Custom Events and Scheduling more than once

Hi,
in BO 4.1, I successfully triggered WebI Report instance generation by a "Custom Event" through scheduling.
Now, we have the requirement that the report should not be triggered only once but always when the event is triggered.
At first glance, this looks tricky bc. in order that the report "reacts" to the event, the report itself must be scheduled with the event (it gets an instance "pending" that "wait + reacts" to the event). So it looks like we need schedule the report always manually with "event" before it is ready to react to the event specified in the scheduling.
Is there any user-friendly trick to make the report react upon every fired event without having to "schedule" the report manually with the event?
(Similar to schedule daily, just that the event is the trigger, note a daytime...)
Best Regards

Hi Florian,
What is the frequency set under Recurrence option for the report instance?
Can you give an idea like after how much time the event can be triggered?
For example, if you are expecting the event to change in an hour, you can schedule the recurrence as hourly or you can specify something like 0 hours and 15 minutes or something like that.
In that case, once the event is fired, your report instance will be ready to trigger after 15 minutes for the next run.
Would suggest you to sync with the BO administrator as concurrent triggering of large number of instances can give load on Job Servers.
Hope it will help in some way.
Regards,
Yuvraj

Similar Messages

HT1918 I'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the probl

i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?

Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change

Terminating Event Getting triggered more than once

Hi All,
I am facing a very peculiar problem in PR release workflow(item wise release, business object BUS2009).
One of the requirements of the workflow is to send a mail to PR initiator once it is rejected by any of the approvers(4, in my case). The event associated with the cancellation of the workflow is REJECTION_START.
The problem is that this event is being triggered more than once. One thing that i have observed is that if eg. second level of approver cancels it, the event is triggered twice. Likewise if third level of approver cancels it, it is being triggered thrice. Which leads to sending of 2 and 3 mails respectively to the PR initiators mailbox.
Why is this happening? Ideally, only one event should have been triggered, and the triggering of the event should have been independent of PR approver's level. I am at my wits end regarding this.
Any suggestions in this regard will be highly appreciated
Regards
Varsha Agarwal.

If you check for 2nd level rejjection two release Code is associated so it triggers 2 times and same for 3rd level approval.
I think you have to put some sort of filter using FM SAP_WAPI_WORKITEM_OBJECT
in the attribute portion of yopur custom BO.
The attribjute will check this FM and if it has entries that means already a Workflow has been triggered it should set the flag as X.
Make use of this attribute in defining the start condition of this task thru
SWB_COND.
Thanks
Arghadip

My macbook pro is running slow and freezing more than once a minute.

I do not know much about computers, but I do know this is not normal for my computer.
Processor 2.9 GHz Intel Core i7
Memory 8 GB 1600 MHz
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.5
So about two days ago I was using the computer and noticed that it was freezing and giving me the little spinning circle of evilness. This happens every time I open anything, try to type(which is making this an extremely long process), load a screen in the MMORPG I play(Or even just general play time). I can be doing anything, and the computer will freeze for anywhere between 5 seconds, and up to 10 minutes. Things normally continue on fine, or sometimes my internet screens fail to load. I have ran ccleaner and cleaned up a few things, and then ran AVG which found quite a few files or something called Genio which I deleted. I have also upgraded all the latest updates that I can, but now when I try to open the app store to double check to see if there are any more updates, and it will not open, it freezes. I have reset my comps system management controller, and I have reset my PRAM. My desktop is not cluttered, and I'm more confused than ever.
If there is any more information I can give, I will try. Please help??

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

HT4722 Can Final Cut Pro be purchased and downloaded more than once?

Can final cut pro be purchased and downloaded on more than one computer?

This is an excerpt from the FCPX license, available here.
http://images.apple.com/legal/sla/docs/FinalCutPro.pdf
2. Permitted License Uses and Restrictions.
A. Mac App Store License. Subject to the terms and conditions of this License and as permitted by the Mac App Store Product Usage Rules set forth in the App Store Terms and Conditions (http:// www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non- exclusive license:
to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
(ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library.

My 4s has no sound on most outgoing calls. i constantly have to turn my phone off and on more than once a day to get it to work. how can i get this fixed?

