Custom Delivery channel

Hi,
Has Anyone sucessfully implemented a custom delivery channel for BI Publisher standalone.
Please do let me know
Regards
Glen

Thank you Ike. I'm looking at the bursting documentation and it appears as though you can reference the out of the box delivery channels in the config, but is it possible to reference a custom delivery channel in the bursting config? I tried a sample and I'm getting an "unknown delivery channel error"...
select
b.product as KEY,
b.template_name as TEMPLATE,
'RTF' as TEMPLATE_FORMAT,
'en-US' as LOCALE,
b.format as OUTPUT_FORMAT,
*'customDelivery' as DEL_CHANNEL,*
'C:\Temp' as PARAMETER1,
b.product & '.' & b.format as PARAMETER2
from
bursting_configuration b
In my example custom delivery is defined in xdodelivery.cfg
<channels>
<channel name="customDelivery">com.test.bip.delivery.FileDeliveryRequestFactory</channel>
</channels>
</config>
The jar file is in
\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF\lib
Any ideas?
Edited by: user9932522 on Oct 21, 2009 7:17 AM

Similar Messages

Custom Delivery Channel - How to register under BI Pub Enterprise, oc4j

I'm trying to register my custom delivery channel in BI Publisher Enterprise with the .
I copied my custom jar "customchannel.jar" file under :
D:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF\lib
I modified the file xdodelivery.cfg by adding :
customdeliverychannel.FileDeliveryRequestFactory
This file is located under
D:\OracleBI\xmlp\XMLP\Admin\Delivery
I also copied it under D:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\resource
When I burst a report, I have the message :"Unknown delivery Channel"...meaning my custom channel is not registered, I assume...
My bursting request is to me ok.
Do you have an idea to solve my issue?
have you ever implemented custom delivery channel in BI Publisher Entreprise?
Thank you in advance.

Thank you Ike. I'm looking at the bursting documentation and it appears as though you can reference the out of the box delivery channels in the config, but is it possible to reference a custom delivery channel in the bursting config? I tried a sample and I'm getting an "unknown delivery channel error"...
select
b.product as KEY,
b.template_name as TEMPLATE,
'RTF' as TEMPLATE_FORMAT,
'en-US' as LOCALE,
b.format as OUTPUT_FORMAT,
*'customDelivery' as DEL_CHANNEL,*
'C:\Temp' as PARAMETER1,
b.product & '.' & b.format as PARAMETER2
from
bursting_configuration b
In my example custom delivery is defined in xdodelivery.cfg
<channels>
<channel name="customDelivery">com.test.bip.delivery.FileDeliveryRequestFactory</channel>
</channels>
</config>
The jar file is in
\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF\lib
Any ideas?
Edited by: user9932522 on Oct 21, 2009 7:17 AM

How to create a CUSTOM AQ internal delivery channel.

Hi,
I want to use a custom AQ internal delivery channel for inbound. Can someone please help me in the configuration details.

Hi Manindra,
You can either create a new URI or use the existing one. It's up to your requirement and use case. URI is nothing but the destination location on which B2B thread hear to pick the message and connects to pass the message.
Regards,
Anuj

Unable to set Internal delivery channel in B2B 11g

Hi
I am very new to B2B
I have some doubts that i want to clear
I am not sure whether the internal delivery channel will be automatically set in B2B 11g
I created an agreement for one of the external trading partner from host trading partner
When I try to deploy the agreement it is failing with the validation error
I don't know what is the error but I am believing that the internal delivery channel is not set for my host trading partner
I have two question's here
1. How to set Internal delivery channel in 11g B2B if it is not automatically set. If it is set what is it
2. Where can I find the log file on server. I want to get the details of the validation error occuring while I am deploying the agreement
Any help is greatly appreciated
Thanks
Vijay Sai.S

Hi
Now I want to define a custom IDC using HTTP.
How Can I do that
If go to channels tab for my TP and select HTTP as channel, I am not able to save it and the error is Unable to create an IDC with HTTP as method.
Can you tell me how can I create custom IDC
I don't want to use QUEUE channel for IDC.
Secondly do I have to give proper details of my TP?
I mean to say I that I want to just deploy an agreement for testing purpose by just giving some dummy details of my TP connection.
What if I don't have proper details of my TP connection
Thanks for the log file path
I found it.
I couldn't find any extra details in it though
Thanks
Vijay Sai.S

