Custom fields at checklist item to be displayed based on the checklist type

Hello,
We have developed custom fields at the checklist item level. Now we want these fields to be displayed on the basis of the checklist type.
We have explored the notes 931274 and 942672 and based on these we have created the new condition Z001. Following these notes, we have created the schema Z_EVAL_CONDS_Z001 in SE38. However, we are not able to set breakpoints in the schema and / or debug the same. Hence, we are unable to write the required logic for filtering the fields based on checklist type.
Any help in this area will be appreciated.
Regards,
Abraham.

Hi Abraham,
You can find the generated method in class: /1CPR/CL_XXX_YYY_ITO, where:
- XXX is your client number.
- YYY the name of yout field control.
Method: EVALUATE_CONDITION_Z001
Here, you should be able to set a break-point for debugging.
BR
Matthias

Similar Messages

Query : Custom field at line item level in SRM 7.0 .

I was going through a document which instructs on how to add a custom field at line item level in SRM 7.0.
I found this code :
CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
EXPORTING
I_GUID = IV_DOC_GUID
I_WITH_ITEMDATA = 'X'
TABLES
E_ITEM = LT_ITEM
E_MESSAGES = LT_MESSAGES
E_STATUS = LT_STATUS. .
LOOP AT LT_STATUS INTO WA_STATUS.
IF WA_STATUS-STAT EQ 'I1015' AND WA_STATUS-INACT IS INITIAL.
LV_STATUS_APPROVE = 'X'.
ENDIF.
ENDLOOP.
I wanted to know what is 'I1015' and what is its significance .
please advise .
Ambar

HI
This speaks about the status of the Cart. This means that the Status of the Cart is AWAITING APPROVAL...I dont know which document you have gone through but procedure for adding a Custom Field in SRM 7.0 is:
1. Create a Custom field in the Database in SRM. Preferrably add the field in an include and extend thta include to the table in SE11.
2. Go to Portal Login of SRM and right click the part of the screen where you want to add the custom field. Click on More Field Help. The popup will give you the name of WebDynpro Applicaiton which controls that area.
3. Login to SRM via GUI and display the webdynpro application using SE80. Enhance the Webdynpro application.
4. Add the custom field to the Context of the WebDynpro Application View. You will be selecting the field from the database table while adding the custom field to the context
5. Add the field at the specified place in Layout Tab of the WebDynpro View,
6. Create a binding between the Layout Field and the Context
7. Activate the changes.... you will see the field in Portal login of SRM....
For more details , refer to the Webdynpro help of the application...
Regards
Virender Singh

Add customized fields in ME21N item overview.

Hi experts,
Can we insert our own customized fields into ME21N item overview section.
Pls advise.
Thanks and regards,
Simonksh.

hi,
Yes, you can do it with the help of ABAP consultant...
Pls check whether you are providing all links to the tables for that customised field...For this all coding is required to be done...
Also check:
MM06E005 - Customer fields in purchasing documents
Its an intensive work...
Hope it helps..
Regards
Priyanka.P

CIN: Items are not displayed while updating the RG1 Register using T Code:

Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
Chandra

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

Custom fields in PO item- displaying in ME23N only

Hi Friends,
This question has been asked lot of times in SDN and am forced to post the same question again coz i have not been able to fix my problem with those answers. My requirement isto add a tab in PO item level. I have followed the steps like
1. Creating a custom strucutres
2. Implementing the BADI and have written the logic inside SUBSCRIBE Method.
3. Have created a FM and have crreated teh screen.
4. Have implemented the BADI and have set the field status to '+' in FIELDSELECTION_ITEM method
I am still not able to see my custom tab in ME21N and ME22N but am able to see it in ME23N. If i change some value in ME22N then i am able to see the custom tab but not when you first open ME22N.
Can some one help me with this?
Thanks.

Hi,
Did you get answer to your post? coz i m facing the same problem.
Kindly revert if you have the solution.
Thanks.

Hide custom fields in checklist item depending on checklist type

Hi,
My requirement is that I want to hide some custom fields on a checklistitem depending on a checklist type.
Can this be done at configuration or programming level?
How can it be done?
Thanks

HI hemant vaidya ,
It may be possible to realize it via cProject field control functionality. You can define the condition using a so called schemata, and set the visible depend on the condition.
More details see note 947936
especially the section 'Create and use customer-specific conditions '
Kind regards,
Zhenbo

Need to add a custom field in ME23N item detail

Hi Experts,
I am new to SAP.
Got an issue to add custom field in ME23N transaction.
In item detail part , there is a tab called Retail
inside that tab i need to add new field..
is it possible to do?? if so kindly let me know..
Thanks in advance
Regards,
Annamalai.

Hi Brother,
[http://wiki.sdn.sap.com/wiki/display/ABAP/DetailedexplanationaboutBADIandthewaystofindtheBADIwithanexample%28ME23n+transaction%29]
As Rob told there are good threads available in SCN. Please check those. Check this link.
Given by Kiran.
Regards,
Madhu.
Edited by: madhurao123 on Jul 8, 2011 9:56 AM

Custom fields in PO item Overview

Hi Everyone,
I have a requirement which i need to display the custom fields in the Table Control(Item Overview) of PO. Since our Version is 4.6C there is no badi's avilable to do the changes. Please let me know how can we solve this problem.
Mentors: Forgive me if it is repeated Post...

