Custom field not getting displayed in SUS PO item level

HI all,
We are using SRM 5.0, ECC6.0 and ECS scenario.
As per SAP note 762984, we have enhanced the structures such as :
INCL_EEW_PD_ITEM_CSF_SUSPO
INCL_EEW_PD_ITEM_CSF
and have added a record in the following place in SPRO:
Supplier Relationship management-> Supplier self service->Make field control settings for tables.
| Item | Display | Z.PO.ITM.VIEW
| Item | Change | Z.PO.ITM.EDIT
But we are unable to display the field in the SUS screen.
We had also referred to the following blog :
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
but had no success.
Please let us know if we did something wrong or are we missing something.
Also please let us know if BSP changes are really necessary to do this as neither in the SAP note nor in the above mentioned blog, there is any mention about this.
Regards
Kishan

Hi Bharadwaj,
Thank you for your inputs. I executed the program but it didn't display the field.
But I was able to rectify it by re-creating the steps mentioned in the blog (see original post). I had missed giving correct positions to the custom field.
Regards
Kishan

Similar Messages

Enhanced Datasource fields not getting displayed in Transformation

Hi,
Eventhough after replicating the datasource, the Enhanced Datasource fields not getting displayed in Transformation.
Eg I have done mapping of 6 fields in transformation from datasource to DSO
Now the datasource is enhanced with 8 fields...........The transformation is not showing the added 2 fields
I am deleting the existing transformation.Is this the only solution?
Kindly suggest your answers.
Thanks,
Sonu.

HI,
Deleting is not solution as it is common scnerio.
Go to the data source in BW and in change mode check the option "transfer" for this two fields and then see if its coming or not.
Thanks
Ajeet

SAP Fields not getting displayed on the BDT screen

Hello Gurus,
I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
5. Attach the section to the Subclaim Overview Screen.
6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
Reagrds,
Shiva

Hi Shiva,
did you create your own Z BDT application? Is it set to be active?
I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
Regards,
Frank
Message was edited by: Frank Vieregge

Fields not getting displayed in Sapscript

Hi Guyz,
I have a customized Sapscript form ZPV_INVOICE and its print program RVADIN01. This form outputs the Sales Invoice. When the print preview is triggered, Material number (MATNR) is not getting displayed on the form. However, when the form is debugged, MATNR values are properly fetched and showed (while debugging only, not in output).
Can somebody please let me know the reason, why the MATNR is not getting displayed on the output, even though it is showing values while debugging.
Thanks in advance !

Hi ,
Then check matnr field which is display is same what you are checking in debugging .
COnfirm the field and check whether data stays till end of module .
regards
Deepak.

Screen fields not getting displayed after Line 16

Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

Quantity field not getting displayed

Hi,
I am using Adaptived RFC Model to get Sales Order Data from SAP. The Sales Order BAPI that i am using is
BAPI_SALESORDER_DETAIL. I have mapped the SALESORDER table(SALESOPRDER Model node) to the TABLE UI element in my WebDynpro Application.
The problem i am facing is that while all the fields get displayed the Quantity value is not getting displayed in the appropriate column. I have checked the mapping and everything seems to be fine.
Also when i create a separate value node for the table and fill the value node from the model node the quantity value gets displayed then.
Please suggest what can be the possible cause for this.
Regards
Sidharth
Can you please

Hi,
As far as I understand you display output parameters of BAPI, so check to following things:
1. After calling BAPI model method call invalidate on context node to update the values (e.g. outputNode.invalidaet() )
2. Check that you dispaly output parameters and not input parameters of the table. (e.g. You have Quantity and QuantityOutput node so connect you table field to QuantityOutput)
Hope it helps.
Victor.

Contract item customer fields not getting saved from ITS side??

