Custom equalizer carry over?

I set a custom equalizer setting in iTunes for various songs and transferred them over to my iPod. I know I cannot select my custom EQ setting on my ipod, but will ipod recognize (at least on those songs I set for in iTunes) that eq setting or will it fall back to whatever the eq setting is for the rest of my ipod?

Use either one of these links.
iPod Feedback.
iTunes Feedback.

Similar Messages

C/O dosent carry over along with billto to part func. using custom Creat SO

Hi Gurus!
We have a custom program to create sales order ZVA01 which creates sales oder. When using that program , we eneter the sold to , the bill to party carries over to the partner function and everything else carries forward except the C/O(Care off) dose not carry forward. I have checked with the MDM group and its all set up correctly . When using the trabnsaction VA01 to create sales order it does carry over everything to the partner function even the C/O. We need to use this cutom program for a specific purpose so using VA01 is not teh solution to our problem. I would like to know why everything except the c/o part is not getting carried over. Could anyone please tell me what maybe the reason for c/o not to carry over in my custom transaction to create sales order.
Thanks

You have my deepest sympathy. I can't imagine anyone trying to replicate SAPMV45A modules into a custom program, although I once removed about 20-30K lines of "cloned" SD code, replacing it with standard SAP with exits, transaction variants and variant transactions. Or, perhaps you've just written a front-end that executes VA01?
Obviously, you've missed something in SAPMV45A partner functions. I think you'll have to find that and replicate to get the missing partner(s). What you've encountered is a spectacularly good example of why not to attempt to "re-write" standard SAP functionality, IMHO.

How to get custom iCal colors to carry over to iPad or iPhone calendars

How do I get custom calendar colors designated on my iMac to carry over to my iPad or iPhone? It used to do so, and now it no longer does.

Thanks Joe. We have discovered from this forum, actually, that if you send the photos from the iPhone, if that's where they were taken, then you are asked what size.
"If you send from the camera, then you get the option of reducing the size. If you send from your other photos synced from your computer, they don't have that option of reducing."
I tested it by sending a couple of photos taken by my iPhone, and sure enough, was asked as to size. Then sent the same two photos from my iPad (Photostream) and was not asked. Interestingly though, the sizes were identical in both emails.

Negative carry over sholud not be allowed in fast formula

Hi,
I have coded like this so that it will not allow negative carry over (note: no expiry for carry over )
but this will not work since line 8 will bring just carry over from the previous year.
To get absence i can use get_absence function.so if i get no of absence ,total carry over and total accrual pto i can calculte net entilement.
but to get Total accrual PTO in carry over formula , I am not able to use the procedure
PER_ACCRUAL_CALC_FUNCTIONS.Calculate_Accrual.If I use i get error as
ORA-20001: The formula XXCHR_CR_VACATON_ACCRUAL_FORMULA could not be executed because the context ASSIGNMENT_ACTION_ID was not set. All the relevant context values must be set before a formula can be executed.
Action: If this is custom code then please ensure that it sets all the appropriate context values. If this is not custom code then please contact your local support representative.
ORA-06512: at "APPS.PER_FORMULA_FUNCTIONS", line 608
ORA-06512: at "APPS.PER_ACCRUAL_CALC_FUNCTIONS", line 70
ORA-06512
so how do I not allow negative carry over.
1 Years_service = floor(months_between(Effective_date, Continuous_Service_Date) / 12)
2 IF (GET_ACCRUAL_BAND(years_service) = 0) THEN
3 L_Max_carryover = GET_NUMBER('MAX_CARRY_OVER')
4 ELSE
5 L_Max_carryover = 0
6 Max_Carryover = L_Max_carryover
7 l_exp_Effective_Date = ADD_YEARS(Effective_Date,-3)
8 L_tot_carryover = GET_CARRY_OVER(Effective_Date,to_date('0101'||to_char(Effective_Date,'YYYY'), 'DDMMYYYY'))
9 IF L_tot_carryover <0 THEN
10 (Max_Carryover = 0)
11 Process = 'YES'
12 RETURN Max_Carryover, Effective_date, Expiry_Date, Process
tnx in advance

there are seeded Accrual formulas given out of the box, which you can edit for your purpose