Hi,
Search for user exit...either screen or field exit..this will solve your problem.
Small help on how to find a exit;
1. find out the package
2. go to se84 with the help of package in the cutom exit tab look for all the exit.
3.put the brek point and tack where you can get the solution.
Pooja

VA01- Custom field addition on item level (VBAP)

Hello Guys,
Requirement is to add custom field to Sales Order item level. I have appended a Z structure in VBAP table, and then added the fields in 8459 screen of SAPMV45A program in a frame.
Now the frame created is visible, but not the fields (label and text box). I have checked the code and the fields are not hidden in coding (Loop at screen).
I am able to use the transaction, without any problem after adding the fields in VBAP table and on screen 8459.
Please advise.
Regards,
Ashish

Hi read this.
Screen 8459 is embedded in a subscreen container on screen 4462 (SAPMV45A). I'm pretty confident that once you enlarge the subscreen area on 4462 (which I think is the best solution, alternatively you could enable scrolling) you should be able to see all your custom fields. Unfortunately this is a modification, so you need an access key for SAPMV45A.
This problem actually gave me some headache with a client, because the actually displayed fields were still fitting into the subscreen container. I.e. we had lots of fields (and rows), but most were dynamically hidden. However, it seemed that the compression of lines due to hidden fields was not happening before fitting the subscreen into the subscreen container and therefore certain fields got lost. Once I enlarged the corresponding container on 4462 everything worked fine.

Tabular Customer Fields - SC & Bid Invitation - Unable to display

Hi,
I am facing difficulty in displaying tabular customer fields for Shopping Cart and Bid Invitation. I have followed the steps given in the Consulting Note 672960.
I have added 3 fields for the append structures of INCL_EEW_PD_ITEM_CST, INCL_EEW_PD_ITEM_CST_SC & INCL_EEW_PD_ITEM_CST_BID.
Per Note 672960, Once the structures have been activated, the tabular customer fields will be displayed on the screen. But I am not able to see them under Shopping Cart Item level Basic Data Detail Screen as well as for Bid Invitation.
Any thoughts or Am I missing some steps here.
thanks, Ram P

The SAP Note also says the following:
=====
If you define fields for the first time, the system generates a screen for the display. If you create or delete fields, the screen must be regenerated. To do this, start report BBP_DYNPROS_GENERATE, change the proposed program to SAPLBBP_PDH_CUF and execute the report. Select the checkbox for the screens with the descriptions BBP_PDS_HCF for the table-like fields at the header and/or with the description BBP_PDS_ICF for the table-like fields at the item. You can use the 'Copy' button to enforce a regeneration of the screens.
=====
You may want to regenerate the screen according to the Report: BBP_DYNPROS_GENERATE.
But adding to Structure: INCL_EEW_PD_ITEM_CST_SC, INCL_EEW_PD_ITEM_CST_BID and INCL_EEW_PD_ITEM_CST should have worked if everything referencing these structures are compiled and activated correctly.
Hope that helps,
stirfry...today is 'tofu'

Custom fields in additional data B not displaying - Sales Order

Hi gurus,
I added some custom fields to the addtional data B tabstrip in sales order screen, but they didn't display. This is in the client's system. BUT in our own system it works perfectly. The screen has been activated.
Maybe it's because of the version difference?
Anyone experienced this before?
Any suggestion will be great.
Thanks

Resolved by myself.
For those who would have the same question, please refer to SAP note 386694.

SRM 7.0 -Adding Custom fields in Contract Item screen at particular positn

Hi,
We have a requirement to add new custom fields in the Contract Item screen at required position, in Left and right side container.
We have tried the following methods but have not been able to achieve the same. Kindly help!
1) Added new field in Context through enhancemnt in the Details screen View of Contract , Binded the field to the field in structure INCL_EEW_PD_ITEM_CSF_CTR and add the field to teh Layout - Using this method, The field is not saved to the table.
2) Added the field to meta data table /SAPSRM/V_MDF_IC - This is positionng the field on teh right container at the bottom. We want to position it on left side.
Kindly help to understand where we are going wrong.
Thanks in advance,
Regards
Prasuna.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

How can I add a Custom Field in Work Item "Bug" in VisualStudio Online agile MSF Template?

We are using Visual Studio Online for task and bug tracking. The problem we are facing is that very few fields are available to working with. We need to add custom fields to filter bugs on multiple attributes like OS, Device model, Verified in build etc.
We do not have local TFS server setup. The support questions i have read, they ask to update XML file for work item but i dont know how and where to get that xml file. Also is there any particular Role needed to access such configuration files?

hi Zahid
as already written above currently it is not possible to customize a process template on Visual Studio Online.
but for your purpose you can use tags to save the attributes.
see here Visual Studio Online - Work Item Tagging
Please use Mark as Answer if my post solved your problem and use Vote As Helpful if a post was useful.

Required item no: to populate custom field while creating item for a Sales order

Hello Experts,
I have created a custom field for item data of sales order using AET .
I want to populate this field automatically when ever we create a new item for a sales order using UI or CRMD_ORDER or WCEM by concatenation Sales order number and item number.
We are getting Item GUID but not getting the item number(need item number before getting saved is their any chance to get item number from item GUID ) to populate the field and save it.
For this we tried using BADI's
CRM_BTX_EXTENSIONS
CRM_ORDERADM_I_BADI
Thanks in advance,
Manasa Veena P.

Where did you add the field ?

Adding customer field into BID item Overview

Good afternoon,
(SRM 5.5)
I have added the customer field in the BID.
Is it possible to show it, in the "Item Overvier of BID"?
Alexey

Hi,
Generally through the INCL_EEW* structures,you can add the custom fields for the Bid Item only under the BASIC DATA tab.If you want to show up a field on the Item overview screen,then this will need std code modification(screen modification) or need to modify the HTML template for the BID item overview screen in the ITS service BBP_QUOT which will need lot of HTML expertise.
Hope this helps.
BR,
Disha.
Do reward points for useful answers.

Custom fields at checklist item to be displayed based on the checklist type

Similar Messages

Maybe you are looking for