Custom Field no longer works as an attribute since upgrade from 5.2 to 5.3

We have just upgrade from CUP 5.2 to CUP 5.3 SP8.1 and it seems that the custom field that could be used in 5.2 as an attribute in the logic used to control initiators no longer works as an attribute in 5.3. The initiators that are now configured with the custom field still work but when we try to change or create a new one it errors saying that the custom field is not an attribute and stops me from including it to use as a flag. I looked in the attribute tabs list and the custom field is not listed but it still show in the drop down list in the change initiator screen select attributes selection.
Has anyone else seen this and if so do you know how to allow us to use a custom field as an attribute in the initiator select attributes screen.

Hello Clark,
try to change the "applicable to" option in custom field configuration to initiator.
Best regards,
Bianca

Similar Messages

Script no longer works in mail V3 since upgrading from 10.4 to 10.5

I used the script below to generate mail messages. Under 10.4 it would just send the message, now under 10.5 it puts it in the Out Box and that is it.
Anybody knows how to fix this so it sends it immediately?
Secondly I used to be able to set sender to any of my accounts for example "[email protected]" or any address I liked, this too is no longer working as it uses always the main account from Mail it is send from.
Anybody knows why or how to fix this?
set theBody to "abc"
set theSubject to "XYZ"
set theTarget to "[email protected]"
tell application "Mail"
set newMessage to make new outgoing message with
roperties {subject:theSubject, content:theBody}
tell newMessage
make new to recipient at end of to recipients with properties {address:theTarget}
set sender to "[email protected]"
end tell
send newMessage
end tell
thanks

I don't know if this is still an issue for you guys, but I've been experiencing a problem with the MouseWheelListener added to a Component that is added to an Applet. This is browser independent, but appletviewer/browser dependent.
Check this link for some test cases:
http://www.darkdom.com/prototype/coordinate/test/test.html
I thought it had something to do with the event getting "consumed" by other listeners, but it seems like it only has to do with the MouseWheelListener.

IPod no longer works with car stereo since upgraded MBA & iTunes

My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
You can try to blow it clean, if you have a can of compressed air or gas.
Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
The Reset sequence may send a signal to the Car stereo to do the right thing

Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work. Does anyone have a remedy for this?

Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade. But phone call is still working. Tried resetting phone and repairing device. Still not working. Any suggestion?

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

I find that after updating my ipad to ios8 banking applications to deposit funds no longer work. The camera image rotates from horizontal to vertical and cannot be corrected. Is this a new ios8 error. I tried two different bank applications for ipad.

I find that after updating my ipad to ios8 banking applications to deposit funds no longer work. The camera image rotates from horizontal to vertical and cannot be corrected. Is this a new ios8 error. I tried two different bank applications for ipad.

Hi, Thanks for that further bug description In Your Last Message That Describes The Problem I Am Having perfectly and is exactly the same for me.
unfortunately that fix for my camera Powershot G6 does not work or apply as the view pictures switch is different on G6 is not usable during download as once you plug in DC/USB cable it turns off, and makes no diff and problem still exists exactly as you just described.
thanks anyways "Selz Boy"
it has been 17 days since apple promised to get back to me within 3-5 days hopefully with a solution, but I have still not heard from them.
They blew me off, i guess, probably i will have to wait for new Yosemite OS update, which they pre-warned me could take as much as 6 months.
I cannot believe apple released this new update with such major bug issues for camera downloads and that horrible "Photos" pgm which has all sorts of downgrades in features, usefulness and new bugs compared to iPhotos which I just finally got used to and was much better software.
I am starting to lose faith in Apple and I am getting that Microsoft "FEEL" like I used to have when I was a PC user, which was why I originally switched to Apple computers in first place.
Oh well got my fingers crossed here.
Thankfully the memory card reader solution is working well, but cost me $45.

Since upgrading from Mavericks to Yosemite Mail, Spotlight,Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

Since upgrading from Mavericks to Yosemite Mail, Spotlight, Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

If you have an external drive with an OS X Time Machine backup, then do restore of your last backup. If you have an external drive with a bootable clone of your previous system, you can boot to that clone and re-clone the OS X on your external drive back to your Mac's internal drive.
If you do not have either of these available, then the reverting/restoring process becomes much more complicated and involves purchasing an external drive and backing up your current system to that drive, then erasing, reformatting your hard drive and now your only options to installng an OS X version is doing a clean install of OS X 10.6 Snow Leopard, then upgrading, again, to either OS X 10.7 Lion or 10.8 Mountain Lion. OS X 10.9 Mavericks is no longer available for download and Apple has not made OS X 10.9 Mavericks available in any other form to be able to redownload and install.
Maybe it would be better to explain in detail your issues with Yosemite to see if any of us here can help you with your difficulties.
I am not running or using Yosemite, so I cannot help you with your Yosemite issues,
There are others here who can help you with Yosemite.
Good Luck.

Calls have been dropping out mid-call (after initially working) with full reception since upgrading my iPhone 4 to iOS5 (can hear them but they can't hear me).