E-Business Suite XML Publisher 5.6.3 FAX Delivery Channel

Hi All,
If anyone of you who has implemented FAX delivery channel for XML Publisher 5.6.3 version, share your experience. Which software you used for delivery faxes from EBusiness Suite?
XML Publisher guide mentions eFax and FAX4CUPS. Tim D's blog has an entry about Advanced Collections functionality with RightFax. Any pros and cons about these softwares?
Regards,
Parth

Parth
Depends on what you need. If you need to manage thousands of faxes a day and have some multi fax board solution then something like RightFAX will work - its goiing to cost you thou. If your needs are more meager and you dont mind getting stuck into some custom code, then XMLP coupled with a CUPS server can do the job. If you want some middle ground and out of the box integration check out STR Software's solution. Again, its not free but they are a great bunch of folks with a great product. They will stand up faxing in a matter of days with some really neat integration with the conc manager pages - www.strsoftware.com
Thats my 2 cents, Im sure there are plenty of other 'real' customers out there that have opinions.
Cheers
Tim

Using Weblogic JMS for internal delivery channel

hi,
I want my B2B to talk to back-end application through Weblogic JMS queues. I have configured internal delivery channel for this. I am getting error message 'Max retry exceeded' in b2b_idc_transport.log
2008.09.24 at 12:09:53:713: B2BStarter thread: (DEBUG) initialize TransportReceiver: [WLIOutbound_TServer < jms > < Wholesale >]
2008.09.24 at 12:09:53:713: B2BStarter thread: (DEBUG) JMSReceiver.init() started ....
2008.09.24 at 12:09:53:713: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2008.09.24 at 12:10:03:704: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2008.09.24 at 12:15:03:428: B2BStarter thread: (ERROR) Max retry exceeded, closing everything
java.lang.Exception: Max retry exceeded
     at oracle.tip.transport.basic.jms.JMSMonitor.reconnect(JMSMonitor.java:833)
     at oracle.tip.transport.basic.JMSReceiver.init(JMSReceiver.java:333)
     at oracle.tip.transport.b2b.B2BTransport.init(B2BTransport.java:379)
     at oracle.tip.adapter.b2b.transport.AppTransportInterface.initialize(AppTransportInterface.java:282)
     at oracle.tip.adapter.b2b.engine.Engine.initialize(Engine.java:512)
     at oracle.tip.adapter.b2b.init.B2BServer.initialize(B2BServer.java:280)
     at oracle.tip.adapter.b2b.init.B2BStarter.startB2B(B2BStarter.java:297)
     at oracle.tip.adapter.b2b.init.B2BStarter.run(B2BStarter.java:143)
     at java.lang.Thread.run(Thread.java:534)
I have applied latest patch 7322333.
kindly let me know what is workaround for this? also, how can do debugging of this issue in B2B.
Thanks in advance.
Regards,
Vaibhav
Edited by: vaibs on Sep 26, 2008 12:15 AM