My 4s has no sound on most of the outgoing calls i make. It will ring the other phone I am calling but I cannot hear it nor can they hear me when they answer. Its just dead air but my phone timer is in use. How can this be corrected?

It's very possible that you have stuff running in the background that you don't even realize you have running. For example the default is for all notifications to be on and you usually need few to none of them.
That said, while an iPad can run warm, too hot to handle isn't right. ALso you should get about 10 hours....depending on what you're doing of course. If you're doing processor intensive stuff, like gaming and videos it can drain faster and generate more heat.
I would say if you have an apple store near by, make an appointment and have them check it out. If the issue is due to what they determine to be manufacturer's defects then it could fall under the warranty. But that's up to the store to determine.

Events being triggered more than once

HI All,
I am using SAP Business One 2007 A SP:01 PL:07
I have created a form using SAP Business One UI API Version 2007 A 8.0.When i open the form first time all item events and menu events are working properly..
When i close the form and open it again all the menu and items events get fired twice.Again i close and reopen the form all Item and Menu events are triggered thrice on a single click.
Any help to solve this problem will be highly appreciated.
Warm Regards,
Prerna

Hello,
Maybe You using a global variable for the form. Try to swicth to local variable and use sbo_application.form.GetForm(pval.formtypeex, pval.formtypeCount), or check you application really closes the window (window menü, and see the list of opened forms).
Try to use EventSpy, which is a part of the SDN tools, you can download from /docs/DOC-8857#section6
Regards,
J

Custom validation Messages printed more than once :-(

Hi,
I have added a Custom Validator to a drop down list box (h:selectOneMenu) and for a text field. and i bound these form elements to the corresponding UIComponent Object in the becking bean. The backing bean is in session scope I have a link which will forward to a different page and i disabled the validation on this link by setting immediate as true.
But when the user clicks the command link goes second page and then comes back to the first page and click the submit button, the validation error occurs. But to my surprise i am getting the same Validation error message printed twice or thrice (as when we are going to the second page and then comes back and submits).
If I am correct the Validator corresponding to the component keeps the old error state and then add the new error state.
I tried to remove one FacesMessage object which i got from Iterator of FacesContext.getMessages() and then tried. but hence also i was getting the same result.
When i looked at the log, i foud my validator class being invoked twoce (or thrice depending upon the no. of times i went to the secoond page).
Can you please help me out from this problem?
Thanking you,
Sudheesh

If it is indeed 1.1, I'd recommend trying 1.1_02 [1] and trying again.
[1] https://javaserverfaces.dev.java.net/servlets/ProjectDocumentList?folderID=5225&expandFolder=5225&folderID=5220

Can't copy and paste more than once.

I open one image, make a selection, then copy that selection.
Now I open a second image and paste the selection into that second image.
When I try to paste into additional images, the Paste function is grayed out and I have to go back and copy again. I did not have to do this before.
Any suggestions?
Thanks,
Tony

Tony,
Please tell us your OS, Mac CPU, and version of Photoshop you're using. Also, image type. Did anything change on your Mac? Did you do any upgrades or other system changes?
Thanks.
Neil

