Custom GO button in 11g
hello Experts -
Could you please let me know if we can have the custom/universal GO button as we use to have in 1g by writing a javascripts.
We have upgraded 10g reports t0 11.1.1.6.2 env and we facing this issue where we see multiple apply buttons. In place of which we will like to have any one GO button.
Thanks, Kindly help.
Bhupendra Gupta
Single Go button for all prompts - without making changes to system files
Re: how to create Global Go button
Similar Messages
-
Using a custom menu button on the slide to open and close TOC in Captivate 7
HI
I have a custom menu button. When the user clicks I want to show TOC, ( I see there is a state to show TOC) but when the user clicks the same menu button again on that slide how can I hide the TOC. ie toggle between hide and show.
thanksI described some possible scenarios: Toggle Shape buttons - Captivate 6 - Captivate blog
-
I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
Does anyone have any ideas how I could custom trace?It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?
-
How to get "Selected" color for custom toolbar buttons?
RH 8.0.2.208
RoboHelp HTML
WebHelp output
I'm getting flack from internal QA folks about the custom toolbar buttons not having the same "selected" color as the default buttons (Contents, Index). I've copied the background color info from the <btnselected></btnselected> section for the built-in Contents to the <btnselected></btnselected> section for a custom toolbar button, but RH is ignoring it.
Any hints?
LeonYou could try using the raw converter. Open one file and edit it (File>Open, pick the image and choose Camera Raw as the format before you click Open). Then open the next image and click the little four-lined square on the upper right side of the ACR window and choose Previous Conversion from the flyout menu.
-
Form Alignment issue in table: Custom submit button
Yesterday as I was putting together a "check availability"
form within a horizontal table, I ran into difficulties getting the
form to vertically align in the middle, it kept aligning to the
top. I was able to correct the problem using the following CSS:
<style>
form {
display:inline;
</style>
Now this morning I was switching the generic "submit" button
with a custom gif button using this code within the form:
<input type="image" name="submit" src="image.jpg"
width="110" height="20">
This worked fine, but every part of the form is aligning to
the middle correctly except the custom button which is sticking to
the top. I'm completely lost on how to resolve this issue. If
anyone has any information on how I can fix the button to align
with the rest of the form I would greatly appreciate your help. I
am a beginner at adjusting code.
Thank you so very much!Hello Ram,
> No custom coding.
The current forum is for developers. That's why I'd recommend asking non-programming questions in the
Using SharePoint Designer, InfoPath and Other Customizations forum instead. -
I am using Firefox 22 (I like its features and do not want the features added in later version.) I have added a handful of custom URL buttons to the navigation bar that allow me to go instantly to websites I visit frequently. There was/is a function in Firefox for adding such buttons. This morning, after leaving my computer on all night, I found that the custom buttons had disappeared and I could no longer find the function for adding new ones. Can you tell me what has happened and how I can add custom URL buttons? I will appreciate your help. Thank you.
I solved my own problem. This function was added by Google Shortcuts, which somehow became disabled. After fussing ariound for a few minutes. I was able to restore it.
-
HTML Snippet customized paypal buttons not showing correctly when published
Hi, My customized paypal buttons that i but on my iweb site using html snippets are not displaying correctly. They work in Opera but not in firefox or safari. Please take a look and tell me what you think might be wrong. (all the links are working it's just not showing the graphics correctly (apart from in Opera)
http://www.alisonbrent.com/ShopTableLamps.html
Also I've just noticed that when i return to my iweb application (after closing in down) the Html snippets aren't there anymore just an outline, just like they appear in safari?
