Custom fields on me2k report

Hello,
I've need to customize te report RM06EK00 (me2k), I've make a copy Z* for adding my fields, but i cannot find, the structure used for output.
Can someone help me??
Thank in advance.
Roberto

Hi,
I want to same thing for addtiong custom fields on me3n report, did you figure it out. please suggest
thanks

Similar Messages

  • How we can add custom field in standard report 2kee.

    Hi,
    How we can add custom field in standard report 2kee.
    I need one extra field to add in 2kee report for the same is there any customization req.
    Regards
    Ravi

    Ravi,
    Which extra field do you want to add or see?  Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
    There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
    Nonetheless, if the field you want to add does not already exist, then yes you can do customization.  Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
    Have your abaper add the said field in the program or why not just create a query to pull the report?
    Elias
    Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

  • Alternative Account number - using as a custom field/Issues in reports pull

    Hi All,
    Requirement:
    Create a new field in the GL master that will link through to a new 8 to 10 character new Chart of Accounts (COA).
    We are presently using the "Group Account number" field from the GL master for reporting purposes through a Group COA. So this won't be available for our new purpose. Instead of creating a custom field and pulling the data, I'm thinking to use Country Chart of Accounts to fill this gap by using "Alternative Account Number" in GL Control data tab.
    I created a new Country COA and assigned it to Operational COA. Created new GL account (FS00) and also created a new Country Chart of Accounts (FSP0) at Chart of Accounts level and assigned this to the created GL (FS00). In this process I got couple of issues
    1) System didn't allow me to assign Country COA GL if already has the balance, and tried to change this error message in OBA5 without success. How can I add newly crated Alternative a/cs to the existing (balanced) GL A/cs?
    2) This time I created brand new GL a/c and added the alternative a/c and created new Financial Statement Version (FSV) assigned the newly crated a/cs but I couldn't run the reports on this new COA, getting following error message "Company codes and charts of accounts entered are incompatible" when executing F.01/F.08.
    3) May be silly to ask - why we are not maintaining the Alternative a/c at Company Code level (FSS0)? Why we are only maintaining at Chart of Accounts level (FSP0)?
    Would be glad if any one touch this area deep enough to understand easily

    Hi
    The system will update the amount at company code level GL only. You can post the entries at company code gl only, no option to post the transaction figures at chart of accounts level. So the group COA or country level COA will pick up the transactional data from the GL at country level. Remaining level GLs are link with the country level COA.

  • Reg : F4 help for custom fields in ALV report

    hi friends..
    in my internal table i have fields including 1 custom field..
    DATA : BEGIN OF i_final OCCURS 0,
      pernr LIKE p0000-pernr,
      begda LIKE p0000-begda,
      plans LIKE ZPOSITION-plans,  (custom)
      werks LIKE pspar-werks,
      end of i_final.
    i want to display this i_final table in alv. for that i genetrate one fieldcatalog
    PERFORM fcat USING:
                      'I_FINAL' 'PERNR' 'P0000' 'PERNR' '15' 'X' '',
                      'I_FINAL' 'BEGDA' 'P0000' 'BEGDA' '10' 'X' '',
                      'I_FINAL' 'PLANS' 'ZPOSITION' 'PLANS' '8' 'X' '',
                      'I_FINAL' 'WERKS' 'PSPAR' 'WERKS' '14' 'X' ''.
    in custom table zposition, i maintain serch help for custom field "PLANS".
    then i used reuse_alv_grid_display.. for all the std fields along wit custom fields
    i got f4 all std fields but for my custom i am not getting the f4 help
    how can i get the F$ help for this custom fields Zposition-plans..
    plz give some idea

    Hi
    In that Ztable against the field
    PLANS give the check table name as  <b>T528B</b>
    then it will automatically give the search help
    or you can create your own search help(elementary) and add to that field
    Reward if useful
    regards
    Anji

  • Adding New Custom field in KE30 Report

    Hi Friends,
    I have the requirement to Add new custon field in the KE30 report .
    Is this Possible ?
    Can anyone Tel me how to go about it .?
    Thanks in advance.

