENT_MULTIPLE_CASE'
          exporting
            tablename              = 'YATTPLANTS                 '
            change_indicator       = upd_yattplants
            docu_delete            = 'X'
          tables
            table_old              = yyattplants
            table_new              = xyattplants
         exceptions
           nametab_error          = 1
           open_missing           = 2
           position_insert_failed = 3
           others                 = 4.
        case sy-subrc.
          when 0.                                "ok.
          when 1. message a600 with 'NAMETAB-ERROR'.
          when 2. message a600 with 'OPEN MISSING'.
          when 3. message a600 with 'INSERT ERROR'.
          when 4. message a600 with 'MULTIPLE ERROR'.
        endcase.
      endif.
      call function 'CHANGEDOCUMENT_CLOSE'
        exporting
          objectclass             = 'YATT           '
          objectid                = objectid
          date_of_change          = udate
          time_of_change          = utime
          tcode                   = tcode
          username                = username
          object_change_indicator = object_change_indicator
          no_change_pointers      = no_change_pointers
        exceptions
          header_insert_failed    = 1
          object_invalid          = 2
          open_missing            = 3
          no_position_inserted    = 4
          others                  = 5.
      case sy-subrc.
        when 0.                                   "ok.
        when 1. message a600 with 'INSERT HEADER FAILED'.
        when 2. message a600 with 'OBJECT INVALID'.
        when 3. message a600 with 'OPEN MISSING'.
    *    WHEN 4. MESSAGE A600 WITH 'NO_POSITION_INSERTED'.
    * do not abort, if positions are not inserted!!!
        when 5. message a600 with 'CLOSE ERROR'.
      endcase.
    endfunction.
    a®

  • How to Import customized internal table to smartform from Print Program

    Hi Gurus,
    I want to Import customized internal table to smartform from print program, Can anybody tell me how it is possible.
    With regards,
    S.Saravanan

    There is no problem passing an internal table to a smarforms, smartforms have the same interface as a function module ([Defining the Form Interface|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm] in [Smart Forms|http://help.sap.com/saphelp_nw70/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm]) so could you elaborate a little more on your requirement (is it a standard a custom forms, etc.)
    Regards,
    Raymond

  • INSERT in the custom database table to create a new entry.

    Hello Experts,
    I'm trying to INSERT the entry in my custom databse table that i have created. But I'm not sure what i'm missing as i'm getting the sy-subrc = 4 after the INSERT statement and my records are not added to the database table.
    I'm using the INSERT as below:-
          APPEND gw_relax TO gt_relax.
          INSERT  INTO zmm_bg_relax VALUES gw_relax.
    Please let me know your helpful responses on this,
    Thanks,
    Naveen

    Check [INSERT dbtab|http://help.sap.com/abapdocu_70/en/ABAPINSERT_SOURCE.htm] [FROM TABLE itab [ACCEPTING DUPLICATE KEYS]|http://help.sap.com/abapdocu_70/en/ABAPINSERT_SOURCE.htm#&ABAP_ALTERNATIVE_2@2@],
    If the addition ACCEPTING DUPLICATE KEYS  is specified, all rows are inserted for which this is possible. The remaining rows are rejected and sy-subrc is set to 4. The system field sy-dbcnt  is set to the number of lines that are inserted.
    So if you get sy-subrc = 4, some of the records of the internal table are already contained in the database table.
    You cannot put 2 or more records in a database table with the same primary key, primary keys are unique keys with the addition of a not-null constraint. If you need multiple records with a same key, you must add another key to the primary key. (use a timestamp or a counter)
    Regards,
    Raymond

  • User provisioning to custom DB tables

    Hi All,
    I have a requiremnt where I need to provision users to custom DB tables(user table,role table and user_roles).
    We need to treat this as a test app which will be used for further implementations.
    what are the ways to achieve this?
    1.using GTC-Will it allow me to provision to 2 different tables? and how?
    2.normally defining the IT resourse-But I am not sure how the where will I define the table names to whcih I need to provision
    Anyways,
    I am using OOTB connectors
    Thanks as always