Hi there,
I have had to add "account assignment" details to a contract item (3 fields: account assignment, G/L account and cost center)...
All is going fine....in fact the 3 fields have been added on the contract item level in function group BBP_CTR_UI_ITS screen 4100. I followed the instructions in SAP note number 458591 "user defined fields: preparation and use"...
The 3 fields I added where "generated" down to SAP table level and now appear in table BBP_PDIGP...
Also when I create a contract from transaction BBP_CTR_MAIN and fill my 3 new fields in on the item level all works fine when I release the contract...the contract item gets created and the 3 new fields appear nicely in table BBP_PDIGP....so from the GUI side all is PERFECT...
I have worked on the ITS side of things quite a bit but now I clearly don't understand something...
I go to "internet service" BBP_CTR_MAIN - template SAPLBBP_CTR_UI_ITS 4100.....I have added my code and my 3 fields display perfectly on the web page....for each contract item.....
As I said I can make the contract with the 3 new fields filled perfectly via the GUI (transaction BBP_CTR_MAIN)....and if I VIEW that contract on the web it also displays perfect with the 3 filled in fields....
If I COPY that contract.....and save the new one, the 3 fields are still fine, all saved.
NOW COMES THE PROBLEM:-)
If I create a new contract from the web, fill in my 3 fields on the contract item level THE 3 FIELD VALUES SEEM TO NOT GET POSTED BACK AND SAVED IN THE SRM DATABASE...
I have tried everything from using FIELD-GET, FIELD-SET...the note I mentioned above mentions some BADI's that I could possibly use:
BBP_CUF_BADI_2 (modify screen methods etc)
BBP_DOC_SAVE_BADI
All I really want to try understand is how interaction between the user clicking on the web page and the SAP GUI screen flow is really happening.....I mean I see in function group BBP_CTR_UI_ITS there are a number of function modules with ITS in them, are those function modules just called when the user is clicking on the web (via ITS etc) - I would assume so...
Bottomline is I need what is happening in the SAP GUI to happen on the web as well.....it is almost there, I just need a push in the right direction so that I can grab the fields from the web page, in the most standard way possible.
Thanks for the help, I am very curious to see how this sort of solved.
Regards
Lynton

He Yann,
We are running SRM 3.0, EBP 4.0 - support pack 8
Thanks for the help
Lynton

Quantity fields not getting displayed in the second total row

Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
Abhishek

You can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel

Fields not getting displayed in AdvancedTable

I have created AdvancedTable region following the steps given in help of Jdeveloper.
Under advancedTable I have created 3 columns, one having a messageChoice item and rest two items are messageTextInput.I have set the ViewObject property of AdvancedTable and have also set the viewAttributes for items.
But when I run the page, It does not display any fields of AdvancedTable. It just gives the table outline and text that is set for table empty property.
I have also executed the VO in processRequest of page's controller.
What could be the reason for the fields not been displayed?
Thanks in advance,
Mitiksha

You should provide the ability to create rows, you can do it on the table by making the table editable and putting a Add another row or you can choose to add it in a drill down create page.
You can also add a set of new rows initially by creating and inserting rows in the vo in your PR.

PO not getting displayed in SUS

Hi All,
When transferring PO from MM to SUS thru XI, the POs are getting displayed in sxmb_moni in SRM but not in BBP_PD and so not in SUS also.
Pleasle et me know what can be done to resolve the issue.
Thanks in Advance,
Manu

Hi,
Seek for IDOC XML in the transaction WE05 or WE20 in SRM, maybe the same has come from the XI with mistake.
In SXMB_MONI it does exhibit some mistake?
In BBP_PD will appear the document if he be carried and servant with success in SRM.
Rgs,
Pedro Marques

View Fields Not Getting Displayed in View Set

Hi All
I have created a new View for Component IUICMDC and assigned it to a ViewSet and on click of a button i need to display this view . The navigation is happening fine but i am not able to see View Fields in it , only ZIUICMDC/AdvSearchVS is getting displayed on top of the page.
View Area is defined and Debugger is stopping in the Do_init method of View which is assigned to ViewSet.
Regards
Alok Sharma

You should provide the ability to create rows, you can do it on the table by making the table editable and putting a Add another row or you can choose to add it in a drill down create page.
You can also add a set of new rows initially by creating and inserting rows in the vo in your PR.

Newly added field not getting displayed in ALV output

Hi All,
   I'm adding one more field/column to be displayed in an old existing program that uses REUSE_ALV_FIELDCATALOG_MERGE to generate the ALV fieldcat.
DATA: BEGIN OF it_salary OCCURS 0,
        pernr LIKE pa0000-pernr,
        ename LIKE pa0001-ename,
        rtext like lv_rtext, -
added field
        waers LIKE pa0008-waers
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = driver
      i_internal_tabname     = 'IT_SALARY'
      i_client_never_display = 'X'
      i_inclname             = driver
    CHANGING
      ct_fieldcat            = lv_fieldcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program      = driver
      it_fieldcat             = lv_fieldcat[]
      i_default               = 'X'
      i_save                  = 'A'
      is_variant              = lv_tmplt
      is_layout               = lv_ls_layout
     i_callback_user_command = 'USER_COMMAND'
    TABLES
      t_outtab                = it_salary
    EXCEPTIONS
      program_error           = 1
      OTHERS                  = 2.
The newly added field is not getting populated in the lv_fieldcat table. Tried running programs BALVBUFDEL,
BCALV_BUFFER_DEL_SHARED then logging off and logging in but of no help.
Please provide suggestion for this issue.
Regards,
Sridevi S