Many thanks,
Ali
P.SBonjour
You inserted an image inside the ShopTable_Lampsfiles folder but it's is deleted every time you publish your page
1) Create an new folder named Paypal in your root folder:
FTP: With a FTP software (like Cyberduck) create a new folder in your server root folder
MobileMe: just make an new folder inside the Folder Sites (iDisk > Web > Sites)
Name this Folder "paypal"
2) insert your image "addtocartbutton.png" inside this paypal folder
Get the new URL of your image , something like
http://www.alisonbrent.com/paypal/addtocartbutton.png
3) Paste this URL in your codes, replace
src="http://www.alisonbrent.com/ShopTable_Lampsfiles/addtocartbutton.png"
by
src="http://the/new/URL/of/addtocartbutton.png" -
How do I get "custom label" button back on Contacts
I used to have "custom label" button for phone number tags on contact list. It is now gone. Any way to get it back. This started on my iPhone 4 and remains on my iPhone 5.
SOLUTION FOUND !!!
Go into settings and do this:
Settings --> Mail,Contacts,Calendars --> Default account (for Contacts)--> select "On My Phone"
this restored the custom labels button when creating new contacts. Somehow it was set to 'Hotmail" and i guess Hotmail does not support customized labels so it isn't offered when creating new contacts.That is what i a talking about. When i go to add a new contact and go to edit the label - the generic list of number types is present but the additional list of custom lables is not present - nor the button to create a new one. Some of my contacts do have the custom label present - old contacts created back when the buttons and label types were all there but it is no longer present when creating new contacts or editing contacts that were recently added.
-
Custom Push button on CAT2 t-code
Hi Experts,
There is a requirement in my project, where we need to add a custom push button in the application tool bar of CAT2 transaction.(This push button must be placed right next to the additional fields push button). When this push button is pressed, a pop up must be displayed with some details on fields.
There are three screen exits available for this screen.They are as follows:
CATS0005
CATS0007
CATS0012
Is it possible to add a custom push button in this standard application tool bar? If so, can you please help me in identifying the appropriate screen exit that can be used to achieve this requirement.
Also, the current system is in 4.6c version and the above requirement is to be implemented in 4.6c. In near future, there will be an upgrade to ECC 6.0 version. So it will be helpful if you can give me suggestion that is applicable in 4.6c and ECC 6.0 verison.
Thanks a lot in advance,
Regards,
DeepaDear Sreekanth,
In SAPLMEGUI program you suggested me that do SHD0 and add GUIXT to add new button.
What is SHD0 and GUIXT ?
How can i do this ? please explain me step by step ?
Regards,
K.Chinna -
MS CRM 2015 Adding Custom RIbbon button in dashboard and Changing Colors
Hi,
I am Looking for customization in MS Dynamics CRM 2015 and want to Add Custom Ribbon button in dashboard and Changing Colors of that ribbon using customization.xml i am new to crm 2015 and only know how to import export solutions.
Regards
IrfanHello Irfan,
For adding a custom button please refer this blog
https://community.dynamics.com/crm/b/aeonnexuscrm/archive/2014/10/21/ms-crm-2013-adding-custom-ribbon-button-in-dashboard.aspx
And for changing colors in Chart
https://crmchartguy.wordpress.com/2012/08/23/palette-custom-colors-in-charts/
Hope this helps!
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/ -
How To Use a Custom Close Button In Window Component
Hello,
I have a window component, with the default close button
turned off, and a new custom close button added to the movie clip
that is displayed inside the window component. How do I get a click
on the close button to close the window?
This is the code I currently have to create the window (and
the listeners to close the window using the default close button):basicalyyou have to use
myWindow.deletePopUp();
if my memory serves the content mc is loaded into a mc called
contentHolder, inside the window component, so
if you are referencing the window from the scope of your
loaded mc it will be
this._parent._parent.deletePopUp();
or if from the button's scope
this._parent._parent._parent.deletePopUp();
try traceing the parantage down til you hit the window. -
Not able to Enable the Custom Ribbon button On Pages in Sharepoint 2013
Hi Team,
Not able to Enable the Custom Ribbon button On Pages in SharePoint 2013. we have used the button edit properties section of the Pages.
Same is working for Lists but not for Pages.
Thanks,
ShrikantThanks for your reply.