Custom Equalizer???

hey, so does the new 3.0 OS for the ipod touch now have a custom equalizer? I have been hoping ever since i got my ipod touch that they would introduce one, since the creative MP3 player that i got about 5 years ago has one and i can make my music full of bass on that without it distorting.
Also, to anyone who was having album art problems (not displaying correctly on the ipod when playing the track, half of it black or sometimes completely blank, and also sometimes would display when rotating the ipod for album cover view), do those problems seem to be gone now? I have been having this issue even with tunes that i purchased off Itunes.
Thanks in advance for any help
Message was edited by: Atroublestarter

Please don't be rediculous neil, my creative mp3 player has a adequate equaliser, and it's over 5 years old, AND the battery lasts 24 continuous playtime.
Furthermore, the ipod already has an equaliser, but there are only presets. I'm talking about an interface to control the settings myself, instead of being restricted to presets. And being some sort of expert as you claim to be (even though you're clearly not because of your ignorance about battery life), you should know that the custom equaliser would be OPTIONAL, and a lot of people would be willing to sacrifice any battery life that would be lost from a result of using the equaliser.
There would be no complete re-design of the sound component of the ipod, as you should know yourself the equaliser is already there. Obviously this is not important to you, however i have expensive headphones which boasts excellent quality, and the ability to handle very low responce frequences. This worked perfectly with my old mp3 player by creative, as i could raise the bass levels without allowing any distortion. However the ipod preset that amplifies bass (bass booster) excessively raises the lower tones to the point of where it will distort. this is coming from the actual ipod though, not the headphones. I can test this in many ways, such as using the headphones with my old mp3 player which produces fantastic bass quality, and by connecting the ipod up to my car stereo and home hifi.
i am puzzled as to why you are giving us a lesson on how high a pitch an old man can hear, when i'm talking about how restricted the current equaliser on the ipod touch is. and the fact that you claim it would eat up battery power (it would, but only a small amount), does signify to me that you know very little on the subject, and very little care for quality.
perhaps i should lend you my creative mp3 player and my headphones, and i will show you the difference.

PTO carry over FF not reprocessing all employees

Hi
I have created a simple custom accrual plan with simple custom accrual formula and custom carryover formula.
I am trying to modify the a custom carryover formula and run the PTO carry over process with the "REPROCESS ALL" parameter set to 'YES' but the carryover formula is not REPROCESSING all the employees.
Am I missing something?

Hi,
Could you please correct me whether you have been attached multiple leave elements to this accrual plan ?
Otherwise system only carry over particular leave attached to accrual plan.
Thanks
AshokP

Why isn't unused Data Carried over month-to-month....I've paid for it?

Just a general question directed toward Verizon.
Why isn't my unused data carried over from month to month?
To begin with, if I purchase "X" Gig. of data, and decide that I might need more, at the $10.00/Gig rate, rather
than take a chance of doing an overage, which priced at $15.00 per Gig, but do not use all of the data that I have
purchased, why can it not be carried forward on my account, to be used the next month. I have paid for it!

I can tell people to take what is the best deal for them. If they feel that their interests are better served elsewhere, why would they stay if their needs cannot be met at present? It's not to say the change is forever as customers can come and go as they wish. Sometimes customers leave because they are mad about changes, or they don't understand some aspect of their service, other times it really is a lack of service, be it customer service or network service. A lot of the times customers come back. A Verizon rep might say that this is simply not a feature of any plan that is offered right now and that they do not have information on such a feature as it pertains to future feature inclusion. A lot of us here are objective in that we try to see where the customer might be misunderstood and where Verizon's terms and plans might be better explained. Sometimes it's not the big corporation's fault for what customers mis-perceive as it relates to opinion or fact, and sometimes it is the company's shortcomings that might have lead to a bad customer experience. Usually though, it is a lack of understanding, be it equipment or service, rate changes or plan details. We are here to inform and help. Customers decide what to do with that input.