    hmm...rite...
    Do i need to specify the Status Lookup Code and status attribute values.I just need to implement this requirement for further implementation of the workflows..
    Once I clicked next..the admin console returned to the home page with the following error in the log file
    10/04/07 05:45:57 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
    *ERROR,07 Apr 2010 06:47:59,750,[org.apache.struts.actions.DispatchAction],Dispatch[CreateConnector] to method goNext returned an exception*
    java.lang.reflect.InvocationTargetException
    *     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.CreateConnectorAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.UnsupportedClassVersionError: Bad version number in .class file
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:465)
         at com.thortech.xl.dataobj.tcADPClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:242)
    Edited by: watisoim on Apr 7, 2010 4:47 AM
    My OIm uses jdk1.5 and the connector is in 1.6...i already raised this issue i received earlier bt oracle say its nt the issue with jd version
    Edited by: watisoim on Apr 7, 2010 4:57 AM

  • User exit  with a field in custom z table

    hi ..
    I have a custom z table with a z field in it. This z field is linked with t800d data base table. when a report is executed using this t800d table they want text data from the z field, but it is not displaying . they said the possible solution would be defining  a user exit. how can i do this?

    Hi,
    Your requirement is not clear. Can you explain a bit.
    Regards,
    Atish

  • Population of custom LIS tables thorugh MFBF transaction

    Hello Friends,
    I have created a custom LIS tables S728 for Shop floor control (04) and it is updated though REM Backflush (transaction MFBF). But some of the fields are not populated. Can someone help me to understand how this LIS table is populated? I am looking for piece of code where this table is populated.
    I see some includes inside main program for MFBF transaction related to LIS structures, but control does not stop there in while debugging MFBF Tran code.
    Any direction/suggestion will help.
    Thanks.
    Sujoy

    I added the following code at the beginning of the user exit and was able to prevent the execution of user exit for S031, S032 and S033 during reload of old material documents using OLI1 or OLI2.
    DATA: lv_ex_flg TYPE c.
    DATA: lfd_string TYPE string VALUE '(SAPLMCB1)XMCINF[]'.
    FIELD-SYMBOLS : <fs1> type any,
            <fs2> type any,
            <fs> TYPE table,
            <fs_wa> TYPE any.
    IF sy-tcode EQ 'OLI1' OR sy-tcode EQ 'OLI2'.
    ASSIGN (lfd_string) TO <fs>.
    IF sy-subrc EQ 0.
    LOOP AT <fs> ASSIGNING <fs_wa>.
       ASSIGN COMPONENT 'LOW' OF STRUCTURE <fs_wa> TO <fs1>.
       ASSIGN COMPONENT 'HIGH' OF STRUCTURE <fs_wa> TO <fs2>.
       IF <fs1> EQ 'S031' OR
         <fs1> EQ 'S032' OR
         <fs1> EQ 'S033'.
         lv_ex_flg = '1'.
         EXIT.
       ELSEIF <fs2> EQ 'S031' OR
              <fs2> EQ 'S032' OR
               <fs2> EQ 'S033'.
         lv_ex_flg = '1'.
         EXIT.
       ELSEIF <fs2> EQ 'S920' OR
               <fs1> EQ 'S920'.
         EXIT.
       ENDIF.
    ENDLOOP.
    ENDIF.
    ENDIF.
    CHECK lv_ex_flg NE '1'.

Maybe you are looking for

  • BW workbook and roles

    Hi guru I have a problem : I have one role in PFCG  for access from BEX to the query of an infocube. Under this role there are some workbook saved by the user. My question is : if I cancel the role all the workbook are lost ? Is there a Way to save t

  • At starting, the browser looks darker(blacker) all it, and that is it to the end. Nothing is seen, and so it can't be used. Help!

    I have used the browser since I started surfing the web; I love it. However, it's been a month now since it started showing me a darker screen that couldn't let me anything. Yet the trademark that usually appears on the left angle is no longer shown

  • Inserting tuples in a ResultSet without populating changes to the database

    Hello,      After statement.executeQuery(A_SQL_STATEMENT), I got a ResultSet object, however, I want to insert many extra tuples into the final ResultSet before it being iterated and println() its content. I try the following possible solutions, but

  • Detecting the current window in Forms 4.5

    Hello, Is there a way to detect the current window that is in use? I want to find the window's x/y coordinates to center another form or LOV on top of it. Thanks for any help you can provide. Frank

  • Delete project

    How do I delete a project from the toolkit? I have already deleted the directory containing the project, but it still won't let me make a new project with the same name. TIA. Judy