Custom field not visible for Project task in PPM 5.0

Hi,
I have done the SPRO configuration required to add a custom field in Project task
1. Enhance DB table. added the field in structure DPR_TS_TASK_EXTENDED_ATTR, object type TTO
2. Define field groups for custom fields
3. Set up field control.
The custom field tab has come after making SPRO changes. But the field is not visible on the tab.
Please let me know if I am missing any steps.
Thanks,
Yomesh

Dear Yomesh;
You have to config the view or subview at:
SAP Portfolio and Project Management -> Portfolio Management -> Global Customizing -> Global Field Settings -> Assign Fields to Views/Subviews
Here try to to setup the view that you want to see the custom field.
Hope you help you.
Regards.
Mariano

Similar Messages

Custom fields not visible in Active subject area for reporting

Hi all,
I added a custom field to the object Service Request and I cannot find it under the field listing in Active subject area for building a report. The custom field is of the type integer. Any help is appreciated.
Thanks in advance

expand Service Request folder and then expand Service Request Custom Fields folder now the new field should be there

Custom fields not visible in the Active Subject Area column

Hello,
I have created several custom fields in the Object Service Request. I need to create a report with those fields, but some of them are not visible / displayed.
Is there any delay between the custom field creation and its availability in Oracle Answer? Because, only the "old" custom fields appears in the list.
Thanks in advance for your advices.
Laurent

it generally takes one day to appear in analytics

Customized fields Not visible in GUI but visible in PCUI why

Hi,
Can anybody help me, i have a problem which is as followes,
I Enhanced Three fields for Campign in CRM Throw EEWB, these three fields are not appearing in GUI but its appearing in PCUI.
Can some body can give me valueble inputs to solve this issue.
Thanks & Regards,
Sivakumar.

Hi Suyash
In the TS, on the right side, see if these fields are part of the DS.
If yes, then click on them and drop them on the left, in the Transfer structure.
If they are not availabel in the Datasource, then go to RSA6 in R/3 and see if the extract structure of this DS has these fields hidden, i.e if theres a check mark on hide coloumn....
If these fields are not visible in the extract structure then let me know
Regards
Prakash
Assigning points on SDN is a way of saying thanks !!

Account generation workflow custom process not visible in lov

Hi guru,
i have created a sample process in "Project Supplier Invoice Account Generation".
but when i upload the work flow in data base by the concurrent program . i dont find the sample process in " account generation window" in GL.
Please help gurus.
Regards
vishal

Hi,
See the foll notes for solution:
Note 541877 - CUF: Customer fields as checkbox
Note 1016297 - Header customer fields are not displayed in bbpsc02
Note 1034079 - Customer fields not visible in shopping wizard
BR,
Disha.
Pls reward points for useful answers.

Custom fields not display in SRM5.5 Basic Data Frame

Hello Everybody,
      I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
     No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
    I added these fields by help of 672960 OSS notes..
   Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
Is there anything else do i need to display custom fields in basic data frame??
I have one more question..
When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
To display all the fields which are display in GUI Mode also should display in URL..
To bring this functionality , What do i need to do?
I appreciate if you answer these questions..
Thanks,
John.

Hi Disha,
We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF". We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
I will be gald to provide any kind of info.
Thanks in advance...

MSPS 2013 - related a document to the project tasks - Icon is not visible in project schedule

When adding a document (related Items) to the project tasks in a project schedule at the task does not see the icon of the document.
Although the icon issue or risk when binding is visible.
And the icon is also seen in the "Projects Center"
Also related items are not visible in the "Tasks" (http://server/PWA/Tasks.aspx) from the user.
Attachments
View, add or edit related information such as documents, issues, or risks.
Issues
Title
Due Date
Status
Risks
Title
Due Date
Status
Documents
Title
File Name
Status
Maybe someone know why it don't works?

Anyone can reproduce this steps on Project Server 2013:
* Upload document to project site document library
* Open project plan for editing in pwa, add to any task related item – uploaded in previous step document
* Save and publish project
Than check in project schedule and project center – icon associated document to task and project.