Right now my server is not working to get the code. will share you in some time.
I am just thinking if page get checked out and my control is also present in the Edit properties section then do I need to specify something explicitly to enable the button. The same is working for Lists. -
Custom Toolbar Buttons - built from my SQL - feature request
I would like to request a feature to be added to SQL Developer. I'm on EA, v 4.0.0.12. I would like to be able to create edit and add custom toolbar buttons.
I do have some of my SQL saved as Snippets. As long as I want to keep the Snippets pane open, I can create and edit snipped categories, add snippets to custom categories, and drag'n'drop a snippet from the snippet pane onto a SQL Worksheet (fills in with the SQL). This all works, although giving up "canvas workspace" for the snippets pane is a bit of an expense.
It would be cool to be able to create, edit and place and remove custom buttons on the Toolbar with SQL I like to (re)use often.I found the Exchange and filed a request there.
For anyone wanting the URL for the Exchange feature requests, I used this:
https://apex.oracle.com/pls/apex/f?p=43135:6:104519160383376::NO
I do wish the Exchange were compatible with Firefox. I had to go to IE to add the request. -
!csComponentDataNotFound, when enabling a custom compoent in UCM 11g.
Hi,
I am seeing following exception when enabling custom component in UCM 11g (through component manager). Any pointers on what could be the issue.
intradoc.common.ServiceException: !csComponentDataNotFound, DV_Eloqua
After enabling when i restart the server, i don't see this exception again and in the component manager the component looks enabled.
Logs are not clear on what is causing this. Can i Ignore this?
Thanks in advance,
Seshan K.Hi,
I see this issue with install of all the custom components. The exception I pasted in previous post was just one of the many.
To give you some back ground,
This was done as part of migration effort from UCM 10gR3 to UCM 11g.
There custom components were developed for UCM 10gR3, we have updated the code to use RIDC and as part of migration to 11g.
Custom components were then installed to 11g using component manager.
This issue is not see in of the component installed, even that component was migrated from 10gR3.
Thanks and Regards,
Seshan K. -
Hello All,
I have custom ribbon button on editform/dispform in my list. I want to display current list name on button click of this custom ribbon button. How to achieve it??
Thanks in advance..!!Hey,
Did you ever tried this variables?
Anyways variable _spPageContextInfo.pageListId' works for me. It will give list GUID on listforms.
<CommandUIHandler Command="EditFormButtonCommand" CommandAction="javascript:window.open(L_Menu_BaseUrl + '/_layouts/incitemkt/downloadallattachments.aspx?ID=' + {ItemId} + '&source=' + _spPageContextInfo.pageListId);" />
Thanks.
Maybe you are looking for
-
Friends, My client's requirement is as below : Flat file to upload the PO will be provided with Old Part Numbers (MARA-BISMT) and not MATNR. Now they want to upload the Open PO with the same flat file. Is there any possibility to tackle this requirem
-
Macbook Pro, Summer 2012, ML 10.8.2 problem After the latest EFI Update
I have an ssd as my main hdd. ML 10.8.2, and also a bootcamp partition. I saw that an update was available for the efi firmware. i updated and immediately afterward, my laptop froze! I restarted, but now i couldnt boot into ML any longer. Havent been
-
Huge Difference in FPS from OSX and windows 8
I have a 2011 27" iMac with 6770m, 4gigs of ram, i5 (stock lower end 27")and windows 8 installed through bootcamp. I wanted to use it for gaming only to think that it was unusable. Recently I had realized that all I had to do was to lower the resol
-
Does anybody in this forum have problem with the netlet session timeout? We use Netlet to run Citrix applications behind the portal. The Netlet session gets killed at any moment in the range of 6 hours to 40 hours in the production environment. We us
-
How can I utilize the free space in external hard drive?
Hey, I have a 1T external usb harddrive and formated as NTFS. It has about 250GB free space and I am trying to see if I can utilize that space for timemachine backup? Please advise. /S