Custom fields in PO item- displaying in ME23N only

Hi  Friends,
This question has been asked lot of times in SDN and am forced to post the same question again coz i have not been able to fix my problem with those answers. My requirement isto add a tab in PO item level. I have followed the steps like
1. Creating a custom strucutres
2. Implementing the BADI and have written the logic inside SUBSCRIBE Method.
3. Have created a FM and have crreated teh screen.
4. Have implemented the BADI and have set the field status to '+' in FIELDSELECTION_ITEM method
I am still not able to see my custom tab in ME21N and ME22N but am able to see it in ME23N. If i change some value in ME22N then i am able to see the custom tab but not when you first open ME22N.
Can some one help me with this?
Thanks.

Hi,
Did you get answer to your post? coz i m facing the same problem.
Kindly revert if you have the solution.
Thanks.

Similar Messages

  • Query : Custom field at line item level in SRM 7.0 .

    I was going through a document which instructs on how to add a custom field at line item level in SRM 7.0.
    I found this code :
    CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
    EXPORTING
    I_GUID = IV_DOC_GUID
    I_WITH_ITEMDATA = 'X'
    TABLES
    E_ITEM = LT_ITEM
    E_MESSAGES = LT_MESSAGES
    E_STATUS = LT_STATUS. . 
    LOOP AT LT_STATUS INTO WA_STATUS.
    IF WA_STATUS-STAT EQ 'I1015' AND WA_STATUS-INACT IS INITIAL.
    LV_STATUS_APPROVE = 'X'.
    ENDIF.
    ENDLOOP.
    I wanted to know what is 'I1015'  and what is its significance .
    please advise .
    Ambar

    HI
    This speaks about the status of the Cart. This means that the Status of the Cart is AWAITING APPROVAL...I dont know which document you have gone through but procedure for adding a Custom Field in SRM 7.0 is:
    1. Create a Custom field in the Database in SRM. Preferrably add the field in an include and extend thta include to the table in SE11.
    2. Go to Portal Login of SRM and right click the part of the screen where you want to add the custom field. Click on More Field Help. The popup will give you the name of WebDynpro Applicaiton which controls that area.
    3. Login to SRM via GUI and display the webdynpro application using SE80. Enhance the Webdynpro application.
    4. Add the custom field to the Context of the WebDynpro Application View. You will be selecting the field from the database table while adding the custom field to the context
    5. Add the field at the specified place in Layout Tab of the WebDynpro View,
    6. Create a binding between the Layout Field and the Context
    7. Activate the changes.... you will see the field in Portal login of SRM....
    For more details , refer to the Webdynpro help of the application...
    Regards
    Virender Singh

  • How to make the custom field enable/disable in ME21n/ME22n/ME23n trans

    Hi Experts,
    I need help.
    I have created one custom field in the transaction ME21n/ME22n/ME23n under customer data 2 tab. But my problem is the field is always in enable (means editable only)  even in Display mode. How to make the field is non editable in display mode and editable in change mode.
    I have tried by putting some logic to make that field to change alternatively according to change/display button. And it is working fine but if we click any othe button , this field is becoming editable even in display mode.
    How to make this field to behave as standard fields?
    Please reply me <removed by moderator>
    Thank you in advance.
    Best Regards,
    Divakar.
    Edited by: Thomas Zloch on Mar 2, 2012

    If you have BADI implimented for custom tabs then you can do this in method ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM
    lv_changeable = im_header->is_changeable( ).
      LOOP AT ch_fieldselection ASSIGNING <fs>
        IF lv_changeable IS INITIAL.
          <fs>-fieldstatus = '*'. " Display
        ELSE.
          <fs>-fieldstatus = '+'. " Change
        ENDIF.
    endloop.

