Custom field in Account Master Data Tcode BCA_CN_ACCT_03 - Display Account

Hi all,
I want to add a custom field in Basic Data tab of display account screen : Tcode BCA_CN_ACCT_03. 
Please give step-by-step solution.
Points assured!
Jogdand M B
Edited by: Jogdand M B on May 19, 2008 5:36 PM

Solved by myself
I write here the response because I didn't found it anywhere:
When you are adding a custom field to MAKT table you have to add it to appending structres SKTEXT and DMAKT too because the standard uses them to read/write the data to MAKT. It's easy to do but hard to find out

Similar Messages

  • Custom Field in Asset Master Data

    Dear Experts,
    I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
    I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
    I'm using a new installed SAP GUI 7.3 .
    The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
    The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
    Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
    Thank you.

    Hi Karim
    You can go through the steps below to customize the field u2018Planned. retirement onu2019
    1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
    Alternatively
    2, Use AO21 to customize the field as above.
    Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
    Hope itu2019s helpful
    George

  • How to add new fields in asset master data

    Hello,
    i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
    Thanks.
    Pedro

    Hi Pedro,
    SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
    You can configure them @ the following 3 nodes in IMG:
    Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
    Regards,
    Vishal Thakur

  • How to display field Functional Location Field in Asset Master Data

    Dear Experts,
    I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
    I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
    I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
    Thank you
    Best regards,
    Frans

    Dear Frans,
    I am sorry this is not possible.
    Note 140482:
    The field was created as a precaution. However, it is not being used at 
    present and consequently is not supplied.                               
    In particular, you cannot use the field as a criterion for a selection  
    in Asset Accounting reporting. This is still true even if this field has
    been included in the selection view delivered for the dynamic selections
    by modification.                                                        
    regards Bernhard

  • Add additional field in Vendor master data for VAT Reg. No.?

    Add additional field in Vendor master data for VAT Reg. No.?
    Hi I need to add one additional field for other VAT Reg. number in vendor master data FK01, We currently have two field
    Current Settings:
    Country : LFAS-LAND1
    VAT registration no.: LFAS-STCEG
    I need to add one additional field for text information. Is this possible?
    Thanks you very much
    Luis G.

    If you want to add new fields that are not possible from config (check with your consultant) you need to implement BADIs
    In SPRO, go to:
    >Logistics-General
    ->Business Partner
    -->Vendors
    --->Control
    >Adoption of Cusomter's Own Master Data Fields
    and read the documentation provided there.
    You will need to implement following BAPIs
    Processing Master Data Enhancements: VENDOR_ADD_DATA
    Customer Subscreens: VENDOR_ADD_DATA_CS
    I am not aware of any other way to add new fields to Vendor master (however, check with your consultant for config related screen modifications)
    Should you need any further info to implement it, post back (read it thoroughly first, it's quite self-explanatory).
    regards,
    Aabhas

  • Adding custom field to product master general tab

    Hi All,
             i want to add a custom field in Product master creation (commpr01) ,could any one help me out on this !
    Many thanks and Regards.

    Hi
    You can create field using EEWB or follow the following simple process
    1. Create the required field as " attribute" using the tcode COMM_ATTRSET
    2. Assign it to a set type using the same tcode COMM_ATTRSET
    3. Assign this set type to the product category usign the tcode COMM_HIERARCHY in the set type tab and use the view ID as "BASIC"
    The field will then be available to you in the product master to the products with are created with the named product category
    Hope this helps
    Regards
    Rekha Dadwal
    Edited by: Rekha Dadwal on Mar 19, 2008 1:19 PM

  • Active cost center field in FA master data (subnumbers)

    hello,
    I would like to ask you, what is the path in SPRO if I want to active cost center field for maintanancne in subnumbers?
    Thanks
    Hana

    Go to SPRO-Asset accounting->Master data->Screen layout->Define screen layout for asset master data. There inside the screen layout tab go to Logical Field groups and inside Time dependent data you will cost center field mantenance.
    This screen layout would be assigned to your relevant asset class in SPRO transaction OAOA.
    Thanks and regards
    Kedar

  • Is there a SAP standard way of dl/up G/L accounts master data?

    I was asked to create a download program to get the G/L account master data from one server and create an upload program to automatically create the G/L accounts.
    Download: Access SKAT, SKA1, SKB1 -> save to spreadsheet
    Upload: Batch input or maybe read up on how to do it using LSMW.
    Halfway in making my the program, it occured to me that maybe SAP has a standard way of doing this?
    Tried to search for it. Found FS15/FS16.
    Would these do it? How do they work?
    *Both source and target systems are running SAP 4.7

    <b>NO!</b> fs15-16 is for two servers
    1)fill field filename in fs15
    example '<b>0001</b>'
    2) transfer file per ftp
    from /sapmnt/XXX/global/FBIS<b>0001</b>
    to oth. server same directory and filename
    with XXX = sy-sysid
    3)and use the same file in fs16 <b>0001</b>
    Message was edited by: Andreas Mann
    Message was edited by: Andreas Mann

