Custom Function in a Sequence Not Working

Hi All,
We have defined a Custom Function and it has got a class (ZCL_IP_DERIVE_XXX_XXXX).
Further, in the IF_RSPLFA_SRVTYPE_IMP_EXEC_REF~EXECUTE method of this class, we have defined a logic of appying a new Index (Sales Curve) and the forecast values are uplifted accordingly.
This Custom functon of Applying a new Index is one od the step in a Planning Sequence.
When I try to execute only the step of applying function in the modeler, I get the output as required and I can see them accurate in the trace.
But If I execute the entire sequence either step by step or at one go, the function is not applied. In the messages, it says step1 to 7 are executed. But there is no change done to the records read.
I doubt the values written back in the function are refreshed as soon as the come out of the step. Correct me if I am wrong.
The Values are read and written abck to the table C_TH_DATA.
Are we populating the right table? Do let me know if I need to change anything in the sequence.
Regards,
Harika

Thanks for your replies.
As suggested, the problem was with in the sequence as in the step before the function is applied, they are getting deleted...smll change in the code fixed the issue.
But now, when I try to run the same sequence on a button in a workbook, it doesnt work.
I checked the sequence behind the button. it is assosciated with the same one defined.
But no clue why it doesnt work.
Also, please let me know if there is any option to unhide the fields on the workbook in design mode.
Regards,
Harika

Similar Messages

Repost Function using Variable is not working

Hello experts! I am on BW-BPS 3.5. I have set up a repost function using variables to change a characteristic value for Business Unit.
1. I created 2 variables as Bus.Unit From and Bus.Unit To in the Planning Area. I am not using the variables in my planning level.
2. I entered the variables in the parameter group New Values area for the From and To Values.
3. My goal is when the user executes the Repost Function for a Variable Prompt should appear and have the user select the From Business Unit and To Business Unit.
The Variables are set up as USERVALUE User-Defined Values, Restriction of Values required by user and I have tried with/without option of Input Allowed by User.
Can you tell me what I am doing wrong, I expected a variable prompt when executing the Repost Function but it does not work.
Thank you,
Teri

Ravi, Thank you for your reply however I contiue to have errors or the execution does not repost (change any value) as noted below.
1. I have 2 Variables in Planning area var1 (from) var2 (to) for the same charateristic which is Business Unit
2. Business Unit is in the level, on the selection tab to add the variable I can only add 1 variable, So I added var1 (from) to the level.
3. Parameter group for old and new values - I have Var1 (from), var2 (to)
4. Report Function - are you referring to Reporting variables in BPS? I have set this up as suggested in the "How to Use Reporting Variable in BW-BPS" document.
5. Enter plan data: I receive prompt for VAR1, mandatory. At this point there is no value in Var2.
6. Execute Repost function - I receive an error to "Restrict Var2"
7. If I set variable values and add a value for Var2 I receive an error "The generated data is not contained in the selection condition".
Next I removed VAR1 from my planning level and turned on the option 'Selection in package' for Business Unit. This seems to work well.
What do you recommend?
Thank you,
Teri

Test sequences not working in standard prototype adaptor with Execute Steps in process

Test sequences not working in standard prototype adaptor with "Execute Steps in process" but the sequences works in "Execute steps in an External instance of CVI"(Debug mode). Pl help with solution
Apriciate your help
Regards,
Sharanu

Sharanu,
Thanks for contacting National Instruments. It would help us out a lot if you could specify exactly what is not working. Will the sequence just not run? Is it giving you an error message? Or what exactly does not work about it? The initial thing that I could think of that would make it not work in External Instance but not using the RunTime Engine is that you might be missing a support library when trying to run it in this configuration. If you click on the "Configure Auto-Loading of Support Libraries Needed for Linking .objs and .libs" button, you can make sure that all the support libraries you might be using are added in this list (you can add them using the "Add Other Libraries..." button). If this does not fix your problem, then let us know a litt
le more about what is going on and we can help you from there. Thanks.
Adam B.
Applications Engineer
National Instruments

Customized strings in iPad viewer not working?