Can shortcuts from Adobe Premiere Pro CC (last version) carry over to PP CC 2014?

I installed Premiere Pro CC 2014 on two computers, and both times the custom shortcuts that I created did not carry over.
Is there any way to make this happen? Thanks.

give the KBSC a unique name and copy them from My Documents / Adobe / Premiere Pro / 7.0 / Profile creative cloud / win
to
My Documents / Adobe / Premiere Pro / 8.0 / Profile - name / win.

Master Agreements fields carry over to child Agreement.

Hi,
How can I carry over the fields set in the master agreement module to a child agreement?
I believe I need to have a script definition on the creation of child agreement. but how can I get the reference to the master agreement fields? Any sample code?
Also if not for script definition is there any other way out?
Edited by: patsy lobo on Sep 22, 2008 7:35 PM
Edited by: patsy lobo on Sep 22, 2008 7:36 PM

HI,
Adding to what Sudipta has said, you can also use the workbook technique for accomplishing these type of changes. That way you can achieve all hover text changes in one shot across all MA tabs.
The 2 main tabs in the wokbook to be changed are: 'Localized Resource' and 'UI overrides' tab.
As an example, suppose you want to add the following text for Master Agreement External Category field:
"This field is a classification hierarchy to describe the products or services of the event and/or agreement."
So in the Localized resource tab, fill out the following:
BUNDLE: custom
RESOURCE_ID: xxx
RESOURCE_KIND: APP_TEXT
DEFAULT_VALUE: This field is a classification hierarchy to describe the products or services of the event and/or agreement.
Then refer the same attributes in the UI Overrides tab:
UI_ID: contracts.agreement.ui.buyside.default
FIELD: EXT_CAT
ATTRIBUTE: Description
VALUE: Same as Resource ID used in localized resource (xxx above)
Hope this helps,
Vikram Shukla

Header and footer of RTF template not getting carried over to Excel output

We have Header and Footer in RTF template defined. The output of the report will be in Excel. When we run the report, the header and footer on the report are not getting carried over to excel has header and footer, instead the header and footer are printed as first line on the excel. Also, the RTF template is set to landscape but when the output is generated in excel, it is set to Portrait

hi..
chk this presentation...
http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt#352,3,Why NW 2004s?
http://www.sap-hefte.de/download/dateien/1090/086_leseprobe.pdf'
hope this helps...

Data display - aligning group data and carry over on new page logic - 11G

I am fairly new to BI Publisher, so any help would be much appreciated. I am working with a standard pdf form to display Purchase Order Data. I have saved the image of the pdf as the background of the page. I have a simple table where I am inserting all the data and aligning it on the page so it appears to be in the correct place on the form.
The form has a section containing 10 blank lines to display the PO data. Each line is .25 inches.
The problem occurs that at the line description can have 254 characters but the space on the line allows for 51 characters. So I need to display the data something like this (for simplicity sake)
TableA.id TableA.Description254
Line 1 1 Blah, 1-51 characters of line descr
Line 2 Blah blah, 52 - 102 characters
Line 3 2 Blah, 1-51 characters of line descr
Line 4 3 Blah, 1-51 characters of line descr
Line 5 Blah blah, 52 - 102 characters
Line 6 Blah blah, 103 - 153 characters
anything that carries over needs to go to a second page with a different background image. So I have several questions.
1. Any suggestions on how to display the PO Line, so I can substring the PO line description and display the remaining data on a following line? A second line would write the next 51 characters of data if it exists, and would not display the first column, (TableA.Id)
2. Any suggestions on how to load the carry over data (anything over the 10 lines on the first page) and display on the following page.
I am including a screen shot so this might make more sense. I have lightly dashed orange lines showing of my table which I use for aligning the data. It is only for reference.
[ http://www.fifthq.com/bi.jpg|Pdf image]
http://www.fifthq.com/bi.jpg

