Custom File Name Format in B2B Console

Hi,
Please let me know if we can have a customized File Name Format in the B2B Console for the X12 EDI/XML Files.
I have read the Oracle doc and only the following formats are mentioned:
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
Is there a way to have a PO# (From the Trading Partner Payload) in the filename format?
You help is appreciated.
Thanks
Priyanka G

no. It has the format which helps B2B in identifying the agreement

Similar Messages

Custom file name format for EMAIL Attachment

Hi,
We are seding attachment to Supplier by using Email Transport protocol over Custom Document Generic Exchange.
It delivers mail successfully with an attachment as EMAIL 1.0. but we want to customize the filename( ex: c111.txt) . how can we change the attachement filename ? and coud u tell us what are the properties are required(tip.properties) for email tranport.
Regards,
Jawah

Hi,
Have you checked -
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_009_Transport_SMTP.pdf
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_021_TIP_Properties.pdf
Also refer -
override default send from email id and attachment name in email delivery
I am not very sure whether name of attachment can be customized. I think anybody from Oracle IDC team can confirm the same.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Oct 13, 2009 2:09 PM

File name format of rotated access log

Hi,
I'm using wls5.1sp9 on Solaris.
Is it possible to specify a different file name format of the rotated http access
logs?
Instead of getting files named access.log0001 and so on, I would prefer access.log.<date>
or some other custom format.
Best regards,
Torleif Galteland

Hi,
Thanks for your response. But I have another query. The name of the file as per your reply is like UsageReport.xls correct? Now my query is, should it contain some date,account id/orgid etc associated for that usage. The reason for my query is that if MSP
downloads the usage for different orgs having same bill date then it would conflict with the different usage files.
Thanks And Regards,
Sumanta Saha

Action hard codes custom file name

I recorded an action to crop and save for web. I have done this 1000's of times over the years, but in CS6 it is hardcoding a Custom File Name, and in the wrong format too boot.
I am saving as JPG only and accepting the default name, which should leave me with an action that has no custom name, yet it does, and the custom name is of an HTML file name.
So, when I run my action, it names every single file the same name, and never creates a jpg.
This is a new bug in CS6. It wasn't here before.
I can't figure out how to get around it????
Kirk

Figured out a way to work around this, but it is irritating. Instead of my action doing this:
Flatten
Crop (user interaction)
Save For Web
Close (without saving)
I have to do this:
Flatten
Save as JPG (in same directory where I want the Web file to go)
Crop (user interaction)
Save For Web (Over top last saved file)
Close (without saving)
For some reason, when I use the save as JPG, it doesn't custom code the file name and when I save for web in the same place it also doesn't custom code the file name.
I never had to do this before in all the years of using this type of action, and I use it ALOT!
I have found that it sometimes does not hardcode the file name, but there seems to be no rhyme or reason.
Kirk
Photoshop CS6 on Windows7-64, haven't tested this on my MBP

Rename file name & format using ftp sender

Hi all,
This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
client format is : SAP_Order.txt (Pervious file name).
We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
How can i achieve this requirement?
Can please suggests me solutions ASAP.
Best Regards,
satya,

Hi,
if your requirement is to pick the existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
then its simple...
use two receivers instead of one , one for point to target and other for sender itself... (second receiver is for changing the file name format....)
Hope the above understanding is correct...if not provide more details of your requirement...
HTH
Rajesh

IPhoto: After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file.

After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.

Hmm the advice has been not to use referenced libraries - you ignored and did it anyway and you find the advise not helpful
Furthermore the advice is that if you choose to use a referenced library that you assure that the path never changes - you also choose to ignore that advice and do it anyway - and you blame the peopson trying to help you
once again - you have one choice - change the file names back and put the files back in the exact same place - and again you are totally ignoring the advice and instead name calling and attacking the person giving you advice
Maybe life would be easier if you followed advice rather than ignoring it and then complaining that things no longer work
change the name back and you will be fine until the next problem you hit that is caused by choosing a referenced library
Have a nice day
LN

How to get the file name from Oracle B2B 10g

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

Run Applet On Server Using 8.3 File Name Format

Hello Everyone,
I am currently trying to produce an applet that will display content from a PLC (which hosts its own webpage).The PLC itself only allows files using the 8.3 file name format to be stored on it (eg. 123456789.123).
I have tried a few simple things, such as changing the ".class" file extension to ".cls". But this just produced an error in my internet browser (IE 8).
Any help and/or work-arounds would be greatly appreciated.
Thank you,
Vincent Wiebe

849427 wrote:
..I did not think of that, ..That's why forums rock. Many minds are better than one. ;)
Thank you very much :)You're welcome. :-)

Custom File Name-Original File Number doesn't work. Why?

I want to export and rename some files with the "Custom File Name-Original File Number" option. Yet this doesn't seem to work, and I wondered what I might be doing wrong. The filename will only rename as the custom text.
The sample file name shown underneath has a dash after the custom text bit, but then the extension only eg Newname-.tif
I am now using LR 4.2 but I seem to remember doing this renaming OK with an earlier version (though I can't remember which). This suggest that either there is a problem with this specific version or that I have something set differently to the way I had it initially. I am hoping the latter is the case. Any suggestions as to how to fix this would be welcome!