Hello,
per request of client i've tried to change one string in viewer for iPad. So i've created template in DSP App Builder, modified this template on my computer, choose this file in App Builder and prepared another build (V28). Unfortunately, i still see old original string (i've double tested that i'm downloading new version of app). When i now check DPS App Builder, it just says "Asset stored on server", so i asume, that everything goes smoothly on this side.
Any similar experience with customized strings?
Thanks
Martin

Everything was done from scratch with V28.
1. 10. 2013 v 16:14, Bob Bringhurst <[email protected]>:
Re: Customized strings in iPad viewer not working?
created by Bob Bringhurst in Digital Publishing Suite - View the full discussion
That's odd. It worked for me when I tested it. Perhaps you should try moving the current xml file to a different folder, downloading a new version, copying and pasting, and rebuilding.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5728130#5728130
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5728130#5728130
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5728130#5728130. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

SUBMIT FUNCTION ON COMPRESSOR IS NOT WORKING

Hi Everybody!
I was overseas for a while and when I came back to work, my workstation was updated I guess.
I'm using the FINAL CUT STUDIO 3, I did not any updates yet.
My issue is when I'm trying to send a sequence, from the timiline in final cut (SEND TO/COMPRESSOR) everything seems to be normal. Once I do all the settings and destinations on COMPRESSOR, and I'm ready to start the render, I'm able to see the SUBMIT button, but it seems to be inactive...
Probably u have already figured out the way to fix this issue...
please help guys, this is delaying my overall process so much!
Thanks!

Hi everybody!
Compressor don't works! I can't use the submit function because it doesn't work. Help me!
I removed compressor and Qmaster and re-installed them: in this way the submit function works and I can save the job on "this computer", but when I download the compressor's upgrade the submit function stops to work.
I'm sorry, I'm italian and my english is very bad!

"Document type" in access sequence not working in free goods

Dear All,
our requirement is to provide free goods with the main items in portal.
for this i defined access sequence 1.Customer/Material and 2. SalesOrg/Documnet Type/Material.
for access sequence Customer/Material it's working fine but when i use SalesOrg/Documnet Type/Material it's not working.
problem is that when i use Document type in access sequence it's not working.
pls help.
Radhashyam Sahoo

Hi Apoorva!
What do you mean with "Access Sequence"?
In CRM 7.0 EHP1 there is a generic framework-feature available which allows the defininition of the tab-order.
Best regards
Arno

Validation sequencing not working

hi
I have found that my item level validations on a page are not working as I expected. I validate a field (P74_change_id) to 'must be numeric', then I have another validation with a much higher sequence number that checks whether the value already exists in the database, but this is causing an error if the value if not numeric. The following text is taken from my debug mode, what surprises me is the second line that clearly states the first 'not numeric' validation is functioning correctly and returning a fail, but it still carries on with the other validations.
0.28: ...Item is numeric validation: P74_CHANGE_ID
*0.28: ...Validation did NOT pass*
0.28: ...Item Not Null or zero Validation: P74_CHANGE_ID
0.28: ...Item Not Null Validation: P74_RAISED_DATE
0.29: ...Item is date validation: P74_RAISED_DATE
*0.29: ...Validation did NOT pass*
0.29: ...Item Not Null Validation: P74_APPROVED
0.29: ...Item Not Null Validation: P74_TYPE
0.29: ...Item is date validation: P74_APPROVED_DATE
0.30: ...Exists Validation: type="NOT_EXISTS" select * from budget_ct_header where (change_ID = :P74_change_Id) and (change_ID_rev = :P74_change_id_rev) and (project = :P74_project) and (type = :P74_TYPE)
0.30: Show ERROR page...
I get a 'ORA-01722: invalid number' and 'Error ERR-1006 Error in validation routine' referring to 'Exists Validation: type="NOT_EXISTS" select * from' etc the on the page below the debug.
Any ideas/thoughts??
Thanks
-Marc

Marc
Apex will check all validations before the error page - hence the 'X errors have occured' message. This is a good thing, there's nothing worse for a user to get an error, fix it, re-submit the page only to get another error etc etc.
Looks like you need to check you NOT EXISTS validation so make all the other validation conditional never and then get that one working.
I think the problem is probably with one of the bind variable predicates where you reference the page items. Have you tried wrapping them in TO_NUMBER() where appropriate?
By the way you don't need brackets round your predicates in the WHERE clause of your not exists query.
Let me know if you need further help.
Cheers
Ben
Sorry forgot to mention that your ORA error seems to relate to your NOT EXISTS query - not your IS NUMERIC validations
Edited by: Munky on Apr 8, 2009 11:37 AM