Calls have been dropping out mid-call (after initially working) with full reception since upgrading my iPhone 4 to iOS5 (can hear them but they can't hear me). The call initially works but then after a minute or so, they stop hearing me, even though I can hear them. Sometimes it goes the other way and I can't hear them.
Please advise how to remedy ASAP.

PS: I have had full reception bars when this has occured on a 3G network in Sydney, Australia (3 Mobile).

Why does 'Interpret Fields' no longer work in Premiere CS4?

Although I have moved on personally, my office still uses CS4. For some reason the interpret fields function no longer works, so all my interlaced footage has to be made progrssive to output it!!
If I load an interlaced clip into the source and view it at 100%, then mess around with the interlacing options...NOTHING HAPPENS!
I am at my wits end, Adobe no longer support CS4 and re-install didn't help at all.
Any insight would be greatly appreciated.
Jim

Thanks Ann but no dice.
I'd already trashed the prefs (in fact I printed them off, ripped them up and burned them for good measure!)
Media & databases also binned.
I was thinking it may be a corrupt dll or plugin somewhere, but no idea which one might handle the interlacing?
Jim

How to make added custom field Delta mechanism work for LO Cookpit?

We appended a new custome field into extraction structure of the LO Cookpit datasource 2LIS_02_ITM through RSA6. And then run CMOD to write the exit code to populate the value and it works fine. But after we read Roberto's Weblog:
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it , find the enhancement we did can't make the Delta mechanism works if only this new field gets changed in a record, and the change cannot be reflected on BW.
In order to make the Delta mechansim works, one option is to append the custom field into one of the LIS Communication Structure MCEKKO of 2LIS_02_ITM extraction structure and then write the enhancement code to this LIS Communication Structure. In this way, the custom field can be treated like standard field that whenever it gets changed, the Delta mechanism or the user exit will be triggered. The enhancement for this LIS Communication Struture is LEINS001.
Now we've got two problems when doing the above enhancements of the LIS Communication structure:
1. Maintain extraction structure problem in LBWE:
We added a custom field, e.g., called ZZZ in LIS Communication structure MCEKKO (Purchasing Document Header) by creating a new custom append structure and add the field ZZZ into it, then activate the new append structure, but get warning msg like "Field name DUMMY is reserved (Do not use structure as include in DB table)".
We do find a field called DUMMY in the structure MCEKKO. How to get rid of the warning msg and successfully activate the new custom append structure with the new field ZZZ?
You could say that we can ignore the warning msg, but why the new custom field appended can not be seen from the right side pool of the Maintain Extract Structure in LBWE? We need to make the new custom field shows up in the right side pool and then drag it over to the left side frame and to activate the extraction structure to change it. But now it doesn't show up in the right frame pool!
2. Refer to Sanyam's weblog
/people/sanyam.kapur/blog/2005/04/30/custom-fields-and-bw-extractors-making-a-mixed-marriage-work-part-ii, there is a sample code inside this article which tells us how the sample code looks like to write this LIS Communicaton structure enhancement to make the Delta mechanism works, below is the code we modified to suit our needs, but don't know if it would work?
DATA: i_t_ekko LIKE ekko   OCCURS 1 WITH HEADER LINE.
DATA: ebeln LIKE ekpo-ebeln,
      it_ekko TYPE TABLE OF ekko WITH HEADER LINE,
      old_val(50) TYPE c. "For storing the value from the Field Symbol
FIELD-SYMBOLS <fs> TYPE ANY TABLE.
CASE zeitp.
WHEN 'MA'.                            "When creating a purchase order
    MOVE '(SAPLEINS)T_EKKO[]' TO old_val.
    ASSIGN (old_val) TO <fs>.
    i_t_ekko[] = <fs>.
    LOOP AT xmcekko.
      ebeln = xmcekko-ebeln.
      IF xmcekko-supkz = '1'.            "Old Value ?
        SELECT SINGLE * FROM ekko INTO it_ekko WHERE ebeln = ebeln.
        xmcekko-ZZZ = it_ekko-ZZZ.
      ELSE.                              "New Value ?
        READ TABLE i_t_ekko WITH KEY ebeln = ebeln.
        xmcekko-ZZZ = i_t_ekko-ZZZ.
      ENDIF.
      MODIFY xmcekko.
    ENDLOOP.
EndCase.
Share your ideas and we will give you reward points!

Hello Kevin
We have exactly the same problem. Did you solve it? If you did, could you please tell us how you did it? We neither see our field in LBWE. Our field is a Z field from a Z table.
I hope you could help us. We just have this issue to finish our project.
Thanks a lot in advanced

Android remote iTunes app no longer works after 10.5.2 upgrade.

Until the 10.5.2 iTunes update, I was able to use the Android app, Remote for iTunes, to enable my Android tabs to control iTunes on my Windows 7 machine. After this upgrade, my tablets no longer show up as "devices" in iTunes. Am I the only one to experience this?