    Hi ,
    Please check the below link for KE30 -- COPA reallignment.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50482a0c-4033-2c10-3fb5-9f8c25360adf

  • Alignment and restriction of Custom field in SAP query report

    Hi Experts,
    I have one custom field in query report(SQ01) called Amount in local currency which is calculated based on Amount in document currecy * exchange rate.
    But this field values are coming in left alignment instead of right alignment so how i should get in right alignment and second issue is how i can restrict field value to only 2 decimals.
    I tried the below link "http://media.techtarget.com/searchSAP/downloads/SAP_Query_C7.pdf" but the steps they mentioned are not appearing in SQ01 for example in that link they mentioned to click Basic List option for advanced steps but when i click i goes directly to field list with field groups on left pane
    Please provide solution for this.
    Thanks&Regards,
    narasimha

    Hello narasimha,
    In the Infoset when you create the additional field, enter an existing SAP table field that has type CURR in the parameter labeled LIKE Reference.  For example you can enter BSAK-DMBTR as a value. When you select the additional field in the query, the currency will also show.
    Kind Regards,
    Rae Ellen Woytowiez
    Edited by: Rae Ellen Woytowiez on Apr 25, 2011 11:27 PM

  • Updation of custom BUPA fields through a report program

    Hello everybody,
    I have to change the entries made in BUPA table for a custom field ZZPAYMENT through report programming.
    I tried using the function modules in following sequence :-
    1)BUP_MEMORY_BUT000_GET
    2)'BUPA_CENTRAL_CI_CHANGE
    3)BAPI_TRANSACTION_COMMIT
    But the first FM "BUP_MEMORY_BUT000_GET" is throwing an error of not found .Here in this fm ,i m passing buisness partner i as an import parameter. You all are welcome to suggest me some other way for updating these custom fields

    When I have made changes to BUPA data, I have used
    BAPI_BUPA_CENTRAL_GETDETAIL
    BAPI_BUPA_CENTRAL_CHANGE
    BAPI_TRANSACTION_COMMIT

  • MS Project 2010: SQL Query Expansion to custom field

    In a further forum topic I got the solution for searching for server admins approvals pending, not publisched projects and team members not sended times.
    We defined a new enterprise custom field called "Status reporting" from type Flag (yes/no).
    Can someone help me to expand the following MS SQL query get the state of "Status Reporting" in the solution table?
    SELECT DISTINCT  R.RES_NAME as [RESOURCE NAME], RB.RES_NAME STATUS_MANAGER, P.PROJ_NAME,A.TASK_NAME,
    [STATUS] = Case TR.ASSN_TRANS_ACTION_ENUM When 0 Then
    'Pending' When 1 Then 'Accepted' When 2 Then 'Rejected' End,
    IS_PUBLISHED = CASE WHEN P.WPROJ_LAST_PUB >TR.ASSN_TRANS_SUBMIT_DATE THEN 'Yes' ELSE 'No' END,
    TASKSTATUS = CASE WHEN AU.ASSN_UID IS NULL AND TR.ASSN_TRANS_ACTION_ENUM = 0 THEN 'Saved' ELSE 'Submitted' END,
    BASELINED = CASE AB_BASE_NUM WHEN 0 THEN 'Yes' ELSE 'No' END
     FROM MSP_ASSIGNMENT_TRANSACTIONS TR WITH(READPAST)
    LEFT OUTER JOIN dbo.MSP_CONVERSIONS C ON ((C.CONV_VALUE =
    TR.ASSN_TRANS_ERROR_ENUM) AND (STRING_TYPE_UID = 'A16A340A-4AD1-4F62-880C-564C45021502'))
    LEFT OUTER JOIN MSP_ASSIGNMENTS_SAVED A WITH(READPAST) ON TR.ASSN_UID = A.ASSN_UID
    LEFT OUTER JOIN MSP_ASSIGNMENTS_SUBMITTED AU WITH(READPAST) ON TR.ASSN_UID = AU.ASSN_UID
    LEFT OUTER JOIN MSP_ASSIGNMENT_BASELINES AB WITH(READPAST) ON TR.ASSN_UID = AB.ASSN_UID AND AB.AB_BASE_NUM = 0
    LEFT OUTER JOIN MSP_PROJECTS P ON A.PROJ_UID = P.PROJ_UID
    LEFT OUTER JOIN MSP_TASKS_SAVED TA ON TR.TASK_UID = TA.TASK_UID
    LEFT OUTER JOIN MSP_PROJECT_RESOURCES R ON A.RES_UID = R.RES_UID AND R.PROJ_UID = P.PROJ_UID
    LEFT OUTER JOIN MSP_PROJECT_RESOURCES RD ON
    TR.ASSN_TRANS_DELEGATEE_RES_UID = RD.RES_UID AND P.PROJ_UID = RD.PROJ_UID
    LEFT OUTER JOIN MSP_RESOURCES RD1 ON TR.ASSN_TRANS_DELEGATEE_RES_UID = RD1.RES_UID
    LEFT OUTER JOIN MSP_PROJECT_RESOURCES RS ON
    TR.ASSN_TRANS_SUBMITTER_RES_UID = RS.RES_UID AND P.PROJ_UID = RS.PROJ_UID
    LEFT OUTER JOIN MSP_RESOURCES RS1 ON TR.ASSN_TRANS_SUBMITTER_RES_UID = RS1.RES_UID
    LEFT OUTER JOIN MSP_RESOURCES RA ON TR.ASSN_TRANS_APPROVER_RES_UID = RA.RES_UID
    LEFT OUTER JOIN MSP_RESOURCES RB ON A.WRES_UID_Manager = RB.RES_UID
    LEFT OUTER JOIN PS_TestFarm01__Prodcp20130606_Reporting.dbo.MSP_EpmResource mer on A.WRES_UID_Manager=mer.ResourceUID
    Murol