  • Additional fields for line item display for Vendor Accounts

    Hi,
    The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
    Could you help me to know how the same will be displayed in ECC 6.0 system.
    Thanks

    In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
    When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
    Thanks

  • Define Additional Fields for Line Item Display

    Dear gurus,
    I'd like to ask for your help again, please. I've just added the field BKPF-USNAM to the list of fields of FBL1N using IMG:" Financial Accounting-> Accounts Receivable and Accounts Payable->Vendor Accounts->Line Items-> Display Line Items->Define Additional Fields for Line Item Display". When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
    Is there another transaction that I must set new columns to FBL1N.
    Thank you very much.
    Paresh Jivani
    Edited by: Jivani Paresh on Jul 31, 2009 9:16 AM

    Hii,
    When you will execute FBL1N, it will come up in standard format. if you want to see any specific fields,then you have to go to Change Layout button and choose from available fields as per your requirement and then execute.
    For future reference, you can save this layout as a Variant and then you can directly execute that report using that variant.
    Dhara D.

  • Add customized fields in ME21N item overview.

    Hi experts,
    Can we insert our own customized fields into ME21N item overview section.
    Pls advise.
    Thanks and regards,
    Simonksh.

    hi,
    Yes, you can do it with the help of ABAP consultant...
    Pls check whether you are providing all links to the tables for that customised field...For this all coding is required to be done...
    Also check:
    MM06E005 - Customer fields in purchasing documents
    Its an intensive work...
    Hope it helps..
    Regards
    Priyanka.P

  • Custom fields at checklist item to be displayed based on the checklist type

    Hello,
    We have developed custom fields at the checklist item level. Now we want these fields to be displayed on the basis of the checklist type. 
    We have explored the notes 931274 and 942672 and based on these we have created the new condition Z001. Following these notes, we have created the schema Z_EVAL_CONDS_Z001 in SE38. However, we are not able to set breakpoints in the schema and / or debug the same. Hence, we are unable to write the required logic for filtering the fields based on checklist type.
    Any help in this area will be appreciated.
    Regards,
    Abraham.

    Hi Abraham,
    You can find the generated method in class: /1CPR/CL_XXX_YYY_ITO, where:
      - XXX is your client number.
      - YYY the name of yout field control.
    Method: EVALUATE_CONDITION_Z001
    Here, you should be able to set a break-point for debugging.
    BR
    Matthias

  • What User Exit can I use to add a cust field to PO Item overview in ME23n?

    Hi,
    I need help!
    Does anyone have any examples of adding a new cust field to PO Item Detail screen with a user exit?
    In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
    Which user exit I can use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
    We are on release SAP ERP Central Component 5.0

    Hi,
    Thank you for the response.  I tried this and found  Badi ME_PROCESS_PO_CUST.  Do you have any examples of adding a new cust field to PO Item overview screen using badi ME_PROCESS_PO_CUST? I have had little experience creating badi's, and would appreciate very much some sample code if possible.
    In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
    Can you tell me if method FIELDSELECTION_ITEM of badi ME_PROCESS_PO_CUST the correct one to use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
    Thank you for help - much appreciated,
    Vicki

  • Custom fields in PO item Overview

    Hi Everyone,
    I have a requirement which i need to display the custom fields in the Table Control(Item Overview) of PO. Since our Version is 4.6C there is no badi's avilable to do the changes. Please let me know how can we solve this problem.
    Mentors: Forgive me if it is repeated Post...

    Hi,
    Search for user exit...either screen or field exit..this will solve your problem.
    Small help on how to find a exit;
    1. find out the package
    2. go to se84 with the help of package in the cutom exit tab look for all the exit.
    3.put the brek point and tack where you can get the solution.
    Pooja

  • Z field in open item display

    Hi,
    in F-04 screen , we have a Z field called BankRef No. while uploading customer open item, we use this field. while showing the customer open item display, this Z field is not shown. the requirement is to see this field in the customer open item display while taking incoming payment. is there any way to do this or add Z field in standard template for view?
    Thanks,
    Binita

    Hi
    You need to append the Tables, BSEG, BSID and BSAK with these fields. There after, add these fields for display in Open Item Processing selection parameters. Than you will be able to see the Z Field in F-04
    Regards
    Sanil Bhandari

  • VA01- Custom field addition on item level (VBAP)

