Custom fields in SRM 7.0

Hi all,
Im working on SRM 7.0.I need to add few custom fields in SC and PO screen at header level.I have worked on similar requirement in SRM 5.0 but not on SRM 7.0.Can anybody explain what are the differences in the proceudre for addition of custom fields in SC and PO screens?
Also any notes which explain the procedure would be really useful.
Thanks in advance!
Regards,
SRM tech

I want to add one new customer field for the PO (ITEM)  to the existing 10 Item
I did everything as written in the pdf document
1) correct structures
INCL_EEW_PD_ITEM_CSF_PO,
INCL_EEW_PD_ITEM_CSF
INCL_EEW_PD_ITEM_CSF_SC.
2) configured in spro "Define Customer Fields on Item Level" and
Configure Control for Fields on Item Level
but my changes(new feld ) do not appear on the screen wEB DYNPRO, only in the table BBP_PDISC.
questions : may have a restriction on the number of customer fields in web dynpro?

Similar Messages

  • Adding Custom fields to SRM Item Data tab & Account Assignment Tab

    Hi Everyone,
    We have got a small requirement to add 2 custom fields in SRM Shopping cart.
    Need to add a input field, which should act just like Requisitioner in ECC. ( F4 help ).This will allow to create shopping cart on behalf of some one.
    Need to add input field, which resembles Goods Recipient in ECC ( Free text)
    After adding custom fields, how do i ensure that, it's mapped to right field in ECC.I spent much browsing SRM forum, but couldn't gather much information. I understood that, this involves configuration in SPRO.
    Any information or help in any kind would be really helpful.
    Thanks in advance.
    Vishnu

    Hi Vishnu,
    Take look at this link.
    Add custom field to SC and POWL
    Thanks
    Senthil

  • How to add custom field in SRM-MDM catalog

    Hi Guys,
    I have to add a custom field in SRM-MDM catalog. I know, it is done through MDM console, but how, it is done, This, I don't know.
    Please help me.
    Thanks in advance!!
    Note-> we are at SRM5.0 + MDM2.0
    Neelesh

    Please check the online help.
    [http://help.sap.com/saphelp_mdm550/helpdata/en/6c/24e342f6307176e10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_mdm550/helpdata/en/6c/24e342f6307176e10000000a1550b0/frameset.htm]
    Regards,
    Masa

  • Creating Customer fields in SRM 5.0

    Hey everyone,
    i need to create 3 Customer Fields in SRM 5.0 in the Shopping Cart. The Fields are to be showen in Cost assigment.
    I allready did the Append Structures from SAP NOTE 672960 and my Fields are showen in the SC, unfortinaly not where i want them to be the are displayed in the Shopping Cart Info.
    In Badi  BBP_CUF_BADI_2 i tried changing the et_fields-structure_type to ACC but that didnt help.
    Does anyone have an Idea or an Answer on how to postion the Customer Fields correctly?
    And how do i change the Fields Info Text so the Field and the Headline of the Field are close to each other?
    Thanks for all answers.
    Tobias
    Edited by: Tobias on Aug 24, 2010 3:45 PM

    Hello Virender,
    thanks for the answer, everything works so far.
    I just have one more little problem. When ever the Requester selects a special Produktcategory in the SC the field Cost assigment has to be changed to  ASSET. This i did in DOC_CHANGE_BADI , where i set the et_account value from CC to AS.
    Then in the Shopping cart i see the cost assigment i wanted "ASSET" But now i get an Error Message that the Produktcategorie cant be booked to Cost Center ?!?! I tried debugging the Error and found the Message ID BBP_PD MESSAGE 047 and 822
    Do you have any Idea why i get this Messages even though i have the right Values in ET_ACCOUNT.
    Thanks Tobias

  • Custom Fields from SRM 7.0 to R/3 4.7

    Hi,
    I have some custom field which need to be passed from the SRM confimation to R/3 - GR, I learnt that Idoc MBGMCR01 is triggered to create the GR in R/3.
    1. Wether I have to create a new IDOC type and assign in the message type? Please let me know in which BADI i can populate the value for the custom Fields
    Edited by: prabhu jayaraman on Oct 5, 2009 3:38 AM