  • Custom fields on Material Master - ECC6.0

    Hello
    We have added custom fields on material master basic data screen following these steps :
    1) Copied Func. grp MGD1 to Z Fgrp via Spro -> Logistics General ..
    2) Created a subscreen in Z fungrp by copying screen from original program.
    3) Deleted the unwanted fields and added new fields to the layout and Fields in PAI.
    4) Attached the subscreen in screen sequuence via SPRO
    We are now able to see the new fields on the baisc data screen and also able to input data in these fields , but on SAVE the data is not getting saved to database table MARA.
    We have also referred to OSS note 44410 but with no help.
    Are we missing something , is there anything additional that needs to be done in ECC6.0 ?
    Thanks

    Hi Kalidas,
    In your customized subscreen, did you update the PAI to include your custom field?
    process before output.
    *                      Verarbeitung vor der Ausgabe
      module init_sub.
      module get_daten_sub.
      module feldauswahl.
      module sonderfaus.
      module sonfausw_in_fgruppen.
      module feldhistorie.                         "Aenderungsdienst
      module bildstatus.
      module zusref_vorschlagen_b.
      module refdaten_vorschlagen.
      module zusref_vorschlagen_a.
      module set_daten_sub.
    process after input.
      module get_daten_sub.
    * Put your custom fields here to copy to structure for saving
      field: mara-zzcustom.
      module set_daten_sub.

  • Specific Field Selection for Master data

    Hi Gurus,
    I am looking for a master data field which is suitable to my requirement.
    Requirement : We have GL accounts and loading data into Hyperion. in Hyperion they are doing data summarising GL Accounts to FRP Codes. Lets say we have 2000 GL account and they are reducing to 150 FRP Codes. This FRP contains different description as well. Mapping between GL account and FRP Codes is in Flat File, right now we want to upload FRP values thru this flat file but in the future when we create new GL Account using FS00 we need to update FRP Codes in the respective master data fields.
    We have SKA1 and SKB1 (GL account master data tables). Please some tell me which are the field in this tables or any other tables use for my requirement. My client dont want to go for Generic. I m not FI consultant......
    Thanks
    Ganesh.

    Do you want to maintain GL Account - FRP Code data  ..? or Just FRP Codes from Flat Files.
    If it is just FRP Codes from flat file then when you create InfoObject for FRP code, also create data flow and load the FRP values
    My recommendation here is that, instead of maintaining seperatly for GL Account and FRP codes combinations, I am suggesting you go by adding FRP code to 0GL_ACCOUNT infoObject.
    when you maintain Enhancement in the R/3 system where you do look up in SKA1 or SKB1 tables ..we are straight way getting even FRP Code from R/3 system. So, when a new GL Account records is extracted to BI system, you also bring the FRP Code for that GL Account (as it populated in the code)
    Hope I have said you need otherwise, please give a detail on how you want to maintain with an example..
    Regards,Vj

  • PR- PO Account Type- Account Master Data Mismatch

    Dear all,
    I came across  a serious problem for us in SAP. Briefly, I  opened a PR or PO which has account category type K- Cost center. In addition to this, I used an account which had been defined as internal order obligatory in  account master data . As a result , system did not issue any messages for  this mismatch. I want to have  standart messages like goods movements which are issued by system.  Is there any configuration to solve this problem?
    Regards...

    OSS answer for my question:
    "Dear Development Team,
    I noticed in MIRO that the PO 4500424855 contains the GL acc. 760015007.If you check the customising for this account you will find that the
    field CO/PP Order has been defined as a required field. Since an order
    has not been entered in the PO, the MIRO is looking for it.
    In older versions a validation check was made at the time of PO
    creation to stop users creating PO's that could not be received/invoicedhowever this functionality has changed.
    In Releases lower than 40A, during the creation of the Purchase Order
    a check was carried out, comparing the field selection of the G/L
    account with the field selection of the account assignment category.
    Such a check is no longer carried out as of Release 40A.
    When the two tables T162K and T004F are evaluated, the actual contents
    of the fields are not evaluated.
    If you want to get an internal order at the time of MIRO you may
    consider to use FI substitution(Tr-code OBBH) to determine the
    internal order for the G/L account (please see note 42615).
    Or you can check the transaction OKB9.
    To create an own check at the time of creation the PO or PR
    you may consider the BADIs ME_PROCESS_PO_CUST or ME_PROCESS_REQ_CUST.
    Using the BADIs you can make your onw checks and create error messages.
    I apologise that I cannot provide a better answer to this problem but
    it seems as though the system is behaving as designed."

  • Bank Master Data ( Creation of new Account )....