For years FF has worked beautifully with Constant Contact. Now sevear function in CC will not work in the FF browser - they work in all other browsers. Help

Until one week ago, I had no difficulty or problems working Constant Contact while open in my Firefox browser. Now I have several with some functions in CC not working.
Inserting images, setting hyper links, changing background color - These are three necessary functions that I use in Constant Contact emails that no longer function when opening CC in Firefox browser - latest update was today 10/29/2013.
The function work in the Chrome and Internet Explorer browsers.
I have contacted Support at Constant Contact and the issue is not with their program.

Hi eaglegrafix, try disabling ALL nonessential or unrecognized extensions (i.e., anything you don't think you'll need for 24 hours) and see whether that solves it. You can do that on the Add-ons page:
orange Firefox button (or Tools menu) > Add-ons > Extensions category ''(in the left column, click Extensions)''
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Does that help narrow it down?

The minimize function for Chrome is not working

Hello everyone,
since yesterday the yellow round icon (which allows you to minimize the window) on Google Chrome it turned grey and it's not working anymore. Also all the other ways to minimize windows are not working.
This is happening only with Chrome, and when I'm working with it the dock disappear...
How do I restore the minimize function for Chrome?
Thank you,
Silvia

I'm using 10.7.2. When I highlight some words, the highlight turns into a colored oval! The PDF file is from a vendor.

Java downloading function FtpClien.get() do not work in Solaris 10

I wrote a java ftp code using java class provided by sun (sun.net.ftp.FtpClient). It worked nicely in Solaris8. After new update from Solaris8 to Solaris10, this function does not work anymore. Specifically this function "TelnetInputStream in = ftpClient.get(remotefilename)" does not work. It stucks there forever enven without giving an exception. Does anyone know this problem?
Thanks
P.S. I still can use the java function "ftpclient.put()".

http://forum.java.sun.com/thread.jspa?threadID=5276131
(never mind that this OpenSPARC forum is utterly wrong for your question)

Nudge function with arrows will not work in PS cs2

I recently installed photoshop cs2 on my pc with windows vista home premium. And the nudge function will not work using the arrows. Is there a work around for this?

SWSinNC wrote:
I will, thanks
so your saying that if it's fake...that specific function is a common flaw ?
Exactly!
Unfortunately the full thread recounting this saga got lost in the forum changeover, but the fake copies come in authentic looking shrink-wrapped boxes with printed documentation; and everything works except the nudge.
Or sometimes other keyboard combinations.

Web Viewer embedded (custom domain) and button url not work!!! (Urgent!!!)

Many sorry for this question - we have a Web Viewer embedded (custom domain) that have all url (button with open in browser) that not work!
On tablet (Apple + Android) the button work great but on web viewer they do not work!
Any ideas to solve?
I see it: Where to place add externalLinksOpen : 'window' to FrameService?
web viewer URL links

Any ideas to solve?

Javascript functions to control QuickTime not working in Firefox

I am using the provided Javascript functions to control QuickTime (7.6.2); however, the functions are not working in Firefox (3.0.11), whereas they are working in Safari (4.0.1).
I create a QuickTime Player, as follows:
QT_WriteOBJECT('Music.mp3', '0', '0', '', 'AUTOPLAY', 'True', 'KIOSKMODE', 'True', 'CONTROLLER', 'False', 'LOOP', 'False', 'obj#id', 'qtp', 'emb#name', 'qtp', 'emb#id', 'qtpID', 'ENABLEJAVASCRIPT', 'True', 'SHOWLOGO', 'False', 'VOLUME', '256');
The Music.mp3 file starts playing in both Safari and Firefox; however, the Javascript functions to control that playing work only in Safari, not in Firefox.
Examples of QuickTime functions that work in Safari, but not in Firefox:
document.qtp.Stop();
document.embeds[0].GetRate();
document.embeds["qtp"].GetTime();
document.embeds["qtpID"].GetQuickTimeVersion();
The GetRate and GetTime functions always return a "0" in Firefox, the Stop command is ineffectual in Firefox, and the GetQuickTimeVersion function aborts the Javascript code in Firefox.
Any ideas what's happening?

