Custom fields in Report painter in CCSS table

Hello Experts,
I am in a processes of developing a report painter with custom fields in the selection screen.
The custom fields are available in PRPS table.
With hard difficulties I brought the custom fields in selection screen of the report painter.
I have added the fields in the structure CI_CC1S
Everything is fine. But if I enter a value in the custom field, the report is not fetching any data.
These custom fields are related to the WBS element.
For example if the value of the CUSTOM field is 'AAA', then I want to retrieve ony the WBS element which has 'AAA'.
Somewhere I am missing a procedure.
Could anyone suggest how to achieve this.
Thanks !!!
Best Regards,
Vasanth M

Any Suggestions

Similar Messages

Create Report Painter using LIS table

Hi Expert,
I'n new in ECC version but I found we can create report painter using LIS table,
but I'm not success to create report without error or debug
Anybody have the documentation about it ? or tell me how it works ...
Please ..urgent...need to tell client about it..
Thanks

Hi,
I have not worked on it but you can try this out:
TCODE for report writer table is GRCT.
There You need to add your z fields in some pre-defined structure like CCSS and then activate the structure and then activate characteristics.
NOTE: 24 charcter is max. length for the characteristics.
Regards,
Harsh.

How to add new fields in report painter without library

Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhan

hi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest

Settinf selection fields in Report painter

hi,
i need to know how to select fields in report painter as selection fields or input fields?
i just have an idea of library where we select fields.
but how to select selection screen fields?

hiiii
refer to following link..it will help you for report painter
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
regards
twinkal

Creation of Library and Report in Report Painter with Z tables.

HI,
When I am creating library in report painter with Z table it is giving the following error message 'Table ZCO_SEMI_FIN_VAL is not installed in Report Writer'.
Can u help me how u install Z table in report painter and create the characteristic and key figure of the Z table in the library.
Regards,
Partha B

Hi Partha Pratim Bhar,
In order to bring / enable a Z table for you to build a library, you will have to set it at transaction GRCT.
Here you need to configure - table (Z table) , characteristics and Key figures.
You can refer any other tables by SAP in GRCT for reference.
Revert if you require additional help.
Regards,
Subin John

Read Purchase data using Report painter with CCSS structure

Hi
I'm triying to set-up a simple Budget by material procedure using Rosurces defined as material and KP06 to plan Qty and Values.
All works fine.
Later I need to write a report for Compare Planned vaues and Effective values at material (resource) level.
Unfortunately resource can be used only for planning, so none Effective values is available in CO.
I thought to write a Report using Report painter and library 1VK (CCSS structure) for planned values and import from a LIS table the effective values (Ordered, Invoiced) directly from Puirchasing environment.
Is it possible by using exit or other tools, import LIS data into a CO Report painter program ???
Thanks in advanec for your help.
Claudio

Hi
I try to specify better my need.
I've defined using report painter a Z report using Report Painter.
Inside teh new Report, I can use a Customer key-figure which does'nt exist in the CCSS structure.
Is there any solution to Read data from other SAP tables and use these info into the report.
I'm not very frioendly with Set, Key-figures and variables, and I'd like to undestand if my needs can be solved using Report-painter.
Thanks for your help.
Claudio

Maximum size to reference text fields in report painter

I have created a library for report painter but reference text fields were not transfered because of their size exceed 24 character long. is there some SAP procedure to extend this size at the moment we are creating the library? Thanks in advance for support me.

Hi Francisco
Firstable I created a structure evaluation using SAP TC MCS7 and took the own customized table that was set up for SPL porpuses. this table contains several fields including text fields and now we would like to take them for set up several report painter but I noticed that this kind of fields are not available when I created the library using GR21 also when I tried to create the set using GS01 appeared a error "this field is bigger than 24 characters" or something like that.
SGTXT              Text Field                      50
ZZBKTXT          Text Head Reference      25
ZZKIDNO          Payment Reference        30
Thanks in advance to take time for my research.
Regards

Object Indicator field in Report painter

we are looking for some field details in RWCOOM table like object indicator. There is object indicator field name in CCSS table. We want to ignore planned cost of service orders from the project planned cost as there is already planing of cost at project level. The same cost element is used for cost planning in Project builder and service order
Please provide us some option where we can restrict planned cost of the
orders other than network to show in project reports.
Thanks & Regards,
Ranjan

In general data selection, i have already cost center, but it is not apprearing at selection screen. Only three field are appearing (Year + Period + Forecast), and i want to add cost center at the selection screen. How to make cost center field at selection field from General data selection option. Please guide me
Thank in stack
Nilesh Shete

