Custom fade out/in transitions????

I used to be able to overlap the end of one clip with the beginning of another clip in FCE, use the pen tool to add edit points to the video and audio and create custom fade outs/fade ins. I could get very precise results by adjusting the video and audio at separate areas. How do I do this in FCP X?

You can do it in FCP as well. The video audio fade handles are built into every clip. For audio it's in the timeline.
For video you open video animations for a clip Control-V and double click opacity.

Similar Messages

Looking for a fade out only transition

Is there a fade out transition that only fads out, and not in? I want to put one at the very end of my movie so that when it ends it fades out instead of just cutting off fast. I saw there is a fade in/out transition but that requires it going betwee n two clips. Thanks.

Just place a regular dissolve at the end at whatever duration you need. Or keyframe the opacity.
-DH

[iphone] how to do a fade out/in transition on switch to landscape

In my app when I switch from portrait to landscape I completely change the view. Right now it does the normal animated transition from portrait to landscape and then paints in my new view. This looks kind of stupid.... so what I want is when I switch to landscape it fades in the new view w/o the standard animation.
here's my current code:
- (void)didRotateFromInterfaceOrientation:(UIInterfaceOrientation)fromInterfaceOr ientation{
NSLog(@"done rotating");
ChartController* chartController = [ [ChartController alloc] initWithNibName:@"ChartView" bundle:nil ] ;
NSLog(@"chart view pushed");
NSLog(@"parent view contorller = %@", self.parentViewController);
self.navigationController.navigationBarHidden = true;
[[self navigationController] pushViewController:chartController animated:NO];
Message was edited by: philswenson
Message was edited by: philswenson

Try using willRotateToInterfaceOrientation:duration: instead. The documentation says:
You may also implement this method to swap the view if it should be different for landscape as compared with portrait orientation.

How do I increase default time of fade out audio and video

Hi. Still working with elements 8. Today is another day. I notice lately that I right click on the end of my clip and hit the fade out audio and video
tab but it is a bit short and sloppy for me. I want a slightly smoother and longer fade out audio and video. How do i achieve this? The default time on transitions is fine,,,JUST the fade out on the END of clip?
Thanks Howard

Also, if you want to save a customized fade out for future use, you can do that too.
Google Books has Steve Grisetti's Premiere Elements In A Snap book explaining how to do so. (See pages 165 and 166 at the following link)
http://tiny.cc/ijdi8
This is for an earlier version of Premiere Elements but I suspect the steps are nearly identical for PRE8.

Can't fade in fade out in iMovie?

I am now on my new mac mini using iMovie 10.0.6 and don't see the option to fade in - fade out in transitions. Is there an earlier version of iMovie that works on yosemite that still has those transitions?

Hello IntuitiveOne,
Welcome to the Apple Support Communities!
I understand that you are looking for different transitions in iMovie 10.0.6, specifically the fade transition. To change the style of a transition, please refer to the link and instructions below.
Modify transitions - iMovie Help
With your project open in the timeline, select Transitions in the Content Library section of the sidebar, below the Libraries list.
To preview a transition, skim it in the browser.
Browse transitions to find the new transition you want to use.
Drag the new transition to the transition icon for the transition you want to replace in the timeline.
The new transition replaces the old one.
Have a great day,
Joe

Switching off the fade in/fade out transition when viewing previews

In Library mode, when I'm switching between all my photos, there is a fade in fade out transition as it switches to the next photo. Can I get rid of this transition? I would like to just switch to the next photo without any fancy transition. Possible?

On my Mac version of Lr (4.1) I can't see any such "fade-in/out" effect. Going from one image to the next is pretty much instantaneous.
Sadly, that's about the only thing in Lr 4 that is instantaneous for me.
Phil

Is there a simple fade in/fade out transition?

In Final Cut X, I don't see a simple fade in or fade out transition. Am I missing it? I've recreated it using Fade to Color (black) then adjusting the audio. But seems more complicated than it needs to be.

A very simple way (with full control) is:
Select the clip in the storyline, press Ctrl+V to open up a Video Animation box above the clip.
Click the dark rectangle to the right of the Opacity bar to enlarge it.
Near the top of the box is a thin black opacity control line.
Click the right end of the line, and drag to the left to create a fade-out.
(Click the left end and drag to the right to fade-in).
Andy

Audio distorted during fade in/fade out transitions

I'm using iMovie HD to edit an MP4 file. I've put fade in/fade out transitions at the beginning and end of the movie, but I notice that it either garbles the audio during these transitions or adds a loud clicking noise in place of the audio that should be there (i.e., the original audio fading in or out.)
Has anyone experienced this? Any idea how to work around the problem?
Thanks.

Maybe it is this?
http://docs.info.apple.com/article.html?artnum=107945
Sue

Fade In / Fade Out during CurrentState Transition

Hi,
How is it possible to have elements to be fade in / fade out during the transition of currentstate? Thanks.

Hi,
Check this example.
http://adobe-center.net/devnet/flex/quickstarts/defining_state_transitions.html
It uses Resize effect with some filters. You can use the same technique to get the Fade effect

Transition fade outs are picking up audio

Whenever I want to add a fade out to a movie clip, rather than the audio fading out with the picture, the audio for the duration of the transition is often a clip of the audio from that particular movie clip. I have tried trashing the p-list, and I have also tried erasing some of the problem footage and re-capturing it, but to no avail. This happens to at least I'd say 75% of my movie clips, and I can't seem to solve it. Sometimes the audio in the transition is audio from the very end of the clip I am fading out of (i.e. it loops it), and sometimes it's just from a random point somewhere in that particular clip, but then on a couple of occasions, the fade out is actually audio from a totally different clip.
Can anyone help?
Thanks in anticipation....