Custom Administrative Template Error 53 Key name specified more than once

Hi All,
Hope I've picked the correct forum. I am making my first foray into setting up a custom administrative template for some software that is developed in house. The current deployment method is to merge a reg file on each computer that requires the registry
settings. I am trying to set this up so that it is controlled via GPO.
My idea is that in the a GP can set the registry settings for one or more areas that are controlled by the software.
The problem I have - I get Error 53 Keyname specified more than once on Line 9 (second KEYNAME). In total I will have about 30 different sites this needs to be set up for.
Does this mean that I can't set more than one registry key per "Policy" setting in the GPO?
The adm file I have so far is below
TIA
Jason
---------------------------------------------CUT---------------------------------------------
CLASS User
CATEGORY "App Site Settings"
POLICY !!Site1Policy
EXPLAIN !!Site1Explain
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME "SystemDatabase"
VALUEON "D:\\App\\Data\\App.mdw"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME "ConfigPath"
VALUEON "D:\\Site1\\Data"
VALUEOFF DELETE
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME "ConfigFile"
VALUEON "D:\\App\\Data\\App_Comms.mdb"
VALUEOFF DELETE
VALUENAME "SysConfig"
VALUEON "D:\\Site1\\Data\\SITE1_SYS.mdb"
VALUEOFF DELETE
END POLICY
POLICY !!Site2Policy
EXPLAIN !!Site2Explain
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME "SystemDatabase"
VALUE "D:\\App\\Data\\App.mdw"
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME "ConfigPath"
VALUE "D:\\Site2\\Data"
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME "ConfigFile"
VALUE "D:\\App\\Data\\App_Comms.mdb"
VALUENAME "SysConfig"
VALUE "D:\\Site2\\Data\\Site2_SYS.mdb"
END POLICY
END CATEGORY
[strings]
Site1Policy = "Site1 settings"
Site1Explain = "Enabling this setting configures the registry settings for dummy Site1."
Site2Policy = "Site2 settings"
Site2Explain = "Enabling this setting configures the registry settings for dummy Site2."

Well - I ended up sorting this out - and no - you can't have the Keyname keyword twice - unless you enclose the the setting in a PART statement. Below is what I ended up with:
---------------------------------------------CUT---------------------------------------------
CLASS USER
CATEGORY "ApplicationSettings"
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
POLICY !!SITE1Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site1\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site1\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
POLICY !!SITE2Policy
#if version >= 3
EXPLAIN !!PolicyExplain
#endif
KEYNAME "Software\ApplicationCompany\Site2\Access"
PART !!ConfigFilePolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Settings"
VALUENAME ConfigFile
DEFAULT !!ConfigFileDefault
END PART ;!!ConfigFilePolicy
PART !!SystemDBPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Access"
VALUENAME SystemDatabase
DEFAULT !!SystemDBDefault
END PART ;!!SystemDBPolicy
PART !!SysConfigPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Common Setting"
VALUENAME SysConfig
DEFAULT !!SysConfigDefault
END PART ;!!SysConfigPolicy
PART !!ArbitrationPolicy EDITTEXT
KEYNAME "Software\ApplicationCompany\Site2\Arbitration"
VALUENAME ConfigPath
DEFAULT !!ArbitrationDefault
END PART ;!!ArbitrationPolicy
END POLICY
END CATEGORY
[Strings]
ArbitrationDefault =D:\SITE\Data
ArbitrationPolicy =Arbitration path
ConfigFileDefault =D:\App\Data\App_Comms.mdb
ConfigFilePolicy =Application configuration file
PolicyExplain =Enter Explainition of the Registry settings here
SysConfigDefault =D:\SITE\Data\SITE1_SYS.mdb
SysConfigPolicy =Application site system configuration file
SystemDBDefault =D:\App\Data\App.mdw
SystemDBPolicy =Application system database path
SITE1Policy =Site1 Application Settings
SITE2Policy =Site2 Application Settings

Report to select customer ID occuring more than once

My report requirement is to capture transaction detail when a customer ID occurs more than once. Is there a way to do a sum count on the customer id in order to display the transaction detail. My current solution is to run a report where the customer count is greater than one, and then do a subquery against that data to display the transaction detail. I would like to be able to eliminate the subquery.

Hi,
You can create an analytic function to count the customer_ID per every transaction:
count(customer_id) over (partition by ..<enter the fields of the report>.....)
This will give for every transaction the number of transaction per same customer_id
Now that you have it you can create a condition on it so
that you will get only transaction with count customer_id > 1

WDDOMODIFYVIEW and WDDOPOSTPROCESSING is called more than once!

