Custom Fields not being displayed.

Hi Experts,
I have recently done a EEWB enhancement and also CRMV_SSC configuration to enable display of a custom field for my support notifications.
However these custom fields are not appearing. This looks like an issue with the configuration in CRMV_SSC, however I am not sure of how find the Screen Panel and Profile to confirm the changes in this.
Would like to know if any of you have faced similar issue or if you have any idea about the configuration of EEWB changes in CRMV_SSC.
Thanks,
Aditya

Hi Stephane,
Thanks for the blog, however I had already gone through that.
I figured out the problem - our configuration was a little different. Instead of using the screen profile - SRV_SLFN_1, we were using the screen profile - SRV_SLFN_2.
I found this by checking CRMV_SSC, Scrn Profile select. option - here the associated screen profile and transaction type were given.
Thanks for the help.
Regards,
Aditya

Similar Messages

Custom field not getting displayed in SUS PO item level

HI all,
We are using SRM 5.0, ECC6.0 and ECS scenario.
As per SAP note 762984, we have enhanced the structures such as :
INCL_EEW_PD_ITEM_CSF_SUSPO
INCL_EEW_PD_ITEM_CSF
and have added a record in the following place in SPRO:
Supplier Relationship management-> Supplier self service->Make field control settings for tables.
| Item | Display | Z.PO.ITM.VIEW
| Item | Change | Z.PO.ITM.EDIT
But we are unable to display the field in the SUS screen.
We had also referred to the following blog :
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
but had no success.
Please let us know if we did something wrong or are we missing something.
Also please let us know if BSP changes are really necessary to do this as neither in the SAP note nor in the above mentioned blog, there is any mention about this.
Regards
Kishan

Hi Bharadwaj,
Thank you for your inputs. I executed the program but it didn't display the field.
But I was able to rectify it by re-creating the steps mentioned in the blog (see original post). I had missed giving correct positions to the custom field.
Regards
Kishan

Custom fields not displayed inside 'Add. fields' tab of KS01/KS02 tcodes

Hi Experts,
I have created a new sub screen 0999 inside program SAPLXKM1 . This subscreen is being called from PBO of screen 0399 / 3399 of SAPLKMA1. During cost center creation (KS01) , one new tab 'Add. fields ' has been added but 0999 screen fields are not being displayed (tab page is blank).
CALL CUSTOMER-SUBSCREEN custflds INCLUDING 'SAPLXKM1' '0999'.
Enhancement : COOMKS01.
Please help what i have missed in this enhancement. Please let me know if there is any step step documentation for the same.
Thanks,
Arnab

Hi
Please check whether
1. you have added the custom fields and related texts to the subscreen 0999
2. you have written code in function exits for data export and import from screen to screen
Try passing the values to screen by using the below exits.
EXIT_SAPLKMA1_001 Flow Logic PBO
EXIT_SAPLKMA1_002 Flow Logic PAI
Shiva

Fieldname in not being displayed in the table maintenance

Hi Experts,
I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
plz help.
Thanks n Regards,
Mukesh

Hello Mukesh,
As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
If you are assigning the data element and the field label is empty, then + sign will come. In other case - if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
In both the above cases, you can change the column header manually in the layout.
Regards,
Selva K.

Dynamic image is not being displayed in Adobe Reader 8.1

Hi,
In interactive form, we have followed below required steps to show a dynamic image.
For the left image, drag and drop an Image Field element from the standard Library tab to the Body Pages pane. Select this image field and edit the following properties:
Click on the Layout tab and choose None for the Caption position.
Click on the Object, then the Binding tab and choose None for Default Binding.
Click on the Field tab, enter $record.SapOnlineShopUrl for the URL entry, and select Use Image Size for the Sizing field.
Click on the script editor and enter the following FormCalc script statement, which enables the dynamic integration of the image. Show: initialize Script: this.value.image.href = xfa.resolveNode(this.value.image.href).value;
Language: FormCalc Run At: Client
Image is displayed properly in Adobe reader 7.1 but it's not being displayed in Adobe reader 8.1.
I was going through some forums and understand that Adobe 8.1 blocks href URL. If this is indeed true, what's the alternative way to show a dynamic image?
Regards
Chandra
Edited by: Chandrashekhar Singh on Apr 24, 2008 7:28 AM