Ok, just in case anyone runs into the same issue. Here was my solution.
I added a made up record to the existing xsd template that served as a place holder for my dynamic content.
I created an app package that has two properties.
1. Full String
2. Single Line String
The Method takes in the column width as a parameter. It searches through the Full String until it finds the last available word before the column width. It then returns that as the Single Line String and updates the Full String to what's remaining.
If I have any of the Full String remaining I keep calling the method.
I can provide more specific details about the method if anyone needs it.

Function module called within a loop seems to carry over global data

Hello all,
I am calling FM "RS_COVERPAGE_SELECTIONS" inside of a loop of all variants for a program and then writing the variant values to spool. If only one variant is entered on the selection screen, all the values are correct. If nothing is entered, some of the variant values are carried over from a previous variant. I am emptying the internal table returned by the FM every time before the FM executes.
Would some one be willing to run the following code for a program with many screen fields and many variants and tell me if they get the same behavior?
Thanks
Bruce
REPORT zzzz.
tables: varid, varit.
parameters:     p_pgm type progname obligatory default 'ZFAPI004'.
select-options: s_var for varid-variant.
parameters: p_varval as checkbox default 'X'.
data: begin of reptab occurs 0,
        report like varid-report,
        variant like varid-variant,
        ename like varid-ename,
        edat like varid-edat,
        etime like varid-etime,
        aename like varid-aename,
        aedat like varid-aedat,
        aetime like varid-aetime,
        vtext like varit-vtext,
      end of reptab.
data: begin of tab_sel_options occurs 0,
                        flag(1) type c,
                        olength type x,
                        line like rsvar-infoline,
                      end of tab_sel_options.
*>> At Selection-Screen data items <<
data: w_pgm like sy-repid.
data: itab like rseui_f4 occurs 0 with header line.
data: dyname like d020s-prog value sy-repid,
        dynumb like d020s-dnum value '1000'.
data: begin of dynpfields occurs 3.
        include structure dynpread.
data: end of dynpfields.
data: w_tabix    like sy-tabix.
data: begin of i_var occurs 0,
          variant like varit-variant,
          vtext   like varit-vtext.
data: end of i_var.
start-of-selection.
format intensified on.
write: / p_pgm.
select * from varid
    where report = p_pgm
      and variant in s_var.
    select single * from varit
      where langu = 'E' and report = p_pgm
        and variant = varid-variant.
    move-corresponding varid to reptab.
    move-corresponding varit to reptab.
    append reptab.
endselect.
sort reptab by variant.
skip 1.
format color col_heading.
write: /03 'Variant',
          18 'Create',
          47 'Modify',
          76 'Description'.
format color off.
skip 2.
loop at reptab.
    format color col_total.
    write: /3 reptab-variant,
             reptab-ename(8),
             reptab-edat,
             reptab-etime,
             reptab-aename(8),
             reptab-aedat,
             reptab-aetime,
             reptab-vtext.
    format color off.
    skip 1.
    if p_varval = 'X'.
      clear   tab_sel_options.     " header
      refresh tab_sel_options.     " lines
      call function 'RS_COVERPAGE_SELECTIONS'
        exporting
          report            = reptab-report
          variant           = reptab-variant
          no_import         = ' '
        tables
          infotab           = tab_sel_options
        exceptions
          error_message     = 1
          variant_not_found = 2
          others            = 3.
      loop at tab_sel_options.
        if sy-tabix < 7.
          continue.
        endif.
        write: / tab_sel_options-line.
      endloop.
      skip 1.
    endif. " p_varval = 'X'.
endloop.