hi Sinkar,
Thanks for reply. I have checked connectivity from b2b server to weblogic server, using java stub. Stub can connect to the Q successfully.
here is my b2b.log
2008.09.24 at 12:09:49:233: main: B2B - (DEBUG) B2B initialize
2008.09.24 at 12:09:49:233: Main thread: B2B - (DEBUG) This is Main thread executing..
2008.09.24 at 12:09:49:233: Main thread: B2B - (DEBUG) B2B start
2008.09.24 at 12:09:49:233: Main thread: B2B - (DEBUG) B2B start - context started
2008.09.24 at 12:09:49:233: B2BStarter thread: B2B - (DEBUG) B2BStarter - This is B2BStarter thread executing..
2008.09.24 at 12:09:49:233: B2BStarter thread: B2B - (DEBUG)
Maximum Heap Size = 530907136
Memory Allocated = 8323072
Free Memory = 842560
2008.09.24 at 12:09:50:544: B2BStarter thread: BusinessLogicLayer - (INFORMATION) ExecutionContextManager initialization is done
2008.09.24 at 12:09:50:544: B2BStarter thread: BusinessLogicLayer - (INFORMATION) User's maxCachedSessions is set to 0
2008.09.24 at 12:09:50:560: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2008.09.24 at 12:09:51:762: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2008.09.24 at 12:09:51:762: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2008.09.24 at 12:09:51:762: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration oained
2008.09.24 at 12:09:51:762: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2008.09.24 at 12:09:51:793: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (NIFORMATION) Repository:print: [10] Custom Document over Internet
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2008.09.24 at 12:09:51:981: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
2008.09.24 at 12:09:52:355: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:initialize Enter
2008.09.24 at 12:09:52:355: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:header name: ebXML SOAP Envelope
2008.09.24 at 12:09:52:355: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:header name: ebXML SOAP Message Header
2008.09.24 at 12:09:52:386: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:initialize Exit
2008.09.24 at 12:09:52:402: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2008.09.24 at 12:09:52:433: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2008.09.24 at 12:09:52:511: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2008.09.24 at 12:09:52:511: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2008.09.24 at 12:09:52:511: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2008.09.24 at 12:09:52:543: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2008.09.24 at 12:09:52:558: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2008.09.24 at 12:09:52:558: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2008.09.24 at 12:09:52:574: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2008.09.24 at 12:09:52:574: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2008.09.24 at 12:09:52:574: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2008.09.24 at 12:09:52:574: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
2008.09.24 at 12:09:52:574: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = STATUS
2008.09.24 at 12:09:52:605: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting http://localhost
2008.09.24 at 12:09:52:605: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: http://localhost port = 7777
PROTOCOL_ENDPOINT = null
2008.09.24 at 12:09:52:636: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Wholesale_Transport_Server < http > < Wholesale >]
2008.09.24 at 12:09:53:682: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
2008.09.24 at 12:09:53:682: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = WARNING
2008.09.24 at 12:09:53:698: B2BStarter thread: B2B - (INFORMATION) Repository:getInternalDeliveryEndPointList: Putting jms://[email protected]
2008.09.24 at 12:09:53:698: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize main Endpoint loop jms://[email protected]
2008.09.24 at 12:09:53:698: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize looping through transport Endpoint: jms://[email protected]
2008.09.24 at 12:09:53:698: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize add jms transport Endpoint: jms://[email protected] {Destination Provider Properties=java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://10.76.168.156:7010, jms.receiver.destination_password=weblogic, Connection Factory Location=weblogic.jws.jms.QueueConnectionFactory, jms.receiver.jndi_connection_factory_location=weblogic.jws.jms.QueueConnectionFactory, isTopic=false, Message Type=bytes, jms.receiver.is_topic=false, jms.receiver.factory_provider_properties=java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://10.76.168.156:7010, transport_callout_waittime=30, jms.receiver.jndi_destination_provider_properties=java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://10.76.168.156:7010, jms.receiver.polling_interval=10, polling_interval=10, Factory Provider Properties=java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://10.76.168.156:7010, jms.receiver.jndi_destination_location=[email protected], jms.receiver.destination_username=weblogic}
2008.09.24 at 12:09:53:713: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [WLIOutbound_TServer < jms > < Wholesale >]
2008.09.24 at 12:35:52:276: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2008.09.24 at 12:35:52:276: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2008.09.24 at 12:35:52:276: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2008.09.24 at 12:35:52:276: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2008.09.24 at 12:35:52:276: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2008.09.24 at 12:35:52:884: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2008.09.24 at 12:35:53:087: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
2008.09.24 at 12:35:53:087: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
Thanks,
Vaibhav
Edited by: vaibs on Sep 28, 2008 3:20 AM

B2B message Id propagated back to Internal Delivery channel.

Hi
I am interested to find out if there is any mechanism to get the message Id of the document sent by the B2B server back to the internal delivery channel. My requirement is to update the application that sent out a message to the partner via the B2B gateway after I receive an acknowledgment back from the TP. I am using RNIF, so I will be using the exchange level ack. I am also curious to know if B2B can send any control information about the doc exchange status through the internal delivery channel like Status, time sent, messageId etc.
Very urgent.
Thanks
Anteneh

Thanks for the quick turn around the issue. I need help on following
I set up two b2b instances. I am sending 3A4 document as a custom document on AS2 protocol. I have two issues:
1. my sender receives a MDN (acknowledgement) if we send syntactically correct data to partner. state of transaction when i look at the sender side 'business message status report' is changed to 'complete'.
when we send syntactically wrong data MDN is not generated by receiver and the sender side logs show the transaction state as 'waiting for ack'. receiver side 'business message status report' show the transaction as 'Error'.
I turned on the flag 'is acknowledgement handled by Integration b2b' to 'yes' on both sender and receiver side
2. The positive ack which is received by the sender, which changes the state of transaction to complete, I expected it to be posted on to IP_In_queue. But I dont see it there. I am using 'b2buser' to dequeue the message.