I am sorry to report that i don't know how to create a screenshot. However, what I am getting, exact;ly is this:
From Library grid view: F2 or Library>Rename Photo
Then little screen appears with heading Rename Photo:
File Naming> set to Custom Name - Original File Number
Custom Text> NewFilenameHere
Example: NewFilenameHere-.tif
Clicking on OK changes the filename to just the custom text without the original file number. Original File name shows in metadata eg DSC01129-Edit.tif
The only way i seem to be able to get the original file number with the custom text is to include it manually as part of the custom text.

[5D Mark III] Why begins my custom file name with an underscore

Hi everybody,
I am confused. I have set up a custom file name (Menu Screen: "Set Up 1" -> "User Setting 2") with 3 individual letters and the used image size. I set it up as "RAW" so the output should be like "RAWL0001.cr2" but the filenames are always using underscores instead of the first custom letter: "_AWL0001.cr2".
I have also tried the "User Setting 1" which has 4 individual letters and no indication for the image size within the file name.
Same here.
What baffles me most, is that the manual states that it is not allowed to use an underscore on the first position.
Anybody an idea?
Regards,
Oliver
Solved!
Go to Solution.

Look up "Setting the Colorspace" in your manual.
You've set the camera to shoot in ADOBE RGB which isn't advisable for the majority of users.
"A skill is developed through constant practice with a passion to improve, not bought."

Listening channel : File name format.

Hi All,
We have below use case.
1# We need to poll and read files from EDI_OUT folder using Generic-FTP.
2# The files in that folder will follow EDIOUT_TimeStamp.txt format.
3# But our FROM_TP name is "GREEK" and TO_TP name is "LATIN".
Then what configuration changes we need to make , So that the listening channel delivers these files to GREEK_To_LATIN agreement.
in simple words, Can we read files which does not contain FROM_TP as starting string in their file names.?
Thanks,
Sid.

Please refer -
http://www.oracle.com/technetwork/middleware/b2b-integrations/learnmore/b2btn030b2bbinarytransfer-1648763.pdf
The B2B identifies all the properties while transmission but gets HTTp 400 Error.It is connectivity issue and has nothing to do with the content of the file. Cross-check the connection details provided in the partner channel configuration.
Also if I try to download payload from B2B UI through Report->Business Message, it does not give the correct zip file. The payload is corrupted.It will be. Reports are not meant for displaying/downloading binary data.
I get the error for Document protocol identification error.Refer to the above document. You need to set two HTTP headers for receiving binary doc over AS2 -
DOCTYPE_NAME and DOCTYPE_REVISION
Regards,
Anuj

Output file name format

Hi All,
How can i configure output file name to the desired format generated in target directory in communication channel configuration in conf scenario.
ex: i want to generate the file in the below format..
YYYYMMDD_<Receiver>.TXT
Thanks and Regards
Venkatesh

Hi,
This is the UDF u have to write in Mapping,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key =
DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Using this u will get the File name into target side,In this UDF add the Time stamp.
Check this link for more details.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
phani
Reward points if Helpful

File Name Format

I have a coldfusion app that allows users to upload images.
The problem is that many of these users are not web savvy and
upload hte wrong types of images with terrible names. I have error
handling in place but would love to be able to disallow uploading
of certian types of files from within the cffile dialogue. Like
only allow jpegs.
More importantly I am looking for a good name formatting
function that will strip out all the bad characters and spaces and
truncate the name and make sure they end with the proper extention.
Is there something out there that could do this? Thanks.
Eric

You don't need to write any javascript.
CFinput takes care of all of this for you...
<CFINPUT type="file" name="FileValid"
validate="regular_expression"
message="Enter a valid image file or else."
pattern="[a-zA-Z0-9_:\\]+\.(jpg|png|gif|JPG|PNG|GIF)"
validateat="onblur,onsubmit"
>

Custom File name for AS2 FA

Hi Gurus,
We have a specific requirement, wherein we are expected to be able to pass a unique file name to all the FA, sent over AS2.
The FAs currently are being handled in B2B.
I also understand that this can be done from the middleware layer ( How to setup filename in AS2 protocol ).
Is it also possible that the same can be done from the B2B itself, probably by using a Callout, so we are able to send it directly from B2B? Please advise.
Thanks in anticipation of a quick response.
Regards,
Sambhav.

Hi Sambhav,
It will be easier and performance oriented if you do it at middleware. It's my personal opinion that callouts should be used as a last option.
Regards,
Anuj

How to export a report data with a custom file name?

Hello:
Env: OBIEE 11g Answers/Interactive Dashboards
I have a tabular report (built in Answers) and displayed in a Dashboard. I want to export the report data in csv format prefixed with the <OBIEE user login name>_<Name of the Report>_<current timestamp> on a certain folder.
Any ideas appreciated..
Thanks
Sankar Bala
Edited by: 589151 on Mar 7, 2012 6:14 AM

This does not help solve my problem.
Tabular Report->Place it in a section in a dashboard->Report Links (Export Option turned on). When doing the export, I want to change the file name as the <Login Name>_<File Name>_<Time Stamp>.csv when doing the export into csv from the dashboard.
Regards
Sankar

Custom File Name Format in B2B Console

Similar Messages

Maybe you are looking for