Hello everybody,
maybe someone can help me. Our WDA application consist of 5 Components. One main and 4 components embedded in it. We instantiate the components in the WDDOINIT of the main component and use them between themselves.
I suppose that's the reason that the events in the views and componentcontrollers of each component is called so often.
With a break point in a WDDOMODIFYVIEW an the debugger I find out that the HANDLE_REQUEST methos from the CL_WDR_CLIENT_ABSTRACT_HTTP class is startet also more than once.
1. if m_ucf is not bound -> yes and m_request_type = suspend
2. if m_ucf is not bound -> initial and m_request_type = suspend
3. if m_ucf is not bound -> initial and m_request_type = suspend
4. if m_ucf is not bound -> initial and m_request_type = refresh
Maybe someone has expierence with it an can give a hint or explanations for this.
I hope so
Thanks for any answer
Best regards
Christian Breitenbach

hi christian.......
a wddomodifyview view method will be called even if there is a little change in your view. it will b e called more times than your normal pbo in a dynpro application. the wddoinit will be called only before the view is loaded... but the modify willbe called even for popups nad any event.
---regards,
alex b justin

Method called more than once - and dies with EXC_BAD_ACCESS error

Hi,
In my app, I have 4 views with their respective viewControllers. In the appDelegate.m, I provide methods that allows to switch to any of these views. Following is code for switching to the editView:
-(void) flipToEditView {
[self populateTheList]; // populate an array
EditViewController *anEditVC = [[EditViewController alloc] initWithNibName:@"EditView" bundle:nil];
[self setEditVC:anEditVC];
[viewController.view removeFromSuperview];
[self.window addSubview:[editVC view]];
[anEditVC release]; }
The view is not switched - and moreover, this method is called more than once; and the app dies with EXCBADACCESS!
2009-08-23 14:54:40.648 iNotate[2128:20b] Album (before): x= 0 y=20 width=320 height=460
2009-08-23 14:54:40.653 iNotate[2128:20b] Album (after): x= 0 y= 0 width=320 height=480
warning: Couldn't find minimal bounds for "_sigtramp" - backtraces may be unreliable
(gdb) bt
#0 -[iNotateAppDelegate flipToEditView] (self=0x523690, _cmd=0x9563) at /Users/sam/MY_FILES/iPhone Apps/app/Classes/iNotateAppDelegate.m:116
#1 0x00008661 in -[FirstView editAction] (self=0x546a30, _cmd=0xac94) at /Users/sam/MY_FILES/iPhone Apps/app/FirstView.m:25
#2 0x30a4eee6 in -[UIApplication sendAction:to:from:forEvent:] ()
#3 0x30ab0d36 in -[UIControl sendAction:to:forEvent:] ()
#4 0x30ab11fe in -[UIControl(Internal) _sendActionsForEvents:withEvent:] ()
#5 0x30ab0544 in -[UIControl touchesEnded:withEvent:] ()
#6 0x30a67917 in -[UIWindow sendEvent:] ()
#7 0x30a56fff in -[UIApplication sendEvent:] ()
#8 0x30a561e0 in _UIApplicationHandleEvent ()
#9 0x31565dea in SendEvent ()
#10 0x3156840c in PurpleEventTimerCallBack ()
#11 0x94a713c5 in CFRunLoopRunSpecific ()
#12 0x94a71aa8 in CFRunLoopRunInMode ()
#13 0x31566600 in GSEventRunModal ()
#14 0x315666c5 in GSEventRun ()
#15 0x30a4eca0 in -[UIApplication _run] ()
#16 0x30a5a09c in UIApplicationMain ()
#17 0x000027e8 in main (argc=1, argv=0xbffff068) at /Users/sam/MY_FILES/iPhone Apps/app/main.m:14
Current language: auto; currently objective-c
(gdb) continue
2009-08-23 14:54:55.885 iNotate[2128:20b] >>>>>>>>>>>>>>>>>> populateTheList
(gdb) bt
#0 -[iNotateAppDelegate flipToEditView] (self=0x523690, _cmd=0x9563) at /Users/sam/MY_FILES/iPhone Apps/app/Classes/iNotateAppDelegate.m:116
#1 0x00008661 in -[FirstView editAction] (self=0x5457b0, _cmd=0xac94) at /Users/sam/MY_FILES/iPhone Apps/app/FirstView.m:25
#2 0x30a4eee6 in -[UIApplication sendAction:to:from:forEvent:] ()
#3 0x30ab0d36 in -[UIControl sendAction:to:forEvent:] ()
#4 0x30ab11fe in -[UIControl(Internal) _sendActionsForEvents:withEvent:] ()
#5 0x30ab0544 in -[UIControl touchesEnded:withEvent:] ()
#6 0x30a67917 in -[UIWindow sendEvent:] ()
#7 0x30a56fff in -[UIApplication sendEvent:] ()
#8 0x30a561e0 in _UIApplicationHandleEvent ()
#9 0x31565dea in SendEvent ()
#10 0x3156840c in PurpleEventTimerCallBack ()
#11 0x94a713c5 in CFRunLoopRunSpecific ()
#12 0x94a71aa8 in CFRunLoopRunInMode ()
#13 0x31566600 in GSEventRunModal ()
#14 0x315666c5 in GSEventRun ()
#15 0x30a4eca0 in -[UIApplication _run] ()
#16 0x30a5a09c in UIApplicationMain ()
#17 0x000027e8 in main (argc=1, argv=0xbffff068) at /Users/sam/MY_FILES/iPhone Apps/app/main.m:14
(gdb) continue
2009-08-23 14:55:22.493 iNotate[2128:20b] >>>>>>>>>>>>>>>>>> populateTheList
Program received signal: “EXCBADACCESS”.
(gdb) continue
What's happening here?
Sam!