    Hello Paul,
    great, it works. I inserted:
    Statusreporting =
    CASE PV.[Status
    Reporting] WHEN 1
    THEN
    'Yes'
    ELSE
    'No'
    END
    LEFT OUTER JOIN PS_TestFarm01__Prodcp20130606_Reporting.dbo.MSP_EpmProject_UserView PV
    ON PV.ProjectUID = P.Proj_UID
    The first line I understand a little bit but I don't understand 
    PV.[Status Reporting]
    But, the second line "LEFT OUTER ...", I doesn't understand
    Many thanks and kind regards
    Peter
    Murol

  • R.C  custom fields

    hi friends,
    could u plz tell me is it possible to give custom fields in the standard selection screen through HR Report category.
    thanks in advance,
    regards,
    priya.s

    Hi,
    It is not possible to give custom fields in HR report category.
    U have to declare those fields in program, see the code below.
    PARAMETERS: v_test TYPE p0001-zztest.
    GET PERNR.
    CHECK p0001-zztest eq v_test.
    Rewards points if helpful.
    Regards,
    Srinivas Ch

  • Add custom fields on selection screen  and ouput in Transaction QM11

    Hi All,
       i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
      i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
    please requeting the help asap if it is possible.

    Have a glance in below thread.
    Enhancing transaction QM10
    Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well.

  • How to add custom feild in std report 2kee

    Hi,
    How we can add custom field in standard report 2kee.
    I need one extra field to add in 2kee report for the same is there any customization req.
    Regards
    Ravi

    IF you are in ECC 6.0, you can use enhancement option or if you are below the version, you would have to copy into Z program and then create Ztransaction for this. In Z program, you can add whatever you want.

  • ADDING CUSTOM FIELDS TO IW38 IN OPERATIONS LIST

    Hi Gurus,,,
             I have a requirement where i want to add some custom fields in IW38 Report in the OPERATIONS LIST(NOT BASIC OR FIRST LIST.)
    I tried Copying the program of IW38 and develop Z program in which i appended some fields in RIHAUFK_LIST.
    But these fields are not showing on output.
    I Think I have to add these field to ALV field catalog.
    Kindly suggest,, Or I should go by implementing the enhancement IWOC0004,,,, Could i add fields to Operations List Using this enhancement.
    Thanks and regards,,
    Sandeep.