Error: Couldn't find delivery channel for message

Hi All,
In our production environment, we sometime get the following error (Channel Audit Log):
2009-01-12 15:08:47 Error Unable to find channel ID
2009-01-12 15:08:47 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Couldn't find delivery channel for message: 496b9e98-9466-0109-e100-8000ac10a218.
2009-01-12 15:08:47 Error The message status set to NDLV.
This particular interface runs around 100 times a day without any issues, however around once or twice a month we get this error.
This is a synchronous interface.
Could be because of number of threads alloted for Synchronous messages in Visual Admin.
Thanks.

Hi XIer
try doing a CPACache Refresh:
Http://<host>:50000/CPACache/refresh?mode=full)
Best regards,
Chris

Session Replication doesn't work when using a custom Unicast Channel

Hello!
After configure a WLS Cluster for an WebApp with session replication support enabled I faced some issues with cluster configuration.
My LAB env used for this configurations is:
One Solaris 10 SPARC box.
-- One WLS 11g (10.3.6) domain with:
---- 4 Managed servers:
---- Admin server
---- server-1
---- server-2
---- Proxy Server (HttpClusterServlet)
--- 1 Cluster composed by:
---- server-1
---- server-2In that setup I noticed if I define a custom network channel for servers ( server>protocols>channels ) in the cluster and set Cluster Messaging Mode as Unicast* in the Cluster config ( Cluster>Configuration>Messaging>Messaging Mode ), so the session state replication does not work.
When I enable the cluster replication debug for managed servers the following messages appears:
<> <> <1358966729933> <BEA-000000> <[roid:-1772481434088297851] Creating primary for application key /webapp>
####<Jan 23, 2013 4:45:29 PM BRST> <Debug> <ReplicationDetails> <de25503> <server-1> <[ACTIVE] ExecuteThread: '5' for queue: > 'weblogic.kernel.Default (self-tuning)'> <<ano
nymous>> <> <> <1358966729958> <BEA-000000> *<Has secondary servers? false>*
####<Jan 23, 2013 4:45:29 PM BRST> <Debug> <ReplicationDetails> <de25503> <server-1> <[ACTIVE] ExecuteThread: '5' for queue: >'weblogic.kernel.Default (self-tuning)'> <<ano
nymous>> <> <> <1358966729959> <BEA-000000> *<Current secondary server? null>*
####<Jan 23, 2013 4:45:29 PM BRST> <Debug> <Replication> <de25503> <server-1> <[ACTIVE] ExecuteThread: '5' for queue: >'weblogic.kernel.Default (self-tuning)'> <<anonymous>
<> <> <1358966729959> <BEA-000000> <[roid:-1772481434088297851] Unable to create secondary on null>
####<Jan 23, 2013 4:45:31 PM BRST> <Debug> <ReplicationDetails> <de25503> <server-1> <[ACTIVE] ExecuteThread: '5' for queue: >'weblogic.kernel.Default (self-tuning)'> After eliminate all possible issues with my webapp (serialization, weblogic descriptor configuration, etc) and try many cluster network configurations I noticed that this problem only occurs when I use Unicast for Cluster's Messaging.
At the end of the day I really would like to understand why the session replication only works for Cluster's Messaging using Multicast mode. I read a lot the WLS docs (specifically the cluster/network topics) [1][2], but I can't find an official explanation about this.
Can someone help me understand this behavior?
Many thanks.
[1] http://docs.oracle.com/cd/E15523_01/web.1111/e13701/network.htm
[2] http://docs.oracle.com/cd/E15523_01/web.1111/e13709/setup.htm

I have Fluxbox started with Slim and .xinitrc. Dbus works only with:
exec ck-launch-session startfluxbox
you need run Openbox with ck-launch-session:
exec ck-launch-session openbox-session
Bye!!