-(void) flipToEditView {
[self populateTheList]; // populate an array
EditViewController *anEditVC = [[EditViewController alloc] initWithNibName:@"EditView" bundle:nil];
[self setEditVC:anEditVC];
[viewController.view removeFromSuperview];
[self.window addSubview:[editVC view]];
[anEditVC release]; }
}<---- is this } matched elsewhere?

QuickTime DOM Events called more than once?

I am in the process of writing code in JavaScript that will track the interaction on a embedded QuickTime video.
function ew_addImage(v) {
trackImg=new Image(1,1);
trackImg.src=v;
function ew_pauseTrk() {
var imgStr='http://www.sldkfjsldfjk.com/200125/EWTRACKNEW_VINT?ewadid=751801&ewbust='ewbust'&eid=1078554&file=$VIDEO$&bw=56&vlen=3:00&vint=PAUSED';
ew_addImage(imgStr);
if (document.addEventListener)
document.getElementById("mov1").addEventListener("qt_pause", ew_pauseTrk, false);
Everything works correctly. I am able to see the image being called when I am looking at Wireshark. The problem is when I click pause more than once.. It seems like the QuickTime DOM Events can only be called once.. Is that true?
Thanks

-(void) flipToEditView {
[self populateTheList]; // populate an array
EditViewController *anEditVC = [[EditViewController alloc] initWithNibName:@"EditView" bundle:nil];
[self setEditVC:anEditVC];
[viewController.view removeFromSuperview];
[self.window addSubview:[editVC view]];
[anEditVC release]; }
}<---- is this } matched elsewhere?

Powershell and Client Object Model - no error thrown if user is added more than once to same site or group

Hello All -
I am trying to add a user to a SharePoint site using PowerShell like below:-
New-SPUser -UserAlias MyDomain\jan20a -Web http://SPServer/sites/MySite
If I execute the above more than once, SharePoint does not throw that user already exists or something. This is not the same behavior in AD/Exchange PowerShell cmdlets.
Also, even the client object model behaves the same way.
Another interesting thing I noticed, I tried to remove a user from group in which the user was not part of it at all and still no error..!!
Looks like SharePoint does not care of invalid input and just ignores it.
Can anyone please confirm this and also the reason behind it ?

It's not really invalid input, since the user exists and that is how SharePoint behaves (will behave same way in browser). Try to input a user that and misspell the name, e.g. say you didn't have a MyDomain\Jan21a, then try to use same script above,
only with invalid data. It will bark at you. Or try using a web that it cannot find, one that does not exist. You'll get what I like to call, the red badge of courage if you enter invalid data.
you can test that sharepoint will let you enter a user twice in the browser, and nothing bad comes from it. Powershell is just unable to tell that the user was not in the site, when you removed it the second time.
Hope that confirms it, if it does please mark this reply accordingly. thanks
Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com

Custom Events and Scheduling more than once

Similar Messages

Maybe you are looking for