    Hello Guys,
    Requirement is to add custom field to Sales Order item level. I have appended a Z structure in VBAP table, and then added the fields in 8459 screen of SAPMV45A program in a frame.
    Now the frame created is visible, but not the fields (label and text box). I have checked the code and the fields are not hidden in coding (Loop at screen).
    I am able to use the transaction, without any problem after adding the fields in VBAP table and on screen 8459.
    Please advise.
    Regards,
    Ashish

    Hi read this.
    Screen 8459 is embedded in a subscreen container on screen 4462 (SAPMV45A). I'm pretty confident that once you enlarge the subscreen area on 4462 (which I think is the best solution, alternatively you could enable scrolling) you should be able to see all your custom fields. Unfortunately this is a modification, so you need an access key for SAPMV45A.
    This problem actually gave me some headache with a client, because the actually displayed fields were still fitting into the subscreen container. I.e. we had lots of fields (and rows), but most were dynamically hidden. However, it seemed that the compression of lines due to hidden fields was not happening before fitting the subscreen into the subscreen container and therefore certain fields got lost. Once I enlarged the corresponding container on 4462 everything worked fine.

  • SRM 7.0 -Adding Custom fields in Contract Item screen at particular positn

    Hi,
    We have a requirement to add new custom fields in the Contract Item screen at required position, in Left and right side container.
    We have tried the following methods but have not been able to achieve the same. Kindly help!
    1) Added new field in Context through enhancemnt in the Details screen View of Contract , Binded the field to the field in structure INCL_EEW_PD_ITEM_CSF_CTR and add the field to teh Layout - Using this method, The field is not saved to the table.
    2) Added the field to meta data table /SAPSRM/V_MDF_IC - This is positionng the field on teh right container at the bottom. We want to position it on left side.
    Kindly help to understand where we are going wrong.
    Thanks in advance,
    Regards
    Prasuna.

    Hi Prasuna,
    Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
    If you do this, are you able to view the new fields on the screen?
    you mentioned that you are not able to save the data to the table.
    Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
    Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
    Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
    Regards
    Lavanya
    Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

  • How can I add a Custom Field in Work Item "Bug" in VisualStudio Online agile MSF Template?

    We are using Visual Studio Online for task and bug tracking. The problem we are facing is that very few fields are available to working with. We need to add custom fields to filter bugs on multiple attributes like OS, Device model, Verified in build etc.
    We do not have local TFS server setup. The support questions i have read, they ask to update XML file for work item but i dont know how and where to get that xml file. Also is there any particular Role needed to access such configuration files?

    hi Zahid
    as already written above currently it is not possible to customize a process template on Visual Studio Online.
    but for your purpose you can use tags to save the attributes.
    see here Visual Studio Online - Work Item Tagging
    Please use Mark as Answer if my post solved your problem and use Vote As Helpful if a post was useful.

  • Required item no: to populate custom field while creating item for a Sales order

    Hello Experts,
    I have created a custom field for item data of sales order using AET .
    I want to populate this field automatically when ever we create a new item for a sales order using UI or CRMD_ORDER or WCEM by concatenation Sales order number and item number.
    We are getting Item GUID but not getting the item number(need item number before getting saved is their any chance to get item number from item GUID ) to populate the field and save it.
    For this we tried using BADI's
    CRM_BTX_EXTENSIONS
    CRM_ORDERADM_I_BADI
    Thanks in advance,
    Manasa Veena P.

    Where did you add the field ?

  • Adding customer field into  BID item Overview

    Good afternoon,
    (SRM 5.5)
    I have added the customer field in the BID.
    Is it possible to show it, in the "Item Overvier of BID"?
    Alexey

    Hi,
    Generally through the INCL_EEW* structures,you can add the custom fields for the Bid Item only under the BASIC DATA tab.If you want to show up a field on the Item overview screen,then this will need std code modification(screen modification) or  need to  modify the HTML template for the BID item overview screen in the ITS service BBP_QUOT which will need lot of HTML expertise.
    Hope this helps.
    BR,
    Disha.
    Do reward points for  useful answers.

Maybe you are looking for