Soory, I thought its static image....
Regards,
Vaibhav Tiwari.
Edited by: Vaibhav Tiwari on Apr 24, 2008 11:45 AM

Contact pictures in Address Book not being displayed

Hi,
I am syncing my address book, calendar with Google. My "source" usually is the Mac address book. After having activated the "Mac <=> Google" sync, everything worked fine in the begining. But the last six weeks I seem to have a problem with the contact pictures:
I have created contact pictures for nearly 95% of my contacts. These pictures were copied to the address book either from iPhoto or from the web. Via Google sync, the contacts are transfered to my iPod touch, my iPhone and my Nokia Lumia 800.
Suddenly the contact pictures started to disappear from my Mac address book, but were still visible in my Google address book and my mobile devices.
When I started to add the pictures to my address again I realized that most pictures are still there, they were simply not being displayed in my Mac address book. By switching to "edit mode" and opening the picture field I could see the pictures again. After clicking "OK" the pictures is visible again.
I double checked all pictures, added the few missing ones and created an "address book archive". Yesterday all pictures gone again. I imported the archive, all pictures back again. This morning, the pictures are gone again. This whole thing doesn't seem to affect Google or the mobile devices.
Any idea what the problem with the address book is?
PS: Before you suggest to switch to iCloud. I need to sync my address book and calendar with all my mobile devices. If I would use iCloud, I would not be able to sync with my Nokia Lumia 800 (Windows Phone). And from comments in the forum, there seem to be similar problems with iCloud concerning address book information.
Thanks for your ideas.

I found this article online:
http://reviews.cnet.com/8301-13727_7-20004209-263.html
Export an Address Book Archive of all your contacts, then import it right back in. Worked like a charm.

Excelicon is not being displayed in the alv output

Hi,
iam using the standard tool bar, yet the excel icon is not being displayed in alv ouput.and also in the menubar list export the spreadsheet option is gr

OSS# 1140542?
or you may search other.
Edited by: Amit Gujargoud on Nov 3, 2008 3:10 AM

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers!

Coulmn values is not being displayed in obiee 11g

Hi All,
Below is the sample xml generated from data structure.
++
+<DATA_DS>+
+<G_1>+
+<LOCATION_NAME>ABCD</LOCATION_NAME>+
+<PRODUCT_ID>1012331403</PRODUCT_ID>+
+<PRODUCT_SUBID>101233140302</PRODUCT_SUBID>+
+<PRODUCT_NAME>ABCD1</PRODUCT_NAME>+
+<REVENUE>3924973.97</REVENUE>+
+</G_1>+
+<G_1>+
+<LOCATION_NAME>ABCD</LOCATION_NAME>+
+<PRODUCT_ID>1012331401</PRODUCT_ID>+
+<PRODUCT_SUBID>101233140104</PRODUCT_SUBID>+
+<PRODUCT_NAME>ABCD2</PRODUCT_NAME>+
+<REVENUE>688244.58</REVENUE>+
+</G_1>+
+<G_1><LOCATION_NAME>EFGH</LOCATION_NAME>+
+<PRODUCT_ID>1011165401</PRODUCT_ID>+
+<PRODUCT_SUBID>101116540101</PRODUCT_SUBID>+
+<PRODUCT_NAME>EFGH1</PRODUCT_NAME>+
+<REVENUE>3763099.99</REVENUE>+
+</G_1>+
+</DATA_DS>+
We were unable to see the REVENUE column values in the report. We were able to see the values while creating layout, but unable to see the values in report. Report is not having any filters or parameters. This is build on two tables. Revenue in one table and details in another table.
Thanks.