Project Commitment Cost not visible for Purchase Orders with Item Categry Q

Hello All
I have a problem. My project commitment cost is not visible for PO's with Item Category Q. I assume that as the stock can be issued against any WBS elements I might not be able to see the cost against a single WBS element. But the cost should get recorded against the project right? If so where can I see it?
Request your help with this problem
Regards
Renjith

Hello
Could you please explain how to maintain that?
Best Regards
Renjith

Using ms project 2007 and vba macro to list all the custom fields used in the project?

Hi,Using ms project 2007 vba macro, I would like to be able to list all the custom fields used in the project and their corresponding field names. e.g. let us say I create a calculated duration field and name it "expected duration" and the name
of the field I select is Duration1.
I am trying to write a macro that will list all the used custom fields such as the result would look like:
Duration1 ---> "expected duration"
Text1 ---> "anything"
Flag1 ---> "....."
Number1 ---> "..............."
Can anyone provide me with the solution?
Regards,
Chuck

John,
I found this module, which provides the the list of custom fields used in the project but does not provide the name given to the field. Here below is the module and hope you could help me achieve this by modifying the macro to list the renamed field.
' MSP Checks all Custom Task Fields
Sub checkfields2()
'This macro will check and report out which custom task fields are used
'It requires Project 2002 and above as it relies on the GetField
'and FieldNameToFieldConstant methods which were not introduced until
'2002.
'It does not include resource fields, however it is a simple matter to
'do it by replacing the pjTask constant with pjResource.
'Copyright Jack Dahlgren, Oct. 2004
Dim mycheck As Boolean
Dim myType, usedfields As String
Dim t As Task
Dim ts As Tasks
Dim i, it As Integer
Set ts = ActiveProject.Tasks
usedfields = "Custom Fields used in this file" & vbCrLf
myType = "Text"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 30
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Number"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 20
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Duration"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If Left(ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)), 2) <> "0 " Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Cost"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> 0 Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Start"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
myType = "Finish"
usedfields = usedfields & vbCrLf & "--" & UCase(myType) & "--" & vbCrLf
For i = 1 To 10
mycheck = False
it = 0
While Not mycheck And (it < ts.Count)
it = it + 1
If Not ts(it) Is Nothing Then
If ts(it).GetField(FieldNameToFieldConstant(myType & i, pjtask)) <> "NA" Then
usedfields = usedfields & myType & CStr(i) & vbCr
mycheck = True
End If
End If
Wend
Next i
MsgBox usedfields
End Sub
This is what the module gives me. But I would like to have beside Text 1 the name that is shown as below. e.g Text1 is "Test".
Would you mind helping me achieve this?
Thanks in advance.
Chuck

The date update from TFS online are not visible on Project pro

Hi everyone,
I updated the start date and the finish date from TFS online, i saved and refresh the page. Then On the Project pro i clicked on refresh. The update are not visible on project pro.
I don't no why because when i change the title of the task from TFS online. the update is visble on Project pro.
Someone to help me??
Thanks for advance.
rexcs

Hi rexcs，
Since this thread is more related to Visual Studio Online, I will move it to the right forum for a better response. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BPM worklist app views are not visible in IPM task viewer

Hi,
we upgraded our system from 11.1.1.3.0 to
weblogic 10.3.5.0
SOA 11.1.1.5.0 with BPEL processes
ECM with IPM and UCM 11.1.1.5.0
after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users can see tasks assigned to them there. But those views are not visible in IPM task viewer page (i tried it using driver page). Because of missing profiles/views users can't see and process tasks assigned to them. In log files isn't raised any error message.
Everything was working before upgrade. Can someone help me with this? What can i have wrong there?
Thanks a lot in advance for any help
Edited by: 914063 on Jun 20, 2012 12:56 PM
Edited by: 914063 on Jun 20, 2012 12:57 PM

Hi Renuka,
There are basically two ways to create an ADF UI for a BPM Task:
1. Generate it from the task
2. Create a ADF Taskflow based on Human Workflow Task
Since I tell this by heart, I might be slightly wrong in the terms.
You probably want to try the second option. It is accessible from the "New Gallery". You'll have to provide the Human Task from the BPM project, but then you can build up the ADF Taskflow by your self, based on the customizations of the rest of your application.
Should not be rocket science for someone with ADF11g experience. Since it is not my dayly job, I need to figure it out every time again ;). But I did it in the past and it wasn't so hard.
Regards,
Martien

Custom Field not showing in analytics?