    Hello Prabhu,
    You need not create a new idoc. You can extend the existing Idoc using extensions.
    However in the related FM BBP_ALE_GOODSMVT_CREATE which triggers the Idoc , i do not see any BADI being called.
    Best Regards,
    Pavan
    Edited by: pavancv on Nov 18, 2009 4:13 PM

  • Custom field in SRM as a dropdown field with values stored in R/3

    Hi all,
    I need help with custom drop-down field in SRM 5.0 shopping cart. We need to create custom field called Location in SRM goods receipt transaction. And this location field will be a drop-down field that will be filled with values from locations stored in R/3. I would really appreciate if someone can help me achieve this.
    Regds,
    Kim

    Hi,
       Just attach a  custom search help to this field and then in the search help EXIT(RFC enabled Function module) write the logic to reterive the values from R/3.
    BR,
    Disha.
    Pls reward points for useful answers.

  • How to replicate data from custom field in SRM to ECC

    Hi,
    I am using SRM 5.0, as per my requirement i need to get data from SRM (Web GUI) through custom fields in "Confirm Goods",
    and need to pass this data to ECC,
    I found that Message type MBGMCR; IDOC Type u2013 MBGMCR01 can be used for passing the data from SRM to ECC,
    How can i pass the new data to this IDOC in SRM
    and how can i get the data from this IDOC in ECC
    Please help.
    Thanks in advance,
    Jerin.
    Edited by: Jerin Joseph on Jul 23, 2009 5:06 PM

    Hello,
    This will help you.
    Re: Replicating GR custom fields from EBP to SAP R/3
    Thanks
    Ashutosh

  • Custom fields from SRM PO to R/3 - missing values

    Hi,
    As part of the extended classic scenario  when the PO is being transferred to backend we are sending couple of custom fields ( added to append structure  CI_EKPODB in EKPO table )  in the item table .
    We are doing this for ECC 6.0 and 4.7 backend versions.
    ECC 6.0 works fine i.e, the custom fields gets properly replicated ( updated in EKPO table )
    4.7 --> It doesn't work.
    In R/3 we have maintained the correct mapping in BBP_CUFMAP table.
    Any ideas what is the issue with 4.7 version.
    Note : SRM uses BAPI " BBP_PO_INBOUND"  FM in R/3 to replicate
    Thanks,
    Krishna.

    Hi Kumar,
    Sorry for the late reply. I have the solution for this question.
    For copying the custom fields code is to be written in the BADI "BBP_ECS_PO_OUT_BADI", method "BBP_B46B_PO_OUTBOUND". This BADI has both ECC PO fields and all the SRM fields(including the custom fields added in PO and SC) in separate structures.IS_HEADER, IT_ITEM etc has all the SRM PO values. CS_BAPI_POHEADER, CT_BAPI_POITEM etc has ECC PO values.
    There are two function modules, BBP_PD_PO_TRANSFER_EXEC and BBP_PD_PO_TRANSFER_EXEC_V2. Execute these function modules with the GUID for PO after PO change or create in SRM system. Once the FM is executed the BADI will be triggered and the additional functionality carried out and PO replication from SRM to ECC happens.
    Hope this helps you. Please let me know if you need any more information.
    Thanks,
    Deepthi

  • Copying custom fields from SRM PO to ECC PO standard fields

    Hi All,
    There are three custom fields which are added in SRM SC and PO at item level. My requirement is to map these three custom fields to three standard fields in ECC PO. Can any one please explain me, how the replication of SRM PO to ECC PO happens? I could find a function module "B470_PO_CREATE". Can any one tell me through which transaction or program this FM will be triggered.
    Any useful answer will be rewarded
    Thanks,
    Deepthi

    Hi Kumar,
    Sorry for the late reply. I have the solution for this question.
    For copying the custom fields code is to be written in the BADI "BBP_ECS_PO_OUT_BADI", method "BBP_B46B_PO_OUTBOUND". This BADI has both ECC PO fields and all the SRM fields(including the custom fields added in PO and SC) in separate structures.IS_HEADER, IT_ITEM etc has all the SRM PO values. CS_BAPI_POHEADER, CT_BAPI_POITEM etc has ECC PO values.
    There are two function modules, BBP_PD_PO_TRANSFER_EXEC and BBP_PD_PO_TRANSFER_EXEC_V2. Execute these function modules with the GUID for PO after PO change or create in SRM system. Once the FM is executed the BADI will be triggered and the additional functionality carried out and PO replication from SRM to ECC happens.
    Hope this helps you. Please let me know if you need any more information.
    Thanks,
    Deepthi