Need to add custom fields in Report RM06EN00 ( Tcode ME2N ) in the Output

Hi,
MY requirement is i need to add 10 custom fields in the standard program RM06EN00 whos tcode is ME2N.
i have appended the fields in the EKKO table and they r now available in the dynamic selection screen of the report RM06EN00.
But i need to display this fields in the output and these fields should also be available in the change layout of the ALV report which is displayed when u click on the change button after pointing the cursor on the PO number.
I am looking out for any enhacement though which this requirement can be met. however my second option is to copy the standard report to a z program and modify it. but i think it will not going to be east and it may take a lot of time..
Need both advice and answers for this soon.
Thanks in advance.
Best Regards,
Fardeen

If you have want to add fields in Field catalog from se11 Add fields in this structure MEREP_OUTTAB_PURCHDOC using append structure and activate and execute ME2N with BEST_ALV IN SCOPE LIST U WILL find in change layout.

Adding field in Report Painter

Hello Gurus,
I am working in the Report Painter PR20-001.
My requirement is to add a new column in the output of the report but even when i am able to add a new field and save it on the reports execution i am unable to view the added field in the output.
Kindly tell me the entire procedure to add a new field in the output of the respective report painter output.
Regards,
Swati.

Hi,
Go to Global Parameters Definitaion in report painter, variable will be used only along with the field, just in global paramerters enter your desired field and click in next column, system will show you a pop up select your variable for that field...
now its just done run the report and test it!
If you still not make it refer to standard report of such kind, you will surely get it....
Regards,
Sayujya

Add Custom fields in Report Incident Screen in EHSM

Hello experts,
I want to add custom fields like Notification No. and division in Report Incident screen in EHSM.
I have added two fields.
Business Object: EHHSS_INCIDENT
Node: BASIC_INFO_ALL
Structure: INCL_EEW_EHHSS_INC_BINFA_D (added two fields using append structure)
Now how can i link with my screen and how to fetch notification data (standard F4 help)?
and when i save data, where it will save?
Can you guide me with proper steps for it as i am new in it.
Thanks in advance.

Hi Jayvin,
To add the above fields on the screen, open the component configuration of the required screen.
Enhance the same and add the fields from the respective Node.
You did not worry about saving the data, once the fields are placed on the screen it will get save on click of save/ on event of save.
Regards,
Sanket.

How to add Custom code in Report Painter

Hi All,
I have a requirement to add Authorization checks at Profit Center Level for 8A-PCA001G report. This is the first time am working on Report Painter/Writer. I am wondering whether i can add custom code or not. Please suggest me how to do this. I copied 8A-PCA001G into a zreport but did not find anywhere to add custom code.
Any help would be really appreciated.
Thanks,
Kumar

Hi Kumar,
You cannot write custom code (0% coding) in an Report Writer/Painter report. The code is generated by SAP while generating the Report group. The only place in a report writer report where you can write very minimal code is at varables level or formulas inside reports.
At the report group header level, there is provision to provide authorization group. Try that.
Regards,
Subin John.
Edited by: subin john on Mar 24, 2011 10:36 AM

Selection Field in Report Painter Report

Dear All,
Could any one tell me the procedure to add new field at selection screen for the report painter report ? To change the report painter selection screen i have to change the Report group or Report of the report group?
Thank in stack

In general data selection, i have already cost center, but it is not apprearing at selection screen. Only three field are appearing (Year + Period + Forecast), and i want to add cost center at the selection screen. How to make cost center field at selection field from General data selection option. Please guide me
Thank in stack
Nilesh Shete

Remove fields from report painter

Hi,
I try to create a z transaction code for my report which was built using the report painter tool. I got additional fields like read mode, print report and rebuild frozen report data on the selection screen. How can I remove these fields to make the selection screen identical to the one when executing in report painter tool? Please help!
Thanks,
Chuong

Hi,
You can change the transaction type:
Goto SE93 --> Click Change --> In menu bar click on Edit --> Change Transaction type --> Select program and selection screen (Report Transaction) radio button and Save.
Also make sure that you have selected all the GUI support check box.
Activate the transaction and execute.
Hope this may work..
Regards,
Prashant

Service Reuqest Custom Fields on Reports

Hi,
I Added 3 new custom fields of type "Integer" to Service Reuqest.
Now, when I come to combine them in an analysis (Going to Reports -> Design Analysis -> under REPORTING choosing "Service Reuqests" I can't see these fields, when looking in "Service Request Custom Feilds".
When I added custom fields to PRODUCT I didn't run into this issue.
Is it possible that in Service Reuqest reports I can create analysis based only on indexed fields of the serivce requests?
Or did I do something wrong?
What do I have to do in order to use fields I am adding in analysis?
Thanks!
Guy

Guy,
Check under Service Request metrics at the bottom, I often find number or percent custom fields hide down the bottom.
cheers
Alex

Custom fields in Report painter in CCSS table

Similar Messages

Maybe you are looking for