Could not deliver the output for Delivery channel:null

XML Publisher Report Bursting Program is throwing the following exception
Log file
========
XML/BI Publisher Version : 5.6.3
Request ID: 11900899
All Parameters: Dummy for Data Security=Y:ReportRequestID=11900819:DebugFlag=Y
Report Req ID: 11900819
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:DB94
Preparing parameters
null output =/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900899.out
inputfilename =/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900819.out
Data XML File:/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900819.out
Set Bursting parameters..
Temp. Directory:/caop/app02/common/caopcomn/temp
[071713_110919401][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.1.0 - Production
[071713_110919410][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=11900819, user-variable:cp:language=en, user-variable:cp:responsibility=21540, user-variable.OA_MEDIA=http://db172.coresys.com:17204/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=11900819, user-variable:cp:locale=en-US, user-variable:cp:user=PRAYAPUDI, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=11900899, user-variable:cp:org_id=0, user-variable:cp:reportdescription=Care One Salary Change Approval, user-variable:cp:Dummy for Data Security=Y}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Output File
========
<?xml version="1.0" encoding="UTF-8" ?>
- <BURS_REPORT>
<REQUESTID>11901286</REQUESTID>
<PARENT_REQUESTID>11901285</PARENT_REQUESTID>
<REPORT_DESC>Care One Salary Change Approval</REPORT_DESC>
<OUTPUT_FILE>/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11901286.zip</OUTPUT_FILE>
- <DOCUMENT_STATUS>
<KEY />
<OUTPUT_TYPE>EXCEL</OUTPUT_TYPE>
<DELIVERY>email</DELIVERY>
<OUTPUT>/caop/app02/common/caopcomn/temp/071713_120851408/xdo1_2.xls</OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error!! Could not deliver the output for Delivery channel:null . Please check the Log for error details..</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
XML File
======
<?xml version="1.0" encoding="ISO-8859-1"?>

<CAO_SAL_CHG_APR>
<LIST_G_EMAIL>
    <G_EMAIL>
      <EMAIL>[email protected]</EMAIL>
      <LIST_G_MESSAGE_NUMBER>
<G_MESSAGE_NUMBER>
          <MESSAGE_NUMBER>1</MESSAGE_NUMBER>
          <PERCENT_CHANGE>-98.75</PERCENT_CHANGE>
          <SALARY_CHANGE_AMT>-23,621.00</SALARY_CHANGE_AMT>
          <DATE_CHANGE_MADE>07/16/2013</DATE_CHANGE_MADE>
          <APPROVER_NAME>Veluz, Cynthia Avila</APPROVER_NAME>
          <APPROVER_JOB>Administration|Center|Payroll/Benefits Coordinator</APPROVER_JOB>
          <PERSON_NAME>Donet, Andrew P</PERSON_NAME>
          <PERSON_NUM>131996</PERSON_NUM>
          <LOCATION_CODE>HR - CareOne at Morris ALF</LOCATION_CODE>
          <REGION_2>NJ</REGION_2>
          <JOB_TITLE>Administration|Center|Director of Admissions</JOB_TITLE>
          <CURRENT_ANNUAL_SAL>299.00</CURRENT_ANNUAL_SAL>
          <PREVIOUS_ANNUAL_SAL>23,920.00</PREVIOUS_ANNUAL_SAL>
          <PAY_BASIS>PERIOD</PAY_BASIS>
          <CUR_PAY>11.50</CUR_PAY>
          <CHANGE_DATE>07/21/2013</CHANGE_DATE>
          <SALARY_CHANGE_REASON></SALARY_CHANGE_REASON>
          <EMPLOYMENT_CATEGORY>Fulltime-Regular</EMPLOYMENT_CATEGORY>
          <ERIC_WILLIAMS>[email protected]</ERIC_WILLIAMS>
        </G_MESSAGE_NUMBER>
      </LIST_G_MESSAGE_NUMBER>
    </G_EMAIL>
</LIST_G_EMAIL>
</CAO_SAL_CHG_APR>
Control File
========
<?xml version="1.0" encoding="UTF-8" ?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="CAO_SAL_CHG_APR/LIST_G_EMAIL/G_EMAIL">
<xapi:delivery>
<xapi:email server="smtp.coresys.com" port="25" from="[email protected]" reply-to="[email protected]">
<xapi:message id="123" to="[email protected]"
attachment="true"
subject="Salaries Changed Yesterday">
Please do not reply to this email, it is system-generated.
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="Care_One_Salary_Change_Approval" output-type="EXCEL"   delivery="123">
<xapi:template type="rtf" location="xdo://CAO.CAO_SAL_CHG_APR.en.US/?getSource=true">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
It is greatly apprecaited, if you can take a look the issue.
Thank you,
-Pradeep.