  • Disable custom field in SRM SUS in PO / POR item level

    HI all,
    We are using SRM 5.0, ECC6.0 and ECS scenario.
    We have a requirement where a custom field in SUS portal has to be disabled for a certain condition.
    I have checked for BADIs which could help me achieve this but none are available.
    BADIs such as CUF BADI are not getting called while navigating through SUS PO and POR.
    Please let us know if there are other ways through which we can achieve this.
    Regards
    Kishan

    Hi,
    I use SRM 7.0 i don't know if in 5.0 is equal, but what i would do in 7.0 is;
    Add the custom fields in the view /SAPSRM/V_MDF_IC for itmes or /SAPSRM/V_MDF_HC for header.
    In this view you can inform a dynamic class and method for do it.
    In this method you have a parameter named CS_METADATA you have the following field for do it;
    VISIBLE
    ENABLED
    REQUIRED
    I hope it will be useful

  • Table Extension custom fields in SRM 7.0

    Hi SRM Experts,
    I'm struggling with adding data into a table extension that I created on Confirmations. (SRM 7.0)
    I followed the suggested steps to add a table extension:
    1) SPRO->SAP SRM->SRM Server->Cross-Application Basic Settings->Extensions and Field Control (Personalization) -> Create Table Extensions and Supply with Data -> Define Customer Table Extensions on Item Level.
    2) I created the two structures (INCL_EEW_PD_HEADER_CST and INCL_EEW_PD_HEADER_CST_CONF) and added the custom fields.
    3) I set the visibility of the table extension and created the entries with TICUS.
    4) I configured control of fields of table extensions.
    5) I configured control of actions for adding a row (ADD_TICUS)
    6) I added the custom fields in SM30 to table /SAPSRM/V_MDFSBC_DEFAULT
    The table extension is visible on the Confirmation screen but the custom fields are not editable and I'm not able to fill in data into them.
    When I click on the add row button, a row is added to the table but the fields are still uneditable.
    I need to populate this table extension with some data before it gets displayed to the user, and then the user needs to complete the empty custom fields.
    I tried to add data to BBP_PDICF, but it still does not appear in the table extension.
    Please can someone give me some guidence?
    Regards,
    Andrew

    Hey Andrew,
    Please let me know how you rectified the issue?
    Are these the steps to be followed? Even I need to add  a table in the header level of PO document.
    Please share your experience.
    Kind Regards,
    Gayathri

  • Adding custom fields to SRM UI Add-on

    Dear SAP Experts,
    We enabled SRM UI and followed the SAP provided configuration guide to complete all the required setup's. we are able to create shopping cart using the new UI without any issues.
    Now we are trying to enable custom fields on new SRM UI which are currently available on Web dynpro SC UI. we followed the configuration steps (2.1 Extending screens via SPRO configurations) provided in the Extensibility-Customer_CookBook_SP04_1.pdf.
    After the configuration is completed, we are able to see the new custom fields on the new UI screen, but we are not seeing the description as expected - the description is shown as VIEWKEY_FieldName_L eventhough we maintained the label text.
    And also any data that is entered in the new custom fields are not saved to database and therefore not available in BBP_PD transaction.
    Please see the attached screenshot for more details.Please provide your guidance in resolving the issue.
    SRM UI Add-on Extensibility cook book is available as an attachment to the note: 1830075 - Extensibility Cookbook (Customer Fields)
    Thank you and appreciate your quick response.
    Regards
    Venkat