Thanks for your replies.
I don't think I described my problem adequately. Before updating to 10.5.2 the clamshell mode worked correctly: I closed the lid, waited 30 seconds, then touched the keyboard and - presto! - the cinema display came alive with the desktop shown. I understand how the clamshell mode is supposed to work because it used to work just fine.
My problem now is that it no longer works the way it is supposed to. If I wait 30 seconds after closing the lid of the MBP and then touch / attach an external keyboard, nothing happens. I am following the proper steps to use clamshell mode (at least the steps that previously worked), but they do not appear to be effective any longer.
I appreciate the advice I have received about how the clamshell mode is supposed to work. Unfortunately, following those standard steps is not leading to successful operation in clamshell mode.
Thanks,
Danny

AirPrint no longer works after 10.6.5 upgrade

I followed the instructions in the following discussion thread (i.e. ran the mentioned script) and Print was working perfectly from my iPhones and iPad. Then other day I updated the OS to 10.6.5 and printing no longer works. I assumed that the changes were overwritten by the OS update so I just ran the Script again, same as before, however Printing still does Not work. Please advise. Could it be that Apple realized this work around and plugged it just to **** their "valued" customers.
http://discussions.apple.com/thread.jspa?threadID=2658720&tstart=0
Thanks in advance.

Then other day I updated the OS to 10.6.5
The other day?
Your post in the other thread on 29 November shows you had 10.6.5 installed.
Also I can't explain why but it most certainly did work with the previous OS X
AirPrint is not dependent on the OS
It is dependent on the printer firmware. The printer needs to be on the local network and does not need to be connected directly to a computer.
The fix in that other thread allows iPads to print to printers connected to a Mac.
The code that allows this was not present in Mac OS prior to 10.6.5
If it worked previously, it sounds like you have an AirPrint compatible printer.

App Store Pages no longer works on Snow Leopard after upgrade

I bought Pages (and Numbers and Keynote) from the App Store last summer. I have been using it on Snow Leopard (10.6.8) with no problems up until a few weeks ago. Since then I must have told the App Store application to update all applications with updates (though I don't particularly remember doing that), and now when I attempt to open Pages I get a dialog box saying "You can't use this version of the application Pages.app with this version of Mac OS X. You have Mac OS X 10.6.8. The application requires Mac OS X 10.7.4". This is outrageous. How can a routine update of a App Store app stop it from working without any kind of warning? How do I revert to a version that will work on Snow Leopard? Don't just tell me that Pages isn't supported on Snow Leopard, because the version I bought last summer has been working just fine. Am I supposed to Google through pages and pages of information looking for warnings before I upgrade each application before updating? (I also own Aperture.) And what if I make a mistake and accidentally upgrade to a version that no longer works?

Which version of Pages 09 do you have? You don't need higher version than 4.0.4 on Snow Leopatd. Here you can download the iWork 9.0.4 update.

W520 webcam no longer working after Windows 8.1 upgrade

Hello,
I upgraded my w520 from Win 7 to Win 8 last year with zero problems.
Now I upgraded my W520 Win 8 to Win 8.1 via the store download. Except the webcam everything works fine.
In e.g. the Skype desktop application, Google Hangouts or the camera app, the built in webcam no longer works.
The green light turns on, but I just get the crossed out camra icon in e.g. the Skype video options. No video.
I see there are no drivers yet for Win 8.1 on the Lenovo support site for the w520 camera.
In device manager it still shows the 2011 camera driver 1.1.0.1147 and says "This device is working properly."
But it does not work properly.
Did anyone get the camera to work or is it just a matter of waiting for a driver to be released eventually?
I tried uninstalling, reinstalling, camera is enabled in the Bios and permissions are set to give Skype and the camera app access to the camera. I also tried the W530 drives as was suggested elsewhere.
Thank you!
Solved!
Go to Solution.

try getting the communicastion utility installed under 8.1. The crossed image is the cameras security mode.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

Installed Apps No Longer Work After 3.1.3 Upgrade

Last night I upgraded to 3.1.3, and since then NONE of the Apps that I installed works... Each time I try to open any of them, it will open and stop just as quickly, taking me back to the Home screen...
I thought at first it was only the Apps that required Internet Access (IM and/or Email Apps)... However, I was able to open a web page using Safari, and the Email App included in iPhone STILL works... And, like it would normally do, it would check first for a local wireless network, and switch to 3G if it does not find one... However, in this case, when trying any of the Apps I've installed, it does not even check at all for a network or 3G, the Apps just shut down just as quickly as I launch them...
Since then I've discovered that ALL the Apps I've downloaded and installed prior to the upgrade no longer work...
I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
Any information would be appreciated...
Thanks for your time...

TainoV2 wrote:
I have cycled the power on the iPhone (Turning it OFF by means of the SLEEP button, and then back on minutes after than), but that doesn't solve the problem...
Did you try a reboot (by means of BOTH the Sleep and Home buttons and holding both IGNORING the slide to turn off, and keep holding until you finally see the Apple Logo?)
Message was edited by: DaVBMan

Custom Field no longer works as an attribute since upgrade from 5.2 to 5.3

Similar Messages

Maybe you are looking for