Hi
Try using the function module PRINT_SELECTIONS, within this FM, the FM RS_COVERPAGE_SELECTIONS is being called. So it will not copy the previous values.
Pass Mode as 'A' , report name and variant name, then it will display the same output.
Please try it
Shiva

Survey Question - Carry over data

Hi,
Is there a way to carry over responses/answers from a survey question from one slide to another? I have a scenario where users analyze a situation and note the problems (survey answers - ungraded) on one slide. I don't want them to see the answers to the scenario until the next slide but want them to remember what they've put in as the problems with the scenario. I've searched the forum but didn't see this situation. Thanks very much for any ideas.

For short answer questions the value of the system variable cpQuizInfoAnswerChoice is the exact text that was entered, which is great news for you I suppose? Be sure to assign the value of that variable to a user variable before the next question is answered. That means that best event to trigger the action is the On Enter event for the next slide. As you perhaps know, there is no On Exit event possible for Question slides.
http://blog.lilybiri.com/events-and-advanced-actions
You will have to create an advanced action for that: Assign v_answer1 with cpQuizInfoAnswerChoice
And you'll need a different action for each question, even shared actions couldn't help you because a variable (it is the user variable v_answerx that will be different for each action) cannot be a parameter.
Lilybiri

PTO Carry Over Process errors out

Hi ,
I am trying to run the PTO Carryover process and I am giving the parameters for calculation date - 01-jan-2010 and accrual term as 'Previous'.
I have a biweekly payroll and payroll period is '28-dec-2009' to '10-jan-2010'. We are using the seeded 'PTO_PAYROLL_CARRYOVER"
formula in accrual screen. when I run the PTO Carryover process I am getting the below error.
ORA-20001: An error has occurred in a user defined function at line 130 of the formula PTO_PAYROLL_CARRYOVER.
The error text associated with the function call is:
The system cannot calculate accruals for this date becuase the employee's payroll did not exist for the full accrual term..
Please correct the problem with the function call, or contact your system administrator or support representative.
I assume that i am getting this error because 31-dec-2009 falls in between payroll period 28-dec-2009 and 10-jan-2010. the seeded formula is calculating
as of 31-dec-2009 which is in between payroll period. Can you please help me. we need to do the carry over process.

Hi,
What is the application release?
Please see if these documents help.
Note: 402404.1 - PTO Carryover Process Error: ORA-20001 Line 39 Of The Formula PTO_PAYROLL_CARRYOVER
Note: 473272.1 - PTO Carryover Errors ORA-20001: An Error Has Occurred In A User Defined Function At Line 65 Of The Formula PTO_PAYROLL_CARRYOVER
Regards,
Hussein

Accrual Balance not getting carried over

For one of my client's employees, the mid-year accrual balance is not getting carried over.
08-JUL-2008 is the hire date of the employee. The client has end-dated the accrual plan element entry for this employee on 23-NOV-2009 and created a new one (for the same accrual plan) from 24-NOV-2009. The balance is getting carried over from 2008 to 23-NOV-2009, but NOT from 24-NOV-2009 to 31-DEC-2009.
08-JUL-2008 TO 31-DEC-2008 - Accrual Balance is 19.828 days.
01-JAN-2009 TO 23-NOV-2009 - Accrual Balance carried over from 2008 is 19.828 days.
24-NOV-2009 TO 31-DEC-2009 - Zero Accrual Balance is getting carried over.
Also, the client has run the PTO Carry Over process thru’ out for all the years. But no help there.
I just noticed that the accrual plan 'Annual Leave Plan 41 Days' and the respective balances, elements, links etc., were created in the system on 19-DEC-2009. Could this be the reason why the net entitlement balance is not getting carried over to 2009?
Would appreciate any pointers in this regard.
Thanks
Regards
Trupti

Hi,
Are you running the carryover process for both the plans. Can you share the accrual carry over for the new plan. As you have said the elements and links are created as on 19-DEC-2009, the balance should be carried over for the days between 19-DEC-2009 to 31-DEC-2009 if you are doing the partial accrual.
Thanks

Custom equalizer carry over?

Similar Messages

Maybe you are looking for