    Dear SAP Gurus,
       Good morning to all,i have one doubt regarding creating a new Bank Master Data in Production, please help me.My user has a requirement which is like one Cash Credit Account has been opened with SBI bank where with the same bank and branch there is already an existing Current Account,now my client wants from me to create a bank master data for the new bank Cash Credit  Account( as he is saying that he has to maintain BRS).
       Now i have to know that what is the best practice in sap whether i should create one more  master data for the new Account or i should attach the new account with the existing Bank Master?
    Please help it is urgent.I'll be waiting for your valuable suggestion.
    Regards
    Rajiv Kapur

    Hi Rajiv,
    Creation of new house bank will not serve purpose in better way, it is only required when there is a complext scenatio in check printing but that does not appear in your case.
    So, create a new Bank Account in the existing House Bank, this will be included in Bank Reconciliation. Moreover, creation of Bank account instead of House Bank will also ease some maintainance in Bank Reconciliation statement configuration.
    Regards,
    Chintan Joshi

  • Nessessary  Field  Required in Master Data to  run Of MRP

    Dear All
    As Per The Requirement of  MRP Whats the nessessary  Field fillup in Master  Data Of a Particular Finished Product & Also Raw Material.
    Thanks
    Pankaj Agarwal

    Hi Pankaj,
    For MRP Type PD, other important fields for MRP are
    MRP1
       - Lotsize
       - MRP Controller (Reporting purpose)
       - MRP Group (Generally not a mandatory field) but certain parameters can be defaulted in configuration for an MRP group.
    MRP2
      - Procurement type
      - Special Procurement type (if special planning process is going to be used)
      - Inhouse Prodn / Planned delivery time
      - Schedule margin key
      - Safety Stock details if safety stock is planned for material
    MRP3
    - Strategy Group
    - Consumption mode and Forward consumption and Backward consumption details if it is a MTS strategy used.
    - Availability check (Group)
    MRP4
      - BOM Selection method
      - Individual and Collective indicator
    Hope this helps....Reward your points....,
    Regards,
    Prasobh

  • GL account master data download

    Hi Experts,
    I want to download the GL account master data from Quality(testing) system and i want to upload the same into Development system via LSMW as the number of GL account master data is more.  Can anybody tell me how can i download the gl account master data? so that my uploading work will be easy.
    Thanks in advance

    Hi,
    Go to path : Accounting -->Financial Accounting -->General Ledger -->Master Records -->G/L Accounts -->Collective Processing -->OB_GLACC11 - Chart of Accounts Data / OB_GLACC12 - Company Code Data  / OB_GLACC13 - Descriptions click on OB_GLACC11 or OB_GLACC12
    And enter  give company code and Execute (F8) click on Select all records click on Print button  and click on List > Save / send>File an select Spreadsheet and enter and save the excel sheet and upload through LSMW
    Thanks,
    Raviteja

  • MM Manage mandatory field in material master data

    Hi,
    i need to manage some fields in MM01 and MM02 in order to have these fields mandatory if other fields have particular value. For example, if material type is ZFER and Prod.hierarc (in Basic Data 1) is AL001, only in this case i want that field Comm./imp. code ,in view Foreign Trade import, is mandatory.
    I'm looking for an user-exit. I find EXIT_SAPLMGMU_001 but with this solution i have a problem. The mandatory of field is active only during saving, on the contrary i would like that this mandatory will be similar to the standard.
    Thanks for help,
    Michele Garofalo

    Hi,
    I would like to make a field mandatory in Master Data.....how can i make a field mandatory field?
    please provide me solution for this one
    Cheers...

Maybe you are looking for

  • EXCEL TO SQL USING SSIS Error

    I have an .XLSLX File.  I have a DFD Task to export that xlsx file into SQL. I use SSIS 2008. However when I run the package, it fails with this error below. [Connection manager "Excel Connection Manager"] Error: SSIS Error Code DTS_E_OLEDB_EXCEL_NOT

  • Array of variable-length lists in Action Engine

    I'm starting work on a application that consists of multiple sub-panels which each present a specific subset of the hardware functionality.  The hardware appears to the host mostly as memory-mapped registers.  I'm considering implementing the hardwar

  • Problem editing .mov files in CS6

    Hi Adobe folk, I've uploaded .mov files from my Canon 7D camera onto Adobe Premiere CS6, but after doing some editing the footage in the playback screen is very jerky/slow. I'm working on a brand new iMac OSX and have a RAM of 4GB, so I have no idea

  • BAPI_CUSTOMER_GETLIST returning one less result when multiples of 100...

    Good day, All We call BAPI_CUSTOMER_GETLIST to return address information (ADDRESSDATA) for a group of customer records (IDRANGE).  Problem is that when the number of customer records is 201, 301, 401, 501, ... the address records that are returned a

  • How to backup mail in 10.3.9

    I'd like to know how to backup Mail in 10.3.9. Help says to: Copy all the files located in Home/Library/Mail. Copy the file "com.apple.mail.plist," located in Home/Library/Preferences. Copy the folder "AddressBook," located in Home/Library/Applicatio