Hello Sir,
I am hard coding the Email id in the control file. From/To/CC emails I have hard coded. I want to paste the Control file... But I could not because, not allowing me to post XML content.
Thanks
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
     <xapi:request select="/EMPLOYEE_REPORT/EMPLOYEE">
          <xapi:delivery>
               <xapi:Email server="mycompanyserver" port="25" From="[email protected]" reply-to ="[email protected]">
                    <xapi:message id="123" to="[email protected]" cc="[email protected]"
                         attachment="true" subject="Employee Details for ${FULL_NAME}"> Mr./Ms. ${FULL_NAME}, Please review the attached document
                    </xapi:message>
               </xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
     <xapi:template type="rtf" location="xdo://XBOL.TEST_ABC_XML.en.US/?getSource=true">
     </xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9367932 on Apr 13, 2010 4:59 AM
Edited by: user9367932 on Apr 13, 2010 4:59 AM

Creation of new internal delivery channel using AQ

Hi,
I wanted to route one of Trading partner data to a different queue.(no want to use existing queues - IP_IN /IP_OUT queue).
This needs to create a new delivery channel using AQ in B2B.
I have gone thru the steps & entered all entries, but I am not able to find any queues created in B2B schema.
Do I need to create a queue using PL/SL in B2B to make it available as internal delivery channel or this setup itself will create a queue in B2B?
PFA the entirs:
for transport parameters
- transport server (B2B server IP)
- Protocol as AQ
-URI - b2b.<uri_name> (name of Queue, wanted to create)
- Hostname
- Port
-SID - b2b
-consumer - b2buser
- receiptient - null
-Polling interval - 6000
Transport server details:
Host name - (IP)
IP - Host IP
username -
Pswd - for B2B schema
Any pointers will be a great help.
Regards,
MS

As mentioned by TH in the above post, first thing is to create the data type that is used for messages - IP_MESSAGE_TYPE. This data type will already be present in the B2B database and could be reused.
For a new data type you could do the following.
==============================================================
Create a new data type using the following
==============================================================
create type IP_MSG_TYPE as OBJECT (
     MSG_ID VARCHAR2(128),
     INREPLYTO_MSG_ID VARCHAR2(128),
     FROM_PARTY VARCHAR2(512),
     TO_PARTY VARCHAR2(512),
     ACTION_NAME VARCHAR2(512),
     DOCTYPE_NAME VARCHAR2(512),
     DOCTYPE_REVISION VARCHAR2(512),
     MSG_TYPE INT,
     PAYLOAD CLOB,
     ATTACHMENT BLOB
Once you have created a new Data type ( or are reusing the existing data type), you need to create Queue Table that will hold the Outbound and Inbound message queues. The existing Queue table is "IP_QTAB" which can again be reused.
For new Queue table you could do the following
==============================================================
Create a new Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue_table (     queue_table => 'MY_QTAB',
                         queue_payload_type => 'IP_MSG_TYPE',
                         multiple_consumers => FALSE);
If you need to reuse the datatype change the queue_payload_type to 'IP_MESSAGE_TYPE'.
Once we have the Queue Table that will hold the queues, we need to add and start the queues that are to be used for the inbound and outbound messages.
==============================================================
Create the new Queues into the Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_OUT_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_IN_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_OUT_QUEUE', dequeue => TRUE, enqueue => TRUE);
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_IN_QUEUE', dequeue => TRUE, enqueue => TRUE);
If you are reusing the queue table IP_QTAB for creation of new queues, then reference that for the queue_table in above commands.
You need to reference the queue_name eg. B2B.My_OUT_QUEUE in the B2B UI screen.
Hope this helps.
AKT

Filename Format in FTP Delivery Channel - oracle.tip.adapter.b2b.allTPInOne

Hi,
For Inbound SFTP transfer is there a way to avoid using standard B2B file-naming convention at source files?
We tried the following for B2B host external delivery channel (SFTP) which would pick up the files from trading partner directory -
1. Set oracle.tip.adapter.b2b.allTPInOneDirectory = false
2. Create a directory specific to the trading partner and have the Trading Partner drop the files in the Trading Partner specific folder.
However, it did not work; the transfer was successful only when standard file name format was specified and used for files.
We are using 'Oracle B2B 10.1.2 MLR16' version - is this feature not available in this version?
Sincerely,
CD