Hi,
Fieldcat is buffered - so use
I_BYPASSING_BUFFER = 'X'
Since a while CL_GUI_ALV_GRID is available which does NOT need any fieldcat (is determined internally using RTTI). It is worth playing around whith this class if you have some time. This class is recommended for ALV Output by SAP (but no edit is possible - was never supported officially).
A simple use would be:
data: gt_output type standard table of (adjust!).
*simple ALV output
data go_alv type ref to cl_salv_table.
data go_functions type ref to cl_salv_functions_list.
data go_columns type ref to cl_salv_columns_table.
data go_column type ref to cl_salv_column_table.
*Exceprion handlig
data: go_exception type ref to cx_root,
      gv_errortext   type string.
** fill table gt_output ...
** ALV output
if not gt_output is initial.
    try.
        call method cl_salv_table=>factory
          importing
            r_salv_table = go_alv
          changing
            t_table      = gt_output.
      catch cx_salv_msg into go_exception.
        gv_errortext = go_exception->get_text( ).
        message gv_errortext type 'A'.
    endtry.
* enable all standard ALV functions
    go_functions = go_alv->get_functions( ).
    go_functions->set_all( ).
* hide MANDT
    go_columns = go_alv->get_columns( ).
    go_column ?= go_columns->get_column( columnname = 'MANDT' ).
    go_column->set_technical( ).
    go_alv->display( ).
Kind regards,
Holger

Custom fields not getting updated in Mass Maintenance-MM17

Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
    segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
    sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
Geeta

I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

Custom field not getting populated in the "Show Results where" drop down

Hi all,
In appointment detail page by clicking on Add button on the user related information section , it takes us to a search layout showing the list of available users.
Here we have to filter the user's based on a custom field which has already been created in the user object. But I am not able to add the custom field in the "Show results where" drop down for which the search has to be done.
It is getting reflected in the normal search layouts.So Can any one tell me why the change is not getting reflected in the user related info search layout?

I tested your use case and you are correct. I would recommend that you submit a service request to CRM On Demand customer care in reference to this issue.

PO Custom Field not getting filled from Shopping Cart

Hi Gurus,
I am new to SRM. The requirement I had was to add a new field to the SC. I read several posts and articles on this but couldn't find the solution to it. I managed to do this modifying the corresponding structures in SRM and making the necessary changes in R/3 so the new filed can be seen in ME21/22/23N.
I checked Andreas Milbredt document to achieve it as mentioned:
Document: How to transfer custom fields from SRM to Backend.
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27
After that, when I create a Shopping Cart, the value in the New field is not transferred to the Back end.
I coded the following BADIs and User Exits:
In SRM:
BBP_CUF_BADI_2 (MODIFY_SCREEN) ->To enable or disable the field depending on conditions. Works fine.
BBP_DOC_CHECK_BADI (BBP_DOC_CHECK) -> To do some checks. Works Fine
BBP_CREATE_BE_PO_NEW (FILL_PO_INTERFACE1) ->Here I fill structures BAPI_TE_MEPOITEM and BAPI_TE_MEPOITEMX. I added another u2018Xu2019 to indicate the new field to BAPI_TE_MEPOITEMX. But I think I am not doing it right. This structure BAPI_TE_MEPOITEM/X, does the order of the fields correspond to the order of the fields in any of these 3 structures (which I am using)?
INCL_EEW_PD_HISTORY_CSF
INCL_EEW_PD_ITEM_CSF
INCL_EEW_PD_ITEM_CSF_SC
I also checked the following link:
Map a custom SRM field to a standard field in R/3
In R/3 I populated the Exits Andreau2019s mentions on his article. Am I missing anything else?
Thanks & Regards,
Ernesto.

Hi Ernesto,
You can find out how your BAPI structure is being populated (by generating the test data ) using FBGENDAT program and activating the BAPI_PO_CREATE1 (and you will need to set the parameter for the specified user id)... This will provide you ability to execute the BAPI offline and figure out what is happening...
Note 517767 - Generate test data for function modules
Things to look for, Is any of your custom fields quantity fields or integer?
Check out the following OSS note
Note 509898 - BAPI enhancement concept and Unicode
Also check out the following SDN Thread,
problem using BAPI_BUS2001_CREATE to create project definition
Check out a similar thread that we are discussing (for PR)
Custom Fileds Data Was Not Getting Updated In BAPI_PR_CREATE

Custom field not getting displayed in SUS PO item level

Similar Messages

Maybe you are looking for