Hi C
Just one thought: I do like this
• select clip or clips before applying a transition so that they are selected
• Up on Advance Menu - down to Extract audio
• Now apply the transition after or between the clips
• Now fix the audio by letting it fade out or as You like it
Yours Bengt W

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How can I have an object toggle between fade out and fade in with button?

Hello all,
I have a problem and I was hoping someone out there could help me out with it.
I have smart shape that is set to show for "rest of project" on one of my early slides. It is not visible in output in the properties, but when a user clicks a button in the project, it should fade in and then stay visible. If the user clicks the same button again, it should fade out and stay hidden. So rather than toggle between show and hide, which I know how to do, I want it to toggle between fade in and fade out. I am having trouble with this. Setting its transition to fade in and fade out in the properties of the smart shape doesn't help...
Here is the advanced action I have attached to the button that should allow the user to toggle between fade in and fade out. The "if" parts works -- the object fades in and then finally "shows" at 100% the "else" part almost works. It fades out, disappears, but then shows again, which I obviously dont want it to do. I want it to stay hidden.
If you can help, it would be great!!

I Don't
But as a work around you could try increasing the canvas size to match the illustrator file, paste in the object then crop off the excess canvas in photoshop

The volume on the second half of my Quicktime slideshow fades out--and I don't want it to do that!

I used FotoMagico 4.0 to make a slideshow. There are options for exporting, and I chose the one called Custom, which makes a Quicktime movie. For some reason the volume in the second half of the show starts to fade out, and by the end I can barely hear anything. If I export to their Standalone Player, which allows the slideshow to play on a Mac computer, everything works just fine. I'm at my wits end trying to figure out how to fix this. I want to be able to export the slideshow to Vimeo so that people on Macs and Pc's can both watch it, but I can't do it with the volume the way it is.

Go to System Preferences. Then under the General tab, there is a tick box saying "Restore windows when quitting and re-opening apps." Un tick that box. Once you start and quit Safari again, it will go back to your home page.

Image swaps with fade out and in

I am new to Dreamweaver, in fact only got into it to do my
own website. I want to create image swaps with a fade out and then
fade in with the new image. Nowhere can I find out how to do this
so far. Can anybody point me in the right direction. Many thanks
for your help now and in the past.
Perspectivist

This is a multi-part message in MIME format.
--------------000605070301090808040601
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
i see! well, that's good to know. i didn't realize you could
do
transitions on image swaps (of course, i've rarely used them
so far).
and i just assumed the OP was actually trying to do a
slideshow, which
could still be the case i guess. i suppose he's covered
either way!
Nancy O wrote:
> There are several image transition scripts on this page:
>
http://www.brothercake.com/site/resources/scripts/transitions/
>
>
>
> --Nancy O.
> Alt-Web Design & Publishing
> www.alt-web.com
>
>
>
> "Perspectivist" <[email protected]>
wrote in message
> news:[email protected]...
>
>> I am new to Dreamweaver, in fact only got into it to
do my own website. I
>>
> want
>
>> to create image swaps with a fade out and then fade
in with the new image.
>> Nowhere can I find out how to do this so far. Can
anybody point me in the
>> right direction. Many thanks for your help now and
in the past.
>>
>> Perspectivist
>>
>>
>
>
>
--------------000605070301090808040601
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
i see! well, that's good to know. i didn't realize you could
do
transitions on image swaps (of course, i've rarely used them
so far).
and i just assumed the OP was actually trying to do a
slideshow, which
could still be the case i guess. i suppose he's covered
either way!<br>
<br>
Nancy O wrote:
<blockquote cite="mid:[email protected]"
type="cite">
<pre wrap="">There are several image transition
scripts on this page:
<a class="moz-txt-link-freetext" href="
http://www.brothercake.com/site/resources/scripts/transitions/">http://www.brothercake.com /site/resources/scripts/transitions/</a>
--Nancy O.
Alt-Web Design & Publishing
<a class="moz-txt-link-abbreviated" href="
http://www.alt-web.com">www.alt-web.com</a>
"Perspectivist" <a class="moz-txt-link-rfc2396E"
href="mailto:[email protected]"><[email protected]></a>
wrote in message
<a class="moz-txt-link-freetext"
href="news:[email protected]">news:[email protected]</a >...
</pre>
<blockquote type="cite">
<pre wrap="">I am new to Dreamweaver, in fact only got
into it to do my own website. I
</pre>
</blockquote>
<pre wrap="">want
</pre>
<blockquote type="cite">
<pre wrap="">to create image swaps with a fade out and
then fade in with the new image.
Nowhere can I find out how to do this so far. Can anybody
point me in the
right direction. Many thanks for your help now and in the
past.
Perspectivist
</pre>
</blockquote>
<pre wrap="">
</pre>
</blockquote>
</body>
</html>
--------------000605070301090808040601--

Audio cuts off during fade to black transition

After completing my movie, I tried to add a simple fade in at the very beginning and a fade out at the end. The video image fades fine but the audio is off altogether during both transitions.
What's weird is that if I look at the audio track in the precision editor, it looks like it fades in and out perfectly with the video.
Please help!
Thanks,
Jeremy

Any takers? I'd be very keen to learn how to do this as well.
I have a "fade to black" at the end of my movie but I don't want the audio to fade until the end of the clip.

Custom fade out/in transitions????

Similar Messages

Maybe you are looking for