    Hi Spank,
    Check this link which will solve your issue.
    Step 1: First read the documentation for enhancement (IWO10018) in SMOD.
    Step2: Then execute the exit and activate the same.
    Step3: Goto AUFK table. Create CI_AUFK structure with two fields shift incharge (ZZSIC) and Shift (ZZSHIFT). Activate.
    Here it may take minimum 30 min to activate the table. As it hits many views and structures while activating. See the warning message after activation, which is normal, and would not affect your work.
    Note: When you want to add further fields after activating the CI_AUFK structure then it will again take min 20 min to activate with same warning message. Hence it is suggested that complete all required fields at first go. Since activating CI_AUFK structure means regenerating table.
    Step4: Click on screen exit SAPLCOIH green button.
    It will ask to create screen no. 900.  Create in sub screen area and activate the same.
    Click on maintain in orig.. button.
    Step5: Create subscreen area and attach the respective structure fields to each input field.
    CI_AUFK-ZZSIC to Shift Incharge and CI_AUFK-ZZSHIFT to Shift.
    Step6: Then create PBO and PAI module pools.
    Step 7: All PBO modules are saved in include ZXWOCO01 and All PAI modules are saved in ZXWOCI01.
    Step8: Code each module as given below or as per your requirement.
    Step 9: Once you activate the code, it will start showing in IW31/ IW32/IW33 t codes under enhancement tab.
    Step10: Now you can write your own code at each exit.
    EXIT_SAPLCOIH_018: This is getting triggered PBO module. Hence all data from SAP application to screen area are passed at this exit. Use import parameters SAP_CAUFVD_IMP and COCI_AUFK_IMP.
    Step 11: EXIT_SAPLCOIH_019: Customer Enhancement for User Fields for Order Header PAI. This exits saves data after PAI module. Hence pass data from screen area to SAP application by using export parameter COCI_AUFK_EXP.
    How to display new field at list disply?
    Now how to display the same added fields at IW38 list editing report. (Enhancement name: IWOC0004
    Step1: Plz read the documentation for your reference.
    Step2: Activate the enhancement. (It should be assigned to a project )
    Step3: Now in report IW38 (RIAUFK20), search for REUSE_ALV_GRID_DISPLAY.
    Under tables you will find OBJECT_TAB as the internal table for displaying data.
    And it includes a structure RIHAUFK_LIST
    We need to append our own structure to the above structure by clicking at Append structure button. So that while populating data via OBJECT_TAB internal table it will refer the fields and will start showing the data at list display.
    Step4: Now goto IWOC0004 and activate. In  EXIT_SAPLIREP1_001 write ur own code to modify the list display at IW38.
    The fields will start populating at IW38 list display.
    I got this from our SDN given by Rath.
    Regards,
    Madhu.

  • Custom field's text not getting displayed in standard report

    Hi All,
    I have a requirement like this .
    There is a Custom field which we have added in a standard FICO report ie S_PL0_86000030 ( G/L Account - Balances ).
    The custom field is added through a report painter , while seeing the config of report painter the custom field is showing the selection text , but when we run this transaction S_PL0_86000030 , the technical name of that field appears in the selection screen .
    For example if the field is ' matnr'  then we give the text as 'Material Number' . Then in the screen this field is getting displayed as Matnr instead of Material Number.
    Please suggest me on this.
    Thanks,
    Sumit

    In transaction GRR2
    Insert->
    selection parameters ->
    take the variable type as >Tesxt varaible for selection parameter
    chosse >material no.
    hope ths helps
    Bhanu

  • To show a special field on the ME2K report

    Hi everyone,
    The question is about adding a field in the ME2K report. In the layout is needed the PO status, that is wether the PO is still open/completed or not. I was taught dynamic selection can be used to filter by the 'Delivery Completed' criteria, however the info does not appear on the report when doing this way. Is there a way, excl. programming a new transaction, to have the 'Delivery Completed' field appearing on the report? Are special fields available for ME2K?
    Many thanks and regards,
    SB

    to close

  • MB5B report missing custom fields in background execution

    Hi,
    I have added few fields in MB5B transaction, when I run transaction in foreground the new fields I am getting in the report output but when I run report in foreground I am not getting custom fields in the spool.
    Please let me know why I am not getting custom fields, any advice.
    Thanks,
    mahahe

    Did you save the changed layout and used that on the selection screen while running in background?

Maybe you are looking for