Thanks Anuj
It throws the following error now -
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
     at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3354)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1725)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2657)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2527)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2482)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:530)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:376)
     at java.lang.Thread.run(Thread.java:534)
These are the details for the Inbound transfer -
preserve filename=true
filename=SampleFile.txt
filename format (specified in host external delivery channel) =%FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%
fullpath=/../SystemB/SampleFile.txt SystemB is the remote trading partner (FROM_PARTY); it has generic identifier created with same name.
The transfer works if the filename is in this format: %FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%. Do any of the other parameters for delivery channel such as directory name format, Directory name format separator need to be used/updated?
Thanks,
CD

Error!! Could not deliver the output for Delivery channel:null

Hi Friends,
XML/BI publisher : 5.6.3
Oracle Applications : R12.0.6
Bursting program Log file
==================
XML/BI Publisher Version : 5.6.3
Request ID: 993023
All Parameters: Dummy for Data Security=N:ReportRequestID=993022:DebugFlag=Y
Report Req ID: 993022
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:XXXXXGRP02
Preparing parameters
null output =/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993023.out
inputfilename =/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993022.out
Data XML File:/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993022.out
Set Bursting parameters..
Temp. Directory:/tmp
[041210_040045855][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[041210_040045859][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=993022, user-variable:cp:language=en, user-variable:cp:responsibility=50537, user-variable.OA_MEDIA=https://appscgrpdev.oracleoutsourcing.com:443/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=993022, user-variable:cp:locale=en-US, user-variable:cp:user=Dev2, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=993023, user-variable:cp:org_id=90, user-variable:cp:reportdescription=Test_xml_bursting, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Bursting program Out put file
==================
Error!! Could not deliver the output for Delivery channel:null . Please check the Log for error details.

Hello Sir,
I am hard coding the Email id in the control file. From/To/CC emails I have hard coded. I want to paste the Control file... But I could not because, not allowing me to post XML content.
Thanks
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
     <xapi:request select="/EMPLOYEE_REPORT/EMPLOYEE">
          <xapi:delivery>
               <xapi:Email server="mycompanyserver" port="25" From="[email protected]" reply-to ="[email protected]">
                    <xapi:message id="123" to="[email protected]" cc="[email protected]"
                         attachment="true" subject="Employee Details for ${FULL_NAME}"> Mr./Ms. ${FULL_NAME}, Please review the attached document
                    </xapi:message>
               </xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
     <xapi:template type="rtf" location="xdo://XBOL.TEST_ABC_XML.en.US/?getSource=true">
     </xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9367932 on Apr 13, 2010 4:59 AM
Edited by: user9367932 on Apr 13, 2010 4:59 AM

BIP Bursting and Invalid Delivery Channels

Hi,
I have a BIP report which is setup to demo bursting capability. It works fine with multiple channels such as File folder, FTP, Email (Oracle Email Server).
However, if I have invalid email addresses in the list of my bursting destinations, the report job log will still show all bursting deliveries "SUCCESS" though those bursted parts will neve be actually delivered to invalid email addresses.
So I end up having an embrassing situation that some bursting end-users can't get report in their email box (because someone made mistakes when putting end user's email addresses in bursting configuration file/table) and administrator can't be aware of those failures because those won't be shown as "failed" on job log.
Is there any way to configue BIP so that un-delivered part of bursting can be shown to the Administrator?
BTW, before I send this email out, I just found FTP delivery channel also has the same issue. i.e. The bursting log still shows "SUCCESS" even when an invalid FTP host address is configured.
Thanks a lot.
Sincerely,
Yang

Hi all,
within the delivery note specification the FTP Server name has been set the same to the IP address.
For example:
OLD
FTP server name: Test
IP: 1.1.1.1
Port:21
NEW
FTP server name: 1.1.1.1
IP: 1.1.1.1
Port:21
Then issue was resolved.
Please, refer to the SR# 3-1488517361.
with regards,
Eldar A.

HTTP proxy for AS2 delivery channel

Hi All,
During AS2 delivery channel configuration, there is a check box "Use proxy". Where do I specify the proxy details? Also, for additional http headers, what is the standard that needs to be followed?
Regards,
Praveen

Hi Praveen,
Ideally Proxy setting is done while installation.
if you missed while installation and want to use B2B proxy then you can try giving below property while starting the managed server:
-http.proxyHost=<ProxyServer> -Dhttp.proxyPort=<proxyPort>
Rgds,
Nitesh Jain

Custom Delivery channel

Similar Messages

Maybe you are looking for