Hi,
Just noticed that, able to see column values in HTML, pdf views but unable to see in interactive view.
While creating the layout checked in Interactive view, at that time able to get column values, but in the report column values are not being displayed in interactive view.
But in HTML, list option , Repeating Section is not working, so have to see in interactive view only.
I can say, in Interactive vew Aggregate functions are not working properly. We need tro use Repeating Section and List option in report. so we need interactive view only.
Any ideas..
Thanks.

IView is not being displayed in full page

I created one iView, added it into a page. I set the layout as 1 Column Full width. My view is not being displayed in entire window. What kind of property, I should set in the page.

Sunil:
By default, the iView's height property is fixed. After I changed iView's height property to Full page, The page displays correctly.
I setup two views in one page using one column Full width. Both the iviews are setup in one page. Now both the iViews height is set up to Full Page as well as page's height is setup to Full page. Now, the Top iView is being displayed with 3/4th of window size and bottom iView is being displayed with 1/4th of window size. I want to display both of them with equal size.
Thanks for your help.

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

Images not being displayed in metro apps

OS: Windows 8.1 enterprise
Images are not being displayed (a small cross mark shown on the left) when I open metro apps that I download from Store. The store as well doesn't show images. I am able to see images in some built in metro apps like travel and weather.
What's the fix. I guess the company network is blocking it. What is the work around?
Thanks.
NOTE: This is WINDOWS 8.1 METRO UI issue. It doesn't have anything to do with VISIO. The only option that I had to choose when i selected Windows 8.1 is VISIO. This site appears to be broken and not user friendly.

Hi,
Which metro app did you download and occur the issue? As you post the question in Visio forum, did you use Visio 2013 preview? As far as I know, the version had been off the store after the official version released.
If I misunderstand, please give me more information (Such as App name) or images about your question.
Regards,
George Zhao
TechNet Community Support

Enhanced Datasource fields not getting displayed in Transformation

Hi,
Eventhough after replicating the datasource, the Enhanced Datasource fields not getting displayed in Transformation.
Eg I have done mapping of 6 fields in transformation from datasource to DSO
Now the datasource is enhanced with 8 fields...........The transformation is not showing the added 2 fields
I am deleting the existing transformation.Is this the only solution?
Kindly suggest your answers.
Thanks,
Sonu.

HI,
Deleting is not solution as it is common scnerio.
Go to the data source in BW and in change mode check the option "transfer" for this two fields and then see if its coming or not.
Thanks
Ajeet

Fields not getting displayed in AdvancedTable

I have created AdvancedTable region following the steps given in help of Jdeveloper.
Under advancedTable I have created 3 columns, one having a messageChoice item and rest two items are messageTextInput.I have set the ViewObject property of AdvancedTable and have also set the viewAttributes for items.
But when I run the page, It does not display any fields of AdvancedTable. It just gives the table outline and text that is set for table empty property.
I have also executed the VO in processRequest of page's controller.
What could be the reason for the fields not been displayed?
Thanks in advance,
Mitiksha

You should provide the ability to create rows, you can do it on the table by making the table editable and putting a Add another row or you can choose to add it in a drill down create page.
You can also add a set of new rows initially by creating and inserting rows in the vo in your PR.

Check boxes are not being displayed in any list applets

Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
Thanks in advance

One way that you could make it work (just tried it out again) is to use the windings font
and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
(depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
There is an example file: xdo example.cfg that you rename and change accoringly.
The font is there setup for windows 2000 as an example. Select the correct font
path - for my XP it is:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="C:\WINDOWS\fonts\wingding.ttf" />
</font>
Then you can put the symbols into your RTF template and it will be rendered.
At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
I am pretty sure I tried it before with 5.5.
Didn't have the 5.5 manual with me - so I have to check what that says again..
Hope it helps,
Klaus

Custom Fields not being displayed.

Similar Messages

Maybe you are looking for