    Venkat, We are trying to enhance the UI5 Shopping Cart using Extensibility-Customer_CookBook_SP04_1.pdf but I don't see the fields showing up in UI5 shopping cart and below are the steps that I followed.
    I am trying to add Location field in SRMShoppingCartItem (2nd row in below screen shot)
    I enhanced the Staging Structure (/SRMNXP/S_CUST_ITEM_LIST) , Customer Include (​INCL_EEW_PD_ITEM_CSF_SC) & Cust-MD Structure (/SRMNXP/S_ITEM_UI_MET_CUST) and went to SPRO and did this config for adding fields to UI screen.
    SAP Supplier Relationship Management---->SAP SRM User Interface Add-on---->Extension and Field Controls---->Configuration for Extension of Fields
    I didn't add column to database and Odata Service Model. My Goal is to show Location Field first on the  SRMShoppingCartItem and then want to enhance Database & OdataModel.
    Below are the Steps I followed.
    1) Enhanced Staging Structure :  /SRMNXP/S_CUST_ITEM_LIST
    Appended the Component Type : ZCUSTITEMLIST with Field ZLOCATION of Type Char20
    2) Enhanced  Customer Include ​INCL_EEW_PD_ITEM_CSF_SC
    Appended the Component Type : ZAINCL_EEW_PD_ITEM_CSF_SC with Field ZLOCATION of Type Char20
    3) Enhanced Cust-MD Structure  /SRMNXP/S_ITEM_UI_MET_CUST
    Appended the Component Type : ZITEMUIMETCUST with Field ​ZLOCATION_V, ZLOCATION_E, ZLOCATION_R of Type XFELD
    4)  SPRO
      SAP Supplier Relationship Management---->SAP SRM User Interface Add-on---->Extension and Field Controls---->Configuration for Extension of Fields
    Added this new entry:
    But I don't see this Location field  showing up in the UI5 Shopping Cart. Please let me know if I am missing any thing in Configuration.
    If possible can you provide the steps that you followed.
    Thanks,
    Venu.

  • Adding Custom fields to SRM 5.0 & placing them in the portal (SC)

    Hi,
    I am having some trouble with adding custom fields to the SRM 5.0 portal Shopping Cart.
    I know that in order to have the custom fields appear, you first need to add them to the INCL_EEW_PD_ITEM_CSF & INCL_EEW_PD_ITEM_CSF_SC tables.
    However, how do you control where the fields appear in the SC portal? I know that BADI bbp_cuf_badi_2 exists, but it doesn't allow you to place the fields where you want them to appear. Can you use screen variants for custom fields?
    Please help.
    Thanks You.

    Bump!

  • Custom Fields in SRM 7.0 upgrade

    Hi all,
       We are doing upgrade from SRM 5.0 to SRM 7.0. In SRM 5.0 we have lots of custom fields in Shopping cart, Bid Invitation & Vendor quotation screens. But those fields are not being displayed in SRM 7.0 screen. What are all the changes needs to be done? Can somebody throw light on this?
    Regards,
    Prasanna.

    Hi
    As you have all those fields extended to SRM tables, so that part is not required to be re developed in your case. The only remaining thing is enhance the WebDynpro Elements and include those fields in the Webdynpro as follows:
    1. Add these custom fields to header or item levels in IMG--> Supplier relationship management --> Cross application basic settings --> Extensions and Field COntrol --> Configure Field Control --> Configure Field Control at Header Level/Item Level.
    2. Find the WebDynpro Component by Clicking right on the section of the screen where you want this field to be added.
    3. Enhance the webdynpro application to add the field in Context view of the Webdynpro View.
    4. Add the field in Layout of the Webdynpro View and bind the field in layout with Context of the respective field.....and activate the Webdynpro enhancement
    Refer to Service Marketplace for more details about the same
    Regards
    Virender Singh

  • Need to provide F4 functionality to customer field on SRM Screen

    Hi all,
    I was created 4 input fields on SRM WEB screen. I need to provide F4 functionality for the first field.if user clicks on the find button it has to show list of all values related to the above mentiones 4 fields. in this four fields one field is the key field. if user select on key field the corresponding values has to be populated in the reamining 3 fields along with the key field.
    how to achive this. is there any badi for this.pls suggest me the sample code if any thing is  there.

    Hello,
    If you are using custommer fields according to notes 672960 and 458591, the F4 option are self-generated when defining in the include (CI* or INCL_EEW_PD* ) a foreign key or a search help.
    Rgds,
    Pierre

Maybe you are looking for