Dave, what you have done is very similar to what I have done, with the following exceptions:
1. I'm using the regular HTML version of QT_WriteOBJECT rather than the XHTML version.
2. My first parameter is an .mp3 file rather than a .mov poster in combination with an 'href'.
3. I'm not using some of your parameters, such as, 'target', 'targetcache', 'scale', 'href', and 'name'.
4. Instead of 'name', I'm using --- 'obj#id', 'qtp', 'emb#name', 'qtp' --- which allows me to then reference the QuickTime functions as --- document.qtp.Play(); document.qtp.Stop(); --- etc.
5. I'm not creating HTML buttons as player controls; rather I am using my javascript program to detect and control the player operation with functions such as --- document.qtp.GetRate(); document.qtp.GetTime(); document.qtp.GetDuration(); document.qtp.SetVolume(); document.qtp.SetMute(); document.qtp.Play(); document.qtp.Rewind(); document.qtp.Stop() --- etc.
6. I change my .mp3 files using --- document.qtp.SetURL();
7. All my javascript is contained in an iWeb HTML snippet using an iframe.
Essentially, I've created a jukebox with button images of album covers that can be visually scrolled and then clicked to play an album via the HTML onClick, onMouseOver, and onMouseOut functions.
This all works without a hitch in Safari; however, in FF, NN, and Opera, it only works if the iframe is completely visible on the screen. It can't be scrolled offpage, and the HTML album cover buttons in the iframe cannot be dimensionless, hidden, or blocked from view.
I really think it's the iframe that is causing this behavior in all the browsers (except Safari).
BTW, as an aside, I don't have a Windows machine, but no one I know using IE on a PC has been able to get my QuickTime Player working. I think it's because, when I want to collapse an album cover, I set its width to '1px' ('0px' works only in Safari), but I think IE may require a minimum width of '2px'. I have not tried changing my image widths to '2px' yet.

Search Function in Finder is not working

I'm a MacBook Pro User. The problem which I'm facing is with Finder Search function
Its search function is not showing any result. I tried with the know file name and with the known location, but its search command is not working.
eg: I created a doc file and saved it on desktop, then in finder search box I used the same name of the file which I saved on desktop, but its not showing any result.
I have huge amount of data on HD and I want to locate one file which is making my life miserable, and I can not bear my mac to add insult to my injury.
PLEASE HELP

Add me to the list of confused.
Just purchased a used macbookpro - working very well in all aspects, except finder and spotlight are not working. Thanks to this site I am working around the problem with easyfind, but would prefer to work straight from finder.
- heres the specs...
Model Name:    MacBook Pro
Model Identifier:    MacBookPro4,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.4 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    3 MB
Memory:    4 GB
Bus Speed:    800 MHz
Boot ROM Version:    MBP41.00C1.B03
SMC Version (system):    1.27f3
Serial Number (system):    W8830FGWYJX
Hardware UUID:    B15949A7-2F79-5A07-8860-7FFF7B8E1C02
Sudden Motion Sensor:
State:    Enabled

Custom Logi task flow is not working

I created a custom task flow for webcenter spaces login and deployed it using extending webcenter spaces, added it to one of my custom resource catalogue and then added it to the spaces login page. The login process works fine but the problem is that i am Evaluating an EL to check if the user falls under a particular group and if true then redirect him to a particular space. When i try login for the first time it authenticates but even though the user belongs to the desired group, the EL is still evaluated to "false", which in turn returns truw if i try login for the second time. i think the WCSecurityContext is not working for the first time. Any guesses why? or is there a different problem in the implementation. The EL is "#{WCSecurityContext.userInGroup['XYZ']}" where XYZ is one of the groups in OID.
Urgent Help required..............
Thanks in advance

try
securityContext.userInRole instead of WCSecurityContext

Custom Function in a Sequence Not Working

Similar Messages

Maybe you are looking for