We have a custom field on the account object called sales stage. It is a simple pick list (our organization does not use the opportunity object). The custom field is not available in analytics. Is there something on the field setup that needs to be flagged? All of our other fields seem to appear just fine. This is so bizzarre!!
Any help is greatly appreciated.

Hm. Still no answers.
We have a similar problem concerning custom fields not available in Answers. It concerns a custom field for an additional tel no. in the user record type. I thought it might have something to do with the fact that it can only be utilized through the other data types, using "owned by user".
But as you have the same problem, maybe there is a solution... Any idea would be appreciated.

My app went from working fine to: Id field not defined for cfc Path.to.my.ORMCfCPag when I restarted

Hi everyone,
I have a CF9 ORM problem that I haven't been able to figure out and thought I'd see if you had any idea. I have seen a few postings talking about a "similar" problem but none of them correctly resolved this particular issue. I appreciate any help you can offer.
I recently created a CF9 app where I generated scripted ORM CFCs for my app using ColdFusion Builder. It worked great and my app was completely working. However, when I was adding some enhancements, I ran into an error when I restarted the CF app server. Here's the message I keep getting:
"Id field not defined for cfc Path.to.my.ORMCfCPage. Either the table should have a PK column mapped to a cfc field OR at least one field should be specified as id."
My App.cfc file only had orm enabled (no other mappings) when it was working. I've since tried specifying things like the cfc location etc. and it still hasn't helped.
// MORE DETAILS:
- When my app was working, I had moved it to 2 other servers. I had this error on both of those but not on my local copy. They all use the exact same database.
- The last change I made before the error was adding a generator="identity" field to my generated ORM beans. Once I got the message, I tried changing it back and restarting again but still got the error.
- I've also made sure all of the Adobe tags are in my web root (as suggested in a prior posting about this problem). I've search all over for a solution and nobody has a solution posted online that works so far.
Do you have any idea why this is happening?
Thanks!
Jeff

Quick thought and probably not relevant, but do you have this.ormsettings.savemapping set to true in your Application.cfc? I've fallen foul of this before - once CF has generated the hbmxml files and saved them to disk you can make all kinds of changes to your code which won't make a difference as it'll continue to read from the file versions, but only for certain properties and methods at times it seems.
Long shot I know, but I found CF ORM to be a nightmare for seemingly random caching.

E-Recruiting - Internal Candidates not displayed in candidate search, job postings not visible for internal candidates in job search

Hi Friends,
We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
1) What needs to be done for internal candidates to visible during candidate search ?
2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
Kindly provide your inputs.
Regards,
ER.

Hi,
In SLG1, getting the below error messages for multiple times.
"Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY
The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96
Qualification 52000001 does not exist
The incorrect HR object has the key 01NA60000029 "
"The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
Also please state how to differentiate internal and external candidate search pages.
Regards,
ER.

JComboBox - Bottom border is not visible for the first time

JComboBox - Bottom border is not visible for the first time i click on the arrow to drop the list down.
This happens because the list when dropped down goes out of the frame.
If have the increased the size of the Frame then i am able to see it,but i dont want to do this.
I am using jdk1.3.1_02.
Any Help would be great.
Please find the code below.
Thanks,
Sridhar.
//file: Lister.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Lister {
    public static void main(String[] args) {
        JFrame frame = new JFrame("Lister v1.0");
        // create a combo box
        String [] items = { "uno", "due", "tre", "quattro", "cinque",
        "sei", "sette", "otto", "nove", "deici",
        "undici", "dodici" };
        JComboBox comboBox = new JComboBox(items);
        comboBox.setEditable(true);
        // put the controls the content pane
        Container c = frame.getContentPane( );
        JPanel comboPanel = new JPanel( );
        comboPanel.add(comboBox);
        c.add(comboPanel, BorderLayout.NORTH);
        c.setBackground(Color.white);
        comboBox.setBackground(Color.white);
        comboPanel.setBackground(Color.white);
        frame.setBackground(Color.white);
        frame.setResizable(false);
        frame.setSize(200, 200);
        frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
        frame.setVisible(true);
}

Hello,
try this:JPanel comboPanel = new JPanel(new BorderLayout());Regards,
Tim

Custom field not visible for Project task in PPM 5.0

Similar Messages

Maybe you are looking for